The growth of the sport during this period can also be seen in sales figures for Makaha, which quoted $10 million worth of board sales between 1963 and 1965 (Weyland, 2002:28). By 1966 a variety of sources began to claim that skateboarding was dangerous, resulting in shops being reluctant to sell them, and parents being reluctant to buy them. In 1966 sales had dropped significantly (ibid) and Skateboarder Magazine had stopped publication. The popularity of skateboarding dropped and remained low until the early 1970s.[7][25][26]
If you love the outdoors, traveling in style, and prefer to have as much control over your mode of transportation as possible, a skateboard is just what you need. Not just for high school kids or sports celebrities like Tony Hawk, the skateboard can be a useful and fun tool that can take you wherever you need to go, while also being a great outlet for the release of energy.
The best criticism you could make about skateboarding in general right now is that it takes itself too seriously. Rightfully so. Skateboarders are often under attack, and what they do is illegal in most places. Skate culture is constantly being ripped off and bastardized. That's why it's so important to have a healthy sense of humor about it all, and that's why it's important that skateboarding has Roger.
Tensor trucks are the most highly engineered skateboard trucks on the market. Tensor trucks are like the Cadillac of trucks and have the brilliance of skateboarding legend / engineer Rodney Mullen as a driving force. Tensor trucks come in both standard and low designs, and should work excellently in most skateboarding situations. Sort of a perfect all-round well-built skateboarding truck.
Go for the low truck profile if you want to obtain additional stability when you do flip tricks. It also works well for small wheels. The mid-sized trucks are good for all-around use, especially in streets and parks. You can also choose the high-sized trucks that are good for carving and cruising, which is the reason why they are perfect for huge wheels.

Severe injuries are relatively rare.[103] Commonly, a skateboarder who falls suffers from scrapes, cuts, bruises, and sprains.[103] Among injuries reported to a hospital, about half involve broken bones, usually the long bones in the leg or arm.[102] One-third of skateboarders with reported injuries are very new to the sport, having started skating within one week of the injury.[102] Although less common, involving 3.5–9 percent of reported injuries, traumatic head injuries and death are possible severe outcomes.[102]
This board is an excellent option for beginners because of its simplicity and durability. The lightly concave design allows for simple turns but doesn’t require the rider to be an excellent navigator. You can start off riding this deck down the street and use it as you learn ollies, kickflips, and how to drop in to a half pipe. It will withstand it all and look good doing it.

Keep in mind how tall you are when choosing a board width. Also consider the kind of style you wish to skate. Most technical skaters (the ones who incorporate advanced flip tricks... like Rodney Mullen) tend to favor boards between 7.5 and 7.75 regardless of how tall or small they happen to be. The upper hand of having a thin board allows for quick rotation. The other side of the spectrum is the "go big" skaters (Jamie Thomas is a classic example of a "go big" guy). Most "go big" guys favor size 8.0 and up. The advantage of a wide heavy board feels more stable under your feet while in mid air and while landing (especially those who have big feet). If your a kid you might want to just stick with a 7.66 or smaller.

Bearings are rated by the ABEC scale (1-9), which has nothing to do with skateboarding. Manufacturers know skaters believe higher ABEC ratings mean faster bearings. They do not, and you won’t find high-quality bearings on off-the-shelf skateboards. Most of these completes are slow. Make a bearing upgrade a top priority. Good bearings can make almost any skateboard fast. This article by longtime pro Anthony Pappalardo gives an insider’s perspective on bearings.
FTC was cool before there were skate and hype blogs around to tell you that they were cool. Mastermind Kent Uyehara built his brand from the back of a sporting goods shop into an international symbol of cool, with franchise locations in Sacramento, Tokyo, and Barcelona. FTC isn't just the go-to spot for skate gear in those cities-it's a full-blown brand that any skater would be proud to wear.
HUF has clearly mastered the streetwear game and has moved on to trying to master the skate shoe game. The addition of Dylan Rieder and Austyn Gillette to their roster, and their subsequent pro shoe model releases have shown that they’re a brand that’s not afraid to take risks and try something new, pushing a fashion forward image supported by a group of guys who you might feel you can wreck in a fight, but who will probably steal your girl even after you punch their face in.
Zero Skateboards is one of the American top companies for skateboards that comes out of California. The brand, representing by a skull logo, was founded by professional skateboarder Jamie Thomas and is distributed by Dwindle Distribution. The Zero brand is about rebellion and freedom of expression despite society’s rules. The company offers complete skateboards that come with the deck, wheels, trucks, and bearings, as well as decks you can customize, accessories and clothing. In addition to Thomas, the Zero team is Tommy Sandoval, Dane Burman, James Brockman, Tony Cervantes, Windsor James, Adrian Lopez, Chris Wimer, and Kurt Hodge.
Its All Powell-Peralta Ligament decks feature a wider and more robust polymeric strap. The ligament strap is so powerful that in case your board breaks, the ligament strap will hold your deck together to allow you to ride out of it. Ligament decks are same in weight as a 7-ply maple deck but provide more pop and stiffness that lasts longer than ordinary boards.

