If you're in the market for a skateboard for your child, there are some general points to keep in mind: A complete skateboard is one that comes fully built, size doesn't matter, and as with all things you buy, you get what you pay for. Conventional wisdom says to go with a good-quality board that will last longer and is safer. Here are some good choices to check out.

The wheels of your skateboard can greatly affect your ride in numerous ways, such as the speed, your ability to take control of the skateboard’s movements, and what you feel while riding the board. The good news is that they come in various sizes, levels of durability, and colors, allowing you to pick one that suits your skateboard preference and style.
What’s important to consider here is choosing the length based on your riding needs. You might be a street rider and love to do some tricks. You probably need a short board with a narrow profile. Whereas the longboard is only recommended if you are a professional skateboarded and love to cruise around the town and want to improve your balance and stability.
Pro decks are what most people are familiar with and what is seen most commonly around skateparks and driveways around the US.  These decks can have a variety of different logos and images on them and sometimes are a specific professional skater’s pro deck.  Pro decks provide skaters a way to support their favorite riders and have the same equipment they see all their favorite pros using.  The quality of professional decks and parts are almost always very high as they have a reputable and brand image to uphold.  For this higher level of quality and you can expect to pay 2-3x the cost of a blank complete.  If you want to save some money and still have a pro look, there are options available that have generic blank parts with a pro deck.  This may be a good option for a beginner skater who is not yet doing complex tricks that may break these cheaper parts, but they still want the look and feel of a pro skateboard.  As the skater progresses they can then switch out these generic parts for higher-end options as necessary.
It's been a long time since Cara-beth has had a feature in an international skateboard publication and in the September 2008 issue of The Skateboard Mag the longtime silence has been broken with a CB interview. With that in mind there was an impromptu launch party for the issue at the Encinitas Y that found longtime CB mentor Duane Peters, Dave Hackett, Lester Kasai and Tony Mag in attendance. Short but sweet skate session on the vert and bowl ensued and all went home happy. Congrats on a job well done Cara-beth!
A skateboard is fundamentally a sum of its parts. If you want a good skateboard, you’ll want each component to be high quality. We’ll take a look at each part of a skateboard and talk about what quality means for the that component. We’ll try to give tips on how to spot a high or low quality implementation of that component and then we’ll share how SkateXS Skateboards measure up.  
What’s important to consider here is choosing the length based on your riding needs. You might be a street rider and love to do some tricks. You probably need a short board with a narrow profile. Whereas the longboard is only recommended if you are a professional skateboarded and love to cruise around the town and want to improve your balance and stability.
Girl Skateboards, with its distinct “women’s bathroom” logo, is a brand distributed by Crailtap and founded in 1993 mainly by professional skateboarders Mike Carroll and Rick Howard and was created to give pro skateboarders a future. A “Girl” deck is made of seven-ply maple, which is strong and resistant. Decks can be customized in a wide variety of graphics or can feature the “Girl” logo. For those who don’t want to customize, complete skateboards are available that include the deck, wheels, trucks and bearings. Clothing, featuring the Girl logo, are available in a wide variety of styles. Not only does Girl distribute skateboards, but they also make films, videos and more. The Girl team consists of Sean Malto, Brandon Biebel, Andrew Brophy, Mike Mo Capaldi, Cory Kennedy, Rick McCrank, Jeron Wilson, Mike Carroll, Rick Howard, Tyler Pacheco, and Simon Bannerot.

First off, it’s important to decide what you will be using your skateboard for and what you will be doing with it. That’s why it’s important to ask a few key questions: Are you going to be using it every day? Is it for a new hobby? Is it for competition practice? What surface will you be skating on? Will you be partaking in park skating, or street skating?

OneHype Designer Board has its own one of a kind design which is placed through a heat transfer and not a sticker. It measures 8″ W x 31″ L. It’s ready to use. It includes shock pads, durable wheels, smooth bearings, colored bushings, and aluminum trucks. The 7 ply maple deck is tough and can handle several impacts. This board is suitable for all ages.
Many musicians, painters and designers have explored their potentials through skateboarding. When you skate, your inner talents come out in many ways. Painters paint their decks with artistic sceneries and musicians sing while they are deeply involved in cruising through the smooth roads. People with graphic designing and photography passion bring out their skills by taking an incredible picture while skateboarding and edit them beautifully. Skateboarding no doubt polishes your skills!
You can get a lot of advice (and maybe too many opinions) from fellow skaters. Some of it might not be as informed or educated as a shop owner's (and some might be flat-out bad advice), but it should at least be sincere! If you don't have a local skate park, or are too uncomfortable to walk up to people and ask, you can also ask around on a skateboarding forum. People there will be more than happy to tell you what they think about deck brands.
These are commonly found at walmart. Price is usually around $50, which is the price for a good set of longboard wheels. If you want a good longboard and you are on a budget, search for a bargain of a name brand on craigslist or other similar sites. Sometimes you find a jem forn cheap. I recommend buying a reasonably priced name brand such as flippin board co, landyachtz, or loaded . Hope this helps :—)

