When looking at skateboarding’s history, the only thing that’s stayed the same is the overall structure: every board consists of four skateboard wheels, two skateboard trucks, and a riding surface of some kind. And while we’ve come a long way from the days of metal and clay wheels, some aspects of skateboarding - like the brands manufacturing some of the most trusted products - haven’t changed at all. Independent Trucks has been designing trucks since 1978. Powell Peralta, the company responsible for Powell Skateboards, Bones Wheels, Bones Bearings, and the Bones Brigade also started in 1978. NHS, Inc., the company that produces Santa Cruz Skateboards, Independent Trucks, Bronson Speed Bearings, Krux trucks, Flip Skateboards, Ricta Wheels, Mob Grip, and OJ Wheels started in 1973. It’s no wonder these brands are still doing so well - they’ve been with skateboarding since the beginning. Since the day skateboarding went from something surfers did when the waves were flat to its own sport that involves technique, practice, and careful consideration, a small handful companies have been there to help skateboarding become what it is today.
Manufacturers started to experiment with more exotic composites and metals, like fiberglass and aluminium, but the common skateboards were made of maple plywood. The skateboarders took advantage of the improved handling of their skateboards and started inventing new tricks. Skateboarders, most notably Ty Page, Bruce Logan, Bobby Piercy, Kevin Reed, and the Z-Boys started to skate the vertical walls of swimming pools that were left empty in the 1976 California drought. This started the "vert" trend in skateboarding. With increased control, vert skaters could skate faster and perform more dangerous tricks, such as slash grinds and frontside/backside airs. This caused liability concerns and increased insurance costs to skatepark owners, and the development (first by Norcon, then more successfully by Rector) of improved knee pads that had a hard sliding cap and strong strapping proved to be too-little-too-late. During this era, the "freestyle" movement in skateboarding began to splinter off and develop into a much more specialized discipline, characterized by the development of a wide assortment of flat-ground tricks.
The concave of a skateboard deck is how curved the width of the deck is. Very few skateboard decks have no concavity and are completely flat as then they would break very easily and be hard to do flip tricks on. Steep concave decks are the most study and best to do flip tricks on because the slope of the deck catches the skater’s toe or heel more easily and flips the board faster than a shallower deck. Shallow concave boards are better for cruising around and vert skating as they are more comfortable on your feet and more controllable. In practice, these recommendations are pretty general and it ultimately comes down to personal preference on the the best deck concavity. But if you have no idea, following the recommendations or picking a board with moderate concavity is a good place to start.
Powell Peralta has gained increasing popularity in the 1980s, when skateboarding became an increasingly more sought-after action sports. Since then, they have been developing skateboards tailored to customers, taking reviews and critiques into consideration every time they were building a new model. The Powell Golden Dragon is a direct result of such careful consideration and tailored-modeling.
Started by a group of guys who decided to stick together after the fall of Alien Workshop, Quasi skateboards presses boards and prints shirts featuring psychedelic art for the year 2015, offering something different than most board brands today. Backed by a team boasting hometown heroes and certified style gawds, Quasi is a board company everybody wanted that nobody had made yet.
Moving on to our favorite pick from the Plan B series, Plan B Skateboard Complete Felipe Victory 7.6″ Tensor Assembled, suitable for all kinds of riders, but is an ideal skateboard for intermediate skateboard riders. The deck is made from 100% North American maple and measures 7,6 inches. Its wheels are 52mm TGM wheels which means it is excellent for both street and park skating. We also love its lightweight trucks and heavy-duty aluminium with grade 8 steel kingpins and axles plus the bushings (USA made) and pivot cups. The bearings are rated 5 on the ABEC scale.
Be sure to purchase from a reputable source. Buying online might save you a few dollars, but try your local skate shop first. The few extra dollars you spend support the shop and your local skate community. Developing a good relationship with a local skate shop often saves you money in the long run. The completes are not as good as custom made, but you can get them for a lot less money and upgrade any bad components later.