If you decide that you don’t want to spend the money for a pro-quality complete, then this is your best bet for a completely blank skateboard.  You’re just not going to find anything else with similar quality anywhere near this price range.  This blank skateboard is an even 8″ with 9 layers of plywood in the deck.  This makes it ideal for any beginner especially adults or children with large feet.  A great option for someone on a budget or if you want to try a no-frills quality skateboard setup, before deciding if you want to invest further on a pro-style skateboard.

The Skatro Mini Cruiser Skateboard includes Abec 7 Skatro Bearings, 59MM Urethane Skatro wheels, and 3-inch lightweight aluminum trucks.  The Skatro Flexy Technology ensures optimal flex on every board. Skatro outperforms most of the leading brands and it has an amazing value.  You can take this board on the subway, plane, train, and even on the bus.  It includes a color matching T-tool.  It has the best rating of 4.8 on Amazon.


If you are eager to have a new skateboard and need to take into consideration your budget, then Landwalker’s skateboard is the prefect board for you, based on personal preference. It’s by far one of the cheapest products on this list, while still giving you sufficient endurance and quality performance. Thanks to the high-density wood, you can rest assured that even if you fall, your skateboard will remain to be in one piece. Preassembled completes are ready to take out onto the road.
Skateboarding, as we know it, was probably born sometime in the late 1940s, or early 1950s,[citation needed] when surfers in California wanted something to do when the waves were flat. This was called "sidewalk surfing" – a new wave of surfing on the sidewalk as the sport of surfing became highly popular. No one knows who made the first board; it seems that several people came up with similar ideas at around the same time. The first manufactured skateboards were ordered by a Los Angeles, California surf shop, meant to be used by surfers in their downtime. The shop owner, Bill Richard, made a deal with the Chicago Roller Skate Company to produce sets of skate wheels, which they attached to square wooden boards. Accordingly, skateboarding was originally denoted "sidewalk surfing" and early skaters emulated surfing style and maneuvers, and performed barefoot.[6][9][11]
Minority Maple Skateboard is an aesthetically engineered, quality starter skateboard. It is solid to the core. It is made with 7-ply hard rock maple cold pressed into 32×8-inch deck. It is built to endure weight up to 220 lbs. Its mediate concave design makes it perfect for performing tricks with ease and dexterity. Its 5-inch long trucks made with genuine aluminum alloy makes it an epitome of strength and endurance. Its carbon steel kingpin and 78A high rebound PU bushing adds to its strength. ABEC-9 precision bearings are manufactured using chrome steel with 52mm 102A PU wheels making the Minority Maple Skateboard a speedster.
Despite what many young skaters may think, there is more to choosing a skateboard deck than the graphic on the bottom of the pro skater the deck company sponsors.  The best skateboard deck varies from person to person depending on external factors such as the rider’s weight, skate style, shoe size, and budget.  Person preferences can also impact the decision.  For example, you may want to support your favorite pro skateboarder, so you buy their pro deck.
(2) Goldchain, Michelle (July 31, 2018). "Why is Pennsylvania Avenue's Freedom Plaza such a failure?". Greater Greater Washington. Retrieved October 30, 2018. One group of people do use Freedom Plaza regularly: skateboarders. The open hardscape and railings of Freedom Plaza make an excellent and popular skate park, though skating there is not actually allowed and Park Police regularly chase skaters from the park.
Serving skateboarding since 1976, we now offer the finest complete range of skate products in the world, handcrafted to serve skaters from their first skateboard to the top professional level. Our mission is to make the best skate equipment you can buy. If you don’t already know what you want, let us help you select the skateboard components that will enable you to take your skating to the next level. Whether you’re a first-time customer or a loyal fan, we’re proud to serve you.
As with all penny boards, the Fade has a waffletop on the deck so that you have plenty of grip and stability as you ride. The plastic material of these boards is durable enough to withstand being run over, and the trucks and wheels are of similar high quality. This board is not made for the beginner that wants to skate downhill or do a lot of speedy skating – the short length makes it dangerous for that. But if you’re just interested in commuting and want something portable, this is a great choice.
Destructo has some fancy skateboarding trucks. The Destructo raw series skate trucks come in low, medium and high designs and look oddly skinny. The Limited and Pro series trucks just look awesome, with simple pro signatures on the front and great color schemes. That's not to mention Destructo's "Rail Killer" series - these light trucks have extended baseplates to reduce wheelbite, and come in some incredible color schemes (including one using 24 karat gold!).
Founded by English freestyle skater, engineer and skateboarding entrepreneur Jeremy Fox in 1987 (Fox is also reputed to be the first person to import skateboard specific footwear ‘Pro-Keds’ into the UK) Deathbox in its heyday was one of only a handful of European brands that ever controlled enough market share to be a significant player in the skateboard industry.

