Skateboarders from all over know Santa Cruz Skateboards for its “Screaming Hand” logo, designed by legendary artist Jim Phillips, and the monstrous artwork displayed on the decks, including series styles such as their Star Wars and Marvel series. Founded in 1973 and distributed by NHS, Inc., the California based brand is the oldest continuous skateboard company in the world. Santa Cruz boards are made from 100% North American maple and they offer complete skateboards, decks, and cruiser boards. The Santa Cruz Skateboards team consists of 16 professional skateboarders including names such as Blake Johnson, Dylan Williams, Emmanuel Guzman, and Eric Dressen.

A “razor tail” is the term for when the tail of the skateboard deck becomes sharpened and worn due regular use and scraping the tail of your skateboard on the ground to stop.  When your deck gets razor tail, its becomes a weapon against you and anyone need you while you’re skating as being hit with a sharpened tail is very painful.  To avoid this from happening, you could buy a carbon fiber deck that may be more resistant to wear, but more importantly you should not scrape your tail to stop.  Instead you can lightly place one foot or toe down to slow your speed or powerslide to a stop.


What’s important to consider here is choosing the length based on your riding needs. You might be a street rider and love to do some tricks. You probably need a short board with a narrow profile. Whereas the longboard is only recommended if you are a professional skateboarded and love to cruise around the town and want to improve your balance and stability.
For example, regular skateboards are around 7.5” x 31”-8.5” x 32.5”, while skateboards for children are commonly sized 7”x28”. This ensures that young kids won’t be overwhelmed with the design of bigger skateboards from this buying guide. It also helps children ease-in into the skateboarding world, allowing them to see if it’s the right sport for them at an early age.
Prior to the mid-seventies many early skateboards were originally based upon the concept of “Sidewalk Surfing” and were tied to the surf culture, skateboards were surfboard like in appearance with little to no graphics located under the bottom of the skateboard-deck. Some of the early manufactured skateboards such as "Roller Derby", the "Duraflex Surfer" and the "Banana board" are characteristic. Some skateboards during that time were manufactured with company logo's or stickers across the top of the deck of the skateboard, as griptape was not initially used for construction. But as skateboarding progressed & evolved, and as artist began to design and add influence to the artwork of skateboards, designs and themes began to change.[92]
Mark Gonzalez created bLind Skateboards in 1989, and shortly after initiated a pro team for his skateboard brand. The bLind brand is known for higher durability due to their innovative features. The boards released by bLind are developed and marketed for hardcore skaters and top other skateboarding brands. We like that bLind goes all out providing one of the strongest boards out there, and without sacrificing the flex needed for tricks. They also do it all with a sick style and an innovative business plan that has made them one of the top skateboard brands.
In the past decade, I have begun seeing the emergence of skate decks being totally or partially made from carbon fiber or other metal materials instead of solely wood.  These decks typically last longer than regular wooden decks and aren’t prone to chipping or breaking like most made from wood.  The drawback to these materials is that they tend to feel “stiffer” than traditional wooden decks and experienced skaters may feel they are heavier and harder to do tricks on.  Carbon fiber decks are also more expensive, but this additional cost may be worth it if you tend to break decks easily.  Some brands also offer warranties against breakage under normal conditions for carbon fiber decks if you are worried about breakage.

You know how people say shit like: Ernest Hemingway is “a writer's writer” and it's not really clear what that means, but you sort of get it? Well Anti-Hero is a skater's skate brand. Founded by underground hero pro skater Julien Stranger, Anti-Hero is a direct expression of his attitude towards the skate industry, which is basically that skateboarding is life and fuck everything else. Anti-hero has a reputation for being one of the gnarliest skate brands around, thanks in part to their team of heavies which includes John Cardiel, Tony Trujillo, and Chris Pfanner.