Skateboarding is one of the most popular alternative sports around the world, for kids and adults alike. But before you hop on a board and take off, it’s important to choose the right kind of board for you. Most beginners will simply grab the board that they like the looks of, and with the endless array of deck art and styles that exist, that kind of attitude can lead to choosing a board that isn’t right to learn on.
Skateboards just aren’t what they used to be, and that doesn’t make Jim Greco, Baker and Deathwish OG, happy whatsoever. Greco started the company last year as an effort to bring back skateboard manufacturing to the USA from overseas in China, using the traditional silk screen ink transfer and hand shaping methods from the early days of skateboarding.
“The skateboard industry’s current focus on performance by displaying almost exclusively difficult tricks, whether technical or dangerous, is not something we relate to on our daily experience on our boards. We feel that skateboarding has much more to offer than being only a sport. It has cultural, social, artistic, sociological values and much more and it seems all these aspects are being widely overlooked by the industry. Magenta is our outlet for representing the wide spectrum of possibilities that skateboarding carries within itself.”
Ever notice small vertical or horizontal cracks through your grip tape or by the hardware of your trucks? These are called stress or pressure cracks and are basically mini fractures of your skateboard deck that typically are seen in the areas of the deck that withstand the greatest impact (around the trucks). A few pressure cracks is generally no big deal and you won’t even notice them while skating, but they can compound and grow larger and make your deck lose “pop” and increase the chance of snapping. To avoid pressure cracks, you cant use riser pads underneath your trucks to reduce the level of impact your deck takes. You should also avoid over tightening your hardware and storing your skateboard in a very humid place as both of these practices can also make your board weaker and more susceptible to pressure cracks.
“As far as the actual look of the vast majority of contemporary graphics goes, I’d say that it feels to me as if something has been lost. It’s down to what you can do with modern heat transfer printing techniques – you can literally just take a photograph from the Internet and print it identically straight onto a skateboard. Speaking personally, there’s very little to challenge you there: either from the point of view of creating graphics, or from the consumer’s perspective. Whereas back when screen-printing was the norm, every time a graphic was produced the artist was physically cutting the key line out by hand. The key line is the final black line that forms the outline of whatever it is that you’re printing and ties in all the other colours together. You can see this in the early Sean Cliver graphics for example, where it’s clear that he has hand cut the key lines as precisely as he was able to, but looked at from today’s perspective they’re not perfectly precise, which is what gives Cliver’s earliest stuff its specific look in my opinion.”
A precursor to the extreme sport of street luge, that was sanctioned by the United States Skateboarding Association (USSA), also took place during the 1970s in Signal Hill, California. The competition was called "The Signal Hill Skateboarding Speed Run", with several competitors earning entries into the Guinness Book of World Records, at the time clocking speeds of over 50 mph on a skateboard. Due to technology and safety concerns at the time, when many competitors crashed during their runs, the sport did not gain popularity or support during this time.
If you didn’t already know, the “nose” of a skateboard is typically the front and the “tail” is the back. When you fall or slip and your board slams into curbs, fences, or other hard objects, it’s common for the wooden ends to chip or become damaged upon impact. Over time these chips can make it harder to preform tricks and even just cruise around. These chips can be prevented by buying a carbon fiber or non-wood deck, or by there are some metal edges available that can be installed on the nose and tail.
It is a mini-cruiser, which is known for its strength as well as its ability to offer real value for the money you spent. This skateboard can also be expected to deliver an impressive performance – thanks to the Abec 7 skatro bearings used in it. There are also 59-mm urethane wheels and the 3-inch GOLD aluminum trucks that can help smoothen each ride.
Now venturing into making boards through a sister company Jamaica after running a line of them under their own Bronze name, Bronze has not slept after catching their first break of success. They recently collabed with Palace on a collection that instantly sold out, and have already dropped the successful first half of their collaboration with HUF. Keep an eye out for the second installment of that coming soon.
Krown’s motto is to provide quality skateboards on a budget. They manage that surprisingly well; not only are their products at budget prices, but they can take quite a lot of beating too. Their skateboards arrive readily assembled and ready to ride. You won’t have to spend hours fiddling with screws and bolts to ride your new prized possession! No matter if you are a beginner or an expert looking for a good board to ride on, Krown’s product is made to fit everyone’s needs.
