Ever notice small vertical or horizontal cracks through your grip tape or by the hardware of your trucks?  These are called stress or pressure cracks and are basically mini fractures of your skateboard deck that typically are seen in the areas of the deck that withstand the greatest impact (around the trucks).  A few pressure cracks is generally no big deal and you won’t even notice them while skating, but they can compound and grow larger and make your deck lose “pop” and increase the chance of snapping.  To avoid pressure cracks, you cant use riser pads underneath your trucks to reduce the level of impact your deck takes.  You should also avoid over tightening your hardware and storing your skateboard in a very humid place as both of these practices can also make your board weaker and more susceptible to pressure cracks.
The laws for skateboarding helmets vary from state to state. Many states require that skaters wear a helmet under a certain age, and some states like California make all skaters under 18 wear a CPSC Certified helmet at all times. CSPC skateboard helmets usually have an EPS protective liner that meets the safety standards for skateboarding. Make sure you check your state's regulations before ordering.
A skateboard is fundamentally a sum of its parts. If you want a good skateboard, you’ll want each component to be high quality. We’ll take a look at each part of a skateboard and talk about what quality means for the that component. We’ll try to give tips on how to spot a high or low quality implementation of that component and then we’ll share how SkateXS Skateboards measure up.  
Decks come in a variety of shapes and sizes. You can choose a mini-board, a cruiser, a drop-through, or a standard deck for your favorite set of wheels and hardware. Widths range too from a few inches with a 22-inch board to the wide size of a true cruiser. Some decks are flat as possible while others are significantly concave for optimized turning. You can buy a deck with artwork and grip tape already attached for a quick install or you can get a bare-bones wooden deck to truly customize.
Phantom 2 trucks have a low profile, are lightweight and have a nice smooth edge for grinding. They also just look nice. The thing that sets Phantom trucks (both regular Phantoms and Phantom 2s) are their built in shock pads. Phantom calls it an "Impact Dispersion System," a 1.5 mm rubber shock pad built onto the bottom of the trucks. Shock pads help reduce stress from the trucks to the board.
Want the same great performance and high-quality construction as a name brand deck but don’t have a large budget?  Blank decks are your answer. Depending on the brand, blank decks can be similar or better than pro decks and are available in just as many or more shape options.  These decks are perfect for people who love skating and don’t really care about supporting a profession or the graphic on their deck.  Blanks are also great for aggressive skaters who go through decks quickly as many blank skateboard decks are sold in bulk packs of 3, 5, or even 10 decks per pack.
Progressive designs deliver a more dramatic upward curve and a wider base, providing increasingly secure footing and a locked-in feel. The W-concave shape is more narrow with an additional center curve, allowing for a greater shift in energy between the heel and toe. This design also boasts more responsive control and quick turning capabilities. Tub concave decks resemble the radial shape, however their rails extend at a sharp angle instead of a gradual curve. Asymmetrical decks feature rails that extend at different angles, affording more power to a rider's heels when making turns. Less commonly used are decks with convex and completely flat shapes. Convex boards offer an upwards-arching shape, which some downhill skateboarders prefer for a more natural feel, whereas flat designs increase available foot space and are more popular for experienced riders looking to perform fancy tricks.
The first skateboards started with wooden boxes, or boards, with roller skate wheels attached to the bottom. Crate scooters preceded skateboards, having a wooden crate attached to the nose (front of the board), which formed rudimentary handlebars.[6][7][8] The boxes turned into planks, similar to the skateboard decks of today.[9] An American WAC, Betty Magnuson, reported seeing French children in the Montmartre section of Paris riding on boards with roller skate wheels attached to them in late 1944.[10]