The growth of the sport during this period can also be seen in sales figures for Makaha, which quoted $10 million worth of board sales between 1963 and 1965 (Weyland, 2002:28). By 1966 a variety of sources began to claim that skateboarding was dangerous, resulting in shops being reluctant to sell them, and parents being reluctant to buy them. In 1966 sales had dropped significantly (ibid) and Skateboarder Magazine had stopped publication. The popularity of skateboarding dropped and remained low until the early 1970s.[7][25][26]
This board is an excellent option for beginners because of its simplicity and durability. The lightly concave design allows for simple turns but doesn’t require the rider to be an excellent navigator. You can start off riding this deck down the street and use it as you learn ollies, kickflips, and how to drop in to a half pipe. It will withstand it all and look good doing it.
Keep in mind how tall you are when choosing a board width. Also consider the kind of style you wish to skate. Most technical skaters (the ones who incorporate advanced flip tricks... like Rodney Mullen) tend to favor boards between 7.5 and 7.75 regardless of how tall or small they happen to be. The upper hand of having a thin board allows for quick rotation. The other side of the spectrum is the "go big" skaters (Jamie Thomas is a classic example of a "go big" guy). Most "go big" guys favor size 8.0 and up. The advantage of a wide heavy board feels more stable under your feet while in mid air and while landing (especially those who have big feet). If your a kid you might want to just stick with a 7.66 or smaller.
Skateboarding damages urban terrain features such as curbs, benches, and ledges when skateboarders perform "grinds" and other tricks on these surfaces.[112] Private industry has responded to this problem by using skate deterrent devices, such as the Skatestopper, in efforts to prevent further damage and to reduce skateboarding on these surfaces.[112]
When you’re searching for one of the best decks on the market, it’s important to not go overboard. You don’t need one that is made from the rarest wood or that has the most unique design. The best boards may be the ones that balance cost, design, and quality. After all, with healthy use, you’ll eventually have to replace your deck anyway. You want the one that will give you the most functionality and enjoyment while you use it.
One European brand steady killing the game is France’s own Magenta. What Palace is for London, Magenta is for Paris, representing what it means to make do with skating in a place where you will literally get kicked out of everywhere just for riding on your board. With a recent collaboration with adidas, Magenta has shown they can turn their niche image into something with mass appeal, so long as the world will pay attention. Skateboarders already know the brand for their quick-footed style of skating and their unique illustration style, but they should know Magenta for their conscious effort to make sure we all are enjoying the pleasure and the freedom skateboarding brings.

