Canadian maple wood decks are the industry standard and is what the vast majority of decks on this list will be made of.  However, is the seller just says “maple” the deck is typically made in China and the wood may be slightly softer and lower quality.  This is more common among the lower cost blank decks, and most pro brands or higher end blanks are typically 100% Canadian maple.  In my opinion, the difference between Canadian and Chinese maple decks is slight and in many cases, a cheaper Chinese deck may be the better option for you if you have a small budget or tend to go through decks very quickly.
The Quest can be considered as the best improving Longboard brand because in 2014 it was in the 4th position, whereas in 2018 it is in 2nd place. This is a good improvement for a Longboard brand in these competitive days! Even though it is now in 2nd place, it has a little gap with Sector 9. They mainly focused on the customer’s needs by collecting client opinions. They have been improving the size, quality, performance, speed, design, and color of their longboards.
This article is about regular street skateboards.  They are rounded on both ends and curved upwards.  Sometimes beginners are confused by longboards that are much larger and irregularly shaped or cruiser board that can be very small.  I just wanted to clarify this point, as this article is very helpful for choosing the best skateboard for beginners, but may provide incorrect or unimportant information if you are actually looking for longboards or cruisers.

Independent has been making skateboarding trucks for over 25 years. Independent's Stage 9 truck series are quality made, lightweight and still durable. They also feature "Fast Action Independent Geometry," which means they are designed to react more quickly to your motions than other trucks. Independent trucks are usually on the wider side, but all sizes are available. Independent trucks are also guaranteed for life against manufacturer defects but should last forever anyway.

If you have a great passion for the downhill ride as well as cruising and you are a beginner of longboarding, then ultimately, this board can satisfy your needs. It’s a versatile board as you can use it for cruising and downhill riding. The board is equipped with the perfect wheel size — not so big and not so small. It is big enough to give you a smooth ride but it is not too big to get wheel bite. Isn’t it cool? The 44 inches size of its wheels is perfect for comfortable cruising as well as riding downhill. It has some flex which will reduce the stress on your ankle and knees.
The problem with wheel bite is that it tends to stop the motion of the wheels. This can result not only in a bad wipeout for the rider but also damage to the wheels. With the help of the riser pads, it is easier for you to preserve the deck of your skateboard since these pads can reduce the tendency of having stress cracks on where the trucks and deck meet.
Many jurisdictions require skateboarders to wear bicycle helmets to reduce the risk of head injuries and death. Other protective gear, such as wrist guards, also reduce injury. Some medical researchers have proposed restricting skateboarding to designated, specially designed areas, to reduce the number and severity of injuries, and to eliminate injuries caused by motor vehicles or to other pedestrians.[102]
Regardless of the length of these boards, they each have several components in common that include a deck, grip tape, trucks, and wheels. The deck is the actual surface piece of the board on which a rider stands to perform tricks or control their degree of motion. Decks range between seven and ten inches in width and although seven-ply wood is the most common material for them, they can also be crafted out of bamboo, carbon fiber, and even plastic. Decks are shaped in several unique concave designs, which include radial, progressive, W-concave, tub, and asymmetric. Radial concave decks have U-shaped curves and are ideal for beginners, as they provide one's feet with a reliable grip.
When looking at skateboarding’s history, the only thing that’s stayed the same is the overall structure: every board consists of four skateboard wheels, two skateboard trucks, and a riding surface of some kind. And while we’ve come a long way from the days of metal and clay wheels, some aspects of skateboarding - like the brands manufacturing some of the most trusted products - haven’t changed at all. Independent Trucks has been designing trucks since 1978. Powell Peralta, the company responsible for Powell Skateboards, Bones Wheels, Bones Bearings, and the Bones Brigade also started in 1978. NHS, Inc., the company that produces Santa Cruz Skateboards, Independent Trucks, Bronson Speed Bearings, Krux trucks, Flip Skateboards, Ricta Wheels, Mob Grip, and OJ Wheels started in 1973. It’s no wonder these brands are still doing so well - they’ve been with skateboarding since the beginning. Since the day skateboarding went from something surfers did when the waves were flat to its own sport that involves technique, practice, and careful consideration, a small handful companies have been there to help skateboarding become what it is today.

Progressive designs deliver a more dramatic upward curve and a wider base, providing increasingly secure footing and a locked-in feel. The W-concave shape is more narrow with an additional center curve, allowing for a greater shift in energy between the heel and toe. This design also boasts more responsive control and quick turning capabilities. Tub concave decks resemble the radial shape, however their rails extend at a sharp angle instead of a gradual curve. Asymmetrical decks feature rails that extend at different angles, affording more power to a rider's heels when making turns. Less commonly used are decks with convex and completely flat shapes. Convex boards offer an upwards-arching shape, which some downhill skateboarders prefer for a more natural feel, whereas flat designs increase available foot space and are more popular for experienced riders looking to perform fancy tricks.
Progressive designs deliver a more dramatic upward curve and a wider base, providing increasingly secure footing and a locked-in feel. The W-concave shape is more narrow with an additional center curve, allowing for a greater shift in energy between the heel and toe. This design also boasts more responsive control and quick turning capabilities. Tub concave decks resemble the radial shape, however their rails extend at a sharp angle instead of a gradual curve. Asymmetrical decks feature rails that extend at different angles, affording more power to a rider's heels when making turns. Less commonly used are decks with convex and completely flat shapes. Convex boards offer an upwards-arching shape, which some downhill skateboarders prefer for a more natural feel, whereas flat designs increase available foot space and are more popular for experienced riders looking to perform fancy tricks.
Manufacturers started to experiment with more exotic composites and metals, like fiberglass and aluminium, but the common skateboards were made of maple plywood. The skateboarders took advantage of the improved handling of their skateboards and started inventing new tricks. Skateboarders, most notably Ty Page, Bruce Logan, Bobby Piercy, Kevin Reed, and the Z-Boys started to skate the vertical walls of swimming pools that were left empty in the 1976 California drought. This started the "vert" trend in skateboarding. With increased control, vert skaters could skate faster and perform more dangerous tricks, such as slash grinds and frontside/backside airs. This caused liability concerns and increased insurance costs to skatepark owners, and the development (first by Norcon, then more successfully by Rector) of improved knee pads that had a hard sliding cap and strong strapping proved to be too-little-too-late. During this era, the "freestyle" movement in skateboarding began to splinter off and develop into a much more specialized discipline, characterized by the development of a wide assortment of flat-ground tricks.
The core of the skateboard trucks is extremely lightweight, compared to the other skateboards we listed. They still sport a heavy-duty aluminum, but their initial design helps the skateboard be lighter and easier to pivot. It also arrives un-assembled which allows for the adult or child to have a sense of accomplishment when they put the board together. You will also be able to customize it to your heart’s content!

Whilst this A – Z is by no means exhaustive and there are many brands, both new and old that are not included, we feel that this cross section of companies represents a selection of some of the best choices out there today. The following list of 29 skateboard brands, beginning with Alien Workshop and ending with Zero, covers a huge range of the alternatives within the current market and will hopefully act as a handy guide to those dipping their feet into our world for the first time.

×