The good news is that majority of skate shoes today come with high-quality flat soles that are capable of providing the maximum surface area designed to let you come in contact to the board, thereby promoting better control. Look for a really durable shoe, which you can wear comfortably to guarantee a safe and enjoyable experience when you are skateboarding.


Certain cities still oppose the building of skate parks in their neighborhoods, for fear of increased crime and drugs in the area. The rift between the old image of skateboarding and a newer one is quite visible: magazines such as Thrasher portray skateboarding as dirty, rebellious, and still firmly tied to punk, while other publications, Transworld Skateboarding as an example, paint a more diverse and controlled picture of skateboarding. As more professional skaters use hip hop, reggae, or hard rock music accompaniment in their videos, many urban youths, hip-hop fans, reggae fans, and hard rock fans are also drawn to skateboarding, further diluting the sport's punk image.
Almost every skate shop will have a wall of boards that is either organized by brand, size, or alphabetically. At our CCS skate shop, we have multiple walls of boards that we try and keep ordered alphabetically. A wall of skateboards, at first glance, can be overwhelming, but if you know what size and roughly what brands you like, it should be fairly easy for you to figure out what board you want. Now would be a good time to mention our CCS Skateboard Buyer’s Guide, specifically the Decks Guide. In the CCS Decks Guide, you’ll find all the information you need to gain a basic understanding of skateboard decks.
In the ever-volatile skateboarding industry, brands come and go, then come back again, only to go out once more, and eventually make room for the next person who is really in tune with what skateboarding is today. While no two brands can really be compared, the true signifier of their importance in skateboarding is how they can make a difference in the culture and bring something new to the table that hasn’t been done before. Every single brand on this list has been a part of something unique that has made us pay attention to them above all the others out there doing it in this saturated market.