A “razor tail” is the term for when the tail of the skateboard deck becomes sharpened and worn due regular use and scraping the tail of your skateboard on the ground to stop.  When your deck gets razor tail, its becomes a weapon against you and anyone need you while you’re skating as being hit with a sharpened tail is very painful.  To avoid this from happening, you could buy a carbon fiber deck that may be more resistant to wear, but more importantly you should not scrape your tail to stop.  Instead you can lightly place one foot or toe down to slow your speed or powerslide to a stop.
Moreover, we love the amazing variety of skateboards that Plan B has. Plan B’s team consists of some of the most famous professionals out there like Ryan Sheckler, Torey Pudwill and Chris Cole and all of their pro boards are available. Ranging from small skateboards (like Team Tripper mini) that are best skateboards for kids to their full size deck range that starts at 7.6 with the Felipe Flashback deck, Plan B has covered it all. Might I add that their full size skateboards are ideal for a smooth ride in the park and carve out all the turns perfectly. Most of the Plan B skateboards are around the 8 inch to 8.25 inch size which is the most popular size of the skateboard at the moment.
There is one question that one or another might have had in mind before: What is the best skateboard deck brand? Unfortunately, we don’t have a satisfying answer. But we did our very best and moved mountains by coming up with a very complex formula that takes sold decks, brand shop visits, search queries and lots of other fripperies into consideration to display a list of your favourite skateboard brands of 2017.
These films have helped improve the reputation of skateboarding youth, depicting individuals of this subculture as having a positive outlook on life, prone to poking harmless fun at each other, and engaging in healthy sportsman's competition. According to the film, lack of respect, egotism and hostility towards fellow skateboarders is generally frowned upon, albeit each of the characters (and as such, proxies of the "stereotypical" skateboarder) have a firm disrespect for authority and for rules in general. Gleaming the Cube, a 1989 movie starring Christian Slater as a skateboarding teen investigating the death of his adopted Vietnamese brother, was somewhat of an iconic landmark to the skateboarding genre of the era.[citation needed] Many well-known skaters had cameos in the film, including Tony Hawk and Rodney Mullen, where Mullen served as Slater's stunt double.
Real’s video output continued with Kicked out of Everywhere (1999), Real to Reel (2001) and Seeing Double (2002). Following these full-length releases Real adopted a different approach to video making with a number of shorter tour-based and remix video releases which chimed with the shorter attention spans of the Internet generation – these include titles such as Real ‘Remix Project V1.1 (2007) and Real ‘From the Vaults V.1 (2007).
Its All Powell-Peralta Ligament decks feature a wider and more robust polymeric strap. The ligament strap is so powerful that in case your board breaks, the ligament strap will hold your deck together to allow you to ride out of it. Ligament decks are same in weight as a 7-ply maple deck but provide more pop and stiffness that lasts longer than ordinary boards.
Another bonus of shopping at an actual skate shop is that you get to see what the boards look like in person. Most skate shops will have a cool wall of boards, and it's fun to just stand there and look at all the graphics. If one jumps out and grabs you, then you can ask the shop owner about the brand, and whether it's a good one. There's nothing wrong at all with buying a skateboard deck because you like the graphics!
Many jurisdictions require skateboarders to wear bicycle helmets to reduce the risk of head injuries and death. Other protective gear, such as wrist guards, also reduce injury. Some medical researchers have proposed restricting skateboarding to designated, specially designed areas, to reduce the number and severity of injuries, and to eliminate injuries caused by motor vehicles or to other pedestrians.[102]
500AlmostAluminatiAnti HeroArborBambooBirdhouseBlindBonzingCometCreatureDarkstarDB LongboardsDogtownDusters CaliforniaElementEnjoiEverseshFlipFocusFoundationGlobeGoldCoastGravityHabitatJartKebbekKrookedLandyachtzLaybackLushMadridMakahaMoonshine MFGOmenPennyPlan BPowell PeraltaPrism SkatePunkedRayneRealRememberRivieraRoad RiderSan ClementeSanta CruzSector 9Suicidal SkatesToy MachineWarehouseZ-FlexZero
Skateboarding during the 1990s became dominated by street skateboarding. Most boards are about 7 1⁄4 to 8 inches (180 to 200 mm) wide and 30 to 32 inches (760 to 810 mm) long. The wheels are made of an extremely hard polyurethane, with hardness (durometer) approximately 99A. The wheel sizes are relatively small so that the boards are lighter, and the wheels' inertia is overcome quicker, thus making tricks more manageable. Board styles have changed dramatically since the 1970s but have remained mostly alike since the mid-1990s. The contemporary shape of the skateboard is derived from the freestyle boards of the 1980s with a largely symmetrical shape and relatively narrow width. This form had become standard by the mid '90s.[42]
The brand based in Vancouver provides skateboards featured with construction of fiberglass and bamboo, Rayne longboards assure the best skating experience you can imagine. Decks made by Rayne has the ultimate crispy flow produced from the highest quality bamboo. The boards come with unique designs that standing out with the cool personality that beats other competitors in the market.
QuartetQuasiR.A.D.RandalRayneRealReality GripReflexRemind InsolesRicher PoorerRictaRIPNDIPRoger SkateboardsRogueRoyalRVCASabreSalt & StoneSanta CruzSanta Monica AirlinesSchmitt StixScramSector 9Shake JuntShortysSilverSK8MAFIASk8ologySkate MentalSkateknifeSkeleton Key MFGSkullcandySml.S-OneSourSOVRNSpitfireSquare UpStanceStateStereoTensorThank YouThe HundredsThe Killing FloorThe Quiet LifeTheoriesThrasherThunder TrucksTiredToy MachineTrafficTransworldTriple EightTurbokolorTwo Cents SkateboardsUnitVagrantVansVenomVentureVicious GriptapeVideoVisionVolcomWayward WheelsWelcomeWKNDZ FlexZero
The smaller the wheel diameter, the easier it is to do tricks, because it makes the board sit closer to the ground. But beginners will definitely have an easier time controlling a board with larger diameter wheels. Think of the larger wheels as being akin to training wheels. If you don’t want your board to have “pop” as you are learning, you can choose softer wheels, all the way down to a 73a. They won’t let you go as fast, and you’ll have to push off more often, but they do make it more likely that your board will stay on the ground.
The concave of a skateboard deck is how curved the width of the deck is.  Very few skateboard decks have no concavity and are completely flat as then they would break very easily and be hard to do flip tricks on.  Steep concave decks are the most study and best to do flip tricks on because the slope of the deck catches the skater’s toe or heel more easily and flips the board faster than a shallower deck.  Shallow concave boards are better for cruising around and vert skating as they are more comfortable on your feet and more controllable.  In practice, these recommendations are pretty general and it ultimately comes down to personal preference on the the best deck concavity.  But if you have no idea, following the recommendations or picking a board with moderate concavity is a good place to start.
You might have seen people talking about cruising styles and board drills but don’t find the talk attractive because you are not a skateboarder. This game gives you a lot of stuff to talk about with your friends and family relatives who skate as well. In fact, when you will get old, you will love to contribute to the pro conversations about skateboarding styles and maneuvers. It’s all about the ride and talks!
Rarely you make notice your deck to lose concavity or flatten over time.  Although this isn’t very common, it’s typically due to water damage and is a sign of many other problems.  Wooden decks are not meant to get wet and they will warp, crack, and break if they get soaked.  It’s pretty simple and straightforward  to avoid this problem.  Keep your skateboard in a dry place, and don’t skate in the rain or through puddles.  Skating through water will also destroy your bearings, if deck warping and breaking wasn’t a good enough reason for you to not do it.
Typically when looking at different completes you will see size dimensions in the format of ~7-8 x 31-34″.  This measurement is referring to the width and length of the skateboard deck.  Typically all other parts are relatively standard and the deck size is the main thing to look for.  Standard skateboard widths for beginners are between 7.5-8.25 with smaller boards being better for younger and smaller guys.  You don’t really have to worry about length much as long as it’s shaped regularly.  You may hear about the concave of the deck or a special type of board construction, but for the most part, it will not matter much to a beginner.  If you have no idea what size would be best you will never go wrong with a 7.5 or 7.75.
Buy a quality deck. Decks available at your local department store are usually of low quality and have pictures of cartoon characters on the bottom. If you want an entire board, but don't know exactly what you want, buy a complete skateboard from a company or go to a skate shop and ask the employee about the products. If you want to ride on the streets, get a 7.5 to 8.0 deck, if you want to ride vert, 8.0 and up is probably best. However, it's all personal preference. People street skate all the time with decks over 8.0.

