It’s best to not go overboard with spending a lot of cash on your first skateboard. After all, it will take a lot of beating, and will surely be reduced to looking like a scratched plank of wood! Best skateboards to learn on include budget, beginner skateboards that offer you all the quality features a more expensive skateboard would, but at a lower expense. If you are new to skateboarding, it’s also recommended to get a skateboard with smaller wheels, since they go slower and are less intimidating!
Illegal skating includes jumping over cracks or obstacles on the sidewalk (rather than stopping, picking up one’s board and walking around the obstacle), turning, riding over certain public property and any stopping maneuver that could be considered a trick. A ticket for skateboarding is a traffic violation, but skaters are more commonly cited for vandalism or trespassing—misdemeanors that stay on a skater’s record and usually carry a fine or a sentence of 40 hours of community service, or both.
Similar to sandpaper, grip tape, or “grip” as it’s commonly referred to, is applied to the top of your deck for traction. Grip gives you the friction you need to perform tricks such as ollies and kickflips. Not all grip tape is the same however. Each brand's products perform differently, so you may want to experiment with different brands to get a feel for what you prefer.
Uses Smaller Wheels For Improved Stability – Any true skater knows that wheels are essential in terms of the type of skating performed. Powell Classic, being an original company, understands that most skaters are doing tricks or will be doing tricks. To provide greater stability, they release boards with smaller wheels designed for basic street skating.

Krux make some great trucks. Krux makes "downlows" trucks, that have a lower hanger and kingpin than even Grind King. However, you will need a hex tool to adjust them. The Krux IIIs with Topless System are even lighter, with special bushings that feel broken in from the start, but that also provide a faster snap back into position. Krux trucks are light and low.

Keep in mind that the deck width will also affect the size of the trucks that you use. You’ll need wider trucks to make a wider deck more stable. If you see a wide deck with narrow trucks, you can expect the ride to be wobbly and hard to manage. Pay attention to the bushings on the board as well. If the bushings are very firm, you’ll have a more stable ride, but it also makes it harder to turn. Soft bushings are much more responsive, but you do lose a little bit of stability. If you don’t know if your bushings are firm or soft, you likely have soft bushings, since this is the default.

Navigator is a newer truck company and may be hard to find (the Navigator site has a store locator that should help). I've listed them here because they have some unique features on their trucks. For example, they have a special addition beneath the baseplate that holds the kingpin in place so bushings can be replaced without taking the trucks off of the skateboard. Also, Navigator is the only truck company that pins their axles, so they can guarantee their axles will NEVER slip! The Navigator site lists many other features - take a look and see what you think.
The magazine only lasted four issues, but resumed publication as Skateboarder in 1975.[16][17][18] The first broadcast of an actual skateboarding competition was the 1965 National Skateboarding Championships, which were held in Anaheim, California and aired on ABC’s “Wide World of Sports.[19][20] Because skateboarding was a new sport during this time, there were only two original disciplines during competitions: flatland freestyle and slalom downhill racing.[6]
We have unfortunately seen low quality skateboards that even try to use plastic trucks (please avoid). However it can be really hard to spot a poorly made metal truck without skating it. Brand awareness can come into play here again. The manufacturers name should be marked on the trucks. A quality set of trucks (2 per board) could start out as low as around $30 and will go up from there. 

If you want to do cruising and street style on the same board then you probably want a large board and larger wheels, as many have already commented. I think that an 8 inch board with at least 56 mm wheels will be best. I think that you should find a local shop to support and to talk to about gear. I would advise getting a shop deck, with Independent trucks (at the correct width for your board, which is one detail that a local shop should be able to help with) Bones street tech formula wheels (I like profiles 1 and, I think 5), and Bones Reds bearings (not super reds, super reds are not super).


The skateboard industry is as colorful and competitive as the sport itself.  It’s no surprise that the top skateboard brands all take on that daring, free expression and edgy creativity that is quintessential to the skateboarding community.  But it’s not all fun and games — it takes a lot more than producing wooden decks with dope graphics to make it to the top.  It takes hands-on dedication and genuine passion for the sport.

