In the early 1970s, Frank Nasworthy started to develop a skateboard wheel made of polyurethane, calling his company Cadillac Wheels.[7] Prior to this new material, skateboards wheels were metal or "clay" wheels. The improvement in traction and performance was so immense that from the wheel's release in 1972 the popularity of skateboarding started to rise rapidly again, causing companies to invest more in product development. Nasworthy commissioned artist Jim Evans to do a series of paintings promoting Cadillac Wheels, they were featured as ads and posters in the resurrected Skateboarder magazine, and proved immensely popular in promoting the new style of skateboarding.
Grind King skateboard trucks are the best trucks available for grinding. The truck hangar is made from aluminum, making it softer and weaker, but better for grinding. This means you will have to replace them faster if you grind, but your grinds will be smoother and better. Grind King trucks do use special hex-head kingpins, so you will need a special tool to adjust them.
The skateboard industry is as colorful and competitive as the sport itself.  It’s no surprise that the top skateboard brands all take on that daring, free expression and edgy creativity that is quintessential to the skateboarding community.  But it’s not all fun and games — it takes a lot more than producing wooden decks with dope graphics to make it to the top.  It takes hands-on dedication and genuine passion for the sport.
“The skateboard industry’s current focus on performance by displaying almost exclusively difficult tricks, whether technical or dangerous, is not something we relate to on our daily experience on our boards. We feel that skateboarding has much more to offer than being only a sport. It has cultural, social, artistic, sociological values and much more and it seems all these aspects are being widely overlooked by the industry. Magenta is our outlet for representing the wide spectrum of possibilities that skateboarding carries within itself.”

Powell Skateboards is one of the original skateboard companies who dates back to 1978 and who has consistently been a top skateboard brand. If you or someone you know skated in the 1980’s, chances are it was on a Powell skateboard. Though Powell had a short lived split between cofounders, George Powell and Stacy Peralta, they regrouped to produce “top of the line” skateboards under the Powell Classic name and succeeded in becoming one of the most successful skateboard companies. Something stuck through that split and they made the list for clear understanding of the fundamentals of a quality skateboard and easily became a perfect quality skateboard brand..

Read on for our complete skateboard buyers guide where you can find things to consider when buying a beginner board, beginner skateboards for adults, ABEC ratings, Sizing Chart, and more about these epic extreme sports. Looking to go electric? Check our our review of the top electric skateboards! You could also try these top-rated electric longboards.

In this in-depth guide, we’re going to cover how to choose the best skateboard for beginners, and review the top five beginner skateboards on the market right now. We’ll talk about how to choose the right size, what parts of a skateboard you should pay attention to, how to choose the right shape, choosing the right wheels, and more. First, let’s talk about the top five skateboards for beginners.
Made with bamboo and fiberglass, this board is tough, flexible, and ready for anything. The construction is designed to feel and act like a snowboard. The drop-through design is perfect for freestyle longboarding, commuting, carving, pumping, and more. It gives you better stability and more wheel clearance. The board is definitely best designed for carving but tricks and kicks are easily done as well.
The first skateboards started with wooden boxes, or boards, with roller skate wheels attached to the bottom. Crate scooters preceded skateboards, having a wooden crate attached to the nose (front of the board), which formed rudimentary handlebars.[6][7][8] The boxes turned into planks, similar to the skateboard decks of today.[9] An American WAC, Betty Magnuson, reported seeing French children in the Montmartre section of Paris riding on boards with roller skate wheels attached to them in late 1944.[10]
Krown Rookie complete skateboards are a prime example of a product that is well liked, and of great quality. Just like with the previous Krown product we discussed, the company has given us several colors of the product o choose from. This is a great addition, since it helps riders personalize their rides whichever way they want. It also limits the possibility of running into someone that is sporting the same skateboard at you!
Here's some general guidelines to get you started: Narrower decks are lighter and easier to flip, but you’ll sacrifice some stability. Wider boards are more stable but are heavier and slightly less ideal for some tricks. Skaters who like flip tricks, manuals, ledges, and flat bars usually prefer boards on the narrower side of the spectrum (7.75 – 8.25 inches). Those who skate big bowls, hand rails, or like to jump down large gaps at high speeds are usually more comfortable with a larger board (8.25 – 9.0 inches).
If you want to be able to practice your new hobby anywhere and everywhere, the Fade is an excellent choice. This is a short skateboard that measures only 27 inches long, made of lightweight (yet still durable) plastic. That means it’s easy to toss into a backpack and carry with you on your commute, to school, or anywhere. It’ll also fit into a locker at the gym or school quite easily.
Skateboarding, in one form or another, has been around since the late 1950’s when the first brave pioneer first attached roller skate wheels to a piece of wood. As skateboarding progressed to mimic surfing, skateboards evolved with the style of riding. Skateboards grew and changed shapes as riders experimented with everything from plastic to fiberglass to aluminum constructions - all in an effort to push what was possible. Like most sports or art forms, progression is at the heart of skateboard innovation.

