Punked Skateboards is one of the top selling skateboard brands. With their innovative designs, quality boards and a variety of longboards and skateboards, Punked has taken all of the skateboard companies in the world by storm. Their brand has created a variety of boards for beginners, intermediates and even pros, so that they always have the right skateboard for you.
A “razor tail” is the term for when the tail of the skateboard deck becomes sharpened and worn due regular use and scraping the tail of your skateboard on the ground to stop. When your deck gets razor tail, its becomes a weapon against you and anyone need you while you’re skating as being hit with a sharpened tail is very painful. To avoid this from happening, you could buy a carbon fiber deck that may be more resistant to wear, but more importantly you should not scrape your tail to stop. Instead you can lightly place one foot or toe down to slow your speed or powerslide to a stop.
It is a mini-cruiser, which is known for its strength as well as its ability to offer real value for the money you spent. This skateboard can also be expected to deliver an impressive performance – thanks to the Abec 7 skatro bearings used in it. There are also 59-mm urethane wheels and the 3-inch GOLD aluminum trucks that can help smoothen each ride.
In an industry as diverse as skateboarding, the sheer number of skateboard brands on the market can be bewildering. With a seemingly never-ending amount of new brands emerging, alongside the numerous pre-existing ones, the market can certainly appear over crowded and confusing at times, which is hopefully where this list of some of our favourite skateboard brands comes in.
Best cruiser skateboards include large wheels, since they offer you both stability and speed. They usually have much softer wheels than the regular skateboards you use for doing skateboard tricks and ollies. A good beginner cruise skateboard for beginners can be the La Sports Retro board. It has a simple design and is surrounded by 5-star reviews all around! Many customers report it feeling sturdy and firm, while going at very good speeds.
Top Skateboards come from companies such as Blind Skateboards. Professional skateboarder Mark Gonzales founded the brand and it was launched in 1989. Today, products are distributed by Dwindle Distribution. The brand is intended for serious, hardcore skateboarders. It has an emphasis and an appreciation for the graphics used for its decks. In the early 1990s, Blind Skateboards set itself apart from other skateboard brands by creating videos. Their first, directed by Spike Jonze, appeared in 1991. You can get completes at Blind that includes the decks, wheels, trucks, and bearings. The Blind Team is professional skateboarders Cody McEntire, TJ Rogers, Kevin Romar, Sewa Kroetkov, Morgan Smith, Sam Beckett, Micky Papa, Yuto Horigome, and Jason Thurtle.
Tony Hawk and Per Welinder developed the Birdhouse Projects Skateboard Company following the decline professional skateboarding saw in the late 1980’s to early 1990’s. Tony Hawk gave the Birdhouse Projects name instant notoriety and made it into one of the professional skateboard brands in the world. Many skaters who have followed Hawk, have faithfully chosen a birdhouse skateboard. Birdhouse grabs the third place spot with their boards that are built to last and also provide maneuverability and for being a top rated skateboard brand.
Blank decks have no graphic on them and are typically priced very reasonably. Blank decks are usually colored a solid color or may even be made of unpainted wood. Historically blank decks have gotten a bad reputation for poor quality, however, there are a few brands of blanks today that are very similar in quality to pro boards and much more affordable. The downside to buying a blank complete with all blank parts is the lack of style and customization when compared to a pro deck. Also, blank skateboards may vary in quality from batch to batch, so it may be hard to find the same blank skateboard if you want to buy another one. Overall, blank skateboards can be a solid option if you have a tight budget and the person you are buying for doesn’t really care about the logo and brand.
These films have helped improve the reputation of skateboarding youth, depicting individuals of this subculture as having a positive outlook on life, prone to poking harmless fun at each other, and engaging in healthy sportsman's competition. According to the film, lack of respect, egotism and hostility towards fellow skateboarders is generally frowned upon, albeit each of the characters (and as such, proxies of the "stereotypical" skateboarder) have a firm disrespect for authority and for rules in general. Gleaming the Cube, a 1989 movie starring Christian Slater as a skateboarding teen investigating the death of his adopted Vietnamese brother, was somewhat of an iconic landmark to the skateboarding genre of the era. Many well-known skaters had cameos in the film, including Tony Hawk and Rodney Mullen, where Mullen served as Slater's stunt double.
