Modern decks are made with a composite of thin layers of either maple or bamboo pressed into a near symmetrical shape with a nose equal to or longer than the tail. The deck should be concave (subtle U shape) along the whole board with both the nose and tail angled upwards (the "kick" of the board). Conceptually while the skateboard is a platform, it also serves to cup the balls of the skater’s feet with rising sides, nose and tail providing the foundation for pretty much all modern skateboard tricks.


Remember don't get those cheap skateboards from Walmart. They won't hold up to any skating and can break from a single ollie that is landed improperly. I know they are cheap, but 2 cheap boards a week for a few weeks adds up to the price of 2 or 3 expensive boards. These boards are also heavier and slow which makes them much more difficult to do tricks on.
A skateboard consists of a deck, trucks, wheels, bearings, hardware, and griptape. All parts come in a variety of sizes, graphics, colors, and signature pro series. The deck is the essential part of any skateboard. The deck ranges generally from 7.5" to 8.5". Skaters choose their board size for many reasons, but the basic deciding factor comes down to style of skating and foot size. Transition skaters usually ride a wider deck, while street skaters tend to go with a smaller deck. Skate brands such as Girl, enjoi, and Welcome offer a wide range of boards in regards to sizes and graphics. Skateboard trucks come in either a high or low setting, and also in a range of widths. The main factors in a truck, are how well they turn, and how well they grind. Independent, Venture, and Thunder, are truck brands that are well known for their turning and grinding capabilities. The skate hardware is generally either Phillips head or Allen key bolts. The skateboard wheels range from 50mm to 60mm. Some brands offer smaller and larger sizes, but 50-60mm is the general range. Like the deck sizes, wheel sizes depend on the skater's choice of terrain: Transition skaters tend to ride bigger wheels, while street skaters usually go with smaller wheels. Bones, Spitfire, Ricta, and Wayward wheel companies all make wheels for any terrain, whether you're a street shredder or a park burner. Skate bearings follow the ABEC rating system, which includes grades 1, 3, 5, 7, and 9. Bones, Bronson, and Andale are some of the top bearing brands in the skate market. CCS proudly carries all these brands, and many more.

Founded by English freestyle skater, engineer and skateboarding entrepreneur Jeremy Fox in 1987 (Fox is also reputed to be the first person to import skateboard specific footwear ‘Pro-Keds’ into the UK) Deathbox in its heyday was one of only a handful of European brands that ever controlled enough market share to be a significant player in the skateboard industry.


As your skateshop, we know that the list of skateboard and streetwear brands on the current market seems to be endless. To make it easier for you, we have the best and most famous European and American skateboard and skatewear brands at the skatedeluxe skateshop. Besides the biggest and best companies in the world, we also have a selection of smaller and uprising companies in stock that are worthy to represent your lifestyle.
If you’re a beginner and you want a board that gives you a little of everything to discover, you cannot go wrong with this ENJOI board. You get everything you need, all ready to go out of the box, and made with professional-grade components. The ENJOI also earns points for having that classic cool artwork on the deck that makes it fun to show off at the park.
Sizing plays an important role in the performance of any deck. A large majority range in size from 7.75" to 8.5" in width. These will provide a great platform for shredding any obstacle and will excel in street and skatepark environments alike. For those who prefer a smaller board, decks are offered down to 7.5" in width- benefiting people with smaller feet or the technical skater. Conversely, those looking for a wider board will enjoy our selection ranging up to 8.9" wide. Larger decks will accommodate those with very large feet, as well as offer an amazing experience for cruising and shredding large ramps and transitions.