It's apt that Tribute has taken an umbrella as the company logo. In a city that rains as much as Portland, skaters don't have too much to be stoked about. But that has done nothing to deter one of the strongest skate scenes in the US, which has the notorious Burnside skatepark, awesome brands like Tribute, and local rippers like Brent Atchley at its core.
Where do you live? I forget that this is a global community. If you're US/CA I would recommend going to a local shop and testing some out and see what you like the most cause a Girl will be different from an Almost from an Expedition in very little ways that might turn you off the board shape more than their graphics/team. I would get between a 8" and 8.25" deck though.
Swing boarding is the activity where a skateboard deck is suspended from a pivot point above the rider which allows the rider to swing about that pivot point. The board swings in an arc which is a similar movement to riding a half pipe. The incorporation of a harness and frame allows the rider to perform turns spins all while flying though the air.
The logos you grow up with always mean more to you than the ones that came before or after. I'm not even going to suggest that I can be unbiased about something that means so much to me; but I also like to think that as a skater who has worked within the industry as an artist and a skate rat that grew up in the Midwest, I can separate my love of the activity from my personal feelings about the industry and companies. These are important logos for many reasons. Some are more powerful and meaningful than others but what I'm addressing are icons that have come to represent skateboarding in a lot of ways... succinctly and graphically.
It can be a bit obscure when Fergus Purcell and Will Bankhead design new Palace decks. The fact that the boys meet the Zeitgeist is proved by the step-up of the London brand by three places compared to last year. Nevertheless, these decks belong on the street. Just ask Benny Fairfax, Lucien Clarke, Danny Brady and Co. – Palace Decks are offered from 59,99 € | 50.00 GBP!
What began life as a screen-printing business back in 2001 has organically morphed into one of the UK’s most celebrated low-key bedroom brands. After completing a screen-printing and fine arts degree Stuart Smith set up Lovenskate to offer bespoke screen printing services to the skateboard industry and beyond from inside his parents garage. Over time, Lovenskate grew and formally metamorphosed into a skateboard brand back in 2001.
Zoo York originated in 1993 and is based out of New York. Its name and signature name came from the underground subway tunnel dubbed as Zoo York. The tunnel runs under the Central Park Zoo, however it’s primarily known from the graffiti subculture of the 1960’s and the 1970’s. The Zoo York tunnel was a prime hangout of its day and was originally tagged by some of the first east coast graffiti artists. Zoo York carries a unique style from the subway tunnel days, and it comes through in their graphics and street skating designs; not to mention their high durability design. They round off our list of the 10 top skateboard brands in the market. Zoo York is an innovative company that has worked its way up to being one of the best skateboard brands in the world.
Launched in 1991 by professional skateboarder Mike Ternasky who was killed in a car accident in 1994, Plan B Skateboards was renewed in 2005 by professional skateboarders Danny Way and Colin McKay. The top Skateboards brand, recognized by its unique logo, offers customization, but it also produces skateboards that come already assembled and ready for immediate action with everything a skateboarder needs including the deck, wheels, trucks, and bearings. The decks are made with a durable and thick seven-ply maple. They are also designed for you to make them uniquely yours with cool graphics that reveal your personality. In addition to the decks, Plan B also produces wheels, toolkits, and the kind of hip clothing that every skateboarder wants to be seen wearing. In addition to Way and McKay, the Plan B team consists of pro skateboarders PJ Ladd, Chris Cole, Pat Duffy, Ryan Sheckler, Torey Pudwill, Leticia Bufoni, Chris Joslin, Felipe Gustavo and Sean Sheffey.
“The skateboard industry’s current focus on performance by displaying almost exclusively difficult tricks, whether technical or dangerous, is not something we relate to on our daily experience on our boards. We feel that skateboarding has much more to offer than being only a sport. It has cultural, social, artistic, sociological values and much more and it seems all these aspects are being widely overlooked by the industry. Magenta is our outlet for representing the wide spectrum of possibilities that skateboarding carries within itself.”
As your skateshop, we know that the list of skateboard and streetwear brands on the current market seems to be endless. To make it easier for you, we have the best and most famous European and American skateboard and skatewear brands at the skatedeluxe skateshop. Besides the biggest and best companies in the world, we also have a selection of smaller and uprising companies in stock that are worthy to represent your lifestyle.

Our only issue with Penny skateboards is that they are sold without grip tape. Though not necessary, it can make the ride a lot safer with grip tape. All in all, Penny is one of the top skateboard brands out there. Let us now look at a succinct brand scorecard of Penny Skateboards and see how it scores in various factors that we have considered while ranking the best skateboard brands.