This is the way most serious skateboarders buy new skateboards.  In some cases they choose different brands for the wheels, bearings, trucks, deck, and hardware and customize it to their own unique style and preferences. The benefit to buying part like this you can replace only certain parts that are worn down and you have more control over each aspect of your skateboard.  I recommend this approach to intermediate and advanced skateboarders who want to experiment with different brands and styles.   However, if you are looking to try skateboarding for the first time or buy it as a gift for someone else I would recommend buying an already assembled complete skateboard.
In 1975 skateboarding had risen back in popularity enough to have one of the largest skateboarding competitions since the 1960s, the Del Mar National Championships, which is said to have had up to 500 competitors. The competition lasted two days and was sponsored by Bahne Skateboards & Cadillac Wheels. While the main event was won by freestyle spinning skate legend Russ Howell,[30][31] a local skate team from Santa Monica, California, the Zephyr team, ushered in a new era of surfer style skateboarding during the competition that would have a lasting impact on skateboarding's history. With a team of 12, including skating legends such as Jay Adams, Tony Alva, Peggy Oki & Stacy Peralta, they brought a new progressive style of skateboarding to the event, based on the style of Hawaiian surfers Larry Bertlemann, Buttons Kaluhiokalani and Mark Liddell.[32] Craig Stecyk, a photo journalist for Skateboarder Magazine, wrote about and photographed the team, along with Glen E. Friedman, and shortly afterwards ran a series on the team called the Dogtown articles, which eventually immortalized the Zephyr skateboard team. The team became known as the Z-Boys and would go on to become one of the most influential teams in skateboarding's history.[27][33][34]
Both your height and weight should play an important role when you are choosing a skateboard. You need to find a skateboard, which fits your weight and height. Picking one, which is either too small or too big might only cause you to experience difficulty controlling it, especially if you are still a beginner learning the ins and outs of skateboarding.
It can be a bit obscure when Fergus Purcell and Will Bankhead design new Palace decks. The fact that the boys meet the Zeitgeist is proved by the step-up of the London brand by three places compared to last year. Nevertheless, these decks belong on the street. Just ask Benny Fairfax, Lucien Clarke, Danny Brady and Co. – Palace Decks are offered from 59,99 € | 50.00 GBP!
A skateboard is a special type of sports equipment crafted from a long piece of maple wood with a polyurethane coating for increased durability and easy sliding while in motion. The wood is attached to four wheels and propelled forward by either the push of a rider's foot or by the gravitational forces acting upon them in a given circumstance, which means that a rider can simply stand on the board's surface and ride it downhill without using their feet at all. Skateboards are available as either long boards or short boards. Long boards are usually between thirty-five and sixty inches long and are ideal for cruising purposes and downhill racing. They are typically more expensive than short boards, which are around thirty inches long and are designed for getting air and performing stunts or tricks.
Another bonus of shopping at an actual skate shop is that you get to see what the boards look like in person. Most skate shops will have a cool wall of boards, and it's fun to just stand there and look at all the graphics. If one jumps out and grabs you, then you can ask the shop owner about the brand, and whether it's a good one. There's nothing wrong at all with buying a skateboard deck because you like the graphics!
Manufacturers started to experiment with more exotic composites and metals, like fiberglass and aluminium, but the common skateboards were made of maple plywood. The skateboarders took advantage of the improved handling of their skateboards and started inventing new tricks. Skateboarders, most notably Ty Page, Bruce Logan, Bobby Piercy, Kevin Reed, and the Z-Boys started to skate the vertical walls of swimming pools that were left empty in the 1976 California drought. This started the "vert" trend in skateboarding. With increased control, vert skaters could skate faster and perform more dangerous tricks, such as slash grinds and frontside/backside airs. This caused liability concerns and increased insurance costs to skatepark owners, and the development (first by Norcon, then more successfully by Rector) of improved knee pads that had a hard sliding cap and strong strapping proved to be too-little-too-late. During this era, the "freestyle" movement in skateboarding began to splinter off and develop into a much more specialized discipline, characterized by the development of a wide assortment of flat-ground tricks.
Grip tape adds additional assurance for a rider's feet. It is made from a sheet of colored paper or fabric with adhesive on one side and a fine, sand paper surface on the other. Applied to the top surface of a skateboard, grip tape gives a person's feet an improved grip while maintaining stability for performing tricks. Skateboard trucks connect both the wheels and ball bearings to the deck and are directly attached to the deck themselves. They are usually constructed from aluminum alloy. The wheels are mounted to their axles via steel bearings. The wheels are made from polyurethane and available in a range of different shapes and sizes to suit most any skill level.