Bearings are standardized to fit in all kinds of skateboard wheels. All bearings will eventually get dirt and gunk in them which slows you down. Regular cleaning is recommended. Higher quality bearings will perform better, roll faster, retain more speed, and last longer when cleaned regularly. Some bearings come with bearing spacers or have spacers built into the bearing. These will fit in any wheel, but are not necessary for most types of skateboarding or longboarding.
Cheap Hoverboard Drones Drones with Camera Electric Scooter Electric Skateboard Freeboard Gifts for Skateboarders GoPro Alternative Cameras Headphones Hoverboard Laws How to Ride a Snakeboard Longboard Longboards Mini Segway Mopeds Mopeds for Sale Quadcopters Quadcopters with Camera Ripstick Rollerblades Roller Skates Self Balancing Board Self Balancing Scooter Self Balancing Unicycle Skate 3 Skateboard Skateboard Backpacks skateboard d Skateboard Decks Skateboard Girls Skateboarding Tricks Skateboard Quotes Skateboard Rack Skateboards Skateboard Trucks Skatecycles Skate Game Skate Logos Skate Shoes Ski Jackets Smart Electric Scooter Snakeboard Unicycle Scooter Vans Waveboards
These films have helped improve the reputation of skateboarding youth, depicting individuals of this subculture as having a positive outlook on life, prone to poking harmless fun at each other, and engaging in healthy sportsman's competition. According to the film, lack of respect, egotism and hostility towards fellow skateboarders is generally frowned upon, albeit each of the characters (and as such, proxies of the "stereotypical" skateboarder) have a firm disrespect for authority and for rules in general. Gleaming the Cube, a 1989 movie starring Christian Slater as a skateboarding teen investigating the death of his adopted Vietnamese brother, was somewhat of an iconic landmark to the skateboarding genre of the era.[citation needed] Many well-known skaters had cameos in the film, including Tony Hawk and Rodney Mullen, where Mullen served as Slater's stunt double.

While the skate shoes design afforded better connection and traction with the deck, skaterboarders themselves could often be identified when wearing the shoes, with Tony Hawk once saying, "If you were wearing Vans shoes in 86, you were a skateboarder"[27] Because of its connection with skateboarding, Vans financed the legendary skateboarding documentary Dogtown and Z-Boys and was the first sneaker company to endorse a professional skateboarder Stacy Peralta. Vans has a long history of being a major sponsor of many of skateboarding's competitions and events throughout skateboarding's history as well, including the Vans Warped Tour and the Vans Triple Crown Series.[8][81][82][83][84][85]


