Canadian maple wood decks are the industry standard and is what the vast majority of decks on this list will be made of.  However, is the seller just says “maple” the deck is typically made in China and the wood may be slightly softer and lower quality.  This is more common among the lower cost blank decks, and most pro brands or higher end blanks are typically 100% Canadian maple.  In my opinion, the difference between Canadian and Chinese maple decks is slight and in many cases, a cheaper Chinese deck may be the better option for you if you have a small budget or tend to go through decks very quickly.

The grip tape found on a skateboard can actually be defined as the grainy sheet, which resembles sandpaper that also comes with a sticky underside. Such underside needs to adhere to the deck’s surfaces as a means of increasing traction or grip. No matter what skating style you use, the grip tape is extremely helpful in your attempt to stay on the board.
Element is of the most mainstream brands in the industry today that has sponsored legends like Nyjah Huston and Bam Margera.  There are many pro decks to choose from with some amazing tribal designs and they have introduced a “featherlight” technology that allows Element to have some of the lightest boards on the market today.  Some may call Element “too mainstream” or “sellouts”, but at the end of the day, they produce quality products in a variety of artistic designs.
Skateboard hardware is used to connect the skateboard trucks to the skateboard deck. Skateboard hardware refers to the bolts and locknuts used when building a board. The bolts can have an Allen or Phillips head. Skateboard hardware comes in many different lengths, and often includes one different colored bolt so that the rider can mark the nose of their board.

Ever notice small vertical or horizontal cracks through your grip tape or by the hardware of your trucks?  These are called stress or pressure cracks and are basically mini fractures of your skateboard deck that typically are seen in the areas of the deck that withstand the greatest impact (around the trucks).  A few pressure cracks is generally no big deal and you won’t even notice them while skating, but they can compound and grow larger and make your deck lose “pop” and increase the chance of snapping.  To avoid pressure cracks, you cant use riser pads underneath your trucks to reduce the level of impact your deck takes.  You should also avoid over tightening your hardware and storing your skateboard in a very humid place as both of these practices can also make your board weaker and more susceptible to pressure cracks.
“They built the industry before they built their business,” said Denike who became one of the early product testers as a 15-year-old when he was approached by Novak and Shuirman in a skateboard park. “It was just raw entrepreneurial spirit. They took it from a fad to an actual business and, as a group, decided they were going to focus on growing the industry. If they were good businessmen, they would get a piece of that pie.”
Choosing a skateboard deck can be approached in a few different ways: you can choose your board based off the graphic, the brand, the shape, the width, or even the color. For most skateboarders, it’s a combination of all these factors, but if you’ve never skateboarded before, you may not know what shape, width, or brand you like best. In this case, choosing your favorite graphic would make total sense.
Since its inception in 1990, Alien Workshop has gone through a number of changes of ownership, first being bought by Burton Snowboards in February 2008, then purchased from Burton by original Alien Workshop rider and reality TV show star Rob Dyrdek in January 2012. Following Dyrdek’s purchase of the brand and its umbrella company DNA Distribution, (also incorporating Habitat skateboards, Habitat footwear and Reflex bearings), an announcement was made in October of 2013 that Dyrdek would remain as a minority shareholder of DNA Dist, with the majority of shares purchased by Pacific Vector Holdings, (also owners of No Fear clothing and Gatorz sunglasses).

In 2003 Go Skateboarding Day was founded in southern California by the International Association of Skateboard Companies[53] to promote skateboarding throughout the world. It is celebrated annually on June 21 "to define skateboarding as the rebellious, creative celebration of independence it continues to be."[54][55][56][57][58] According to market research firm American Sports Data the number of skateboarders worldwide increased by more than 60 percent between 1999 and 2002—from 7.8 million to 12.5 million.[59]
This is an interesting option because it is basically a hybrid between a blank and pro skateboard deck.  It’s like a pro board in that is has a “brand” and logo, but the cost is similar to blanks and they don’t sponsor the same quantity and caliber of professional skaters that other pro brands do.  While the logo is really cool and the rest of the parts seem to be high quality, you may not get the same brand recognition with Punisher as you would with other brands like Element or Toy Machine.  This deck is also 7.5″ which makes it a great choice for a younger beginner.  This is the perfect beginner skateboard for someone who doesn’t really care about the brand name, but still wants the style and performance of an above average professional skateboard.
Swing boarding is the activity where a skateboard deck is suspended from a pivot point above the rider which allows the rider to swing about that pivot point. The board swings in an arc which is a similar movement to riding a half pipe. The incorporation of a harness and frame allows the rider to perform turns spins all while flying though the air.
In 2015, Hockey was announced to the world as Fucking Awesome’s sister brand with the release of their first eponymous video clip ‘Hockey‘ featuring riders John Fitzgerald and Donovon Piscopo. Since that first release Hockey have added former Anti Hero rider Andrew Allen to their team, along with Ben Kadow, a move announced in their second video – Hockey II.