With Enkeeo 22 Inch Cruiser Skateboards, you can cruise in style.  It has a dimension of 22 x 6 inches.  It comes with 3″ Black Coated Habitat trucks, Black 60mm Smooth wheels, and Abec11 bearings. It’s ready to ride and you can even personalize the tail of the board for free with a limitation of 10 Characters only. It has 30 days warranty and is manufactured in California.  It has a perfect 5 rating on Amazon.
Girl skateboards are know for their witty graphics and high quality canadian maple decks. This specific complete features Mike Carroll’s pro deck and it comes fully assembled directly from the manufacturer (Girl).   The reason this is such a great option for beginners is that all parts of this complete are truly pro quality and it’s built to last.  The width is also perfect for all ages and shoe sizes at a moderate 7.8″.  Definitely a great skateboard for beginners if you like the graphic and logo.
The National Skate Co‘s approach to marketing retained this air of intrigue with the release of their first video, ‘The National Skateboard Co. Promo‘ in 2013 with minimal promotion beforehand. This promo video featured lo-fi VX2000 footage of original team members Thomas Harrison, Danijel Stankovic, David Mackey, Joshua Young, Vaughan Jones and Neil Smith interspersed with found footage and black and white news reel clips.
There are a lot of good skateboard brands out there. For a start, you can check out this list of Top Skateboard Deck Brands, but there are piles of other brands out there that are great. There are local brands, brands from other countries, and brands that you or I have never heard of. Aside from a skateboard company's reputation for quality and good design, a brand is also a brand; that is, it comes with its own character and cred. You might like a brand simply for what it represents, whether that's the company's attitude or its team or its presence at the skate park. The first step in choosing a brand is getting out there and seeing what's available.   
A skateboard is fundamentally a sum of its parts. If you want a good skateboard, you’ll want each component to be high quality. We’ll take a look at each part of a skateboard and talk about what quality means for the that component. We’ll try to give tips on how to spot a high or low quality implementation of that component and then we’ll share how SkateXS Skateboards measure up.  
Skateboards can be bought online and in your local stores.  However, choosing a good skateboard can be challenging.  If you are a beginner there are a lot of things that you have to consider.  Aside from the cost, you should also check the entire board such as the wheels, the deck, the trucks, and others.  Here, we have compiled the best skateboards for sale that you can choose from right now.
This article is about regular street skateboards.  They are rounded on both ends and curved upwards.  Sometimes beginners are confused by longboards that are much larger and irregularly shaped or cruiser board that can be very small.  I just wanted to clarify this point, as this article is very helpful for choosing the best skateboard for beginners, but may provide incorrect or unimportant information if you are actually looking for longboards or cruisers.
Here's a list of the best skateboard truck brands (read about Trucks in the Skateboard Dictionary). Trucks can be expensive, and picking out the right set of skate trucks can seem tough. But, if you get a pair of trucks off of this list, you should be good. There are other brands that are good quality too, but each of these brands has something that helps it to really stand out. These aren't put in any particular order.
In this modern era, manufacturers are incorporating hi-tech processes and top-shelf materials into the construction of the skateboard. Companies such as Almost have several versions of hi-tech decks such as the Impact, Double Impact, and Uber Light Series. Element makes Highlight decks with inlayed fiberglass beams, and Foundation has its signature Fiberprime decks. Other manufactures such as Flip, Habitat, Plan B, Skate Mental, and Zero offer boards with high-end P2 Construction. Hi-tech decks differ from traditional 7-ply Maple in that they are inlayed with Carbon Fiber, Fiberglass, Poly Ply, or Kevlar to produce a stronger skateboard with more pop. For more options, head over to our stellar selection of Hi-Tech Decks! Although hi-tech decks have made a strong presence within the market, standard 7-ply Maple remain the gold standard. This is due to the solid feeling and pop afforded through layering 7 Maple wood veneers together. The large majority of skateboard decks offered are constructed of 7-ply Maple. Most board manufacturers offer both high-tech decks and standard 7-ply Maple. No matter what you desire, CCS offers a complete selection in multiple sizes, shapes, and construction types!
What longboard brand is good? This is a common question that arises when you want to buy a Longboard. The typical answer is a Longboard brand which can fulfill the customer’s demand at an affordable price. Let’s examine all the leading longboard makers in the past year and until now. Let’s also take a look at their feature, quality, design, color, small parts, and many other relevant criteria.
The Golden Dragon is a fantastic board for beginners, and it’s all in the wheels. The high-rebound polyurethane wheels are hand-cast and offer amazing grip as you ride, plus fantastic roll. The deck itself is just slightly longer than a standard skateboard, which offers a bit more stability for beginners, who might be worried about sliding or slipping off a shorter board. Additionally, this board features the All Powell-Peralta Ligament strap, an important safety feature that keeps the deck together if it should break. This helps prevent injury and provides a little more peace of mind for the rider.
×