The skateboard is directional, so if you’re skating switch the tail end will be forward, though, it makes for an easy switch heel flip. The deck itself is plastic. The skateboard dimensions are 3x6x22 inches. The wheels are 59MM urethane custom Skatro brand wheels. The bearings are ABEC 7 Skatro bearings. The trucks are 3 inches aluminum trucks. The board itself is only a light 4.7lbs and comes in one color.


I'm 31 years old and just started skateboarding for the first time I bought a creature because of the p2 kevlar veneer they throw in before the final veneer goes on plus the nose is a little less tapered then the tail making it slightly bigger but the pop I get or the spring is nutty you can feel the board torgue up power in the tail just before you launch very happy with my puchase salvatore rochester ny
Next, you’ll need to look at the deck material. Decks are typically wooden or plastic, but they may also be made of materials like carbon and fiberglass. Plastic boards, like the pennyboard, are more affordable, and still very durable, but many adult riders find that they can look a bit like a child’s toy rather than a “real” skateboard. Wood is the most popular choice for most skateboards, although if you want to invest in the pricier fiberglass or carbon options, you’ll get a very good quality deck for your money.
Ever notice small vertical or horizontal cracks through your grip tape or by the hardware of your trucks?  These are called stress or pressure cracks and are basically mini fractures of your skateboard deck that typically are seen in the areas of the deck that withstand the greatest impact (around the trucks).  A few pressure cracks is generally no big deal and you won’t even notice them while skating, but they can compound and grow larger and make your deck lose “pop” and increase the chance of snapping.  To avoid pressure cracks, you cant use riser pads underneath your trucks to reduce the level of impact your deck takes.  You should also avoid over tightening your hardware and storing your skateboard in a very humid place as both of these practices can also make your board weaker and more susceptible to pressure cracks.
If you want to be able to practice your new hobby anywhere and everywhere, the Fade is an excellent choice. This is a short skateboard that measures only 27 inches long, made of lightweight (yet still durable) plastic. That means it’s easy to toss into a backpack and carry with you on your commute, to school, or anywhere. It’ll also fit into a locker at the gym or school quite easily.
The “popsicle” deck is the most popular shape because of its versatility and durability. These decks resemble the shape of a popsicle stick because they feature both a nose and a tail that are exactly or nearly symmetrical. Since the nose and the tail are shaped about the same, it’s easy to do tricks no matter which direction you’re headed in. Most skateboarders stick to popsicle decks because of their functionality and reliability.

Skateboard Cafe’s video releases to date include the initial Skateboard Cafe Promo (2012) featuring the original team of Harry Ogilvie, Shaun Currie, Josh Arnott, Tom Gibbs, Louis Marshall and Pat Garrahy plus associated friends. This was followed by Skateboard Cafe’s first full-length video ‘Alfresco‘ in 2015, followed by a rash of single rider and tour-based video releases since. Skateboard Cafe are also notable for conducting every aspect of their business in-house with all video, design and product sourcing undertaken by the owners, as well as using video look-books to promote each new drop of Skateboard Cafe product.


Rarely you make notice your deck to lose concavity or flatten over time.  Although this isn’t very common, it’s typically due to water damage and is a sign of many other problems.  Wooden decks are not meant to get wet and they will warp, crack, and break if they get soaked.  It’s pretty simple and straightforward  to avoid this problem.  Keep your skateboard in a dry place, and don’t skate in the rain or through puddles.  Skating through water will also destroy your bearings, if deck warping and breaking wasn’t a good enough reason for you to not do it.

With Enkeeo 22 Inch Cruiser Skateboards, you can cruise in style.  It has a dimension of 22 x 6 inches.  It comes with 3″ Black Coated Habitat trucks, Black 60mm Smooth wheels, and Abec11 bearings. It’s ready to ride and you can even personalize the tail of the board for free with a limitation of 10 Characters only. It has 30 days warranty and is manufactured in California.  It has a perfect 5 rating on Amazon.
These guys are unabashedly all about London and the party boy lifestyle. The self-aware attitude they carry themselves with shines in the corresponding product copy on their website—it’s contagious and makes you want a piece of it.  Everyone from A$AP Rocky to Drake, and even seemingly out-of-touch Jay Z has been seen rocking the gear, and it’s understandable why. Palace’s design team, which includes Fergus Purcell of Marc Jacobs, have created an image that’s been exclusive and dope from its inception, and they’ve yet to break that streak. Who else could follow up a dope adidas collaboration with an excellent pair of penny loafers?

