The nose and tail of a standard skateboard curve upward slightly to make tricks easier to perform. On most decks, the nose and tail are shaped slightly different. The nose is usually wider, longer and steeper than the tail which aids in nose-based (nollie) tricks, and also helps you differentiate the nose from the tail. Some shaped boards have very different nose and tail dimensions, and some old school boards lack noses all together.
Element is of the most mainstream brands in the industry today that has sponsored legends like Nyjah Huston and Bam Margera.  There are many pro decks to choose from with some amazing tribal designs and they have introduced a “featherlight” technology that allows Element to have some of the lightest boards on the market today.  Some may call Element “too mainstream” or “sellouts”, but at the end of the day, they produce quality products in a variety of artistic designs.
Punisher Skateboards Warphant measures 31 x 7.5 inch.  It has a 9-Ply Maple Black Board with Concave Deck and Double Kick Tail.  It comes with ABEC-3 Bearings, 5-inch V-style Heavy Duty Alloy Trucks, and Bases.  It uses 54 x 36 mm PU injection molded wheels and PE Riser Pad with PU Cushion and Punisher Logo.  It is perfect for learning and doing tricks.  It is best suited for riders who are 8 years old and above.  It has a 5 rating on Amazon.
Well, independent skateboard brands, like Birdhouse skateboards or Blind Skateboards are prevalent. The DIY factor over the various skateboarding brands of course, acquires attention for the beginners in skating. But, for intermediate and expert level jumps, the names of best selling skateboard brands rule the market. Everyone considers the top 10 skateboard brands, but we have explained the top 12 skateboard brands for you. Why do we consider these top 12 skateboard brands? Well, our inclination lies in quality and efficiency. Whether, you belong to the beginner or expert level, whether you seek for the skateboard shoe brands or skateboard deck brands, we are here to assist you.
The World Industries logo used to be the marker of a diehard skater, but recently it's gotten into the children's skateboard market too. Because of the brand's long history and trusted reputation in the skateboard community at large, the boards are generally good quality. However, remember that the brand usually caters to hardcore skaters; some parents may not approve of some of the brand's imagery. 
Following Jason Dill and AVE leaving long time sponsors Alien Workshop back in 2013, Dill’s 13-year-old Fucking Awesome brand, which was formerly a clothing brand, became a board brand and began to add riders such as Dylan Rieder (RIP), Gino Iannucci, Jason Dill, Kevin Bradley, Nakel Smith, Sean Pablo, Sage Elsesser, Tyshawn Jones and Aiden Mackey.
The nose and tail of a standard skateboard curve upward slightly to make tricks easier to perform. On most decks, the nose and tail are shaped slightly different. The nose is usually wider, longer and steeper than the tail which aids in nose-based (nollie) tricks, and also helps you differentiate the nose from the tail. Some shaped boards have very different nose and tail dimensions, and some old school boards lack noses all together.

Are you on a hunt for the best skateboard on the market today? Then you are in the right place as this comprehensive article is designed to give you information about skateboarding and types of skateboards in general. By learning about the different types of skateboards and what each one can do, figuring out what works for you the best is a lot easier.

Thunder trucks are solid, with some great innovations. Thunder's light truck range claims ​to be the lightest available, with the quickest turning. Thunder's team is also pretty impressive, with Thomas, Appleyard, Marks, Steamer, Ellington. The list is actually pretty huge. If having a lot of pros ride the same trucks as you is important (which isn't a bad idea - these people are skating in competitions, and want the best!), then take a look at Thunder.

Based out of Huntington Beach, California, Good Skateboards is a grassroots inspired skate brand specializing in quality boards. Skateboarding isn’t about what you do, but how you do it. That’s Good Skateboard’s mission and they’re sticking to it! The brand is committed to supplying the skating industry with positive vibes and exceptional products that make you appreciate skateboarding all over again. Good Skateboards decks are constructed from 100% Canadian maple and made in the USA. Their decks are classic in board style and feature fun artwork from artist Vincenzo Colonna. In addition to decks, they also offer branded tees and accessories featuring their iconic “Ok” hand gesture logo. Good Skateboards t-shirts have similar graphics to what you see on their decks. You’ll see the same artwork on their stickers too!