I rode for them as a ‘Amateur’ skateboarder in ‘79-’80, and they, at that time, had one of the Best boards out on the market, made of Fiberglass in a torsion box, with a foam core, and urethane ‘bumpers’ all around. I still have that board, and one set of C-70 Reds from then. I skated that gear hard, for many years, too. I still own 6–7 full sets of “krypto’s” for skateboards, and 8 that’re on quad-roller-skates. Great wheels, and they’re still in use.
The board itself is actually very portable in the sense that it only weighs a modest four pounds. Which means you can jump on and off in any situation that may warrant you to walk or ride. The ABEC7 bearings are top quality bearings and of the highest class. Also accompanying all of these fine features comes the kick-tail end of the board. This is to ensure that maneuvering and tricks can be performed with this utmost of ease.
If you decide that you don’t want to spend the money for a pro-quality complete, then this is your best bet for a completely blank skateboard. You’re just not going to find anything else with similar quality anywhere near this price range. This blank skateboard is an even 8″ with 9 layers of plywood in the deck. This makes it ideal for any beginner especially adults or children with large feet. A great option for someone on a budget or if you want to try a no-frills quality skateboard setup, before deciding if you want to invest further on a pro-style skateboard.
The Moose Blank Skateboard deck is a made with a 7-ply composition and features Canadian Maple wood. The board is 8.25 inches in length, but Moose Blank offers shorter boards as well, fitting men and women of just about any size and skill. The deck itself has a modern concave, making turning a breeze for beginners and pros. The nose and tail are particularly steep for tricks and “perfect for shredding,” says Blank Moose. Although this board is 100-percent blank, Moose Blank offers stains and dips for monochromic board designs as well. There are also Moose Blank sets for sale, which provide a set of blank decks at a discount.
Swing boarding is the activity where a skateboard deck is suspended from a pivot point above the rider which allows the rider to swing about that pivot point. The board swings in an arc which is a similar movement to riding a half pipe. The incorporation of a harness and frame allows the rider to perform turns spins all while flying though the air.
In 2015, Hockey was announced to the world as Fucking Awesome’s sister brand with the release of their first eponymous video clip ‘Hockey‘ featuring riders John Fitzgerald and Donovon Piscopo. Since that first release Hockey have added former Anti Hero rider Andrew Allen to their team, along with Ben Kadow, a move announced in their second video – Hockey II.
There are actually several types of skateboards but the most common ones are the longboard, cruiser, and carve skateboards. A longboard is usually at least 33 inches. It is a great mode of transportation and works well for cruising around. The cruiser also works well as a mode of transportation but many consider it more beneficial as it has a shorter skateboard, which promotes ease in transporting around.
There’s a bit of self-induced CONFUSION with Kryptonics inc. When they first came out, they made, literally, a Revolutionary Wheel, one that BOUNCED. That resilience made them VERY Fast on rougher surfaces, and perhaps even stickier (for a given hardness) than other wheels. You can buy that type of wheel (as a ‘Re-Issue’ “C-Series” in 55,60,65,70+75 mm sizes) now, and it’s STILL HIGH QUALITY, FAST, + STICKY! Even by today’s ‘longboard Race’ criteria, these are wheels to be reckoned with.
The wheelbase of a skateboard deck is the distance between the centers of the inner most truck mounting holes. This distance ranges between 13.5 to 16 inches and is generally proportional to the deck length on standard popsicle decks. Some specially shaped boards and cruiser decks have differing length/wheelbase ratios. Wheelbase can impact stability and turning radius, but the effect is often subtle and not a major concern for a beginner.
No longer number one but still quite close: EMillion SkateboArts land on the second place this year, which is more than respectable regarding the competition. The Bavarian brand stands for quality, artistic designs and a motivated team, which is also represented by skatedeluxe team rider Ben Dillinger. EMillion decks are available from 49.99 € | 40.00 GBP!