The grip tape found on a skateboard can actually be defined as the grainy sheet, which resembles sandpaper that also comes with a sticky underside. Such underside needs to adhere to the deck’s surfaces as a means of increasing traction or grip. No matter what skating style you use, the grip tape is extremely helpful in your attempt to stay on the board.
The promo was followed in late 2012 by another Polar Skate Co. Promo – No complies & wallrides & shuvits again filmed in and around Malmo, Sweden as well as Copenhagen, Denmark, New York and London, featuring skaters who appeared in the original promo, plus new addition and former Uk-born Blueprint skater Jerome Campbell and New York based Aaron Herrington who would go on to turn pro for Polar.
Skateboard decks width is probably one of the most important factors to consider when buying a deck. Decks typically range from 7.25-8.5″. 7.5″,7.75″, and 8.0″ tend to be the standard widths if most decks and the general rule is that the bigger your feet are the wider the deck you should get. Thinner decks are slightly easier to flip, however they are harder to land on due to the decreased surface area. This is a tradeoff you have to consider, but the typical rule of thumb for younger guys is that you get wider decks the more advanced and larger you get. Street skaters typically also like smaller decks as they are easier to navigate and carry around in crowded cities and areas.
So now that you have an idea of what size and shape board you like, it’s time to choose a brand. A popular size is an 8.5 skateboard deck. If you were looking for a size 8.5 skateboard deck, you could narrow the decks offered on CCS.com to fit in the 8.25 - 8.5 range. This will show you all the boards in that range, and significantly reduce the boards you have to look through. Now, if you don’t have a preference on board brands, find a graphic you like and you’re all set. If this is your first skateboard or are still learning about what wood and brands you prefer, we recommend checking out a CCS Skateboard. They give you a bang for your buck, that's for sure.
In the early 1970s skateparks hadn't been invented yet, so skateboarders would flock and skateboard in such urban places as The Escondido reservoir in San Diego, California. Skateboarding magazine would publish the location and Skateboarders made up nicknames for each location such as the Tea Bowl, the Fruit Bowl, Bellagio, the Rabbit Hole, Bird Bath, the Egg Bowl, Upland Pool and the Sewer Slide. Some of the development concepts in the terrain of skateparks were actually taken from the Escondido reservoir. Many companies started to manufacture trucks (axles) specially designed for skateboarding, reached in 1976 by Tracker Trucks. As the equipment became more maneuverable, the decks started to get wider, reaching widths of 10 inches (250 mm) and over, thus giving the skateboarder even more control. A banana board is a skinny, flexible skateboard made of polypropylene with ribs on the underside for structural support. These were very popular during the mid-1970s and were available in a myriad of colors, bright yellow probably being the most memorable, hence the name.
Choosing a skateboard deck is a great place to start when building a complete skateboard. Unless you have experience riding a shaped board - something a little more retro or unusual, we recommend you start with a popsicle shape. CCS carries over 60 different skateboard deck brands that sell this popular popsicle shape. If you have questions on what size you should ride or have any other questions about building a complete, we recommend you check out our Skateboard Buyer’s Guide. Here, you’ll find helpful how-to’s for choosing a skateboard decks, skateboard trucks, skateboard wheels, skateboard bearings, and skateboard components. This guide explains every part of a skateboard and helps you choose which sizes and styles to best suit your needs.
Top Ten Worst Companies In the U.S.Best Skateboarding BrandsBest BMX Bike BrandsmcarzwashereBest Scooter BrandsBest Brands of Mountain BikesBest Lego ThemesTop 10 Best Assault RiflesRotorheadTop 10 Best Nerf GunsTop 10 Things to Buy with $100Best Knife CompaniesTop Ten Best Cigarette BrandspreachinpreachTop 10 Most Needed Survival SuppliesTop Ten Electronics BrandsMatrixGuyTop 10 Best Airlinescarvandog
The magical thing about Supreme is that—despite what some may think—it actually caters to everyone. While they may not go out of their way to make you feel welcome, at its core, the brand is a legendary downtown skate institution, and there is no singular sensibility you can pin on Supreme. It's hip-hop and punk, menswear and streetwear. The unifying aspect is deep roots in skate, music, and art. Beyond that, anything goes.
