In 2003 Go Skateboarding Day was founded in southern California by the International Association of Skateboard Companies[53] to promote skateboarding throughout the world. It is celebrated annually on June 21 "to define skateboarding as the rebellious, creative celebration of independence it continues to be."[54][55][56][57][58] According to market research firm American Sports Data the number of skateboarders worldwide increased by more than 60 percent between 1999 and 2002—from 7.8 million to 12.5 million.[59]
Grip tape adds additional assurance for a rider's feet. It is made from a sheet of colored paper or fabric with adhesive on one side and a fine, sand paper surface on the other. Applied to the top surface of a skateboard, grip tape gives a person's feet an improved grip while maintaining stability for performing tricks. Skateboard trucks connect both the wheels and ball bearings to the deck and are directly attached to the deck themselves. They are usually constructed from aluminum alloy. The wheels are mounted to their axles via steel bearings. The wheels are made from polyurethane and available in a range of different shapes and sizes to suit most any skill level.
The smaller the wheel diameter, the easier it is to do tricks, because it makes the board sit closer to the ground. But beginners will definitely have an easier time controlling a board with larger diameter wheels. Think of the larger wheels as being akin to training wheels. If you don’t want your board to have “pop” as you are learning, you can choose softer wheels, all the way down to a 73a. They won’t let you go as fast, and you’ll have to push off more often, but they do make it more likely that your board will stay on the ground.

The Powell Golden Dragon 2 Skateboard is an affordable and complete skateboard for the beginners and also for the advanced skaters.  It has high-rebound, hand-cast polyurethane wheels to give you a great roll and grip.  It measures 7.5 inches wide with a colorful screen-printed bottom.  It is made in China and has an average rating of 4.2 on Amazon.

Top Ten Worst Companies In the U.S.Best Skateboarding BrandsBest BMX Bike BrandsmcarzwashereBest Scooter BrandsBest Brands of Mountain BikesBest Lego ThemesTop 10 Best Assault RiflesRotorheadTop 10 Best Nerf GunsTop 10 Things to Buy with $100Best Knife CompaniesTop Ten Best Cigarette BrandspreachinpreachTop 10 Most Needed Survival SuppliesTop Ten Electronics BrandsMatrixGuyTop 10 Best Airlinescarvandog