It is mainly because those items are guaranteed to help you familiarize yourself with the ins and outs of using them. They are a big help in making you feel comfortable when you push off with your feet while also balancing on top of the board when riding. It is not good to go for a very technical product, so it’s best to choose the mentioned types first.


The best criticism you could make about skateboarding in general right now is that it takes itself too seriously. Rightfully so. Skateboarders are often under attack, and what they do is illegal in most places. Skate culture is constantly being ripped off and bastardized. That's why it's so important to have a healthy sense of humor about it all, and that's why it's important that skateboarding has Roger.
Skateboarders from all over know Santa Cruz Skateboards for its “Screaming Hand” logo, designed by legendary artist Jim Phillips, and the monstrous artwork displayed on the decks, including series styles such as their Star Wars and Marvel series. Founded in 1973 and distributed by NHS, Inc., the California based brand is the oldest continuous skateboard company in the world. Santa Cruz boards are made from 100% North American maple and they offer complete skateboards, decks, and cruiser boards. The Santa Cruz Skateboards team consists of 16 professional skateboarders including names such as Blake Johnson, Dylan Williams, Emmanuel Guzman, and Eric Dressen.

A skateboard is fundamentally a sum of its parts. If you want a good skateboard, you’ll want each component to be high quality. We’ll take a look at each part of a skateboard and talk about what quality means for the that component. We’ll try to give tips on how to spot a high or low quality implementation of that component and then we’ll share how SkateXS Skateboards measure up.  
Bearings are standardized to fit in all kinds of skateboard wheels. All bearings will eventually get dirt and gunk in them which slows you down. Regular cleaning is recommended. Higher quality bearings will perform better, roll faster, retain more speed, and last longer when cleaned regularly. Some bearings come with bearing spacers or have spacers built into the bearing. These will fit in any wheel, but are not necessary for most types of skateboarding or longboarding.
In terms of their skateboard output, Palace have released numerous videos online since their inception, including Gangbanging at Ground Zero (2011), Niggaz with Altitude (2013), a Danny Brady welcome clip ‘Definitely Brady‘ in 2014 and most recently, Very Nice in 2016 featuring newer team riders Shawn Powers and early viral internet star Jamal Smith. Palace are currently working on a full-length video.

Top Ten Worst Companies In the U.S.Best Skateboarding BrandsBest BMX Bike BrandsmcarzwashereBest Scooter BrandsBest Brands of Mountain BikesBest Lego ThemesTop 10 Best Assault RiflesRotorheadTop 10 Best Nerf GunsTop 10 Things to Buy with $100Best Knife CompaniesTop Ten Best Cigarette BrandspreachinpreachTop 10 Most Needed Survival SuppliesTop Ten Electronics BrandsMatrixGuyTop 10 Best Airlinescarvandog
The magical thing about Supreme is that—despite what some may think—it actually caters to everyone. While they may not go out of their way to make you feel welcome, at its core, the brand is a legendary downtown skate institution, and there is no singular sensibility you can pin on Supreme. It's hip-hop and punk, menswear and streetwear. The unifying aspect is deep roots in skate, music, and art. Beyond that, anything goes.
Velocity Boards Retro Skateboards is a complete 22″ Banana Skateboard.  It includes 6″ Lightweight Aluminum Trucks, High-Speed ABEC-7 Bearings, High-Quality Wheels & Bushings and Hardware.  It has a Unique Textured Waffle Pattern on Deck and is designed for Maximum Grip.  The Deck measures about 22 x 6 x 4″.  It has a 6″ Truck Axle and a 3″ Truck Hanger.  It has a maximum weight capacity of  176 lbs. (80 kgs.).  It is great for all skaters who are 6 years old and above.  It has an Amazon rating of 4.7.
The Moose Blank Skateboard deck is a made with a 7-ply composition and features Canadian Maple wood. The board is 8.25 inches in length, but Moose Blank offers shorter boards as well, fitting men and women of just about any size and skill. The deck itself has a modern concave, making turning a breeze for beginners and pros. The nose and tail are particularly steep for tricks and “perfect for shredding,” says Blank Moose. Although this board is 100-percent blank, Moose Blank offers stains and dips for monochromic board designs as well. There are also Moose Blank sets for sale, which provide a set of blank decks at a discount.