If what you want out of your first skateboard is something very stable to just get the feel of riding without the danger, the Atom Drop Deck is perfect. This is a longboard, meaning it’s perfect for longer rides and cruising around. The components are made to handle lots of wear and tear, and the low-ride deck makes you feel more in control, closer to the ground, and more stable.
You can get a lot of advice (and maybe too many opinions) from fellow skaters. Some of it might not be as informed or educated as a shop owner's (and some might be flat-out bad advice), but it should at least be sincere! If you don't have a local skate park, or are too uncomfortable to walk up to people and ask, you can also ask around on a skateboarding forum. People there will be more than happy to tell you what they think about deck brands.
Ever notice small vertical or horizontal cracks through your grip tape or by the hardware of your trucks? These are called stress or pressure cracks and are basically mini fractures of your skateboard deck that typically are seen in the areas of the deck that withstand the greatest impact (around the trucks). A few pressure cracks is generally no big deal and you won’t even notice them while skating, but they can compound and grow larger and make your deck lose “pop” and increase the chance of snapping. To avoid pressure cracks, you cant use riser pads underneath your trucks to reduce the level of impact your deck takes. You should also avoid over tightening your hardware and storing your skateboard in a very humid place as both of these practices can also make your board weaker and more susceptible to pressure cracks.
Habitat proved itself as an established power in skateboarding when it survived the downfall of the parent company that owned and killed Alien Workshop, being able to persevere and even name new pros through the whole restructuring. They moved their products under Tum Yeto Collective, the parent company/distribution house of other powerhouse skateboard brands like Toy Machine, and now it’s as if they were never in any danger. If you have any doubts about why Habitat is on this list, just watch Mark Suciu’s part in Search The Horizon and never question it again.
Bianca Chandôn’s offerings can be found in high-end shops like Trés Bien and Supply, while Call Me 917, the sister company focusing on producing skateboards and hosting a skate team can be found mostly at select skate shops, such as New York’s own Labor Skateshop, but is also stocked at elite retailers like Dover Street Market. This brand duality allows Olson the freedom to explore new fields like cut-and-sew and womenswear with Bianca, while staying true to skateboarding with Call Me 917.
Despite what many young skaters may think, there is more to choosing a skateboard deck than the graphic on the bottom of the pro skater the deck company sponsors. The best skateboard deck varies from person to person depending on external factors such as the rider’s weight, skate style, shoe size, and budget. Person preferences can also impact the decision. For example, you may want to support your favorite pro skateboarder, so you buy their pro deck.
The Bamboo Skateboards Galaxy Series Cosmic Cloud Skateboard Deck is an excellent option. This concave board is made exclusively of a bamboo hybrid, rather than pure maple. This means the deck is lighter, stronger, more flexible, and can even absorb shock better. The non-carbonized, light-wood deck is made of 6-ply wood and is in its fourth generation of designs.
You guys still hype the brand from southern Germany which is why EMillion took their place in our top skateboard decks ranking again this year. Next to the brand, EMillion & skatedeluxe team rider Ben Dillinger proves that skateboarding is no stranger to our latitudes. EMillion skateboard decks are available at skatedeluxe from 49.99 EUR | 40.00 GBP.
When you’re searching for one of the best decks on the market, it’s important to not go overboard. You don’t need one that is made from the rarest wood or that has the most unique design. The best boards may be the ones that balance cost, design, and quality. After all, with healthy use, you’ll eventually have to replace your deck anyway. You want the one that will give you the most functionality and enjoyment while you use it.
Element is of the most mainstream brands in the industry today that has sponsored legends like Nyjah Huston and Bam Margera. There are many pro decks to choose from with some amazing tribal designs and they have introduced a “featherlight” technology that allows Element to have some of the lightest boards on the market today. Some may call Element “too mainstream” or “sellouts”, but at the end of the day, they produce quality products in a variety of artistic designs.
