The laws for skateboarding helmets vary from state to state. Many states require that skaters wear a helmet under a certain age, and some states like California make all skaters under 18 wear a CPSC Certified helmet at all times. CSPC skateboard helmets usually have an EPS protective liner that meets the safety standards for skateboarding. Make sure you check your state's regulations before ordering.
Girl Skateboards, with its distinct “women’s bathroom” logo, is a brand distributed by Crailtap and founded in 1993 mainly by professional skateboarders Mike Carroll and Rick Howard and was created to give pro skateboarders a future. A “Girl” deck is made of seven-ply maple, which is strong and resistant. Decks can be customized in a wide variety of graphics or can feature the “Girl” logo. For those who don’t want to customize, complete skateboards are available that include the deck, wheels, trucks and bearings. Clothing, featuring the Girl logo, are available in a wide variety of styles. Not only does Girl distribute skateboards, but they also make films, videos and more. The Girl team consists of Sean Malto, Brandon Biebel, Andrew Brophy, Mike Mo Capaldi, Cory Kennedy, Rick McCrank, Jeron Wilson, Mike Carroll, Rick Howard, Tyler Pacheco, and Simon Bannerot.
Hardware won’t have an effect on your skating. Standard 7/8 - 1 inch hardware will work for most skateboards. However, if you use riser pads, be sure that you have long enough hardware to go all the way through the deck, trucks and riser pad. If you're unsure what length of hardware you need, give one of our experts a call at 888.450.5060 and we'll be stoked to help you out.
Their hard and soft goods feature 90’s imagery like Kurt Cobain with Courtney Love and Corey and Topanga from Boy Meets World, and it comes together to become pure fun for the hell of it. With brand mastermind Grant Yansura holding a spot as an official videographer for Nike SB, you know he must be doing something right with all his work. His Cosmic Vomit series is just another insight into the breadth of his great work.
Made with bamboo and fiberglass, this board is tough, flexible, and ready for anything. The construction is designed to feel and act like a snowboard. The drop-through design is perfect for freestyle longboarding, commuting, carving, pumping, and more. It gives you better stability and more wheel clearance. The board is definitely best designed for carving but tricks and kicks are easily done as well.
This board is an excellent option for beginners because of its simplicity and durability. The lightly concave design allows for simple turns but doesn’t require the rider to be an excellent navigator. You can start off riding this deck down the street and use it as you learn ollies, kickflips, and how to drop in to a half pipe. It will withstand it all and look good doing it.
Mixing a clean and colourful graphical identity with tongue-in-cheek parodies of existing brand logos (most notably the now largely discontinued Starbucks homage), Skateboard Cafe have carved a niche within the flooded UK skateboard market largely based on their skater-owned status, the lack of conceit in their identity and a regular and well-received output of video content.
The skateboard is directional, so if you’re skating switch the tail end will be forward, though, it makes for an easy switch heel flip. The deck itself is plastic. The skateboard dimensions are 3x6x22 inches. The wheels are 59MM urethane custom Skatro brand wheels. The bearings are ABEC 7 Skatro bearings. The trucks are 3 inches aluminum trucks. The board itself is only a light 4.7lbs and comes in one color.
The most recent Girl Films production, Pretty Sweet, signified a passing of the torch for one of the most talented skate teams in the biz. Some may have been disappointed to see Rick Howard and other OGs ride the bench, but new jacks like Alex Olson and Mike Mo Capaldi, and the Trunk Boyz Elijah Berle, Raven Tershy, Stevie Perez, Vincent Alvarez, and Cory Kennedy, leave little doubt that we're in for another 20 years of epic skating and killer goods.
It’s best to not go overboard with spending a lot of cash on your first skateboard. After all, it will take a lot of beating, and will surely be reduced to looking like a scratched plank of wood! Best skateboards to learn on include budget, beginner skateboards that offer you all the quality features a more expensive skateboard would, but at a lower expense. If you are new to skateboarding, it’s also recommended to get a skateboard with smaller wheels, since they go slower and are less intimidating!
