“They built the industry before they built their business,” said Denike who became one of the early product testers as a 15-year-old when he was approached by Novak and Shuirman in a skateboard park. “It was just raw entrepreneurial spirit. They took it from a fad to an actual business and, as a group, decided they were going to focus on growing the industry. If they were good businessmen, they would get a piece of that pie.”
In summary - recognizing a real skateboard isn’t rocket science, but it does take some amount of brand awareness and ultimately even trial and error. We tried to take the guesswork out of it by starting SkateXS and openly sharing and celebrating each and every component we use to build our skateboards. Hopefully we have been able to share the values and priorities we put into those design decisions. 

TIP: Extra width and short noses make old school boards more difficult to flip or lift off the ground, so they are not ideal for street skating. With some old school boards, the truck mounting holes are drilled to only fit certain trucks, so make note of the truck pattern before you buy the deck. If you’re not sure your trucks will fit, just give us a call and we’ll figure it out. Shop Old School Compatible Trucks

Skateboards can be bought online and in your local stores.  However, choosing a good skateboard can be challenging.  If you are a beginner there are a lot of things that you have to consider.  Aside from the cost, you should also check the entire board such as the wheels, the deck, the trucks, and others.  Here, we have compiled the best skateboards for sale that you can choose from right now.


Hardware won’t have an effect on your skating. Standard 7/8 - 1 inch hardware will work for most skateboards. However, if you use riser pads, be sure that you have long enough hardware to go all the way through the deck, trucks and riser pad. If you're unsure what length of hardware you need, give one of our experts a call at 888.450.5060 and we'll be stoked to help you out.

Hi Everyone! My name is Pete (yes, I’m a real person who lives in a cornfield just outside of Buffalo, NY – well, my house is in the middle of a cornfield!). As a former collegiate athlete in Iowa, I’ve played varsity basketball, volleyball and soccer. I also happen to be an outdoor adventure fanatic who’ll do whatever it takes to never miss my annual week-long wilderness canoe trip in the Northern Ontario wilderness. Sports equipment has come a long way over just the past few years, and I’d love to share with you the latest (and most competitively priced) products that will save you many of the frustrations I’ve dealt with over the years! Please feel free to cruise the site and drop me a line on the contact page if you have ideas for improvements or anything else!