Also called the mounting hardware, the skateboard hardware is useful in connecting the trucks to the deck. Every truck is actually in need of 4 bolts and locknuts. If you are planning to buy hardware for your custom skateboard, then note that they are often sold in sets composed of 8 parts, though it is also possible for you to buy individual parts separately when required.


The skateboard companies that are considered at the top include Element Skateboards. Founded by professional skateboarder Johnny Schillereff in 1992, the company’s goal was to expand on Johnny’s “Elementality” vision to build a company that helped to bring awareness to skateboarding. The goal is to focus on its uses in nature and the environment and the interconnecting of art and skateboarding. Developed from an urban mentality that was rough around the edges, the brand was transformed to embrace the “tree” logo with an emphasis on the positive and making the world a better place. A customer can purchase complete skateboards that include the decks, wheels, trucks, and bearings or they can customize a deck to suit their needs. Accessories and clothing are also offered. There are 20 professional skateboarders on the Elements team including such names as Brandon Westgate, Nyjah Houston, Mark Appleyard and Nick Garcia.
Amazing! Great pop and amazing concave. Last for a long time as long as you don't get the bamboo board. They have an earthy style like element, but with a better board quality. The only reason they are not #1 is because they aren't as well known. You cannot snap these boards! I have skated them for a couple of years because they are so good. BUY ELEMENT BOARDS! You wont regret it.
For the latest in skateboard clothing, fashion clothing and accessories, you have come to the right place here at SkateHut. We are the number one online skate shop and we are product leaders in all things skate – and that includes one of the most extensive collections of skate clothing around! Shop online today for a full range of skate clothes; browse our website for everything from hoodies and outerwear to t-shirts and tank tops, shirts and jeans to hats, belts and accessories. We offer stylish skateboard clothing for babies and toddlers, kids and adults so you can find skate clothing for the entire family. Browse online for the best skate brands and clothing brands around including Vans, MPG, Puma, Neff, Oakley, DC, WeSC, Aplinestars, Santa Cruz, Under Armour, Nike and many, many more. To view the full range, shop now and filter by product at your own convenience and leisure or call our team if you are looking for a specific product or you need help in choosing the right skate clothing for you. With hundreds of styles to choose from, we are confident that you will find the most stylish skateboard clothing to meet your sporting requirements.
The best criticism you could make about skateboarding in general right now is that it takes itself too seriously. Rightfully so. Skateboarders are often under attack, and what they do is illegal in most places. Skate culture is constantly being ripped off and bastardized. That's why it's so important to have a healthy sense of humor about it all, and that's why it's important that skateboarding has Roger.
While the skateboard has a lot of moving parts, one's safety, comfort, and ease to learn new skills and perform tricks are all of equal importance. For this reason, choosing the right type of deck and wheels should be two of the first considerations, as the board's shape, material construction, and wheel makeup will all have a significant impact on your ability to control the equipment and maintain good aerodynamics. Additionally, the width of the deck is important, so one must take their height, shoe size, and style of riding into account in order to ensure the deck offers as much support as possible, regardless of application.
Skateboards, along with other small-wheeled transportation such as in-line skates and scooters, suffer a safety problem: riders may easily be thrown from small cracks and outcroppings in pavement, especially where the cracks run across the direction of travel. Hitting such an irregularity is the major cause of falls and injuries.[102] The risk may be reduced at higher travel speeds.
The criteria used to select the brands featured varies – some are included due to their commitment to technological innovation and for their efforts to improve the products they offer through experimentation, others are included for what they offer in terms of cultural depth and for their contributions to skateboarding culture as a whole, whether that be through graphics, video output or simple attitude.
×