Distributed by NHS, Inc., Creature Skateboards was launched in 1994 by professional skateboarders Russ Pope, Jason Adams, Barket Barrett and Darren Navarrette. The company was revived in the mid-2000s. Creature is known for its horror themes on its skateboards and clothing. The company offers complete skateboards that include the decks, wheels, trucks, and bearings as well as customizable decks, and accessories. The Creature team includes 19 professional skateboarders. In addition to Navarrette, the roster includes such names as Al Partanen, Chris Russell, Cory Juneau and David Gravette.
The skateboarding industry has changed so much in the last few years. Female skaters now get the support they need from bigger companies. I know hoopla helped pave the way for this to happen. It was so rewarding and surreal to have had such a rad team of girls represent hoopla over the years. I am stoked to have formed friendships with such a diverse and talented group.
Jessup is considered to be the standard grip tape, and it is the grip we offer for free with all decks. MOB is known for their coarser grip, which gives excellent traction, but also wears down your shoes faster. MOB M-80, Grizzly and Shake Junt grip tapes fall somewhere in the middle, offering good overall traction without the heavy abrasion. There are other extra course grip options for downhill skateboarding (Vicious, Blood Orange, etc.). That stuff locks your foot in place but it is so coarse it would quickly destroy your shoes if you tried flip tricks with it.
Make no mistake, not all European skate brands are provincial microcosms. Cliché has one of the most stacked teams in the industry, including the Australian master of pop Andrew Brophy and manual wizard Joey Brezinski. But the real star of the squad is Frenchman Lucas Puig, who has a stellar signature shoe for adidas, and an upcoming line of caps called Hélas that you will undoubtedly be hearing more about in the near future. Team aside, thanks to strong art direction, a prolific video program, and a highly covetable product offering that includes a dope collab with NYC mainstay DQM, Cliché is très ill.
The skateboard companies that are considered at the top include Element Skateboards. Founded by professional skateboarder Johnny Schillereff in 1992, the company’s goal was to expand on Johnny’s “Elementality” vision to build a company that helped to bring awareness to skateboarding. The goal is to focus on its uses in nature and the environment and the interconnecting of art and skateboarding. Developed from an urban mentality that was rough around the edges, the brand was transformed to embrace the “tree” logo with an emphasis on the positive and making the world a better place. A customer can purchase complete skateboards that include the decks, wheels, trucks, and bearings or they can customize a deck to suit their needs. Accessories and clothing are also offered. There are 20 professional skateboarders on the Elements team including such names as Brandon Westgate, Nyjah Houston, Mark Appleyard and Nick Garcia.
Trick wise, you can perform many different tricks. The price is well worth it because of the lightweight nature and solid design of the skateboard brand. The trucks and bearings are custom made by the company so there is no room for error as the quality is promised to be upheld by the company. Also, the package itself comes with a mini T-tool which is great for on the spot replacement of wheels, adjusting the bearings, and also interchanging the trucks if need be.
Following stints on the US brands Mad Circle and Arcade and a pro model on the then hugely popular European brand Cliche skateboards, Pontus Alv quit his board sponsor and moved back to his hometown of Malmo, Sweden in the early to mid 00’s. During this time Pontus took what might be called a creative hiatus but which would be more accurately explained as a re-connection with his roots. After returning to Malmo, Alv became heavily involved in building and creating the scene there, working alongside friends to build a number of DIY skatespots through the city such as the now legendary Savanna-side and Steppeside projects.
×