Buy a quality deck. Decks available at your local department store are usually of low quality and have pictures of cartoon characters on the bottom. If you want an entire board, but don't know exactly what you want, buy a complete skateboard from a company or go to a skate shop and ask the employee about the products. If you want to ride on the streets, get a 7.5 to 8.0 deck, if you want to ride vert, 8.0 and up is probably best. However, it's all personal preference. People street skate all the time with decks over 8.0.
Skateboard Cafe’s video releases to date include the initial Skateboard Cafe Promo (2012) featuring the original team of Harry Ogilvie, Shaun Currie, Josh Arnott, Tom Gibbs, Louis Marshall and Pat Garrahy plus associated friends. This was followed by Skateboard Cafe’s first full-length video ‘Alfresco‘ in 2015, followed by a rash of single rider and tour-based video releases since. Skateboard Cafe are also notable for conducting every aspect of their business in-house with all video, design and product sourcing undertaken by the owners, as well as using video look-books to promote each new drop of Skateboard Cafe product.
Camber & Rocker: The camber skateboards are the ones with a raised middle while rockers have dropped middle. The angle you get with camber and rocker is pretty mellow. However, the difference in shape dramatically affects the flex of your deck. Since most of the decks come with a neutral deck camber, you can still find some cruisers and longboards who feature a camber—style deck. Needless-to-say, decks having positive camber have more flex because of the higher center of gravity. In case of rocker decks, the center of gravity is low and have a sloped shape which the riders love.
The brand based in Vancouver provides skateboards featured with construction of fiberglass and bamboo, Rayne longboards assure the best skating experience you can imagine. Decks made by Rayne has the ultimate crispy flow produced from the highest quality bamboo. The boards come with unique designs that standing out with the cool personality that beats other competitors in the market.
This board also has a unique shape that makes it a lot easier to ease into turns, which is something that longboards aren’t always known for. It’s a lot easier to push off on this deck thanks to how low it sits, and you also get a one-year warranty from the manufacturer should anything go wrong. If you’ve never ridden on a board before, and don’t want to learn tricks right away, this is a great choice, especially if you’ll be riding around a lot of mostly flat areas.
Ohderii Skate Skateboards are made of a High-quality Plastic deck which will not easily break even when pressed over by a car.  It comes with 3.125″ all aluminum alloy trucks, 59mm 78A super smooth PU wheels and ABEC-7 stainless steel bearings.  It is ready to use and you can easily store it in your backpack.  It has an average rating of 4.5 on Amazon.
Sending sincere thanks to everyone that supported us over the last decade – including team riders, fans, customers, photographers, filmers, & mags. Thanks to George & Juli Powell & everyone at Skate One Corp. who believed in us & helped facilitate our vision. Thanks most of all to Cara-Beth Burnside for whom without her influence, leadership, & no-bullshit-spirit none of this would have ever been possible.
OneHype Designer Board has its own one of a kind design which is placed through a heat transfer and not a sticker. It measures 8″ W x 31″ L. It’s ready to use. It includes shock pads, durable wheels, smooth bearings, colored bushings, and aluminum trucks. The 7 ply maple deck is tough and can handle several impacts. This board is suitable for all ages.
Their fan base loves them for pushing goofy but fun looking skating that in reality is heavier and rawer than most will realize, and their board graphics and t-shirts feature art from their riders in striking colorways. Their product immediately stands out among the bunch at any shop it’s stocked. These guys are doing things exactly their way, and it’s sticking.
In 2003 Go Skateboarding Day was founded in southern California by the International Association of Skateboard Companies[53] to promote skateboarding throughout the world. It is celebrated annually on June 21 "to define skateboarding as the rebellious, creative celebration of independence it continues to be."[54][55][56][57][58] According to market research firm American Sports Data the number of skateboarders worldwide increased by more than 60 percent between 1999 and 2002—from 7.8 million to 12.5 million.[59]
The deck is expertly constructed with a vertically laminated bamboo core and bamboo veneer exterior, all attached with triaxial glass and epoxy as well as a course grip tape top. The grip tape is arranged in an unusual and stylish, yet functional, design. The 34-inch board features a 13-degree nose angle and an 18-degree tail angle. With its directional shape, you’ll easily be able to cruise on this board or pull a few tricks.

Grip tape adds additional assurance for a rider's feet. It is made from a sheet of colored paper or fabric with adhesive on one side and a fine, sand paper surface on the other. Applied to the top surface of a skateboard, grip tape gives a person's feet an improved grip while maintaining stability for performing tricks. Skateboard trucks connect both the wheels and ball bearings to the deck and are directly attached to the deck themselves. They are usually constructed from aluminum alloy. The wheels are mounted to their axles via steel bearings. The wheels are made from polyurethane and available in a range of different shapes and sizes to suit most any skill level.
Skateboards, along with other small-wheeled transportation such as in-line skates and scooters, suffer a safety problem: riders may easily be thrown from small cracks and outcroppings in pavement, especially where the cracks run across the direction of travel. Hitting such an irregularity is the major cause of falls and injuries.[102] The risk may be reduced at higher travel speeds.