The good news is that majority of skate shoes today come with high-quality flat soles that are capable of providing the maximum surface area designed to let you come in contact to the board, thereby promoting better control. Look for a really durable shoe, which you can wear comfortably to guarantee a safe and enjoyable experience when you are skateboarding.


The board also boasts of its reasonably small size and lightweight nature, making it easy to control and ride. In addition, carrying it wherever you want to go is also much easier because of its lightness. It is flexible enough that it can accommodate the needs of different kinds of users, including cruisers, travelers, beginners, expert riders, and kids.
Aside from keeping the more fashion-oriented side of skateboarding placated with ultrasoft crewnecks and clean 6 panel caps, Dime keeps the side of skating focused on actual footage and hijinks fed through their Instagram and Snapchat accounts (@dimemtl), where they post their day-to-day in Montreal doing what skateboarders do best: having fun with their friends.

In the past decade, I have begun seeing the emergence of skate decks being totally or partially made from carbon fiber or other metal materials instead of solely wood.  These decks typically last longer than regular wooden decks and aren’t prone to chipping or breaking like most made from wood.  The drawback to these materials is that they tend to feel “stiffer” than traditional wooden decks and experienced skaters may feel they are heavier and harder to do tricks on.  Carbon fiber decks are also more expensive, but this additional cost may be worth it if you tend to break decks easily.  Some brands also offer warranties against breakage under normal conditions for carbon fiber decks if you are worried about breakage.
A precursor to the extreme sport of street luge, that was sanctioned by the United States Skateboarding Association (USSA), also took place during the 1970s in Signal Hill, California. The competition was called "The Signal Hill Skateboarding Speed Run", with several competitors earning entries into the Guinness Book of World Records, at the time clocking speeds of over 50 mph on a skateboard. Due to technology and safety concerns at the time, when many competitors crashed during their runs, the sport did not gain popularity or support during this time.[36][37]

Bearings are standardized to fit in all kinds of skateboard wheels. All bearings will eventually get dirt and gunk in them which slows you down. Regular cleaning is recommended. Higher quality bearings will perform better, roll faster, retain more speed, and last longer when cleaned regularly. Some bearings come with bearing spacers or have spacers built into the bearing. These will fit in any wheel, but are not necessary for most types of skateboarding or longboarding.


If you want to do cruising and street style on the same board then you probably want a large board and larger wheels, as many have already commented. I think that an 8 inch board with at least 56 mm wheels will be best. I think that you should find a local shop to support and to talk to about gear. I would advise getting a shop deck, with Independent trucks (at the correct width for your board, which is one detail that a local shop should be able to help with) Bones street tech formula wheels (I like profiles 1 and, I think 5), and Bones Reds bearings (not super reds, super reds are not super).
^ Jump up to: a b c d e f "Skateboarding" (PDF). Pennsylvania Avenue National Historic Site Management Plan: Visitor Information, Education and Enjoyment. Washington, D.C.: National Mall and Memorial Parks: National Park Service: United States Department of the Interior. April 2014. pp. 24–25. Archived from the original (PDF) on March 4, 2017. Retrieved March 29, 2017. Skateboarding damages stonework, walls, steps, and sculpture in some areas and presents a persistent law enforcement and management challenge. Damaged areas include stone facing on memorials, benches, and other surfaces. Moreover, popular websites advertise the attractiveness of these areas for skateboarding, which indicates the large scope of this challenge. .... Actions: .... In park areas replace and maintain “No Skateboarding” signs that have been vandalized.
A magazine?! This is an outrage! Yeah, it is. But Low Card has become the defacto hat brand for all the cool hesh skaters in America, so deal with it. Also, the mag's graphic tees, baseball shirts, coaches jackets, and beanies are all highly dope. The custom mesh hat program is the way to go if you feel the need to wear your “yeah, I skate” calling card on your head.

