Mini Cruisers have exploded in popularity in recent years. These short and skinny boards may not have the versatility of a standard skateboard, allowing for a full range of tricks and travel, but they are ideal for urban and college living where space for storage and riding are both minimal. If you want to ride a mini-cruiser, but you hate the plastic decks or you want to build your own, check out the Bamboo Skateboard mini cruiser deck.

Hardware won’t have an effect on your skating. Standard 7/8 - 1 inch hardware will work for most skateboards. However, if you use riser pads, be sure that you have long enough hardware to go all the way through the deck, trucks and riser pad. If you're unsure what length of hardware you need, give one of our experts a call at 888.450.5060 and we'll be stoked to help you out.
The DreadXBoards Concave Skateboard has Plastic Deck Injection Molded for excellent durability. It features Urethane Wheels 59mm 78a, aluminum trucks, and Abec 7 Bearings. It is completely assembled and is ready to ride. It is perfect for beginners or experienced riders. It can load up to 185 lbs. It is great for kids and adults. It has an excellent rating of 4 on Amazon.
Decks come in a variety of shapes and sizes. You can choose a mini-board, a cruiser, a drop-through, or a standard deck for your favorite set of wheels and hardware. Widths range too from a few inches with a 22-inch board to the wide size of a true cruiser. Some decks are flat as possible while others are significantly concave for optimized turning. You can buy a deck with artwork and grip tape already attached for a quick install or you can get a bare-bones wooden deck to truly customize.
Decks come in a variety of shapes and sizes. You can choose a mini-board, a cruiser, a drop-through, or a standard deck for your favorite set of wheels and hardware. Widths range too from a few inches with a 22-inch board to the wide size of a true cruiser. Some decks are flat as possible while others are significantly concave for optimized turning. You can buy a deck with artwork and grip tape already attached for a quick install or you can get a bare-bones wooden deck to truly customize.

Modern decks are made with a composite of thin layers of either maple or bamboo pressed into a near symmetrical shape with a nose equal to or longer than the tail. The deck should be concave (subtle U shape) along the whole board with both the nose and tail angled upwards (the "kick" of the board). Conceptually while the skateboard is a platform, it also serves to cup the balls of the skater’s feet with rising sides, nose and tail providing the foundation for pretty much all modern skateboard tricks.

Many cities also began implementing recreation plans and statutes during this time period, as part of their vision for local parks and communities to make public lands more available, in particular, for skateboarding, inviting skateboarders to come in off of the city streets and into organized skateboarding activity areas. By 2006 there were over 2,400 skateparks worldwide and the design of skateparks themselves had made a transition, as skaters turned designers.[43][60][61][62][63] Many new places to skateboard designed specifically for street skaters, such as the "Safe Spot Skate Spot" program, first initiated by professional skateboarder Rob Dyrdek throughout many cities, allowed for the creation of smaller alternative safe skate plazas to be built at a lower cost.[64] One of the largest locations ever built to skateboard in the world, SMP Skatepark in China, at 12,000 square meters in size, was built complete with a 5,000-seat stadium.[65]
Best cruiser skateboards include large wheels, since they offer you both stability and speed. They usually have much softer wheels than the regular skateboards you use for doing skateboard tricks and ollies. A good beginner cruise skateboard for beginners can be the La Sports Retro board. It has a simple design and is surrounded by 5-star reviews all around! Many customers report it feeling sturdy and firm, while going at very good speeds.

