“As far as the actual look of the vast majority of contemporary graphics goes, I’d say that it feels to me as if something has been lost. It’s down to what you can do with modern heat transfer printing techniques – you can literally just take a photograph from the Internet and print it identically straight onto a skateboard. Speaking personally, there’s very little to challenge you there: either from the point of view of creating graphics, or from the consumer’s perspective. Whereas back when screen-printing was the norm, every time a graphic was produced the artist was physically cutting the key line out by hand. The key line is the final black line that forms the outline of whatever it is that you’re printing and ties in all the other colours together. You can see this in the early Sean Cliver graphics for example, where it’s clear that he has hand cut the key lines as precisely as he was able to, but looked at from today’s perspective they’re not perfectly precise, which is what gives Cliver’s earliest stuff its specific look in my opinion.”
Punisher Skateboards Warphant measures 31 x 7.5 inch.  It has a 9-Ply Maple Black Board with Concave Deck and Double Kick Tail.  It comes with ABEC-3 Bearings, 5-inch V-style Heavy Duty Alloy Trucks, and Bases.  It uses 54 x 36 mm PU injection molded wheels and PE Riser Pad with PU Cushion and Punisher Logo.  It is perfect for learning and doing tricks.  It is best suited for riders who are 8 years old and above.  It has a 5 rating on Amazon.
The World Industries logo used to be the marker of a diehard skater, but recently it's gotten into the children's skateboard market too. Because of the brand's long history and trusted reputation in the skateboard community at large, the boards are generally good quality. However, remember that the brand usually caters to hardcore skaters; some parents may not approve of some of the brand's imagery. 
The Element Quadrant #14 board is 8-inches wide and 31.75-inches long, from nose to tail. This deck features a bare top that needs grip tape and a design on the bottom with four quadrants featuring the Element symbol in alternating red and black backgrounds. The wheelbase between the trucks is just over 14 inches while the nose is 7 inches and the tail is 6.325.

Amazing! Great pop and amazing concave. Last for a long time as long as you don't get the bamboo board. They have an earthy style like element, but with a better board quality. The only reason they are not #1 is because they aren't as well known. You cannot snap these boards! I have skated them for a couple of years because they are so good. BUY ELEMENT BOARDS! You wont regret it.

Decks come in a variety of shapes and sizes. You can choose a mini-board, a cruiser, a drop-through, or a standard deck for your favorite set of wheels and hardware. Widths range too from a few inches with a 22-inch board to the wide size of a true cruiser. Some decks are flat as possible while others are significantly concave for optimized turning. You can buy a deck with artwork and grip tape already attached for a quick install or you can get a bare-bones wooden deck to truly customize.
The “popsicle” deck is the most popular shape because of its versatility and durability. These decks resemble the shape of a popsicle stick because they feature both a nose and a tail that are exactly or nearly symmetrical. Since the nose and the tail are shaped about the same, it’s easy to do tricks no matter which direction you’re headed in. Most skateboarders stick to popsicle decks because of their functionality and reliability.
These are commonly found at walmart. Price is usually around $50, which is the price for a good set of longboard wheels. If you want a good longboard and you are on a budget, search for a bargain of a name brand on craigslist or other similar sites. Sometimes you find a jem forn cheap. I recommend buying a reasonably priced name brand such as flippin board co, landyachtz, or loaded . Hope this helps :—)
Made with bamboo and fiberglass, this board is tough, flexible, and ready for anything. The construction is designed to feel and act like a snowboard. The drop-through design is perfect for freestyle longboarding, commuting, carving, pumping, and more. It gives you better stability and more wheel clearance. The board is definitely best designed for carving but tricks and kicks are easily done as well.
If you're in the market for a skateboard for your child, there are some general points to keep in mind: A complete skateboard is one that comes fully built, size doesn't matter, and as with all things you buy, you get what you pay for. Conventional wisdom says to go with a good-quality board that will last longer and is safer. Here are some good choices to check out.
In 1975 skateboarding had risen back in popularity enough to have one of the largest skateboarding competitions since the 1960s, the Del Mar National Championships, which is said to have had up to 500 competitors. The competition lasted two days and was sponsored by Bahne Skateboards & Cadillac Wheels. While the main event was won by freestyle spinning skate legend Russ Howell,[30][31] a local skate team from Santa Monica, California, the Zephyr team, ushered in a new era of surfer style skateboarding during the competition that would have a lasting impact on skateboarding's history. With a team of 12, including skating legends such as Jay Adams, Tony Alva, Peggy Oki & Stacy Peralta, they brought a new progressive style of skateboarding to the event, based on the style of Hawaiian surfers Larry Bertlemann, Buttons Kaluhiokalani and Mark Liddell.[32] Craig Stecyk, a photo journalist for Skateboarder Magazine, wrote about and photographed the team, along with Glen E. Friedman, and shortly afterwards ran a series on the team called the Dogtown articles, which eventually immortalized the Zephyr skateboard team. The team became known as the Z-Boys and would go on to become one of the most influential teams in skateboarding's history.[27][33][34]
The logo is the powerful icon that represents the company's legacy, while graphic styles tend to ebb and flow. Just as skateboarding has evolved and changed over the decades, the skateboard logo has as well, for better and for worse. Picking out the top 50 logos in skateboarding isn't an easy task. Do you separate the logo from the company and base it on visual appeal? I think that's impossible given the nature of skating. Ultimately, these are logos from companies that built the landscape of skateboarding from the ground up. So you have to take into consideration the impact of the brand as well as the logo it represents. If a logo has personal importance to you, then that's all that matters. My list is only one opinion and forged from jumping into skateboarding in 1984.
Choosing a skateboard deck can be approached in a few different ways: you can choose your board based off the graphic, the brand, the shape, the width, or even the color. For most skateboarders, it’s a combination of all these factors, but if you’ve never skateboarded before, you may not know what shape, width, or brand you like best. In this case, choosing your favorite graphic would make total sense.

