Grip tape adds additional assurance for a rider's feet. It is made from a sheet of colored paper or fabric with adhesive on one side and a fine, sand paper surface on the other. Applied to the top surface of a skateboard, grip tape gives a person's feet an improved grip while maintaining stability for performing tricks. Skateboard trucks connect both the wheels and ball bearings to the deck and are directly attached to the deck themselves. They are usually constructed from aluminum alloy. The wheels are mounted to their axles via steel bearings. The wheels are made from polyurethane and available in a range of different shapes and sizes to suit most any skill level.
By the 1960s a small number of surfing manufacturers in Southern California such as Jack's, Kips', Hobie, Bing's and Makaha started building skateboards that resembled small surfboards, and assembled teams to promote their products. One of the earliest Skateboard exhibitions was sponsored by Makaha's founder, Larry Stevenson, in 1963 and held at the Pier Avenue Junior High School in Hermosa Beach, California.[12][13][14] Some of these same teams of skateboarders were also featured on a television show called "Surf's Up" in 1964, hosted by Stan Richards, that helped promote skateboarding as something new and fun to do.[15]
The promo was followed in late 2012 by another Polar Skate Co. Promo – No complies & wallrides & shuvits again filmed in and around Malmo, Sweden as well as Copenhagen, Denmark, New York and London, featuring skaters who appeared in the original promo, plus new addition and former Uk-born Blueprint skater Jerome Campbell and New York based Aaron Herrington who would go on to turn pro for Polar.
I rode for them as a ‘Amateur’ skateboarder in ‘79-’80, and they, at that time, had one of the Best boards out on the market, made of Fiberglass in a torsion box, with a foam core, and urethane ‘bumpers’ all around. I still have that board, and one set of C-70 Reds from then. I skated that gear hard, for many years, too. I still own 6–7 full sets of “krypto’s” for skateboards, and 8 that’re on quad-roller-skates. Great wheels, and they’re still in use.

Now given this guide is not for experienced and professional skaters, as per out brand rating criteria Plan B does not score that well mainly because of the issue that some skateboards come unassembled which can be overwhelming. If this were on an intermediate rider scale, then the brand score would have been much better. Anyways, here is the brand score of this amazing skateboard brand. 

A skateboard consists of a deck, trucks, wheels, bearings, hardware, and griptape. All parts come in a variety of sizes, graphics, colors, and signature pro series. The deck is the essential part of any skateboard. The deck ranges generally from 7.5" to 8.5". Skaters choose their board size for many reasons, but the basic deciding factor comes down to style of skating and foot size. Transition skaters usually ride a wider deck, while street skaters tend to go with a smaller deck. Skate brands such as Girl, enjoi, and Welcome offer a wide range of boards in regards to sizes and graphics. Skateboard trucks come in either a high or low setting, and also in a range of widths. The main factors in a truck, are how well they turn, and how well they grind. Independent, Venture, and Thunder, are truck brands that are well known for their turning and grinding capabilities. The skate hardware is generally either Phillips head or Allen key bolts. The skateboard wheels range from 50mm to 60mm. Some brands offer smaller and larger sizes, but 50-60mm is the general range. Like the deck sizes, wheel sizes depend on the skater's choice of terrain: Transition skaters tend to ride bigger wheels, while street skaters usually go with smaller wheels. Bones, Spitfire, Ricta, and Wayward wheel companies all make wheels for any terrain, whether you're a street shredder or a park burner. Skate bearings follow the ABEC rating system, which includes grades 1, 3, 5, 7, and 9. Bones, Bronson, and Andale are some of the top bearing brands in the skate market. CCS proudly carries all these brands, and many more.
Prior to the mid-seventies many early skateboards were originally based upon the concept of “Sidewalk Surfing” and were tied to the surf culture, skateboards were surfboard like in appearance with little to no graphics located under the bottom of the skateboard-deck. Some of the early manufactured skateboards such as "Roller Derby", the "Duraflex Surfer" and the "Banana board" are characteristic. Some skateboards during that time were manufactured with company logo's or stickers across the top of the deck of the skateboard, as griptape was not initially used for construction. But as skateboarding progressed & evolved, and as artist began to design and add influence to the artwork of skateboards, designs and themes began to change.[92]

Skateboarding has also become a major source of inspiration for high-end fashion brands, as they design their own interpretations of the skate culture and style from graphic T-shirts, five-panel hats, cropped, wide-leg pants, and skateboarding sneakers from the brands like Vans. But there’s no faking the original, and the brands that do it best are the ones that have a long-time heritage in the sport of the board, unlike the luxury labels simply trying to capitalize on the look.


Decks come in a variety of shapes and sizes. You can choose a mini-board, a cruiser, a drop-through, or a standard deck for your favorite set of wheels and hardware. Widths range too from a few inches with a 22-inch board to the wide size of a true cruiser. Some decks are flat as possible while others are significantly concave for optimized turning. You can buy a deck with artwork and grip tape already attached for a quick install or you can get a bare-bones wooden deck to truly customize.
Similar to sandpaper, grip tape, or “grip” as it’s commonly referred to, is applied to the top of your deck for traction. Grip gives you the friction you need to perform tricks such as ollies and kickflips. Not all grip tape is the same however. Each brand's products perform differently, so you may want to experiment with different brands to get a feel for what you prefer.
Since Fine Artists Vol 1, Element have released numerous videos including Element – Third Eye View (1998), Element – Rise Up (2005) which focused on the brand’s European team, and more recently, the short video Element – Rise and Shine (2011) focusing on Element team rider Nyjah Huston. Element’s video output is unparalleled with releases from all over the globe – most of which can be found via the link above..
TIP: Extra width and short noses make old school boards more difficult to flip or lift off the ground, so they are not ideal for street skating. With some old school boards, the truck mounting holes are drilled to only fit certain trucks, so make note of the truck pattern before you buy the deck. If you’re not sure your trucks will fit, just give us a call and we’ll figure it out. Shop Old School Compatible Trucks
The Krown Rookie Skateboard Complete 7.5 comes with thick, sturdy 7-ply maple wood deck. It gives you more control and permits you to perform various tricks. It features carbon steel ABEC-3 bearings, aluminum trucks, bushings and 54mm x 34mm wheels. This board is perfect for kids who are 8 years and older. It has a maximum weight capacity of up to 220 lbs.

In an industry as diverse as skateboarding, the sheer number of skateboard brands on the market can be bewildering. With a seemingly never-ending amount of new brands emerging, alongside the numerous pre-existing ones, the market can certainly appear over crowded and confusing at times, which is hopefully where this list of some of our favourite skateboard brands comes in.
×