Keep in mind that the deck width will also affect the size of the trucks that you use. You’ll need wider trucks to make a wider deck more stable. If you see a wide deck with narrow trucks, you can expect the ride to be wobbly and hard to manage. Pay attention to the bushings on the board as well. If the bushings are very firm, you’ll have a more stable ride, but it also makes it harder to turn. Soft bushings are much more responsive, but you do lose a little bit of stability. If you don’t know if your bushings are firm or soft, you likely have soft bushings, since this is the default.
Figuring out how to buy a skateboard can be daunting, especially if you’re not sure what you are looking for. There are customizable parts, accessories and some fancy technology that can be overwhelming. Good news is, we can simplify it for you! At Tactics, our crew is full of daily skaters, so we put our heads together to break it all down and give you the basics, plus a few recommendations.
“As far as the actual look of the vast majority of contemporary graphics goes, I’d say that it feels to me as if something has been lost. It’s down to what you can do with modern heat transfer printing techniques – you can literally just take a photograph from the Internet and print it identically straight onto a skateboard. Speaking personally, there’s very little to challenge you there: either from the point of view of creating graphics, or from the consumer’s perspective. Whereas back when screen-printing was the norm, every time a graphic was produced the artist was physically cutting the key line out by hand. The key line is the final black line that forms the outline of whatever it is that you’re printing and ties in all the other colours together. You can see this in the early Sean Cliver graphics for example, where it’s clear that he has hand cut the key lines as precisely as he was able to, but looked at from today’s perspective they’re not perfectly precise, which is what gives Cliver’s earliest stuff its specific look in my opinion.”

^ Jump up to: a b "Pennsylvania Avenue National Historic Site" (PDF). National Register of Historic Places Registration Form: National Park Service: United States Department of the Interior. Washington, D.C.: Government of the District of Columbia Planning Office. pp. 191–192. Archived from the original (PDF) on January 7, 2017. Retrieved March 29, 2017.


We spent 43 hours on research, videography, and editing, to review the top options for this wiki. Whether you are an amateur or a seasoned pro, you'll find a skateboard among our selection that will have you doing everything from acid drops to wheel slides in no time. Or you can simply use one to get around town or to and from school. We've included models for younger riders through to adults, in styles and designs to match any taste, and at prices to meet any person's budget. When users buy our independently chosen editorial picks, we may earn commissions to support our work. Skip to the best skateboard on Amazon.
^ Jump up to: a b "Pennsylvania Avenue National Historic Site" (PDF). National Register of Historic Places Registration Form: National Park Service: United States Department of the Interior. Washington, D.C.: Government of the District of Columbia Planning Office. pp. 191–192. Archived from the original (PDF) on January 7, 2017. Retrieved March 29, 2017.
In the past decade, I have begun seeing the emergence of skate decks being totally or partially made from carbon fiber or other metal materials instead of solely wood.  These decks typically last longer than regular wooden decks and aren’t prone to chipping or breaking like most made from wood.  The drawback to these materials is that they tend to feel “stiffer” than traditional wooden decks and experienced skaters may feel they are heavier and harder to do tricks on.  Carbon fiber decks are also more expensive, but this additional cost may be worth it if you tend to break decks easily.  Some brands also offer warranties against breakage under normal conditions for carbon fiber decks if you are worried about breakage.
Santa Cruz’s earliest videos Wheels of Fire (1987), Streets on Fire (1989), Speed Freaks (1989) A Reason for Living (1990) and Risk It (1990) are viewed today as paradigm-shifting releases which promoted interest in skateboarding globally by giving a platform to every kind of skateboarding that existed, from street and vert skating, through to the more niche genres such as slalom, downhill and freestyle, whilst at the same time retaining the aesthetic of skateboarding’s subcultural position in society.
George Powell continued in business as the Powell Corporation and the brand released numerous videos throughout the 90’s and 00’s, including titles such as Suburban Diners (1994), Scenic Drive (1995) and FUN (2009), whilst simultaneously kick starting the careers of many skaters who went on to become household names such as Chris Senn, Adam McNatt and the UK’s own Danny Wainwright, along with stalwart Bones Brigade member Steve Caballero who stayed with the Powell brand throughout.

One of the skateboarding companies that are at the op is Almost Skateboards, founded by pro skateboarders Daewon Song and Rodney Mullen in 2003 and distributed by Dwindle Distribution. Both had ceased participating in their previous companies, Enjoi and Artafact, respectively. Almost is a brand that concentrates on fun and creativity but on also not taking oneself too seriously. The company produces decks made of 7-ply, 8-ply and carbon fiber constructions, bound with resin epoxy glue. The brand offers completes that include skateboards with the deck, wheels, trucks and bearings, as well as wheels, accessories and apparel. The team consists of Rodney Mullen, Daewon Song, Cooper Wilt, Youness Amrani, Yuri Facchini, Tyson Bowerbank, Fran Molina, and Mitchie Brusco.