It was a slow start for 3D, who had Alex Olson bail on them when they first started out before they could even get their first run of boards inside of shops, leaving the company at just two riders: Brian Anderson and Austyn Gillette. Now, due at least partially in part to Brian Anderson’s solidified status as a skateboarding legend, 3D has taken off and become an established brand that’s not taking itself too seriously, but still putting on for skateboarding. 3Ds first video offering, featuring amateur rider Tom Karangolov in a dreamy pink colorcast world, has even showed that they’re looking to shake things up in the stale footage side of skateboarding.


Destructo has some fancy skateboarding trucks. The Destructo raw series skate trucks come in low, medium and high designs and look oddly skinny. The Limited and Pro series trucks just look awesome, with simple pro signatures on the front and great color schemes. That's not to mention Destructo's "Rail Killer" series - these light trucks have extended baseplates to reduce wheelbite, and come in some incredible color schemes (including one using 24 karat gold!).
With distinctive graphics, often touching upon controversial issues such as racism with American society such as the infamous Jim Thiebaud ‘Lynch the KKK’ graphic designed by Natas Kaupas and Kevin Ancell, and classic Jeff Klindt graphics such as the James Kelch ‘James’ board, which was recently re-released, Real’s aesthetic has always been instantly recognisable.

That Captain America-esque deck, though, is where the real magic happens. It uses Plan B’s Blk Ice tech, which means it’s lighter than your average board, stronger than standard 7-ply maple, and it’s built to slide and pop like no other without any need to add wax. This also makes it more consistent; no extra slippery or sticky spots, just a smooth ride.
The first thing to consider is what kind of skateboarding you want to do. Do you want to skate your local skate park and learn tricks? Do you want something for commuting across town or campus? Or, would you enjoy charging down hills at high speeds? Take a look at the options below and note which features work well for the type of skating you want to do.

I rode for them as a ‘Amateur’ skateboarder in ‘79-’80, and they, at that time, had one of the Best boards out on the market, made of Fiberglass in a torsion box, with a foam core, and urethane ‘bumpers’ all around. I still have that board, and one set of C-70 Reds from then. I skated that gear hard, for many years, too. I still own 6–7 full sets of “krypto’s” for skateboards, and 8 that’re on quad-roller-skates. Great wheels, and they’re still in use.


Want the same great performance and high-quality construction as a name brand deck but don’t have a large budget?  Blank decks are your answer. Depending on the brand, blank decks can be similar or better than pro decks and are available in just as many or more shape options.  These decks are perfect for people who love skating and don’t really care about supporting a profession or the graphic on their deck.  Blanks are also great for aggressive skaters who go through decks quickly as many blank skateboard decks are sold in bulk packs of 3, 5, or even 10 decks per pack.
Founded in 2008 in Pennsylvania, Punisher’s goal has been to make graphically pleasing skateboards that have designs that resonate with the rider on a deeper level. Each artist is handpicked by Punisher to design an original, unique image that is then incorporated into the skateboard. The fantastic graphic designs combined with the quality of the skateboard itself make for a very personalized riding experience.
Hi Everyone! My name is Pete (yes, I’m a real person who lives in a cornfield just outside of Buffalo, NY – well, my house is in the middle of a cornfield!). As a former collegiate athlete in Iowa, I’ve played varsity basketball, volleyball and soccer. I also happen to be an outdoor adventure fanatic who’ll do whatever it takes to never miss my annual week-long wilderness canoe trip in the Northern Ontario wilderness. Sports equipment has come a long way over just the past few years, and I’d love to share with you the latest (and most competitively priced) products that will save you many of the frustrations I’ve dealt with over the years! Please feel free to cruise the site and drop me a line on the contact page if you have ideas for improvements or anything else! 
×