^ Jump up to: a b c d e f "Skateboarding" (PDF). Pennsylvania Avenue National Historic Site Management Plan: Visitor Information, Education and Enjoyment. Washington, D.C.: National Mall and Memorial Parks: National Park Service: United States Department of the Interior. April 2014. pp. 24–25. Archived from the original (PDF) on March 4, 2017. Retrieved March 29, 2017. Skateboarding damages stonework, walls, steps, and sculpture in some areas and presents a persistent law enforcement and management challenge. Damaged areas include stone facing on memorials, benches, and other surfaces. Moreover, popular websites advertise the attractiveness of these areas for skateboarding, which indicates the large scope of this challenge. .... Actions: .... In park areas replace and maintain “No Skateboarding” signs that have been vandalized.
There were several artistic skateboarding pioneers that had an influence on the culture of skateboarding during the 1980s, that transformed skateboard-deck art like Jim Phillips, whose edgy comic-book style "Screaming Hand", not only became the main logo for Santa Cruz Skateboards, but eventually transcended into tattoos of the same image for thousands of people and vinyl collectible figurines over the years.[93][94][95] Artist Vernon Courtlandt Johnson is said to have used his artwork of skeletons and skulls, for Powell Peralta, during the same time that the music genres of punk rock and new wave music were beginning to mesh with the culture of skateboarding.[8][96][97] Some other notable skateboard artists that made contribrutions to the culture of skateboarding also include Andy Jenkins, Todd Bratrud, Neil Blender, Marc McKee, Tod Swank, Mark Gonzales, Lance Mountain, Natas Kaupas and Jim Evans.[98][99]
Spotting a poorly made skateboard deck can be hit or miss. Some toy skateboards don’t even try to look “real". They might have no concave to their shape and may not even have a extended nose. Others may be shaped to resemble a real skateboard, but are made with cheap woods and fillers. If that is the case, they may be both thicker and heavier than a quality board, or they may be ready to fall apart quite quickly and easily. Consider that it isn’t easy to make a real skateboard deck. Most legitimate skateboard decks will sell for somewhere between $35 - $55. If you are paying that much for the entire skateboard, it is unfortunately a sign that significant corners were cut on quality. 
Following The Real video, the brand released full-length videos at regular intervals, with each release being celebrated as a classic overview of the era involved. 1997’s Non-Fiction, featuring founder Jim Thiebaud and a revamped team including the likes of Mark Gonzales, Keith Hufnagel, Joey Bast, Drake Jones and one-time Real female rider Jamie Reyes is seen these days as one of the precursor’s of skateboarding’s general shift away from unbridled technical progression towards a heavier emphasis on style.
“I think it’s just also like, people want to have fun. If you watch say those types of Street League type of skateboarders, who are super amazing skateboarders that can push these crazy tricks down rails and stairs, like switch tre down fifteen stairs or whatever trick they do — it’s amazing to see that level of skating, but if you are an average Joe living in a small town you’re just like, “I’m never going to be able to kickflip back noseblunt twenty-stair rails”. That’s always the biggest trick. If you ask me it’s like, “What videos do you really enjoy?” The videos that you can some how relate to. Like, “Hey, I could actually do some of these tricks.” You connect to it and you feel like you can picture yourself being a part of the whole thing. When people put out these amazing super stunt skateboarding videos, pushing it to the furthest level possible, that’s rad in one sense, but to me personally as a kid I could never in my wildest dreams believe that I could do that too. I respect it. I understand it. But does it make me want to go skate? No.”
Choosing a good skateboard can be tricky, if you're a beginner in the sport. There's a lot that you have to take into account, in addition to the cost. You have to also consider the complete board, the deck, the trucks, and the wheels, whether you're buying a ready-made skateboard or are putting together your own. Once you understand what makes a good skateboard, you'll be hitting up the skate parks in no time.
Founded in 1994, and going strong ever since, Globe is one of the top quality skateboard brands in the world. They are a global producer and distributor of skateboards and skateboarding gear; selling products in over 100 countries. This is the best brand of skateboard. They are known for their purpose-built apparel, skateboard decks, trucks, wheels, etc, footwear and major surfing and skateboarding events (just to name a few of their ventures). Due to their presence in the boarding industry, Globe has gradually become one of the best skateboard brands in the market.
Modern decks are made with a composite of thin layers of either maple or bamboo pressed into a near symmetrical shape with a nose equal to or longer than the tail. The deck should be concave (subtle U shape) along the whole board with both the nose and tail angled upwards (the "kick" of the board). Conceptually while the skateboard is a platform, it also serves to cup the balls of the skater’s feet with rising sides, nose and tail providing the foundation for pretty much all modern skateboard tricks.
When you’re searching for one of the best decks on the market, it’s important to not go overboard. You don’t need one that is made from the rarest wood or that has the most unique design. The best boards may be the ones that balance cost, design, and quality. After all, with healthy use, you’ll eventually have to replace your deck anyway. You want the one that will give you the most functionality and enjoyment while you use it.

It can be frustrating to choose the top skateboard brand for your needs with so many brands bubbling up in the market. How do you separate the top brands from the average ones? How does a customer know which skateboard brand will give them their money’s worth? Just to help you guys answer all those questions at one place, we came up the easiest solution.

