Pro decks are what most people are familiar with and what is seen most commonly around skateparks and driveways around the US. These decks can have a variety of different logos and images on them and sometimes are a specific professional skater’s pro deck. Pro decks provide skaters a way to support their favorite riders and have the same equipment they see all their favorite pros using. The quality of professional decks and parts are almost always very high as they have a reputable and brand image to uphold. For this higher level of quality and you can expect to pay 2-3x the cost of a blank complete. If you want to save some money and still have a pro look, there are options available that have generic blank parts with a pro deck. This may be a good option for a beginner skater who is not yet doing complex tricks that may break these cheaper parts, but they still want the look and feel of a pro skateboard. As the skater progresses they can then switch out these generic parts for higher-end options as necessary.
If you are looking to buy a reliable skateboard that will keep you busy for years to come, the Whitey Panda is the ideal choice. It’s a very good entry-level skateboard that can be put through a lot of wear and tear. The solid, metal skateboard trucks ensure that you will be kept sturdy and safe both on and off the ground. This helps the rider feels more confident when doing tricks, no matter where they are.
In the early 1970s skateparks hadn't been invented yet, so skateboarders would flock and skateboard in such urban places as The Escondido reservoir in San Diego, California. Skateboarding magazine would publish the location and Skateboarders made up nicknames for each location such as the Tea Bowl, the Fruit Bowl, Bellagio, the Rabbit Hole, Bird Bath, the Egg Bowl, Upland Pool and the Sewer Slide. Some of the development concepts in the terrain of skateparks were actually taken from the Escondido reservoir. Many companies started to manufacture trucks (axles) specially designed for skateboarding, reached in 1976 by Tracker Trucks. As the equipment became more maneuverable, the decks started to get wider, reaching widths of 10 inches (250 mm) and over, thus giving the skateboarder even more control. A banana board is a skinny, flexible skateboard made of polypropylene with ribs on the underside for structural support. These were very popular during the mid-1970s and were available in a myriad of colors, bright yellow probably being the most memorable, hence the name.
The logo is the powerful icon that represents the company's legacy, while graphic styles tend to ebb and flow. Just as skateboarding has evolved and changed over the decades, the skateboard logo has as well, for better and for worse. Picking out the top 50 logos in skateboarding isn't an easy task. Do you separate the logo from the company and base it on visual appeal? I think that's impossible given the nature of skating. Ultimately, these are logos from companies that built the landscape of skateboarding from the ground up. So you have to take into consideration the impact of the brand as well as the logo it represents. If a logo has personal importance to you, then that's all that matters. My list is only one opinion and forged from jumping into skateboarding in 1984.
Skateboarding is the best and worst thing that’ll you’ll ever have the pleasure of tearing your hair out over. In a typical day of skating, you’ll get hurt, you’ll get incredibly frustrated, and eventually land a trick that’ll make it all worth it - if you’re lucky. Choosing a skateboard is fairly simple if you know what shape and width you like. If you’ve been skating awhile, you’re probably fairly familiar with what board brands you like skating. If not, there are a number of resources to help you choose the best skateboard for your skating style. Continuing to read this little spiel is going to take the least amount of effort on your part.
Hanna-Barbera, DC Comics and Todd Francis – at Almost, childhood dreams come true. But on the top sheet, however, is no place for childishness: Willow, Haslam, Song, Mullen and Co. are ripping it on these decks and can hardly be surpassed in ability. To provide the needed strength for the guys Almost has invented the innovative Impact Technology. The two lost places are a minor matter because Almost makes their own thing anyway. Up to 8 layers are available from 62.99 € | 55.00 GBP!
Founded by the pro skateboarder Marc Johnson in the year 2000, enjoi has been on the market for over two decades now. They have since expanded, and started producing skateboarding accessories and clothing apart from just skateboards. Since then, they have adopted a panda as their logo. This logo is featured on most of their products and has quickly become the company’s trademark.