Bianca Chandôn’s offerings can be found in high-end shops like Trés Bien and Supply, while Call Me 917, the sister company focusing on producing skateboards and hosting a skate team can be found mostly at select skate shops, such as New York’s own Labor Skateshop, but is also stocked at elite retailers like Dover Street Market. This brand duality allows Olson the freedom to explore new fields like cut-and-sew and womenswear with Bianca, while staying true to skateboarding with Call Me 917.
What began life as a screen-printing business back in 2001 has organically morphed into one of the UK’s most celebrated low-key bedroom brands. After completing a screen-printing and fine arts degree Stuart Smith set up Lovenskate to offer bespoke screen printing services to the skateboard industry and beyond from inside his parents garage. Over time, Lovenskate grew and formally metamorphosed into a skateboard brand back in 2001.
Flip Skateboards is a high-level skateboards company that moved from the UK to California to take advantage of the American skateboarding industry. It was launched in 1991 by Jeremy Fox and by professional skateboarder Geoff Rowley, both of whom are from the UK. They both knew that to achieve the highest levels as a skateboarding company it was important to gain the recognition one can only get in the U.S. Furthermore, in 2017, Flip partnered with the European skateboard production and distribution company HLC. The decks of Flip Skateboards are made from 7-ply maple. Customers can enjoy the standard decks as well as the P2 models which are made with an oval-shaped fiber reinforcement panel which makes them extra durable. Psychedelic designs adorned many of the Flip skateboards as well as other designs. The Flip team has 15 professional skateboarders, including names such as Tom Penny, David Gonzalez, and Luan Oliveira.
Now you need to look at the wheels of your skateboard. There are dozens of different sizes, materials, shapes, and features of skateboard wheels, and it can get confusing for beginners. The most common type of wheel is a hard plastic wheel, and for beginners, you’ll usually see a “90a” level wheel. Professional skaters often choose even harder wheels, up to a 100a, because it gives them more “pop” for tricks. But somewhere between a 90a and a 97a is usually best for beginners.
Isle is much newer to the game than a lot of the other brands mentioned on the list, but that doesn’t mean they don’t deserve the same respect. Drawn straight from the mind of skateboarder Nick Jensen, a London native with the eye of a true artist, Isle’s graphics could just as easily be hanging in a museum rather than in skate shops. Jensen’s creative process involves him sculpting, painting and photographing every board graphic himself in his own studio, manipulating each art piece to work as a graphic. Isle offers one of the most well developed brand images in skateboarding, due in big part to the fact that it is literally an outlet of one man’s own rampant creativity.
Keep in mind that the deck width will also affect the size of the trucks that you use. You’ll need wider trucks to make a wider deck more stable. If you see a wide deck with narrow trucks, you can expect the ride to be wobbly and hard to manage. Pay attention to the bushings on the board as well. If the bushings are very firm, you’ll have a more stable ride, but it also makes it harder to turn. Soft bushings are much more responsive, but you do lose a little bit of stability. If you don’t know if your bushings are firm or soft, you likely have soft bushings, since this is the default.
James Haden is one of the owners of the Skateboarder community, together with Nash Gibson – his co-owner. He works as a full-time copywriter for a private company and also a true adventurer. He is an avid reader, writer, traveler, and extreme sports junkie. During his free time, he researches interesting content for their blog and continuously writes for their audience.
Many musicians, painters and designers have explored their potentials through skateboarding. When you skate, your inner talents come out in many ways. Painters paint their decks with artistic sceneries and musicians sing while they are deeply involved in cruising through the smooth roads. People with graphic designing and photography passion bring out their skills by taking an incredible picture while skateboarding and edit them beautifully. Skateboarding no doubt polishes your skills!

LaderaSkateboards.com is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com. Amazon, the Amazon logo, AmazonSupply, and the AmazonSupply logo are trademarks of Amazon.com, Inc. or its affiliates. Additionally, LaderaSkateboards.com participates in various other affiliate programs, and we sometimes get a commission through purchases made through our links. We do not specifically market to children under 13.
In the early 1970s skateparks hadn't been invented yet, so skateboarders would flock and skateboard in such urban places as The Escondido reservoir in San Diego, California. Skateboarding magazine would publish the location and Skateboarders made up nicknames for each location such as the Tea Bowl, the Fruit Bowl, Bellagio, the Rabbit Hole, Bird Bath, the Egg Bowl, Upland Pool and the Sewer Slide. Some of the development concepts in the terrain of skateparks were actually taken from the Escondido reservoir.[27][28][29] Many companies started to manufacture trucks (axles) specially designed for skateboarding, reached in 1976 by Tracker Trucks. As the equipment became more maneuverable, the decks started to get wider, reaching widths of 10 inches (250 mm) and over, thus giving the skateboarder even more control. A banana board is a skinny, flexible skateboard made of polypropylene with ribs on the underside for structural support. These were very popular during the mid-1970s and were available in a myriad of colors, bright yellow probably being the most memorable, hence the name.
The best criticism you could make about skateboarding in general right now is that it takes itself too seriously. Rightfully so. Skateboarders are often under attack, and what they do is illegal in most places. Skate culture is constantly being ripped off and bastardized. That's why it's so important to have a healthy sense of humor about it all, and that's why it's important that skateboarding has Roger.
To help you decide what designs you like most, we included various patterns and printings in our review section. From cherry blossoms to fiery dragons, from checkered boxes to padded pugs, there is a lot to explore. You have to remember that you will be using this skateboard for years/months to come. Therefore, it’s important to choose a design that you think is cool, not a design that will look cool to others!
A skateboard consists of a deck, trucks, wheels, bearings, hardware, and griptape. All parts come in a variety of sizes, graphics, colors, and signature pro series. The deck is the essential part of any skateboard. The deck ranges generally from 7.5" to 8.5". Skaters choose their board size for many reasons, but the basic deciding factor comes down to style of skating and foot size. Transition skaters usually ride a wider deck, while street skaters tend to go with a smaller deck. Skate brands such as Girl, enjoi, and Welcome offer a wide range of boards in regards to sizes and graphics. Skateboard trucks come in either a high or low setting, and also in a range of widths. The main factors in a truck, are how well they turn, and how well they grind. Independent, Venture, and Thunder, are truck brands that are well known for their turning and grinding capabilities. The skate hardware is generally either Phillips head or Allen key bolts. The skateboard wheels range from 50mm to 60mm. Some brands offer smaller and larger sizes, but 50-60mm is the general range. Like the deck sizes, wheel sizes depend on the skater's choice of terrain: Transition skaters tend to ride bigger wheels, while street skaters usually go with smaller wheels. Bones, Spitfire, Ricta, and Wayward wheel companies all make wheels for any terrain, whether you're a street shredder or a park burner. Skate bearings follow the ABEC rating system, which includes grades 1, 3, 5, 7, and 9. Bones, Bronson, and Andale are some of the top bearing brands in the skate market. CCS proudly carries all these brands, and many more.