Powell Peralta has gained increasing popularity in the 1980s, when skateboarding became an increasingly more sought-after action sports. Since then, they have been developing skateboards tailored to customers, taking reviews and critiques into consideration every time they were building a new model. The Powell Golden Dragon is a direct result of such careful consideration and tailored-modeling.
A cruiser board is just that, a board that’s ideal for cruising across town. Cruiser boards have kicktails and are usually about the same size as “popsicle” decks, but with more variety in shapes. Cruisers are ideal for getting around because they are lighter and more nimble than larger longboards, allowing you to bob and weave through urban obstacles. Uniquely shaped cruiser decks have also become popular for transition skating because they add style and flavor without having a strong affect on the way the board skates.

Peralta put together the Powell skate team under the Bones Brigade moniker, employed the services of photographer, artist and visionary C R Stecyk III and was the talent scout responsible for bringing skaters such as Tony Hawk, Rodney Mullen, Lance Mountain, Mike Vallely, Guy Mariano, Tommy Guerreo and inventor of the ollie Alan ‘Ollie’ Gelfand, (amongst many others) to the attention of the global skateboard community.
The use of skateboards solely as a form of transportation is often associated with the longboard.[108] Depending on local laws, using skateboards as a form of transportation outside residential areas may or may not be legal.[109] Backers cite portability, exercise, and environmental friendliness as some of the benefits of skateboarding as an alternative to automobiles.

Founded by the pro skateboarder Marc Johnson in the year 2000, enjoi has been on the market for over two decades now. They have since expanded, and started producing skateboarding accessories and clothing apart from just skateboards. Since then, they have adopted a panda as their logo. This logo is featured on most of their products and has quickly become the company’s trademark.

This deck is 6-inches-by-22.5-inches with that classic cruiser shape. The board is made with 6-ply bamboo and maple construction, which is lightweight, flexible, and eco-friendly. Bamboo Skateboards claims this board has a turning radius not seen in most mini decks. The small, blank deck is heavy duty and durable in a way not all mini cruisers are. This non-carbonized board is ready for you to slap on the grip tape and artwork you want and then get riding.
We love Powell Peralta for a number of reasons as do all its customers but the foremost reason being its variety in terms of the skateboards that it manufactures. It has a collection of 30 different skateboard models, with a fusion of unique graphics and colors. They offer different skateboards that you can choose from, depending on your riding style, budget, body fitness and riding style.

The ENJOI line of skateboards is made to professional standards, which means that not only are you getting a durable ride, but you’ll also get a skateboard made to handle a lot of situations. You can ride this board on the street, at the skate park, on trails, and more. These decks are made with a very consistent method that is ideal for trick riding, especially.

The Element Quadrant #14 board is 8-inches wide and 31.75-inches long, from nose to tail. This deck features a bare top that needs grip tape and a design on the bottom with four quadrants featuring the Element symbol in alternating red and black backgrounds. The wheelbase between the trucks is just over 14 inches while the nose is 7 inches and the tail is 6.325.
Be sure to purchase from a reputable source. Buying online might save you a few dollars, but try your local skate shop first. The few extra dollars you spend support the shop and your local skate community. Developing a good relationship with a local skate shop often saves you money in the long run. The completes are not as good as custom made, but you can get them for a lot less money and upgrade any bad components later.

Skate graphics have often incorporated blood, guts, and gore into board and T-shirt designs, but few brands render gnarliness quite as well as Heroin Skateboards. It's no surprise that a brand founded by artist Mark “Fos” Foster would have such tight art direction. Fos has a loose, low-fi handstyle that can be see in much of the brand's designs, and the delinquent band of team riders and their antics are a perfect embodimentof whatever “image” Fos is after.

Skateboards are for people who want to try something new and extreme.  If you have not given it a shot and you want to challenge yourself then you should try skateboarding.  It is a fact that there are certain risks that go along with skateboarding.  However, skateboarding can teach you to balance and it is also a great way of losing weight.  Skateboarding can also help you in making friends while you are in the park.  With skateboarding, you can learn perseverance and build confidence.
Are you on a hunt for the best skateboard on the market today? Then you are in the right place as this comprehensive article is designed to give you information about skateboarding and types of skateboards in general. By learning about the different types of skateboards and what each one can do, figuring out what works for you the best is a lot easier.

There are a lot of good skateboard brands out there. For a start, you can check out this list of Top Skateboard Deck Brands, but there are piles of other brands out there that are great. There are local brands, brands from other countries, and brands that you or I have never heard of. Aside from a skateboard company's reputation for quality and good design, a brand is also a brand; that is, it comes with its own character and cred. You might like a brand simply for what it represents, whether that's the company's attitude or its team or its presence at the skate park. The first step in choosing a brand is getting out there and seeing what's available.   