It was a slow start for 3D, who had Alex Olson bail on them when they first started out before they could even get their first run of boards inside of shops, leaving the company at just two riders: Brian Anderson and Austyn Gillette. Now, due at least partially in part to Brian Anderson’s solidified status as a skateboarding legend, 3D has taken off and become an established brand that’s not taking itself too seriously, but still putting on for skateboarding. 3Ds first video offering, featuring amateur rider Tom Karangolov in a dreamy pink colorcast world, has even showed that they’re looking to shake things up in the stale footage side of skateboarding.
However, the Golden Dragon does have pretty soft trucks bushings, which means the board will lean very easily and be more responsive to weight distribution. This is good news for more intermediate skaters who want easy turns, but not necessarily great for those who are still learning and may not be familiar with controlling a board. But for the price, and considering the great durability of all the other components, this is a quality choice.
The problem with wheel bite is that it tends to stop the motion of the wheels. This can result not only in a bad wipeout for the rider but also damage to the wheels. With the help of the riser pads, it is easier for you to preserve the deck of your skateboard since these pads can reduce the tendency of having stress cracks on where the trucks and deck meet.
Their fan base loves them for pushing goofy but fun looking skating that in reality is heavier and rawer than most will realize, and their board graphics and t-shirts feature art from their riders in striking colorways. Their product immediately stands out among the bunch at any shop it’s stocked. These guys are doing things exactly their way, and it’s sticking.
Another bonus of shopping at an actual skate shop is that you get to see what the boards look like in person. Most skate shops will have a cool wall of boards, and it's fun to just stand there and look at all the graphics. If one jumps out and grabs you, then you can ask the shop owner about the brand, and whether it's a good one. There's nothing wrong at all with buying a skateboard deck because you like the graphics!
Buy a quality deck. Decks available at your local department store are usually of low quality and have pictures of cartoon characters on the bottom. If you want an entire board, but don't know exactly what you want, buy a complete skateboard from a company or go to a skate shop and ask the employee about the products. If you want to ride on the streets, get a 7.5 to 8.0 deck, if you want to ride vert, 8.0 and up is probably best. However, it's all personal preference. People street skate all the time with decks over 8.0.
Jessup is considered to be the standard grip tape, and it is the grip we offer for free with all decks. MOB is known for their coarser grip, which gives excellent traction, but also wears down your shoes faster. MOB M-80, Grizzly and Shake Junt grip tapes fall somewhere in the middle, offering good overall traction without the heavy abrasion. There are other extra course grip options for downhill skateboarding (Vicious, Blood Orange, etc.). That stuff locks your foot in place but it is so coarse it would quickly destroy your shoes if you tried flip tricks with it.
Bearings are standardized to fit in all kinds of skateboard wheels. All bearings will eventually get dirt and gunk in them which slows you down. Regular cleaning is recommended. Higher quality bearings will perform better, roll faster, retain more speed, and last longer when cleaned regularly. Some bearings come with bearing spacers or have spacers built into the bearing. These will fit in any wheel, but are not necessary for most types of skateboarding or longboarding.
In summary - recognizing a real skateboard isn’t rocket science, but it does take some amount of brand awareness and ultimately even trial and error. We tried to take the guesswork out of it by starting SkateXS and openly sharing and celebrating each and every component we use to build our skateboards. Hopefully we have been able to share the values and priorities we put into those design decisions.
Since its inception in 1990, Alien Workshop has gone through a number of changes of ownership, first being bought by Burton Snowboards in February 2008, then purchased from Burton by original Alien Workshop rider and reality TV show star Rob Dyrdek in January 2012. Following Dyrdek’s purchase of the brand and its umbrella company DNA Distribution, (also incorporating Habitat skateboards, Habitat footwear and Reflex bearings), an announcement was made in October of 2013 that Dyrdek would remain as a minority shareholder of DNA Dist, with the majority of shares purchased by Pacific Vector Holdings, (also owners of No Fear clothing and Gatorz sunglasses).