Omar Salazar suffered a bad knee injury recently and was sidelined from skating, allowing him to refocus his energy into running his company, Doomsayers. Following the demise of Alien Workshop and facing an uncertain future in the industry, Omar decided to really focus on a brand whose image is not shy about its disdain for corporate greed, which many people blame for the demise of his long time sponsor.
In 1975 skateboarding had risen back in popularity enough to have one of the largest skateboarding competitions since the 1960s, the Del Mar National Championships, which is said to have had up to 500 competitors. The competition lasted two days and was sponsored by Bahne Skateboards & Cadillac Wheels. While the main event was won by freestyle spinning skate legend Russ Howell,[30][31] a local skate team from Santa Monica, California, the Zephyr team, ushered in a new era of surfer style skateboarding during the competition that would have a lasting impact on skateboarding's history. With a team of 12, including skating legends such as Jay Adams, Tony Alva, Peggy Oki & Stacy Peralta, they brought a new progressive style of skateboarding to the event, based on the style of Hawaiian surfers Larry Bertlemann, Buttons Kaluhiokalani and Mark Liddell.[32] Craig Stecyk, a photo journalist for Skateboarder Magazine, wrote about and photographed the team, along with Glen E. Friedman, and shortly afterwards ran a series on the team called the Dogtown articles, which eventually immortalized the Zephyr skateboard team. The team became known as the Z-Boys and would go on to become one of the most influential teams in skateboarding's history.[27][33][34]

FTC has grown from being the staple skate shop of the Bay Area to being a respected brand pushing skateboarding across the globe. Their SF flagship sits in the famous Haight Ashburry district, always attracting visitors and giving them a look into what skateboarding is really like in this day and age. FTC will have you covered in their own gear, and will also always be pushing the next big thing in their shops, and they never make a bad call.
Skateboarding has also become a major source of inspiration for high-end fashion brands, as they design their own interpretations of the skate culture and style from graphic T-shirts, five-panel hats, cropped, wide-leg pants, and skateboarding sneakers from the brands like Vans. But there’s no faking the original, and the brands that do it best are the ones that have a long-time heritage in the sport of the board, unlike the luxury labels simply trying to capitalize on the look.
The World Industries logo used to be the marker of a diehard skater, but recently it's gotten into the children's skateboard market too. Because of the brand's long history and trusted reputation in the skateboard community at large, the boards are generally good quality. However, remember that the brand usually caters to hardcore skaters; some parents may not approve of some of the brand's imagery. 
For those of you who don't know, Mark Gonzales isn't just an artist who occasionally pens logos for Supreme. He's a bonafide legend, as an artist, a skater, and a personality. His brand Krooked is a perfect expression of that, with art direction from the man himself, and a videography of skate flicks that includes essential viewing Gnar Gnar, Kronichles, and Naughty. Supreme may top Krooked on this list, but true Gonz stans will always represent with Krooked.
Skateboards can be bought online and in your local stores.  However, choosing a good skateboard can be challenging.  If you are a beginner there are a lot of things that you have to consider.  Aside from the cost, you should also check the entire board such as the wheels, the deck, the trucks, and others.  Here, we have compiled the best skateboards for sale that you can choose from right now.
Harsh weather, cracked pavement, angry cops—all things that make Raw New England just so raw. The name is also an acronym for Ready Amongst Willing—a perfect moniker for one of the East Coast's toughest brands. Raw's product drops aren't quite as frequent or bountiful as some other brands on this list, but the decks, tees, hoodies, and caps with the bold RAW logo are must-haves for New England's skate crowd. Visit the brand's shops in Boston or in CT to get the goods in person.
SkateXS has been widely known to be the best brand for kids that are looking to advance their skateboarding skills. These skateboards have been designed with children in mind. That’s why there are many customizable features that you can pick when purchasing this product. If you are an avid skateboarder and want to introduce your kids to skateboarding, or just a parent that has been hearing about skateboards for weeks now, you can safely pick this product by SkateXs to help your kids safely advance in their skateboarding skills.
That’s a lot of wood! But it is by no means the end. In 2016 there were many other brands that have pleased us with wooden works of art. Chocolate were inspired by modern living shown in their Modern Homes series, Welcome beautifully presented decks in original shapes, and the two German brands Inpeddo and Mob showed that seven layers do not necessarily have to come from overseas.

Aside from their prodigious online output since the release of their last full-length video, (often via Daewon Song’s own Instagram account which currently has close to a million followers alone), Almost are also renowned for their experiments in board construction technology – in particular the Almost Impact Support range and the Über Light series which incorporate carbon-fibre into skateboard construction to reduce weight and increase strength/flex.
×