As loosely defined as Bronze is, Peter Sidlauskus seems to be incapable of doing anything wrong in his marketing for the brand, endlessly putting out amazingly hilarious and gnarly New York based edits featuring a loose group of guys we can say make up their “team.” Bronze brings an aesthetic that falls somewhere between vaporwave and deepweb, and is always making gear that you can rock on the daily, from pink dad hats to coaches jackets. You might have even seen their flip of the Windows 98 logo on the backs of people like ASAP Nast.


Skateboarding has also become a major source of inspiration for high-end fashion brands, as they design their own interpretations of the skate culture and style from graphic T-shirts, five-panel hats, cropped, wide-leg pants, and skateboarding sneakers from the brands like Vans. But there’s no faking the original, and the brands that do it best are the ones that have a long-time heritage in the sport of the board, unlike the luxury labels simply trying to capitalize on the look.
A 100% genuine Penny board. It is a complete skateboard featuring classic design. Its design reference comes from 1970s boards. It replicates the retro era skateboard. Its small size makes it an ideal cruiser providing you with ease of using it anywhere. Whether commuting to your school or surfing along with friends, Penny Complete Skateboard provides a smooth ride. It is lightweight and easy to carry around as well. It can easily bear heavy weight and will not give in. You can easily master your skateboarding skills and become a pro using genuine Penny Australia Classic Complete Skateboard.
The brand based in Vancouver provides skateboards featured with construction of fiberglass and bamboo, Rayne longboards assure the best skating experience you can imagine. Decks made by Rayne has the ultimate crispy flow produced from the highest quality bamboo. The boards come with unique designs that standing out with the cool personality that beats other competitors in the market.
Their fan base loves them for pushing goofy but fun looking skating that in reality is heavier and rawer than most will realize, and their board graphics and t-shirts feature art from their riders in striking colorways. Their product immediately stands out among the bunch at any shop it’s stocked. These guys are doing things exactly their way, and it’s sticking.

Many jurisdictions require skateboarders to wear bicycle helmets to reduce the risk of head injuries and death. Other protective gear, such as wrist guards, also reduce injury. Some medical researchers have proposed restricting skateboarding to designated, specially designed areas, to reduce the number and severity of injuries, and to eliminate injuries caused by motor vehicles or to other pedestrians.[102]


In the ever-volatile skateboarding industry, brands come and go, then come back again, only to go out once more, and eventually make room for the next person who is really in tune with what skateboarding is today. While no two brands can really be compared, the true signifier of their importance in skateboarding is how they can make a difference in the culture and bring something new to the table that hasn’t been done before. Every single brand on this list has been a part of something unique that has made us pay attention to them above all the others out there doing it in this saturated market.
These are commonly found at walmart. Price is usually around $50, which is the price for a good set of longboard wheels. If you want a good longboard and you are on a budget, search for a bargain of a name brand on craigslist or other similar sites. Sometimes you find a jem forn cheap. I recommend buying a reasonably priced name brand such as flippin board co, landyachtz, or loaded . Hope this helps :—)

TIP: Extra width and short noses make old school boards more difficult to flip or lift off the ground, so they are not ideal for street skating. With some old school boards, the truck mounting holes are drilled to only fit certain trucks, so make note of the truck pattern before you buy the deck. If you’re not sure your trucks will fit, just give us a call and we’ll figure it out. Shop Old School Compatible Trucks
Element is of the most mainstream brands in the industry today that has sponsored legends like Nyjah Huston and Bam Margera.  There are many pro decks to choose from with some amazing tribal designs and they have introduced a “featherlight” technology that allows Element to have some of the lightest boards on the market today.  Some may call Element “too mainstream” or “sellouts”, but at the end of the day, they produce quality products in a variety of artistic designs.

