Keep in mind that the deck width will also affect the size of the trucks that you use. You’ll need wider trucks to make a wider deck more stable. If you see a wide deck with narrow trucks, you can expect the ride to be wobbly and hard to manage. Pay attention to the bushings on the board as well. If the bushings are very firm, you’ll have a more stable ride, but it also makes it harder to turn. Soft bushings are much more responsive, but you do lose a little bit of stability. If you don’t know if your bushings are firm or soft, you likely have soft bushings, since this is the default.

We have unfortunately seen low quality skateboards that even try to use plastic trucks (please avoid). However it can be really hard to spot a poorly made metal truck without skating it. Brand awareness can come into play here again. The manufacturers name should be marked on the trucks. A quality set of trucks (2 per board) could start out as low as around $30 and will go up from there. 

So now that you have an idea of what size and shape board you like, it’s time to choose a brand. A popular size is an 8.5 skateboard deck. If you were looking for a size 8.5 skateboard deck, you could narrow the decks offered on CCS.com to fit in the 8.25 - 8.5 range. This will show you all the boards in that range, and significantly reduce the boards you have to look through. Now, if you don’t have a preference on board brands, find a graphic you like and you’re all set. If this is your first skateboard or are still learning about what wood and brands you prefer, we recommend checking out a CCS Skateboard. They give you a bang for your buck, that's for sure.
500AlmostAluminatiAnti HeroArborBambooBirdhouseBlindBonzingCometCreatureDarkstarDB LongboardsDogtownDusters CaliforniaElementEnjoiEverseshFlipFocusFoundationGlobeGoldCoastGravityHabitatJartKebbekKrookedLandyachtzLaybackLushMadridMakahaMoonshine MFGOmenPennyPlan BPowell PeraltaPrism SkatePunkedRayneRealRememberRivieraRoad RiderSan ClementeSanta CruzSector 9Suicidal SkatesToy MachineWarehouseZ-FlexZero
Grind King skateboard trucks are the best trucks available for grinding. The truck hangar is made from aluminum, making it softer and weaker, but better for grinding. This means you will have to replace them faster if you grind, but your grinds will be smoother and better. Grind King trucks do use special hex-head kingpins, so you will need a special tool to adjust them.
If Supreme wasn’t featured on this list, we might get a long list of hate in the comments, but I’m not adding it just to satisfy the hypebeasts. Over the past few years, what was previously dismissed as a brand that catered mostly to resellers has once again gained a spot at the forefront of what is important in skateboarding today. With the release of cherry in 2014, Supreme showed the world that they haven’t forgotten their roots, and reminded us they will always be a skateboard company first and foremost.
The list of five best skateboards for beginners will give you a good idea on how to choose the best skateboard for beginners. You can ask assistance from the professional for the tips and tricks to becoming a pro. A good quality skateboard built for beginners can help you learn to ride a skateboard easily and once you are pro, you can advance to intermediate or pro and purchase skateboard for your level. It is an exciting outdoor sport enjoyed by thousands around the world and can serve as a commuting facility to your school, college or workplace.
While the skateboard has a lot of moving parts, one's safety, comfort, and ease to learn new skills and perform tricks are all of equal importance. For this reason, choosing the right type of deck and wheels should be two of the first considerations, as the board's shape, material construction, and wheel makeup will all have a significant impact on your ability to control the equipment and maintain good aerodynamics. Additionally, the width of the deck is important, so one must take their height, shoe size, and style of riding into account in order to ensure the deck offers as much support as possible, regardless of application.
See, not all boards are actually bidirectional. Most have a thick tail and a small nose but not this board. So if you’re a switch skater then this board brand is perfect for you. The urethane wheels are designed for the high stress environments and provide the top speed available. The deck tape provides the perfect grip even for those of us with older shoes that are essentially smooth on the bottom.
If you're in the market for a skateboard for your child, there are some general points to keep in mind: A complete skateboard is one that comes fully built, size doesn't matter, and as with all things you buy, you get what you pay for. Conventional wisdom says to go with a good-quality board that will last longer and is safer. Here are some good choices to check out.
A skateboard is a special type of sports equipment crafted from a long piece of maple wood with a polyurethane coating for increased durability and easy sliding while in motion. The wood is attached to four wheels and propelled forward by either the push of a rider's foot or by the gravitational forces acting upon them in a given circumstance, which means that a rider can simply stand on the board's surface and ride it downhill without using their feet at all. Skateboards are available as either long boards or short boards. Long boards are usually between thirty-five and sixty inches long and are ideal for cruising purposes and downhill racing. They are typically more expensive than short boards, which are around thirty inches long and are designed for getting air and performing stunts or tricks.