Baker is a classic good old fashioned, anti-establishment skateboard brand. Baker has a great professional team including founder Andrew Reynolds. Reynolds is also heavily involved in other well-known skateboard brands like Deathwish, Emerica, and Shake Junt. Notable street artist Neckface has a limited edition line of Baker decks that is one of the coolest in skateboarding in my opinion.
In this in-depth guide, we’re going to cover how to choose the best skateboard for beginners, and review the top five beginner skateboards on the market right now. We’ll talk about how to choose the right size, what parts of a skateboard you should pay attention to, how to choose the right shape, choosing the right wheels, and more. First, let’s talk about the top five skateboards for beginners.
Obviously, price is an important consideration for most people when looking to buy anything. For skateboards, the price of the board is generally a good indicator of quality. In general, most pro branded skateboards that are made up of high-quality parts are in the $70-$100 range. You can usually find pro branded decks with average parts for $50-$70, and you can find blank options between $25-$50. I wouldn’t touch anything under $25, as it is likely poor quality and very prone to breakage.
Presenting to you, the next in line for top skateboard brands; Powell Peralta. Established back in 1978, Powell Peralta is perhaps one of the most well-known names in the skateboarding world. It was launched at a time when skateboarding was gaining traction and Powell Peralta rose to prominence. Powell Peralta is also known for featuring the Bones Brigade, which was a team featuring the top players of that time. Peralta left the company in between but both the partners reunited to create magic in the skateboarding community.
Founded by the original technical street skaters Daewon Song and Rodney Mullen, Almost Skateboards always pushes the envelope with fun, artistic cartoon graphics paired with high quality materials. Almost was one of the first brands to implement carbon fiber layers to their decks in the “Impact” deck line to increase the deck’s life and better maintain its shape.
Amongst the chaos of trends and contrived images GOOD Skateboards remains true to the roots. The preach and practice of the philosophy that it's not WHAT you do but HOW you do it. Spear headed by legendary pro Tosh Townend, GOOD Skateboards is that much needed breath of fresh air in an industry polluted by heartless money fiends and exploitative mind sets. Made in the USA and as Grass Roots as you could possibly get Tosh and good friend Tommy De Maria bring to you something straight from the core of skateboarding; actual skateboarding. No egos, no attitudes; GOOD Skateboards' roots run deep with an utmost respect for skateboarding's past and a rich understanding of skateboarding's history. Support GOOD and support skateboarding in the hands of skateboarders.
Element Skateboards are also one of the most popular and best skateboards in the world of boarding. If you choose to purchase it, you will get high-quality skateboards that will stand the test of time. The best thing about them is environmental friendliness that they promote along the way. Therefore, you will enjoy in Driftwood deck, which are much more affordable and lighter.
Launched in 1991 by professional skateboarder Mike Ternasky who was killed in a car accident in 1994, Plan B Skateboards was renewed in 2005 by professional skateboarders Danny Way and Colin McKay. The top Skateboards brand, recognized by its unique logo, offers customization, but it also produces skateboards that come already assembled and ready for immediate action with everything a skateboarder needs including the deck, wheels, trucks, and bearings. The decks are made with a durable and thick seven-ply maple. They are also designed for you to make them uniquely yours with cool graphics that reveal your personality. In addition to the decks, Plan B also produces wheels, toolkits, and the kind of hip clothing that every skateboarder wants to be seen wearing. In addition to Way and McKay, the Plan B team consists of pro skateboarders PJ Ladd, Chris Cole, Pat Duffy, Ryan Sheckler, Torey Pudwill, Leticia Bufoni, Chris Joslin, Felipe Gustavo and Sean Sheffey.
