Typically when looking at different completes you will see size dimensions in the format of ~7-8 x 31-34″. This measurement is referring to the width and length of the skateboard deck. Typically all other parts are relatively standard and the deck size is the main thing to look for. Standard skateboard widths for beginners are between 7.5-8.25 with smaller boards being better for younger and smaller guys. You don’t really have to worry about length much as long as it’s shaped regularly. You may hear about the concave of the deck or a special type of board construction, but for the most part, it will not matter much to a beginner. If you have no idea what size would be best you will never go wrong with a 7.5 or 7.75.
These are commonly found at walmart. Price is usually around $50, which is the price for a good set of longboard wheels. If you want a good longboard and you are on a budget, search for a bargain of a name brand on craigslist or other similar sites. Sometimes you find a jem forn cheap. I recommend buying a reasonably priced name brand such as flippin board co, landyachtz, or loaded . Hope this helps :—)
Krooked’s video release to date include ‘Krooked Kronichles‘ (2006), the experimental ‘Krooked – Gnar Gnar‘ (2007) only released on VHS in limited numbers, predating the explosion of interest in the outdated VHS format as foregrounded by brands such as Palace skateboards some years later, ‘Krooked – Naughty‘ (2008) and Krooked – Krook3D (filmed in both regular and 3D formats) (2010).
Skateboard decks width is probably one of the most important factors to consider when buying a deck. Decks typically range from 7.25-8.5″. 7.5″,7.75″, and 8.0″ tend to be the standard widths if most decks and the general rule is that the bigger your feet are the wider the deck you should get. Thinner decks are slightly easier to flip, however they are harder to land on due to the decreased surface area. This is a tradeoff you have to consider, but the typical rule of thumb for younger guys is that you get wider decks the more advanced and larger you get. Street skaters typically also like smaller decks as they are easier to navigate and carry around in crowded cities and areas.
The best thing to do when getting a new board is to go to your local skate shop and talk to the people there -- they are usually very helpful. The guys at the shop will be able to tell you what board will be good for your skating needs. Keep in mind different people have different opinions on board brands. People say Plan B's are good, but I know others that say it's not. Some like DGK boards, some don't. Just test the board out and see how it suits you. You may want to double check this if you are being extremely careful with your selection.
Figuring out how to buy a skateboard can be daunting, especially if you’re not sure what you are looking for. There are customizable parts, accessories and some fancy technology that can be overwhelming. Good news is, we can simplify it for you! At Tactics, our crew is full of daily skaters, so we put our heads together to break it all down and give you the basics, plus a few recommendations.
Decks come in a variety of shapes and sizes. You can choose a mini-board, a cruiser, a drop-through, or a standard deck for your favorite set of wheels and hardware. Widths range too from a few inches with a 22-inch board to the wide size of a true cruiser. Some decks are flat as possible while others are significantly concave for optimized turning. You can buy a deck with artwork and grip tape already attached for a quick install or you can get a bare-bones wooden deck to truly customize.