If you are eager to have a new skateboard and need to take into consideration your budget, then Landwalker’s skateboard is the prefect board for you, based on personal preference. It’s by far one of the cheapest products on this list, while still giving you sufficient endurance and quality performance. Thanks to the high-density wood, you can rest assured that even if you fall, your skateboard will remain to be in one piece. Preassembled completes are ready to take out onto the road.


Keep in mind how tall you are when choosing a board width. Also consider the kind of style you wish to skate. Most technical skaters (the ones who incorporate advanced flip tricks... like Rodney Mullen) tend to favor boards between 7.5 and 7.75 regardless of how tall or small they happen to be. The upper hand of having a thin board allows for quick rotation. The other side of the spectrum is the "go big" skaters (Jamie Thomas is a classic example of a "go big" guy). Most "go big" guys favor size 8.0 and up. The advantage of a wide heavy board feels more stable under your feet while in mid air and while landing (especially those who have big feet). If your a kid you might want to just stick with a 7.66 or smaller.
They have continued to ride that wave over the past year, continuously putting out great edits, following cherry up with Sickness, Red Devil, Joyride, and Swoosh, all in collaboration with cherry’s filmer Bill Strobeck. We all know they will never fall off when it comes to putting out fire gear every new season and drop, but to keep it coming with actual great footage is another story, and is definitely making skateboarding better today.
Founded by the pro skateboarder Marc Johnson in the year 2000, enjoi has been on the market for over two decades now. They have since expanded, and started producing skateboarding accessories and clothing apart from just skateboards. Since then, they have adopted a panda as their logo. This logo is featured on most of their products and has quickly become the company’s trademark.
Powell has made sure to provide their customers with more than one design of one of their most sought-after skateboards. The Golden Dragon 2 is very similar to its predecessor, the Golden Dragon and is just as reliable as its sister model. When it comes to skateboarding, you can’t ask for a better board than the Golden Dragon 2. It’s durable, firm and thanks to the concave skateboard deck design, will allow you to do many tricks. Tricks, that other boards could possibly not support as well.
The Golden Dragon is a fantastic board for beginners, and it’s all in the wheels. The high-rebound polyurethane wheels are hand-cast and offer amazing grip as you ride, plus fantastic roll. The deck itself is just slightly longer than a standard skateboard, which offers a bit more stability for beginners, who might be worried about sliding or slipping off a shorter board. Additionally, this board features the All Powell-Peralta Ligament strap, an important safety feature that keeps the deck together if it should break. This helps prevent injury and provides a little more peace of mind for the rider.
In 1975 skateboarding had risen back in popularity enough to have one of the largest skateboarding competitions since the 1960s, the Del Mar National Championships, which is said to have had up to 500 competitors. The competition lasted two days and was sponsored by Bahne Skateboards & Cadillac Wheels. While the main event was won by freestyle spinning skate legend Russ Howell,[30][31] a local skate team from Santa Monica, California, the Zephyr team, ushered in a new era of surfer style skateboarding during the competition that would have a lasting impact on skateboarding's history. With a team of 12, including skating legends such as Jay Adams, Tony Alva, Peggy Oki & Stacy Peralta, they brought a new progressive style of skateboarding to the event, based on the style of Hawaiian surfers Larry Bertlemann, Buttons Kaluhiokalani and Mark Liddell.[32] Craig Stecyk, a photo journalist for Skateboarder Magazine, wrote about and photographed the team, along with Glen E. Friedman, and shortly afterwards ran a series on the team called the Dogtown articles, which eventually immortalized the Zephyr skateboard team. The team became known as the Z-Boys and would go on to become one of the most influential teams in skateboarding's history.[27][33][34]
Bearings are standardized to fit in all kinds of skateboard wheels. All bearings will eventually get dirt and gunk in them which slows you down. Regular cleaning is recommended. Higher quality bearings will perform better, roll faster, retain more speed, and last longer when cleaned regularly. Some bearings come with bearing spacers or have spacers built into the bearing. These will fit in any wheel, but are not necessary for most types of skateboarding or longboarding.
Skateboards just aren’t what they used to be, and that doesn’t make Jim Greco, Baker and Deathwish OG, happy whatsoever. Greco started the company last year as an effort to bring back skateboard manufacturing to the USA from overseas in China, using the traditional silk screen ink transfer and hand shaping methods from the early days of skateboarding.
The problem with wheel bite is that it tends to stop the motion of the wheels. This can result not only in a bad wipeout for the rider but also damage to the wheels. With the help of the riser pads, it is easier for you to preserve the deck of your skateboard since these pads can reduce the tendency of having stress cracks on where the trucks and deck meet.
This deck is 6-inches-by-22.5-inches with that classic cruiser shape. The board is made with 6-ply bamboo and maple construction, which is lightweight, flexible, and eco-friendly. Bamboo Skateboards claims this board has a turning radius not seen in most mini decks. The small, blank deck is heavy duty and durable in a way not all mini cruisers are. This non-carbonized board is ready for you to slap on the grip tape and artwork you want and then get riding.
Bearings are very important if you want to keep rolling without pushing constantly, especially while street skating. They're typically rated with the ABEC (Annular Bearing Engineering Committee) scale. The ABEC scale only measures the precision of the bearing, not how well it rolls or how long it lasts. It's a common misconception that the ABEC scale refers to how fast the bearing rolls. Anything above 1 is precision and will perform fine for skateboarding, but it's recommended to go above a 3.
Bearings are standardized to fit in all kinds of skateboard wheels. All bearings will eventually get dirt and gunk in them which slows you down. Regular cleaning is recommended. Higher quality bearings will perform better, roll faster, retain more speed, and last longer when cleaned regularly. Some bearings come with bearing spacers or have spacers built into the bearing. These will fit in any wheel, but are not necessary for most types of skateboarding or longboarding.
FTC has grown from being the staple skate shop of the Bay Area to being a respected brand pushing skateboarding across the globe. Their SF flagship sits in the famous Haight Ashburry district, always attracting visitors and giving them a look into what skateboarding is really like in this day and age. FTC will have you covered in their own gear, and will also always be pushing the next big thing in their shops, and they never make a bad call.
Another bonus of shopping at an actual skate shop is that you get to see what the boards look like in person. Most skate shops will have a cool wall of boards, and it's fun to just stand there and look at all the graphics. If one jumps out and grabs you, then you can ask the shop owner about the brand, and whether it's a good one. There's nothing wrong at all with buying a skateboard deck because you like the graphics!