Prior to the mid-seventies many early skateboards were originally based upon the concept of “Sidewalk Surfing” and were tied to the surf culture, skateboards were surfboard like in appearance with little to no graphics located under the bottom of the skateboard-deck. Some of the early manufactured skateboards such as "Roller Derby", the "Duraflex Surfer" and the "Banana board" are characteristic. Some skateboards during that time were manufactured with company logo's or stickers across the top of the deck of the skateboard, as griptape was not initially used for construction. But as skateboarding progressed & evolved, and as artist began to design and add influence to the artwork of skateboards, designs and themes began to change.[92]
I really recommend searching up a local skate shop man. Get a shop deck instead of a company deck ya you look cool.with a gold primitive deck but all skateboards do the same thing.shop decks are much more cheaper With really good quality wood too, your shoe size don't matter at all my friend is 6' with a size 13 shoe and rides a7.75 lol. But the smaller the board the easier to flip the board with tricks. A more wider board gives you more room to land on doing stairs and gaps. Me i ride a8.25 i love it but at times i feel like riding an 8.1. Most local shops will give you a free sheet of griptape instead of wasting like 10$ on one. Trucks i recommend thunder hollow lights. They're so light on you skateboard and are durable. Hardware are the bolts that hold it all together i really like having colored ones so i can tell the nose and tail of the board. Wheels get spitfire man street tech formulas i love them so much about 25$ though. It's worth it tho. Bearings you can spit fire bearings too thet are ok but the more expensive the bearings the better. There's also bones red bearings another great bearing brand. In total cost bro it should come to around 120$ or just a slight bit more. For skate shoes always get sued shoes they last way longer and have better grip. To learn the basic tricks go to YouTube and look up braille skateboarding. He teaches you the basics very clearly and detailed where to put your feet and stuff. Not only that YouTube channel look at different skate videos youll get inspired to land that trick too. Skateboarding is sick bro no one tells you how to skate you know it's pure freedom. Hopefully you get a mean Ass setup man and get to skating!!! Remember skate or die !!!!
The skateboarding industry has changed so much in the last few years. Female skaters now get the support they need from bigger companies. I know hoopla helped pave the way for this to happen. It was so rewarding and surreal to have had such a rad team of girls represent hoopla over the years. I am stoked to have formed friendships with such a diverse and talented group.

If what you want is the classic skate park skateboard that you see teens riding around all day, the MINORITY is the board for you. This is an extremely sturdy and durable board that can hold up to 220 pounds, and is made for trick riding especially. The strong trucks, medium concave shape, and high-rebound bushing all make this a fantastic board for ramps, pools, and street riding.

Without good grip tape, skaters have a tough time staying on top of their board. The main complaints about poor grip tape tend to be that it was never very grippy or lost its grip really quickly. Once again, we recommend trusting in name brands with years of experience supporting skateboarders. Unfortunately, if you are buying a pre-made complete skateboard, you probably won't have access to the brand name of the grip. 


Penny Skateboards have a reputation of exceeding customer expectations and have a growing fan base. People love their aesthetically pleasing, good functioning plastic skateboards which are also, by the way, best skateboards for beginners. Their plastic formula for skateboard decks makes their decks stronger and more flexible than all other plastic skateboards. Its light weight and small size makes it easier to use for beginners and kids alike. Moreover, Penny is also famous for the variety of skateboards that it provides ranging from their classic skateboards to their glow series, graphic and metallic fade skateboards. We saved the best for the last; you can even design your own Penny skateboard!
Krooked’s video release to date include ‘Krooked Kronichles‘ (2006), the experimental ‘Krooked – Gnar Gnar‘ (2007) only released on VHS in limited numbers, predating the explosion of interest in the outdated VHS format as foregrounded by brands such as Palace skateboards some years later, ‘Krooked – Naughty‘ (2008) and Krooked – Krook3D (filmed in both regular and 3D formats) (2010).
“They built the industry before they built their business,” said Denike who became one of the early product testers as a 15-year-old when he was approached by Novak and Shuirman in a skateboard park. “It was just raw entrepreneurial spirit. They took it from a fad to an actual business and, as a group, decided they were going to focus on growing the industry. If they were good businessmen, they would get a piece of that pie.”

Playwheels Disney Skateboard For Kids is a 21″ Wood single kicktail deck with painted edges.  It has clear sand spray top grip with color graphic and full-color bottom graphics with a retro shape.  It features multi-colored composite truck and baseplate components with carbon steel axles.  This is great for kids who are starting to learn skating.  It has an average rating of 4.2 on Amazon.
The Wasatch Imports Good Skateboards is the ultimate compact and complete street board that is ready-to-go. It is great for exercise and fun. It is very portable and perfect for all skill levels. It has a variety of awesome vintage color combinations that you can choose from. It is made of topline construction, with a high-density plastic deck, 59mm super smooth wheels, ABEC7 bearings, and solid aluminum trucks. It measures 22″ long and 6″ wide and weighs 4 pounds. It has a  full manufacturer’s lifetime warranty on all parts, pieces, and materials. It has a weight limit of 200 pounds which can ensure that bigger skaters can join the fun.
The criteria used to select the brands featured varies – some are included due to their commitment to technological innovation and for their efforts to improve the products they offer through experimentation, others are included for what they offer in terms of cultural depth and for their contributions to skateboarding culture as a whole, whether that be through graphics, video output or simple attitude.
×