Blank decks have no graphic on them and are typically priced very reasonably.  Blank decks are usually colored a solid color or may even be made of unpainted wood.  Historically blank decks have gotten a bad reputation for poor quality, however, there are a few brands of blanks today that are very similar in quality to pro boards and much more affordable.  The downside to buying a blank complete with all blank parts is the lack of style and customization when compared to a pro deck.  Also, blank skateboards may vary in quality from batch to batch, so it may be hard to find the same blank skateboard if you want to buy another one.  Overall, blank skateboards can be a solid option if you have a tight budget and the person you are buying for doesn’t really care about the logo and brand.
Freedom Plaza has become a popular location for skateboarding, although the activity is illegal and has resulted in police actions.[5][115] A 2016 National Park Service management plan for the Historic Site states that skateboarding has damaged stonework, sculptures, walls, benches, steps, and other surfaces in some areas of the Plaza.[5] The management plan further states that skateboarding presents a persistent law enforcement and management challenge, as popular websites advertise the Plaza's attractiveness for the activity.[5] The plan notes that vandals have removed "No Skateboarding" signs and recommends the replacement of those signs.[5]
In 1975 skateboarding had risen back in popularity enough to have one of the largest skateboarding competitions since the 1960s, the Del Mar National Championships, which is said to have had up to 500 competitors. The competition lasted two days and was sponsored by Bahne Skateboards & Cadillac Wheels. While the main event was won by freestyle spinning skate legend Russ Howell,[30][31] a local skate team from Santa Monica, California, the Zephyr team, ushered in a new era of surfer style skateboarding during the competition that would have a lasting impact on skateboarding's history. With a team of 12, including skating legends such as Jay Adams, Tony Alva, Peggy Oki & Stacy Peralta, they brought a new progressive style of skateboarding to the event, based on the style of Hawaiian surfers Larry Bertlemann, Buttons Kaluhiokalani and Mark Liddell.[32] Craig Stecyk, a photo journalist for Skateboarder Magazine, wrote about and photographed the team, along with Glen E. Friedman, and shortly afterwards ran a series on the team called the Dogtown articles, which eventually immortalized the Zephyr skateboard team. The team became known as the Z-Boys and would go on to become one of the most influential teams in skateboarding's history.[27][33][34]

There were several artistic skateboarding pioneers that had an influence on the culture of skateboarding during the 1980s, that transformed skateboard-deck art like Jim Phillips, whose edgy comic-book style "Screaming Hand", not only became the main logo for Santa Cruz Skateboards, but eventually transcended into tattoos of the same image for thousands of people and vinyl collectible figurines over the years.[93][94][95] Artist Vernon Courtlandt Johnson is said to have used his artwork of skeletons and skulls, for Powell Peralta, during the same time that the music genres of punk rock and new wave music were beginning to mesh with the culture of skateboarding.[8][96][97] Some other notable skateboard artists that made contribrutions to the culture of skateboarding also include Andy Jenkins, Todd Bratrud, Neil Blender, Marc McKee, Tod Swank, Mark Gonzales, Lance Mountain, Natas Kaupas and Jim Evans.[98][99]
I'm not talking about mall chain stores, like Zumiez; I mean a locally owned and operated skateboard shop. Look around at what they sell, and talk to the staff about the different brands. Of course, they may be biased toward the brands they carry, but chances are you'll learn something that will help you make a decision. There are some big-name board brands that you'll find in most shops, but there should also be some smaller brands you may not have heard or seen around town. There might even be a a local skater or manufacturer that you could support. 
Hardware won’t have an effect on your skating. Standard 7/8 - 1 inch hardware will work for most skateboards. However, if you use riser pads, be sure that you have long enough hardware to go all the way through the deck, trucks and riser pad. If you're unsure what length of hardware you need, give one of our experts a call at 888.450.5060 and we'll be stoked to help you out.
Thanks for reading the fine print. About the Wiki: We don't accept sponsorships, free goods, samples, promotional products, or other benefits from any of the product brands featured on this page, except in cases where those brands are manufactured by the retailer to which we are linking. For our full ranking methodology, please read about us, linked below. The Wiki is a participant in associate programs from Amazon, Walmart, Ebay, Target, and others, and may earn advertising fees when you use our links to these websites. These fees will not increase your purchase price, which will be the same as any direct visitor to the merchant’s website. If you believe that your product should be included in this review, you may contact us, but we cannot guarantee a response, even if you send us flowers.
Graphically speaking, Welcome is very distinctive, with an emphasis on hand drawn imagery and references to esoteric and occult themes mixed with bright colourways. Welcome Skateboards also offer a detailed shape guide on their website, detailing the exact dimensions of all of their 38 custom shapes, which again differentiates their product from many of the skateboard brands on the market.
A skateboard is a special type of sports equipment crafted from a long piece of maple wood with a polyurethane coating for increased durability and easy sliding while in motion. The wood is attached to four wheels and propelled forward by either the push of a rider's foot or by the gravitational forces acting upon them in a given circumstance, which means that a rider can simply stand on the board's surface and ride it downhill without using their feet at all. Skateboards are available as either long boards or short boards. Long boards are usually between thirty-five and sixty inches long and are ideal for cruising purposes and downhill racing. They are typically more expensive than short boards, which are around thirty inches long and are designed for getting air and performing stunts or tricks.
Similar to sandpaper, grip tape, or “grip” as it’s commonly referred to, is applied to the top of your deck for traction. Grip gives you the friction you need to perform tricks such as ollies and kickflips. Not all grip tape is the same however. Each brand's products perform differently, so you may want to experiment with different brands to get a feel for what you prefer.