Now given this guide is not for experienced and professional skaters, as per out brand rating criteria Plan B does not score that well mainly because of the issue that some skateboards come unassembled which can be overwhelming. If this were on an intermediate rider scale, then the brand score would have been much better. Anyways, here is the brand score of this amazing skateboard brand.
Mark Gonzalez created bLind Skateboards in 1989, and shortly after initiated a pro team for his skateboard brand. The bLind brand is known for higher durability due to their innovative features. The boards released by bLind are developed and marketed for hardcore skaters and top other skateboarding brands. We like that bLind goes all out providing one of the strongest boards out there, and without sacrificing the flex needed for tricks. They also do it all with a sick style and an innovative business plan that has made them one of the top skateboard brands.
The main feature of this longboard is its attractiveness. The color of the board is very vivid and pleasing. Also, the smoothness of the longboard is so much striking. Another unique thing that you will find with this longboard is its wheel bite is zero percent. If you want to attract the attention of the people with your longboard while spending reasonable money, this longboard is the best choice for you. Amazingly, even after one or two years, you will not find any crack on the board.
Omar Salazar suffered a bad knee injury recently and was sidelined from skating, allowing him to refocus his energy into running his company, Doomsayers. Following the demise of Alien Workshop and facing an uncertain future in the industry, Omar decided to really focus on a brand whose image is not shy about its disdain for corporate greed, which many people blame for the demise of his long time sponsor.
Where do you live? I forget that this is a global community. If you're US/CA I would recommend going to a local shop and testing some out and see what you like the most cause a Girl will be different from an Almost from an Expedition in very little ways that might turn you off the board shape more than their graphics/team. I would get between a 8" and 8.25" deck though.
Wedding Rodney Mullen‘s decades of technical experience regarding board shaping, concaves and the technical minutiae of skateboard manufacturing, (along with his huge fame and celebrated status as the father of modern street skating), with Daewon’s irrepressibly enthusiastic persona and supernatural skateboard talents, Almost was, from the outset, a brand predicated on celebrating the ‘fun’ side of skateboarding whilst simultaneously pushing the technical parameters of what could be done.
You should also look for the type of skateboard wheels that you will be getting with your skateboard. Soft wheels are great for cruising around uneven surfaces, while harder wheels are better for skateboard tricks and hard falls, which is vital for various skateboarding styles. The key thing to remember is the smaller wheels are slower, and bigger wheels are faster.
Manufacturers started to experiment with more exotic composites and metals, like fiberglass and aluminium, but the common skateboards were made of maple plywood. The skateboarders took advantage of the improved handling of their skateboards and started inventing new tricks. Skateboarders, most notably Ty Page, Bruce Logan, Bobby Piercy, Kevin Reed, and the Z-Boys started to skate the vertical walls of swimming pools that were left empty in the 1976 California drought. This started the "vert" trend in skateboarding. With increased control, vert skaters could skate faster and perform more dangerous tricks, such as slash grinds and frontside/backside airs. This caused liability concerns and increased insurance costs to skatepark owners, and the development (first by Norcon, then more successfully by Rector) of improved knee pads that had a hard sliding cap and strong strapping proved to be too-little-too-late. During this era, the "freestyle" movement in skateboarding began to splinter off and develop into a much more specialized discipline, characterized by the development of a wide assortment of flat-ground tricks.
Quartersnacks has been on one these past few years, making soft goods that will instantly make you look like you don’t actually suck at skating (me), and getting the honor of customizing their own Nike SB Dunk Low. Name another company in skateboarding that has that, and a book about their first decade of history coming soon through the world-renowned Random House publishing company? We’ll wait.
While the skate shoes design afforded better connection and traction with the deck, skaterboarders themselves could often be identified when wearing the shoes, with Tony Hawk once saying, "If you were wearing Vans shoes in 86, you were a skateboarder" Because of its connection with skateboarding, Vans financed the legendary skateboarding documentary Dogtown and Z-Boys and was the first sneaker company to endorse a professional skateboarder Stacy Peralta. Vans has a long history of being a major sponsor of many of skateboarding's competitions and events throughout skateboarding's history as well, including the Vans Warped Tour and the Vans Triple Crown Series.