What started off as a crew of Montreal skaters filming full videos featured on SLAP magazine has suddenly turned into one of the highest quality and apparel brands in skating today. When Virgil Abloh drops by to your pop-up shop and your skate contest, you must be doing something right. Coming fresh off a recent collaboration with Vans, Dime seems to be keeping the clean silhouettes and instant classics on deck.
The skateboard industry is as colorful and competitive as the sport itself.  It’s no surprise that the top skateboard brands all take on that daring, free expression and edgy creativity that is quintessential to the skateboarding community.  But it’s not all fun and games — it takes a lot more than producing wooden decks with dope graphics to make it to the top.  It takes hands-on dedication and genuine passion for the sport.
It's too cold and dark to skate in Sweden for about six months out of the year. That must be when brand mastermind/artist Pontus Alv schemes on the global takeover he's been orchestrating for Polar. Not only are the brand's hats, tees, and hoodies some of the most coveted gear in the skate universe, the Polar team travels the globe hosting events, filming video clips, and getting people hyped on vigilante-style street skating. Look for Polar to come to your hood and build awesome, illegal concrete skate obstacles under a bridge, then bounce like gnarly, European skate tooth fairies. Good luck finding a tee or hat at this point—hype has made to goods rare, but let's hope as the excitement grows Mr. Alv will expand his distro.

There are a lot of good skateboard brands out there. For a start, you can check out this list of Top Skateboard Deck Brands, but there are piles of other brands out there that are great. There are local brands, brands from other countries, and brands that you or I have never heard of. Aside from a skateboard company's reputation for quality and good design, a brand is also a brand; that is, it comes with its own character and cred. You might like a brand simply for what it represents, whether that's the company's attitude or its team or its presence at the skate park. The first step in choosing a brand is getting out there and seeing what's available.   
The core of the skateboard trucks is extremely lightweight, compared to the other skateboards we listed. They still sport a heavy-duty aluminum, but their initial design helps the skateboard be lighter and easier to pivot. It also arrives un-assembled which allows for the adult or child to have a sense of accomplishment when they put the board together. You will also be able to customize it to your heart’s content!
Remember the cool skate kids wearing Workshop tees in the '90s? Well you don't see too many of those these days, but AW is still one of the best “big” skate brands going. The team alone—featuring Supreme muse Jason Dill, tech-gnar wizard Anthony Van Engelen, and the most handsome guy on a board, Dylan Rieder—puts the brand in the top 10. And even though you might not associate legacy riders like Rob Dyrdek with anything cool at all, he pulled one of the most boss moves in all skate business history when he bought the brand that first sponsored him 20 years ago back from Burton (who bought the brand from Chris Carter in 2008) last year, so Workshop is once again skater-owned.

Jump up ^ Williamson, Elizabeth (October 11, 2013). "Skateboarders See a (Kick) Flip Side to the Government Closing: With Washington Plazas Empty and Patrols Down, a Banned Sport Is Suddenly On" (video). The Wall Street Journal, U.S. Edition. Retrieved March 30, 2017. One positive thing about the gov't shutdown – spots at gov't buildings are now skateable – Darren Harper, Pro Skateboarder, via Facebook.

Where do you live? I forget that this is a global community. If you're US/CA I would recommend going to a local shop and testing some out and see what you like the most cause a Girl will be different from an Almost from an Expedition in very little ways that might turn you off the board shape more than their graphics/team. I would get between a 8" and 8.25" deck though.
Founder Richard Novak is also widely credited as creating the skateboard industry as we know it today by establishing skateboarding as a separate culture and business by wrestling the sport away from the control of the roller-skating industry in the early 1970’s and promoting it through sponsoring events, supporting the nascent skateboard magazine culture, pioneering technologies within skateboard, truck and wheel construction and establishing the edgy cultural identity of skateboarding from the very beginning.
“As far as the actual look of the vast majority of contemporary graphics goes, I’d say that it feels to me as if something has been lost. It’s down to what you can do with modern heat transfer printing techniques – you can literally just take a photograph from the Internet and print it identically straight onto a skateboard. Speaking personally, there’s very little to challenge you there: either from the point of view of creating graphics, or from the consumer’s perspective. Whereas back when screen-printing was the norm, every time a graphic was produced the artist was physically cutting the key line out by hand. The key line is the final black line that forms the outline of whatever it is that you’re printing and ties in all the other colours together. You can see this in the early Sean Cliver graphics for example, where it’s clear that he has hand cut the key lines as precisely as he was able to, but looked at from today’s perspective they’re not perfectly precise, which is what gives Cliver’s earliest stuff its specific look in my opinion.”
×