Mark Gonzalez can do no wrong, and as long as he is at the head of Krooked, Krooked will be in the conversation. Krooked has been the Gonz’s brainchild for some time now, always featuring a great selection of his unique style of art and illustration. No brand can be held up by one man alone, and the Gonz has made sure to keep his selection of riders carefully picked, with each one bringing their own offerings to the table. Brad Cromer is not Ronnie Sandoval is not Mike Anderson, yet somehow it all works out and comes together to create one of the best brands out.
Many jurisdictions require skateboarders to wear bicycle helmets to reduce the risk of head injuries and death. Other protective gear, such as wrist guards, also reduce injury. Some medical researchers have proposed restricting skateboarding to designated, specially designed areas, to reduce the number and severity of injuries, and to eliminate injuries caused by motor vehicles or to other pedestrians.[102]
The skateboard companies that are considered at the top include Element Skateboards. Founded by professional skateboarder Johnny Schillereff in 1992, the company’s goal was to expand on Johnny’s “Elementality” vision to build a company that helped to bring awareness to skateboarding. The goal is to focus on its uses in nature and the environment and the interconnecting of art and skateboarding. Developed from an urban mentality that was rough around the edges, the brand was transformed to embrace the “tree” logo with an emphasis on the positive and making the world a better place. A customer can purchase complete skateboards that include the decks, wheels, trucks, and bearings or they can customize a deck to suit their needs. Accessories and clothing are also offered. There are 20 professional skateboarders on the Elements team including such names as Brandon Westgate, Nyjah Houston, Mark Appleyard and Nick Garcia.
SkateXS makes skateboards for kids, but the quality of the product is just as high as skateboards for adults. Many parents report their children being incredibly satisfied with the product. The reviews are 90% positive, and it’s easy to see why so many family members and friends turn to buying this skateboard for their young ones. Read on for more to consider when buying a skateboard for beginners.
As Palace’s reputation began to grow, the brand added more riders, including ex-Stereo Skateboards pro Benny Fairfax, ex-Blueprint Skateboards pros Danny Brady and Chewy Cannon and Southbank mainstays Karim Bakhtaoui and Blondey McCoy. From the outset, Palace’s approach was to mix a core skate team with a heavy emphasis on soft goods which almost immediately propelled their appeal way beyond the confines of the skateboard market and expedited their growth into one of the biggest names in the street wear arena.

Severe injuries are relatively rare.[103] Commonly, a skateboarder who falls suffers from scrapes, cuts, bruises, and sprains.[103] Among injuries reported to a hospital, about half involve broken bones, usually the long bones in the leg or arm.[102] One-third of skateboarders with reported injuries are very new to the sport, having started skating within one week of the injury.[102] Although less common, involving 3.5–9 percent of reported injuries, traumatic head injuries and death are possible severe outcomes.[102]
In the early 1970s skateparks hadn't been invented yet, so skateboarders would flock and skateboard in such urban places as The Escondido reservoir in San Diego, California. Skateboarding magazine would publish the location and Skateboarders made up nicknames for each location such as the Tea Bowl, the Fruit Bowl, Bellagio, the Rabbit Hole, Bird Bath, the Egg Bowl, Upland Pool and the Sewer Slide. Some of the development concepts in the terrain of skateparks were actually taken from the Escondido reservoir.[27][28][29] Many companies started to manufacture trucks (axles) specially designed for skateboarding, reached in 1976 by Tracker Trucks. As the equipment became more maneuverable, the decks started to get wider, reaching widths of 10 inches (250 mm) and over, thus giving the skateboarder even more control. A banana board is a skinny, flexible skateboard made of polypropylene with ribs on the underside for structural support. These were very popular during the mid-1970s and were available in a myriad of colors, bright yellow probably being the most memorable, hence the name.
Jump up ^ Williamson, Elizabeth (October 11, 2013). "Skateboarders See a (Kick) Flip Side to the Government Closing: With Washington Plazas Empty and Patrols Down, a Banned Sport Is Suddenly On" (video). The Wall Street Journal, U.S. Edition. Retrieved March 30, 2017. One positive thing about the gov't shutdown – spots at gov't buildings are now skateable – Darren Harper, Pro Skateboarder, via Facebook.
Minority Maple Skateboard is an aesthetically engineered, quality starter skateboard. It is solid to the core. It is made with 7-ply hard rock maple cold pressed into 32×8-inch deck. It is built to endure weight up to 220 lbs. Its mediate concave design makes it perfect for performing tricks with ease and dexterity. Its 5-inch long trucks made with genuine aluminum alloy makes it an epitome of strength and endurance. Its carbon steel kingpin and 78A high rebound PU bushing adds to its strength. ABEC-9 precision bearings are manufactured using chrome steel with 52mm 102A PU wheels making the Minority Maple Skateboard a speedster.