Amazing! Great pop and amazing concave. Last for a long time as long as you don't get the bamboo board. They have an earthy style like element, but with a better board quality. The only reason they are not #1 is because they aren't as well known. You cannot snap these boards! I have skated them for a couple of years because they are so good. BUY ELEMENT BOARDS! You wont regret it.
Baker’s first company video proper ‘Baker 2G‘, featuring the original team of Mike Maldonado, Jeff Lenoce, Andrew Reynolds, Jeff Lenoce, Erik Ellington, Alex “Trainwreck” Gall, Knox Godoy, Bryan Herman, Terry Kennedy, Evan Hernandez, Jim Greco and Dustin Dollin was released in 2000, still featuring the distinctive elephant logo created by former Reynolds’ associate Jay Strickland, who went on to start up Bootleg skateboards.
The logos you grow up with always mean more to you than the ones that came before or after. I'm not even going to suggest that I can be unbiased about something that means so much to me; but I also like to think that as a skater who has worked within the industry as an artist and a skate rat that grew up in the Midwest, I can separate my love of the activity from my personal feelings about the industry and companies. These are important logos for many reasons. Some are more powerful and meaningful than others but what I'm addressing are icons that have come to represent skateboarding in a lot of ways... succinctly and graphically.

Plan B originated out of Irvine, CA and was initially created by skating pro Mike Ternasky. Unfortunately, Ternasky was involved in a car accident in 1994 and didn’t make it. The Plan B team and the boards that have emerged as his legacy to become a top skateboarding brand. Though the Plan B team had to take some time off, so as to mourn and regroup, they have returned with a vengeance and have become known as one of the top skateboarding brands. We like Plan B because of the customizable element they bring to the skateboard market and their flexible decks that stand out above other skateboarding companies.
Skateboarding has also become a major source of inspiration for high-end fashion brands, as they design their own interpretations of the skate culture and style from graphic T-shirts, five-panel hats, cropped, wide-leg pants, and skateboarding sneakers from the brands like Vans. But there’s no faking the original, and the brands that do it best are the ones that have a long-time heritage in the sport of the board, unlike the luxury labels simply trying to capitalize on the look.
The core of the skateboard trucks is extremely lightweight, compared to the other skateboards we listed. They still sport a heavy-duty aluminum, but their initial design helps the skateboard be lighter and easier to pivot. It also arrives un-assembled which allows for the adult or child to have a sense of accomplishment when they put the board together. You will also be able to customize it to your heart’s content!
Our personal favorite is the Penny Australia Classic Complete Skateboard and trust me when I tell you this, it is the best skateboard for beginners. Hands down, we love how it is amazing to look at, very portable, excellent speed and has the greatest parts like hard wheels, 7 ABEC bearings and high tensile bolts. We love this board so much that it forms part of our best skateboards 2018 list as well.

What longboard brand is good? This is a common question that arises when you want to buy a Longboard. The typical answer is a Longboard brand which can fulfill the customer’s demand at an affordable price. Let’s examine all the leading longboard makers in the past year and until now. Let’s also take a look at their feature, quality, design, color, small parts, and many other relevant criteria.

The skateboard companies that are considered at the top include Element Skateboards. Founded by professional skateboarder Johnny Schillereff in 1992, the company’s goal was to expand on Johnny’s “Elementality” vision to build a company that helped to bring awareness to skateboarding. The goal is to focus on its uses in nature and the environment and the interconnecting of art and skateboarding. Developed from an urban mentality that was rough around the edges, the brand was transformed to embrace the “tree” logo with an emphasis on the positive and making the world a better place. A customer can purchase complete skateboards that include the decks, wheels, trucks, and bearings or they can customize a deck to suit their needs. Accessories and clothing are also offered. There are 20 professional skateboarders on the Elements team including such names as Brandon Westgate, Nyjah Houston, Mark Appleyard and Nick Garcia.

The smaller the wheel diameter, the easier it is to do tricks, because it makes the board sit closer to the ground. But beginners will definitely have an easier time controlling a board with larger diameter wheels. Think of the larger wheels as being akin to training wheels. If you don’t want your board to have “pop” as you are learning, you can choose softer wheels, all the way down to a 73a. They won’t let you go as fast, and you’ll have to push off more often, but they do make it more likely that your board will stay on the ground.
Without good grip tape, skaters have a tough time staying on top of their board. The main complaints about poor grip tape tend to be that it was never very grippy or lost its grip really quickly. Once again, we recommend trusting in name brands with years of experience supporting skateboarders. Unfortunately, if you are buying a pre-made complete skateboard, you probably won't have access to the brand name of the grip.  
×