This is the way most serious skateboarders buy new skateboards. In some cases they choose different brands for the wheels, bearings, trucks, deck, and hardware and customize it to their own unique style and preferences. The benefit to buying part like this you can replace only certain parts that are worn down and you have more control over each aspect of your skateboard. I recommend this approach to intermediate and advanced skateboarders who want to experiment with different brands and styles. However, if you are looking to try skateboarding for the first time or buy it as a gift for someone else I would recommend buying an already assembled complete skateboard.
In 2003 Go Skateboarding Day was founded in southern California by the International Association of Skateboard Companies to promote skateboarding throughout the world. It is celebrated annually on June 21 "to define skateboarding as the rebellious, creative celebration of independence it continues to be." According to market research firm American Sports Data the number of skateboarders worldwide increased by more than 60 percent between 1999 and 2002—from 7.8 million to 12.5 million.
In 1976, skateboarding was transformed by the invention of the ollie by Alan "Ollie" Gelfand. It remained largely a unique Florida trick until the summer of 1978, when Gelfand made his first visit to California. Gelfand and his revolutionary maneuvers caught the attention of the West Coast skaters and the media where it began to spread worldwide. The ollie was adapted to flat ground by Rodney Mullen in 1982. Mullen also invented the "Magic Flip," which was later renamed the kickflip, as well as many other tricks including, the 360 Kickflip, which is a 360 pop shove-it and a kickflip in the same motion. The flat ground ollie allowed skateboarders to perform tricks in mid-air without any more equipment than the skateboard itself, it has formed the basis of many street skating tricks. A recent development in the world of trick skating is the 1080, which was first ever landed by Tom Schaar in 2012.
The smaller the wheel diameter, the easier it is to do tricks, because it makes the board sit closer to the ground. But beginners will definitely have an easier time controlling a board with larger diameter wheels. Think of the larger wheels as being akin to training wheels. If you don’t want your board to have “pop” as you are learning, you can choose softer wheels, all the way down to a 73a. They won’t let you go as fast, and you’ll have to push off more often, but they do make it more likely that your board will stay on the ground.
Skateboarders like things that aren't skateboarding, too, you know. Camping, fishing, motorcycles… Uh, skateboarding? Crap. Whatever. Pro skater Adrian Lopez founded Loser machine and the Dark Seas Division as a way to explore other facets of the culture through cool clothing. Loser Machine is a complete collection that goes far beyond that typical tees, jeans, and hats formula that many skate apparel brands rely on—leather motorcycle gloves, denim vests, and floral print button-downs are all evidence that this is a well-conceived project from a skater with good taste.
Skateboarding is one of the most popular alternative sports around the world, for kids and adults alike. But before you hop on a board and take off, it’s important to choose the right kind of board for you. Most beginners will simply grab the board that they like the looks of, and with the endless array of deck art and styles that exist, that kind of attitude can lead to choosing a board that isn’t right to learn on.
Welcome is doing everything the way that people would probably tell you not to when it comes to how they run their board company. With no real full-length project out since it became a company, and with no pros to name, but boasting a full roster of official riders, Welcome is as unorthodox of a skate company as it gets. They don’t even make a single board in the traditional popsicle shape most boards are made today.
Tony Hawk and Per Welinder developed the Birdhouse Projects Skateboard Company following the decline professional skateboarding saw in the late 1980’s to early 1990’s. Tony Hawk gave the Birdhouse Projects name instant notoriety and made it into one of the professional skateboard brands in the world. Many skaters who have followed Hawk, have faithfully chosen a birdhouse skateboard. Birdhouse grabs the third place spot with their boards that are built to last and also provide maneuverability and for being a top rated skateboard brand.
Decks come in a variety of shapes and sizes. You can choose a mini-board, a cruiser, a drop-through, or a standard deck for your favorite set of wheels and hardware. Widths range too from a few inches with a 22-inch board to the wide size of a true cruiser. Some decks are flat as possible while others are significantly concave for optimized turning. You can buy a deck with artwork and grip tape already attached for a quick install or you can get a bare-bones wooden deck to truly customize.