They are also budget friendly when you compare their features and capabilities. The latest technology of developing created a new groundwork in the world of skates. That way the new skaters can quickly learn how to become better and how to practice for professional tournaments. It is widely popular, and that is the main reason why you will see at least one Alien skateboard in any skate park in the world.
When you’re searching for one of the best decks on the market, it’s important to not go overboard. You don’t need one that is made from the rarest wood or that has the most unique design. The best boards may be the ones that balance cost, design, and quality. After all, with healthy use, you’ll eventually have to replace your deck anyway. You want the one that will give you the most functionality and enjoyment while you use it.
It has been our great pleasure to work with Cara-Beth Burnside and Mimi Knoop to introduce many girls to skating, encourage those who were devoted to it, and help craft careers for hoopla's amazing and wonderful team. We are proud of what we did together to further women's skating. The hoopla team was filled with amazing skaters, each a star and inspiration.
Powell Skateboards is one of the original skateboard companies who dates back to 1978 and who has consistently been a top skateboard brand. If you or someone you know skated in the 1980’s, chances are it was on a Powell skateboard. Though Powell had a short lived split between cofounders, George Powell and Stacy Peralta, they regrouped to produce “top of the line” skateboards under the Powell Classic name and succeeded in becoming one of the most successful skateboard companies. Something stuck through that split and they made the list for clear understanding of the fundamentals of a quality skateboard and easily became a perfect quality skateboard brand..
In the skateboarding world, there is considerable shuffling of the famous top brands as not many of them manage to stay in the spotlight for long. This continuous reshuffling paves way for new skateboard brands to come into the spotlight. However, it is important to note that no two brands are the same and comparing them is difficult but the following list has been created by extensive research of the saturated skateboard market and features the best skateboard brands out there that you must give a try. 
Hey, are you looking for a great fun with a fantastic ride? If YES, then longboarding will be the best option for you to realize all of your dreams. Longboarding is an effective form of physical exercise. You can also save money if you will use it when going to a nearby place. Also, if longboarding is your passion and if you are looking for the best longboard, you are in the right place to get additional information about longboards.
(2) Goldchain, Michelle (July 31, 2018). "Why is Pennsylvania Avenue's Freedom Plaza such a failure?". Greater Greater Washington. Retrieved October 30, 2018. One group of people do use Freedom Plaza regularly: skateboarders. The open hardscape and railings of Freedom Plaza make an excellent and popular skate park, though skating there is not actually allowed and Park Police regularly chase skaters from the park.
If you want to do cruising and street style on the same board then you probably want a large board and larger wheels, as many have already commented. I think that an 8 inch board with at least 56 mm wheels will be best. I think that you should find a local shop to support and to talk to about gear. I would advise getting a shop deck, with Independent trucks (at the correct width for your board, which is one detail that a local shop should be able to help with) Bones street tech formula wheels (I like profiles 1 and, I think 5), and Bones Reds bearings (not super reds, super reds are not super).
Buy a quality deck. Decks available at your local department store are usually of low quality and have pictures of cartoon characters on the bottom. If you want an entire board, but don't know exactly what you want, buy a complete skateboard from a company or go to a skate shop and ask the employee about the products. If you want to ride on the streets, get a 7.5 to 8.0 deck, if you want to ride vert, 8.0 and up is probably best. However, it's all personal preference. People street skate all the time with decks over 8.0.
In the ever-volatile skateboarding industry, brands come and go, then come back again, only to go out once more, and eventually make room for the next person who is really in tune with what skateboarding is today. While no two brands can really be compared, the true signifier of their importance in skateboarding is how they can make a difference in the culture and bring something new to the table that hasn’t been done before. Every single brand on this list has been a part of something unique that has made us pay attention to them above all the others out there doing it in this saturated market.
Skateboards, along with other small-wheeled transportation such as in-line skates and scooters, suffer a safety problem: riders may easily be thrown from small cracks and outcroppings in pavement, especially where the cracks run across the direction of travel. Hitting such an irregularity is the major cause of falls and injuries.[102] The risk may be reduced at higher travel speeds.

Whilst this A – Z is by no means exhaustive and there are many brands, both new and old that are not included, we feel that this cross section of companies represents a selection of some of the best choices out there today. The following list of 29 skateboard brands, beginning with Alien Workshop and ending with Zero, covers a huge range of the alternatives within the current market and will hopefully act as a handy guide to those dipping their feet into our world for the first time.
×