Alex Olson’s Bianca Chandôn has quickly blurred and crossed back and forth between the line that currently divides high fashion and skateboarding, pushing an androgynous aesthetic inspired by looks found in Tom Bianchi’s Polaroid book Fire Island Pines, which nobody was ready for. Olson has turned what started off as an idea for a small board brand into a hype machine that has become a hit across the world.
Welcome is doing everything the way that people would probably tell you not to when it comes to how they run their board company. With no real full-length project out since it became a company, and with no pros to name, but boasting a full roster of official riders, Welcome is as unorthodox of a skate company as it gets. They don’t even make a single board in the traditional popsicle shape most boards are made today.
Here's a list of the best skateboard truck brands (read about Trucks in the Skateboard Dictionary). Trucks can be expensive, and picking out the right set of skate trucks can seem tough. But, if you get a pair of trucks off of this list, you should be good. There are other brands that are good quality too, but each of these brands has something that helps it to really stand out. These aren't put in any particular order.
That’s a lot of wood! But it is by no means the end. In 2016 there were many other brands that have pleased us with wooden works of art. Chocolate were inspired by modern living shown in their Modern Homes series, Welcome beautifully presented decks in original shapes, and the two German brands Inpeddo and Mob showed that seven layers do not necessarily have to come from overseas.
Buying a complete skateboard from a good brand is when you purchase an already put together board that comes with a deck, the tape already applied, the wheels, the trucks, and the bearings all screwed in. You can also make custom requirements for your complete skateboard like interchanging different trucks or bearings to better fit your own personal style of skating.
It's really hard to continue with a small girls’ board brand when so many companies are now interested in the women's market. We feel like it's the right time to close down the brand and move on to the next chapter. Thanks to George and Juli Powell as well as Michael Furukawa for their vision and support of the brand and our mission over the last decade. Thanks to those who bought our products, our team riders, media, and to those that believed in what we were doing from the very beginning. I also want to thank Mimi Knoop who wore multiple hats over the years and was responsible for making hoopla a brand that was respected, legitimate, and one that we were proud to be a part of.
In 2003 Go Skateboarding Day was founded in southern California by the International Association of Skateboard Companies to promote skateboarding throughout the world. It is celebrated annually on June 21 "to define skateboarding as the rebellious, creative celebration of independence it continues to be." According to market research firm American Sports Data the number of skateboarders worldwide increased by more than 60 percent between 1999 and 2002—from 7.8 million to 12.5 million.
The brand directs their concentration on towards freerides, carves, and downhill rides for all levels. Rayne offers one-offs and protos in their sales. The boards from Rayne in our observation can ride with double kicks, pushers, dancers and cruisers. You can entrust in the authenticity and progression of Rayne since their foundation dated back in 2004 and has not failed any of their fans.
As the name implies, pro skateboard decks are decks made by well-known skateboard brands that typically feature graphics or logos related to a specific team rider. Usually, pro decks are more expensive than team decks of the brand and much more expensive than blank decks. The increased cost goes to the pro skater and it’s a way for the buyer to support their favorite skaters and brands. Pro street decks are almost always Canadian maple, besides a few carbon fiber exceptions and they are the most commonly purchased decks see in skateparks and on the streets worldwide.
“As far as the actual look of the vast majority of contemporary graphics goes, I’d say that it feels to me as if something has been lost. It’s down to what you can do with modern heat transfer printing techniques – you can literally just take a photograph from the Internet and print it identically straight onto a skateboard. Speaking personally, there’s very little to challenge you there: either from the point of view of creating graphics, or from the consumer’s perspective. Whereas back when screen-printing was the norm, every time a graphic was produced the artist was physically cutting the key line out by hand. The key line is the final black line that forms the outline of whatever it is that you’re printing and ties in all the other colours together. You can see this in the early Sean Cliver graphics for example, where it’s clear that he has hand cut the key lines as precisely as he was able to, but looked at from today’s perspective they’re not perfectly precise, which is what gives Cliver’s earliest stuff its specific look in my opinion.”