Skateboarding damages urban terrain features such as curbs, benches, and ledges when skateboarders perform "grinds" and other tricks on these surfaces.[112] Private industry has responded to this problem by using skate deterrent devices, such as the Skatestopper, in efforts to prevent further damage and to reduce skateboarding on these surfaces.[112]
Manufacturers started to experiment with more exotic composites and metals, like fiberglass and aluminium, but the common skateboards were made of maple plywood. The skateboarders took advantage of the improved handling of their skateboards and started inventing new tricks. Skateboarders, most notably Ty Page, Bruce Logan, Bobby Piercy, Kevin Reed, and the Z-Boys started to skate the vertical walls of swimming pools that were left empty in the 1976 California drought. This started the "vert" trend in skateboarding. With increased control, vert skaters could skate faster and perform more dangerous tricks, such as slash grinds and frontside/backside airs. This caused liability concerns and increased insurance costs to skatepark owners, and the development (first by Norcon, then more successfully by Rector) of improved knee pads that had a hard sliding cap and strong strapping proved to be too-little-too-late. During this era, the "freestyle" movement in skateboarding began to splinter off and develop into a much more specialized discipline, characterized by the development of a wide assortment of flat-ground tricks.
Skateboarding, in one form or another, has been around since the late 1950’s when the first brave pioneer first attached roller skate wheels to a piece of wood. As skateboarding progressed to mimic surfing, skateboards evolved with the style of riding. Skateboards grew and changed shapes as riders experimented with everything from plastic to fiberglass to aluminum constructions - all in an effort to push what was possible. Like most sports or art forms, progression is at the heart of skateboard innovation.
Remember the cool skate kids wearing Workshop tees in the '90s? Well you don't see too many of those these days, but AW is still one of the best “big” skate brands going. The team alone—featuring Supreme muse Jason Dill, tech-gnar wizard Anthony Van Engelen, and the most handsome guy on a board, Dylan Rieder—puts the brand in the top 10. And even though you might not associate legacy riders like Rob Dyrdek with anything cool at all, he pulled one of the most boss moves in all skate business history when he bought the brand that first sponsored him 20 years ago back from Burton (who bought the brand from Chris Carter in 2008) last year, so Workshop is once again skater-owned.
Hey, are you looking for a great fun with a fantastic ride? If YES, then longboarding will be the best option for you to realize all of your dreams. Longboarding is an effective form of physical exercise. You can also save money if you will use it when going to a nearby place. Also, if longboarding is your passion and if you are looking for the best longboard, you are in the right place to get additional information about longboards.
Let’s now move on to our top pick from the Punisher line, the Punisher Cherry Blossom Complete skateboard (31 inch). Hands down, the Punisher Cherry Blossom skateboard is the best skateboard for girls. And I am not just saying this because the cherry design would look best for girls, it has some incredible features and specifications. We love the 9-ply stiff maple deck with a beautiful cherry design. The deck is also covered with coarse grip tape which gives the skateboard excellent grip and it makes it a good ride for girls too.
^ Jump up to: a b Costello, Becca (November 10, 2005). "Skateboarding is not a sport: Skateboarding the Sacramento streets takes skill, balance and nerve. Just don't call it a sport". Sacramento News & Review. Retrieved December 10, 2012. Despite stickers, posters and T-shirts stating the contrary, it turns out that skateboarding is, in fact, a crime. “In the downtown district, you can skateboard as transportation,” Rafter explained. “Anything other than all four wheels on the ground and getting to where you’re going, they have a problem with.”
The grip tape found on a skateboard can actually be defined as the grainy sheet, which resembles sandpaper that also comes with a sticky underside. Such underside needs to adhere to the deck’s surfaces as a means of increasing traction or grip. No matter what skating style you use, the grip tape is extremely helpful in your attempt to stay on the board.
Freedom Plaza has become a popular location for skateboarding, although the activity is illegal and has resulted in police actions.[5][115] A 2016 National Park Service management plan for the Historic Site states that skateboarding has damaged stonework, sculptures, walls, benches, steps, and other surfaces in some areas of the Plaza.[5] The management plan further states that skateboarding presents a persistent law enforcement and management challenge, as popular websites advertise the Plaza's attractiveness for the activity.[5] The plan notes that vandals have removed "No Skateboarding" signs and recommends the replacement of those signs.[5]

Severe injuries are relatively rare.[103] Commonly, a skateboarder who falls suffers from scrapes, cuts, bruises, and sprains.[103] Among injuries reported to a hospital, about half involve broken bones, usually the long bones in the leg or arm.[102] One-third of skateboarders with reported injuries are very new to the sport, having started skating within one week of the injury.[102] Although less common, involving 3.5–9 percent of reported injuries, traumatic head injuries and death are possible severe outcomes.[102]