Moving on to our favorite pick from the Plan B series, Plan B Skateboard Complete Felipe Victory 7.6″ Tensor Assembled, suitable for all kinds of riders, but is an ideal skateboard for intermediate skateboard riders. The deck is made from 100% North American maple and measures 7,6 inches. Its wheels are 52mm TGM wheels which means it is excellent for both street and park skating. We also love its lightweight trucks and heavy-duty aluminium with grade 8 steel kingpins and axles plus the bushings (USA made) and pivot cups. The bearings are rated 5 on the ABEC scale.


As the name implies, a complete skateboard contains all the parts listed above, but in an already assembled ready-to-ride skateboard.  The advantage to buying a complete is it completely eliminates the research and guesswork of buying each product individually and ensures that the skateboard is assembled correctly and safely.  This is the approach I used when buying a skateboard for my nephew and what I recommend for people buying a skateboard as a gift or as their very first skateboard for themselves.
Element, based out of Irvine, CA, is one of the cool skateboard brands today. They came in first on our list due to their quality boards, sustainable practices and the affordability they offer customers. They’re an environmentally responsible brand who creates their boards without causing any environmental damage. The Element team behind the company is comprised of a group of professional skateboarders who interact with a strong belief in the Element brand. They not only offer great products, but stand for an open minded and active lifestyle and have become one of the best skateboard brands in the world.
The first skateboards started with wooden boxes, or boards, with roller skate wheels attached to the bottom. Crate scooters preceded skateboards, having a wooden crate attached to the nose (front of the board), which formed rudimentary handlebars.[6][7][8] The boxes turned into planks, similar to the skateboard decks of today.[9] An American WAC, Betty Magnuson, reported seeing French children in the Montmartre section of Paris riding on boards with roller skate wheels attached to them in late 1944.[10]
The Wonnv Retro Mini Cruiser 22 inch Complete Skateboard is 22″ Light Up Clear Banana Skateboard.  It is complete with Light Up Board, Wheels, Metal Trucks, ABEC-7 Bearings, and High-Quality Bushings.  The set also includes 6″ Metal Trucks, High-Speed ABEC-7 Bearings, High-Quality Bushings, and Hardware.  It has a unique Textured Waffle Pattern on Deck and designed for Maximum Grip.  The Deck measures about 22 x 6 x 4″.  It has a 6″ Truck Axle and 3″ Truck Hanger.  It requires 2 AAA Batteries and is recommended for skaters who are 6 years old and Up.  It has a 5 rating on Amazon.
A skateboard is a special type of sports equipment crafted from a long piece of maple wood with a polyurethane coating for increased durability and easy sliding while in motion. The wood is attached to four wheels and propelled forward by either the push of a rider's foot or by the gravitational forces acting upon them in a given circumstance, which means that a rider can simply stand on the board's surface and ride it downhill without using their feet at all. Skateboards are available as either long boards or short boards. Long boards are usually between thirty-five and sixty inches long and are ideal for cruising purposes and downhill racing. They are typically more expensive than short boards, which are around thirty inches long and are designed for getting air and performing stunts or tricks.
A magazine?! This is an outrage! Yeah, it is. But Low Card has become the defacto hat brand for all the cool hesh skaters in America, so deal with it. Also, the mag's graphic tees, baseball shirts, coaches jackets, and beanies are all highly dope. The custom mesh hat program is the way to go if you feel the need to wear your “yeah, I skate” calling card on your head.
When looking at skateboarding’s history, the only thing that’s stayed the same is the overall structure: every board consists of four skateboard wheels, two skateboard trucks, and a riding surface of some kind. And while we’ve come a long way from the days of metal and clay wheels, some aspects of skateboarding - like the brands manufacturing some of the most trusted products - haven’t changed at all. Independent Trucks has been designing trucks since 1978. Powell Peralta, the company responsible for Powell Skateboards, Bones Wheels, Bones Bearings, and the Bones Brigade also started in 1978. NHS, Inc., the company that produces Santa Cruz Skateboards, Independent Trucks, Bronson Speed Bearings, Krux trucks, Flip Skateboards, Ricta Wheels, Mob Grip, and OJ Wheels started in 1973. It’s no wonder these brands are still doing so well - they’ve been with skateboarding since the beginning. Since the day skateboarding went from something surfers did when the waves were flat to its own sport that involves technique, practice, and careful consideration, a small handful companies have been there to help skateboarding become what it is today.
Fox and Deacon re-branded Deathbox in 1991 as Flip skateboards and announced the four man team as consisting of Geoff Rowley, Rune Glifberg, Andy Scott and Tom Penny. After nearly being put out of business when a flood destroyed much of their stock, Fox, Deacon and the four team riders began to plan their move from the UK to Huntington Beach, California in order for the brand to grow further.
×