Pro Skateboarder, Jamie Thomas developed the Zero brand in Carlsbad, CA and has built it into one of the top skateboard brands. Though the Zero brand initially distributed clothing, it eventually evolved to boards designed to suit the need for any tricks performed. The Zero team is comprised of a close group of skateboard professionals that have turned their passion into a company dedicated to provide the latest in skateboard innovation and helped Zero Skateboards become a fantastic skateboard brand. Zero boards are great for maneuvers, stability and especially grinds, with their specially designed features. Their innovation and high-quality designs has made Zero Skateboards one of the good skateboard brands today.
Krown’s motto is to provide quality skateboards on a budget. They manage that surprisingly well; not only are their products at budget prices, but they can take quite a lot of beating too. Their skateboards arrive readily assembled and ready to ride. You won’t have to spend hours fiddling with screws and bolts to ride your new prized possession! No matter if you are a beginner or an expert looking for a good board to ride on, Krown’s product is made to fit everyone’s needs.
Freestyle skating remained healthy throughout this period, with pioneers such as Rodney Mullen inventing many of the basic tricks that would become the foundation of modern street skating, such as the "Impossible" and the "kickflip". The influence that freestyle exerted upon street skating became apparent during the mid-1980s; however, street skating was still performed on wide vert boards with short noses, slide rails, and large soft wheels. In response to the tensions created by this confluence of skateboarding "genres", a rapid evolution occurred in the late 1980s to accommodate the street skater. Since few skateparks were available to skaters at this time, street skating pushed skaters to seek out shopping centers and public and private property as their "spot" to skate. (Public opposition, in which businesses, governments, and property owners have banned skateboarding on properties under their jurisdiction or ownership, would progressively intensify over the following decades.)[40][41] By 1992, only a small fraction of skateboarders continuing to take part in a highly technical version of street skating, combined with the decline of vert skating, produced a sport that lacked the mainstream appeal to attract new skaters.
First, you’ll need to consider the size of the skateboard. Most skateboards are about eight inches wide, but if you have very large feet, or you really want to feel very stable as you learn, consider going with something wider. Remember that the wider you go, the harder it is to learn tricks and to go around curves. If you want to rotate your board mid-air during a jump, you need a board that is no wider than eight inches.
It’s best to not go overboard with spending a lot of cash on your first skateboard. After all, it will take a lot of beating, and will surely be reduced to looking like a scratched plank of wood! Best skateboards to learn on include budget, beginner skateboards that offer you all the quality features a more expensive skateboard would, but at a lower expense. If you are new to skateboarding, it’s also recommended to get a skateboard with smaller wheels, since they go slower and are less intimidating!
It can be frustrating to choose the top skateboard brand for your needs with so many brands bubbling up in the market. How do you separate the top brands from the average ones? How does a customer know which skateboard brand will give them their money’s worth? Just to help you guys answer all those questions at one place, we came up the easiest solution.
Skateboard hardware is used to connect the skateboard trucks to the skateboard deck. Skateboard hardware refers to the bolts and locknuts used when building a board. The bolts can have an Allen or Phillips head. Skateboard hardware comes in many different lengths, and often includes one different colored bolt so that the rider can mark the nose of their board.
Following stints on the US brands Mad Circle and Arcade and a pro model on the then hugely popular European brand Cliche skateboards, Pontus Alv quit his board sponsor and moved back to his hometown of Malmo, Sweden in the early to mid 00’s. During this time Pontus took what might be called a creative hiatus but which would be more accurately explained as a re-connection with his roots. After returning to Malmo, Alv became heavily involved in building and creating the scene there, working alongside friends to build a number of DIY skatespots through the city such as the now legendary Savanna-side and Steppeside projects.
Buy a quality deck. Decks available at your local department store are usually of low quality and have pictures of cartoon characters on the bottom. If you want an entire board, but don't know exactly what you want, buy a complete skateboard from a company or go to a skate shop and ask the employee about the products. If you want to ride on the streets, get a 7.5 to 8.0 deck, if you want to ride vert, 8.0 and up is probably best. However, it's all personal preference. People street skate all the time with decks over 8.0.

The G & S video ‘Footage’ (created by Mike Hill and Neil Blender and released in 1990 just prior to them leaving to start their own brand) set the precedent for Alien Workshop’s later video aesthetic with the use of non-skate footage intercut throughout the skate sections and the mysterious, almost otherworldly atmosphere that permeates all of Alien Workshop’s subsequent video releases. To many people ‘Footage’ is the pre-cursor to every Alien video release that followed in its wake.
×