The wheelbase of a skateboard deck is the distance between the centers of the inner most truck mounting holes. This distance ranges between 13.5 to 16 inches and is generally proportional to the deck length on standard popsicle decks. Some specially shaped boards and cruiser decks have differing length/wheelbase ratios. Wheelbase can impact stability and turning radius, but the effect is often subtle and not a major concern for a beginner.
As your skateshop, we know that the list of skateboard and streetwear brands on the current market seems to be endless. To make it easier for you, we have the best and most famous European and American skateboard and skatewear brands at the skatedeluxe skateshop. Besides the biggest and best companies in the world, we also have a selection of smaller and uprising companies in stock that are worthy to represent your lifestyle.
Pro Skateboarder, Jamie Thomas developed the Zero brand in Carlsbad, CA and has built it into one of the top skateboard brands. Though the Zero brand initially distributed clothing, it eventually evolved to boards designed to suit the need for any tricks performed. The Zero team is comprised of a close group of skateboard professionals that have turned their passion into a company dedicated to provide the latest in skateboard innovation and helped Zero Skateboards become a fantastic skateboard brand. Zero boards are great for maneuvers, stability and especially grinds, with their specially designed features. Their innovation and high-quality designs has made Zero Skateboards one of the good skateboard brands today.
Our personal favorite is the Penny Australia Classic Complete Skateboard and trust me when I tell you this, it is the best skateboard for beginners. Hands down, we love how it is amazing to look at, very portable, excellent speed and has the greatest parts like hard wheels, 7 ABEC bearings and high tensile bolts. We love this board so much that it forms part of our best skateboards 2018 list as well.
Destructo has some fancy skateboarding trucks. The Destructo raw series skate trucks come in low, medium and high designs and look oddly skinny. The Limited and Pro series trucks just look awesome, with simple pro signatures on the front and great color schemes. That's not to mention Destructo's "Rail Killer" series - these light trucks have extended baseplates to reduce wheelbite, and come in some incredible color schemes (including one using 24 karat gold!).
Great option for a beginner who wants a pro deck and doesn’t mind non-pro branded parts.  Enjoi is very well known by skateboarders and the panda logo will be recognized everywhere.  This particular deck is 7.75″ wide which is why I think it’s the best as it can be skater by any size person comfortably.  One slight downside to this setup is that the board comes unassembled, however many skaters enjoy putting together their own skateboards and it can be done in just a few minutes by following a YouTube video.  You won’t go wrong with such a well-respected brand and average size, this is actually the exact skateboard I decided to buy for my nephew a few years ago and he absolutely loved it!
The Bamboo Skateboards Galaxy Series Cosmic Cloud Skateboard Deck is an excellent option. This concave board is made exclusively of a bamboo hybrid, rather than pure maple. This means the deck is lighter, stronger, more flexible, and can even absorb shock better. The non-carbonized, light-wood deck is made of 6-ply wood and is in its fourth generation of designs.

In 2003 Go Skateboarding Day was founded in southern California by the International Association of Skateboard Companies[53] to promote skateboarding throughout the world. It is celebrated annually on June 21 "to define skateboarding as the rebellious, creative celebration of independence it continues to be."[54][55][56][57][58] According to market research firm American Sports Data the number of skateboarders worldwide increased by more than 60 percent between 1999 and 2002—from 7.8 million to 12.5 million.[59]
SkateXS has been widely known to be the best brand for kids that are looking to advance their skateboarding skills. These skateboards have been designed with children in mind. That’s why there are many customizable features that you can pick when purchasing this product. If you are an avid skateboarder and want to introduce your kids to skateboarding, or just a parent that has been hearing about skateboards for weeks now, you can safely pick this product by SkateXs to help your kids safely advance in their skateboarding skills.

Pro Skateboarder, Jamie Thomas developed the Zero brand in Carlsbad, CA and has built it into one of the top skateboard brands. Though the Zero brand initially distributed clothing, it eventually evolved to boards designed to suit the need for any tricks performed. The Zero team is comprised of a close group of skateboard professionals that have turned their passion into a company dedicated to provide the latest in skateboard innovation and helped Zero Skateboards become a fantastic skateboard brand. Zero boards are great for maneuvers, stability and especially grinds, with their specially designed features. Their innovation and high-quality designs has made Zero Skateboards one of the good skateboard brands today.
The G & S video ‘Footage’ (created by Mike Hill and Neil Blender and released in 1990 just prior to them leaving to start their own brand) set the precedent for Alien Workshop’s later video aesthetic with the use of non-skate footage intercut throughout the skate sections and the mysterious, almost otherworldly atmosphere that permeates all of Alien Workshop’s subsequent video releases. To many people ‘Footage’ is the pre-cursor to every Alien video release that followed in its wake.
×