Moving on to our favorite pick from the Plan B series, Plan B Skateboard Complete Felipe Victory 7.6″ Tensor Assembled, suitable for all kinds of riders, but is an ideal skateboard for intermediate skateboard riders. The deck is made from 100% North American maple and measures 7,6 inches. Its wheels are 52mm TGM wheels which means it is excellent for both street and park skating. We also love its lightweight trucks and heavy-duty aluminium with grade 8 steel kingpins and axles plus the bushings (USA made) and pivot cups. The bearings are rated 5 on the ABEC scale.
We love Powell Peralta for a number of reasons as do all its customers but the foremost reason being its variety in terms of the skateboards that it manufactures. It has a collection of 30 different skateboard models, with a fusion of unique graphics and colors. They offer different skateboards that you can choose from, depending on your riding style, budget, body fitness and riding style.

Distributed by NHS, Inc., Creature Skateboards was launched in 1994 by professional skateboarders Russ Pope, Jason Adams, Barket Barrett and Darren Navarrette. The company was revived in the mid-2000s. Creature is known for its horror themes on its skateboards and clothing. The company offers complete skateboards that include the decks, wheels, trucks, and bearings as well as customizable decks, and accessories. The Creature team includes 19 professional skateboarders. In addition to Navarrette, the roster includes such names as Al Partanen, Chris Russell, Cory Juneau and David Gravette.


Certain cities still oppose the building of skate parks in their neighborhoods, for fear of increased crime and drugs in the area. The rift between the old image of skateboarding and a newer one is quite visible: magazines such as Thrasher portray skateboarding as dirty, rebellious, and still firmly tied to punk, while other publications, Transworld Skateboarding as an example, paint a more diverse and controlled picture of skateboarding. As more professional skaters use hip hop, reggae, or hard rock music accompaniment in their videos, many urban youths, hip-hop fans, reggae fans, and hard rock fans are also drawn to skateboarding, further diluting the sport's punk image.


Their fan base loves them for pushing goofy but fun looking skating that in reality is heavier and rawer than most will realize, and their board graphics and t-shirts feature art from their riders in striking colorways. Their product immediately stands out among the bunch at any shop it’s stocked. These guys are doing things exactly their way, and it’s sticking.
Peralta put together the Powell skate team under the Bones Brigade moniker, employed the services of photographer, artist and visionary C R Stecyk III and was the talent scout responsible for bringing skaters such as Tony Hawk, Rodney Mullen, Lance Mountain, Mike Vallely, Guy Mariano, Tommy Guerreo and inventor of the ollie Alan ‘Ollie’ Gelfand, (amongst many others) to the attention of the global skateboard community.
Launched in 1991 by professional skateboarder Mike Ternasky who was killed in a car accident in 1994, Plan B Skateboards was renewed in 2005 by professional skateboarders Danny Way and Colin McKay. The top Skateboards brand, recognized by its unique logo, offers customization, but it also produces skateboards that come already assembled and ready for immediate action with everything a skateboarder needs including the deck, wheels, trucks, and bearings. The decks are made with a durable and thick seven-ply maple. They are also designed for you to make them uniquely yours with cool graphics that reveal your personality. In addition to the decks, Plan B also produces wheels, toolkits, and the kind of hip clothing that every skateboarder wants to be seen wearing. In addition to Way and McKay, the Plan B team consists of pro skateboarders PJ Ladd, Chris Cole, Pat Duffy, Ryan Sheckler, Torey Pudwill, Leticia Bufoni, Chris Joslin, Felipe Gustavo and Sean Sheffey.
Let’s now move on to our top pick from the Punisher line, the Punisher Cherry Blossom Complete skateboard (31 inch). Hands down, the Punisher Cherry Blossom skateboard is the best skateboard for girls. And I am not just saying this because the cherry design would look best for girls, it has some incredible features and specifications. We love the 9-ply stiff maple deck with a beautiful cherry design. The deck is also covered with coarse grip tape which gives the skateboard excellent grip and it makes it a good ride for girls too.
It was a slow start for 3D, who had Alex Olson bail on them when they first started out before they could even get their first run of boards inside of shops, leaving the company at just two riders: Brian Anderson and Austyn Gillette. Now, due at least partially in part to Brian Anderson’s solidified status as a skateboarding legend, 3D has taken off and become an established brand that’s not taking itself too seriously, but still putting on for skateboarding. 3Ds first video offering, featuring amateur rider Tom Karangolov in a dreamy pink colorcast world, has even showed that they’re looking to shake things up in the stale footage side of skateboarding.
Following Jason Dill and AVE leaving long time sponsors Alien Workshop back in 2013, Dill’s 13-year-old Fucking Awesome brand, which was formerly a clothing brand, became a board brand and began to add riders such as Dylan Rieder (RIP), Gino Iannucci, Jason Dill, Kevin Bradley, Nakel Smith, Sean Pablo, Sage Elsesser, Tyshawn Jones and Aiden Mackey.
×