Progressive designs deliver a more dramatic upward curve and a wider base, providing increasingly secure footing and a locked-in feel. The W-concave shape is more narrow with an additional center curve, allowing for a greater shift in energy between the heel and toe. This design also boasts more responsive control and quick turning capabilities. Tub concave decks resemble the radial shape, however their rails extend at a sharp angle instead of a gradual curve. Asymmetrical decks feature rails that extend at different angles, affording more power to a rider's heels when making turns. Less commonly used are decks with convex and completely flat shapes. Convex boards offer an upwards-arching shape, which some downhill skateboarders prefer for a more natural feel, whereas flat designs increase available foot space and are more popular for experienced riders looking to perform fancy tricks.
The concave of a skateboard deck is how curved the width of the deck is.  Very few skateboard decks have no concavity and are completely flat as then they would break very easily and be hard to do flip tricks on.  Steep concave decks are the most study and best to do flip tricks on because the slope of the deck catches the skater’s toe or heel more easily and flips the board faster than a shallower deck.  Shallow concave boards are better for cruising around and vert skating as they are more comfortable on your feet and more controllable.  In practice, these recommendations are pretty general and it ultimately comes down to personal preference on the the best deck concavity.  But if you have no idea, following the recommendations or picking a board with moderate concavity is a good place to start.
Presenting to you, the next in line for top skateboard brands; Powell Peralta. Established back in 1978, Powell Peralta is perhaps one of the most well-known names in the skateboarding world. It was launched at a time when skateboarding was gaining traction and Powell Peralta rose to prominence. Powell Peralta is also known for featuring the Bones Brigade, which was a team featuring the top players of that time. Peralta left the company in between but both the partners reunited to create magic in the skateboarding community.

Modern decks are made with a composite of thin layers of either maple or bamboo pressed into a near symmetrical shape with a nose equal to or longer than the tail. The deck should be concave (subtle U shape) along the whole board with both the nose and tail angled upwards (the "kick" of the board). Conceptually while the skateboard is a platform, it also serves to cup the balls of the skater’s feet with rising sides, nose and tail providing the foundation for pretty much all modern skateboard tricks.
This deck is 6-inches-by-22.5-inches with that classic cruiser shape. The board is made with 6-ply bamboo and maple construction, which is lightweight, flexible, and eco-friendly. Bamboo Skateboards claims this board has a turning radius not seen in most mini decks. The small, blank deck is heavy duty and durable in a way not all mini cruisers are. This non-carbonized board is ready for you to slap on the grip tape and artwork you want and then get riding.
Fox and Deacon re-branded Deathbox in 1991 as Flip skateboards and announced the four man team as consisting of Geoff Rowley, Rune Glifberg, Andy Scott and Tom Penny. After nearly being put out of business when a flood destroyed much of their stock, Fox, Deacon and the four team riders began to plan their move from the UK to Huntington Beach, California in order for the brand to grow further.
×