The deck will also have a material on top called grip tape. This textured surface is what keeps your shoes from sliding all over the place as you ride. Look for a very high-quality grip tape for extra stability as you are learning, or something that is very visibly textured (like the waffletop from the pennyboard on our list above). You can also replace the grip tape if you love a board but don’t love the grip tape it comes with.
Serving skateboarding since 1976, we now offer the finest complete range of skate products in the world, handcrafted to serve skaters from their first skateboard to the top professional level. Our mission is to make the best skate equipment you can buy. If you don’t already know what you want, let us help you select the skateboard components that will enable you to take your skating to the next level. Whether you’re a first-time customer or a loyal fan, we’re proud to serve you.
Supreme may be something of an outlier in the skate industry where few brands have brick and mortar presence, and limited distribution is aproblem, not a strategy. Unlikely or not, Supreme kills it as a skate brand and as a brand in general. No other skate brand can claim the level of accomplishment that Supreme has achieved—nine retail stores around the world, collaborations with the biggest names in fashion and art, and a confounding secondary market of resellers and collectors. Supreme reigns supreme.
Despite what many young skaters may think, there is more to choosing a skateboard deck than the graphic on the bottom of the pro skater the deck company sponsors.  The best skateboard deck varies from person to person depending on external factors such as the rider’s weight, skate style, shoe size, and budget.  Person preferences can also impact the decision.  For example, you may want to support your favorite pro skateboarder, so you buy their pro deck.
^ Jump up to: a b Costello, Becca (November 10, 2005). "Skateboarding is not a sport: Skateboarding the Sacramento streets takes skill, balance and nerve. Just don't call it a sport". Sacramento News & Review. Retrieved December 10, 2012. Despite stickers, posters and T-shirts stating the contrary, it turns out that skateboarding is, in fact, a crime. “In the downtown district, you can skateboard as transportation,” Rafter explained. “Anything other than all four wheels on the ground and getting to where you’re going, they have a problem with.”

You guys must have noticed that we have an absolute adoration for boards that not only ride smooth but are also easy on the eyes. Plan B covers the graphics of skateboards quite well, with its own unique style and color schemes. Some of the examples of their visual masterpieces are, the Riot Cole (with the Plan B logo embedded in different art schemes) and the Anatomy Cole 8 (with individualistic graphics).
Based out of Huntington Beach, California, Good Skateboards is a grassroots inspired skate brand specializing in quality boards. Skateboarding isn’t about what you do, but how you do it. That’s Good Skateboard’s mission and they’re sticking to it! The brand is committed to supplying the skating industry with positive vibes and exceptional products that make you appreciate skateboarding all over again. Good Skateboards decks are constructed from 100% Canadian maple and made in the USA. Their decks are classic in board style and feature fun artwork from artist Vincenzo Colonna. In addition to decks, they also offer branded tees and accessories featuring their iconic “Ok” hand gesture logo. Good Skateboards t-shirts have similar graphics to what you see on their decks. You’ll see the same artwork on their stickers too!

After leaving long time sponsor Birdhouse due to a feeling of dissatisfaction at the manner in which he himself was being marketed as a pro skater, Andrew Reynolds joined forces with a group of similarly aged pro skaters, who at the time, all lived close to each other in Huntington Beach, California in the Warner Ave housing complex and resolved to turn what had formerly been a loosely affiliated crew into a skateboard brand. Reynolds approached Tony Hawk and Per Welinder, owners of Blitz Distribution (and distributors of Birdhouse) with his idea and, rather than losing Reynolds completely, Blitz Distribution agreed to assist Reynolds with Baker and to distribute it.
×