Many cities also began implementing recreation plans and statutes during this time period, as part of their vision for local parks and communities to make public lands more available, in particular, for skateboarding, inviting skateboarders to come in off of the city streets and into organized skateboarding activity areas. By 2006 there were over 2,400 skateparks worldwide and the design of skateparks themselves had made a transition, as skaters turned designers. Many new places to skateboard designed specifically for street skaters, such as the "Safe Spot Skate Spot" program, first initiated by professional skateboarder Rob Dyrdek throughout many cities, allowed for the creation of smaller alternative safe skate plazas to be built at a lower cost. One of the largest locations ever built to skateboard in the world, SMP Skatepark in China, at 12,000 square meters in size, was built complete with a 5,000-seat stadium.
Grind King skateboard trucks are the best trucks available for grinding. The truck hangar is made from aluminum, making it softer and weaker, but better for grinding. This means you will have to replace them faster if you grind, but your grinds will be smoother and better. Grind King trucks do use special hex-head kingpins, so you will need a special tool to adjust them.
Chocolate Skateboards is a skateboarding company distributed by Crailtap. Following on the heels of Girl, Chocolate was launched in 1994 by Mike Carroll and Rick Howard and is known by its Chocolate hearts logo. Their skateboards are made of durable seven-ply maple. Graphics are also important to the Chocolate brand, and you will find things such as classic cars or cartoons. You can find complete Chocolate skateboards with deck, trucks, wheels and bearings, customized decks, accessories, and apparel. The Chocolate team consists of Vincent Alvarez, Kenny Anderson, Chico Brenes, Justin Eldridge, Jesus Fernandez, Chris Roberts, Elijah Berle, Stevie Perez, Raven Tershy, and Jerry Hsu.
“I think it’s just also like, people want to have fun. If you watch say those types of Street League type of skateboarders, who are super amazing skateboarders that can push these crazy tricks down rails and stairs, like switch tre down fifteen stairs or whatever trick they do — it’s amazing to see that level of skating, but if you are an average Joe living in a small town you’re just like, “I’m never going to be able to kickflip back noseblunt twenty-stair rails”. That’s always the biggest trick. If you ask me it’s like, “What videos do you really enjoy?” The videos that you can some how relate to. Like, “Hey, I could actually do some of these tricks.” You connect to it and you feel like you can picture yourself being a part of the whole thing. When people put out these amazing super stunt skateboarding videos, pushing it to the furthest level possible, that’s rad in one sense, but to me personally as a kid I could never in my wildest dreams believe that I could do that too. I respect it. I understand it. But does it make me want to go skate? No.”
POSITIV has begun to gain some serious momentum in the past years. They released an entire line of team completes in sizes ranging from 7.5-8.0″ at very affordable prices. This specific deck is 7.75″ so it is a comfortable size for all ages and weights. The great thing about this board is that it includes MiniLogo bearings and other pro brand parts. The deck also uses a rare waterproof sealant and slide coat to ensure that the deck lasts longer and slides smoother than other skateboards on the market. The overwhelmingly “positive” (no pun intended) reviews speak for themselves with this skateboard.
Powell Skateboards is one of the original skateboard companies who dates back to 1978 and who has consistently been a top skateboard brand. If you or someone you know skated in the 1980’s, chances are it was on a Powell skateboard. Though Powell had a short lived split between cofounders, George Powell and Stacy Peralta, they regrouped to produce “top of the line” skateboards under the Powell Classic name and succeeded in becoming one of the most successful skateboard companies. Something stuck through that split and they made the list for clear understanding of the fundamentals of a quality skateboard and easily became a perfect quality skateboard brand..
You know how people say shit like: Ernest Hemingway is “a writer's writer” and it's not really clear what that means, but you sort of get it? Well Anti-Hero is a skater's skate brand. Founded by underground hero pro skater Julien Stranger, Anti-Hero is a direct expression of his attitude towards the skate industry, which is basically that skateboarding is life and fuck everything else. Anti-hero has a reputation for being one of the gnarliest skate brands around, thanks in part to their team of heavies which includes John Cardiel, Tony Trujillo, and Chris Pfanner.