In March 1976, Skateboard City skatepark in Port Orange, Florida and Carlsbad Skatepark in San Diego County, California would be the first two skateparks to be opened to the public, just a week apart. They were the first of some 200 skateparks that would be built through 1982. This was due in part to articles that were running in the investment journals at the time, stating that skateparks were a good investment.[6][27][38] Notable skateboarders from the 1970s also include Ty Page, Tom Inouye, Laura Thornhill, Ellen O'Neal, Kim Cespedes, Bob Biniak, Jana Payne, Waldo Autry, Robin Logan, Bobby Piercy, Russ Howell, Ellen Berryman, Shogo Kubo, Desiree Von Essen, Henry Hester, Robin Alaway, Paul Hackett, Michelle Matta, Bruce Logan, Steve Cathey, Edie Robertson, Mike Weed, David Hackett, Gregg Ayres, Darren Ho, and Tom Sims.[35]
^ Jump up to: a b Costello, Becca (November 10, 2005). "Skateboarding is not a sport: Skateboarding the Sacramento streets takes skill, balance and nerve. Just don't call it a sport". Sacramento News & Review. Retrieved December 10, 2012. Despite stickers, posters and T-shirts stating the contrary, it turns out that skateboarding is, in fact, a crime. “In the downtown district, you can skateboard as transportation,” Rafter explained. “Anything other than all four wheels on the ground and getting to where you’re going, they have a problem with.”
First, you’ll need to consider the size of the skateboard. Most skateboards are about eight inches wide, but if you have very large feet, or you really want to feel very stable as you learn, consider going with something wider. Remember that the wider you go, the harder it is to learn tricks and to go around curves. If you want to rotate your board mid-air during a jump, you need a board that is no wider than eight inches.
The board also boasts of its reasonably small size and lightweight nature, making it easy to control and ride. In addition, carrying it wherever you want to go is also much easier because of its lightness. It is flexible enough that it can accommodate the needs of different kinds of users, including cruisers, travelers, beginners, expert riders, and kids.
Before Zoo York, Supreme, and 5Boro, New York had SHUT. For a short while, SHUT ruled, but soon the business fell out and founder Rodney Smith left to start Zoo York with Eli Morgan Gesner (who drew the original SHUT logo), and Adam Schatz. SHUT went dormant while the three men grew Zoo York into a successful business, and when they sold it off to Ecko in 2006, SHUT was reborn. The brand's flagship store resides on New York City's Lower East Side, so you can go witness skateboard history in person any time you want.
Element Skateboards are also one of the most popular and best skateboards in the world of boarding. If you choose to purchase it, you will get high-quality skateboards that will stand the test of time. The best thing about them is environmental friendliness that they promote along the way. Therefore, you will enjoy in Driftwood deck, which are much more affordable and lighter.
Krux make some great trucks. Krux makes "downlows" trucks, that have a lower hanger and kingpin than even Grind King. However, you will need a hex tool to adjust them. The Krux IIIs with Topless System are even lighter, with special bushings that feel broken in from the start, but that also provide a faster snap back into position. Krux trucks are light and low.
With distinctive graphics, often touching upon controversial issues such as racism with American society such as the infamous Jim Thiebaud ‘Lynch the KKK’ graphic designed by Natas Kaupas and Kevin Ancell, and classic Jeff Klindt graphics such as the James Kelch ‘James’ board, which was recently re-released, Real’s aesthetic has always been instantly recognisable.
Many of the most popular skateboard brands sponsor teams of skaters, like Zero's Jamie Thomas and Element's Barn Margera. Professional skaters are often good sources of information as to what skateboard you should buy. If a pro skater rides a certain board, there is a good chance that if he or she finds that it is high enough quality you will also like the board. Users looking for a new skateboard will want to research a variety of different brands to find the one that best suits their needs, based on function and features.

Mini Cruisers have exploded in popularity in recent years. These short and skinny boards may not have the versatility of a standard skateboard, allowing for a full range of tricks and travel, but they are ideal for urban and college living where space for storage and riding are both minimal. If you want to ride a mini-cruiser, but you hate the plastic decks or you want to build your own, check out the Bamboo Skateboard mini cruiser deck.
The logos you grow up with always mean more to you than the ones that came before or after. I'm not even going to suggest that I can be unbiased about something that means so much to me; but I also like to think that as a skater who has worked within the industry as an artist and a skate rat that grew up in the Midwest, I can separate my love of the activity from my personal feelings about the industry and companies. These are important logos for many reasons. Some are more powerful and meaningful than others but what I'm addressing are icons that have come to represent skateboarding in a lot of ways... succinctly and graphically.

Founded in 2008 in Pennsylvania, Punisher’s goal has been to make graphically pleasing skateboards that have designs that resonate with the rider on a deeper level. Each artist is handpicked by Punisher to design an original, unique image that is then incorporated into the skateboard. The fantastic graphic designs combined with the quality of the skateboard itself make for a very personalized riding experience.
Its All Powell-Peralta Ligament decks feature a wider and more robust polymeric strap. The ligament strap is so powerful that in case your board breaks, the ligament strap will hold your deck together to allow you to ride out of it. Ligament decks are same in weight as a 7-ply maple deck but provide more pop and stiffness that lasts longer than ordinary boards.
I rode for them as a ‘Amateur’ skateboarder in ‘79-’80, and they, at that time, had one of the Best boards out on the market, made of Fiberglass in a torsion box, with a foam core, and urethane ‘bumpers’ all around. I still have that board, and one set of C-70 Reds from then. I skated that gear hard, for many years, too. I still own 6–7 full sets of “krypto’s” for skateboards, and 8 that’re on quad-roller-skates. Great wheels, and they’re still in use.
Hardware won’t have an effect on your skating. Standard 7/8 - 1 inch hardware will work for most skateboards. However, if you use riser pads, be sure that you have long enough hardware to go all the way through the deck, trucks and riser pad. If you're unsure what length of hardware you need, give one of our experts a call at 888.450.5060 and we'll be stoked to help you out.

FTC was cool before there were skate and hype blogs around to tell you that they were cool. Mastermind Kent Uyehara built his brand from the back of a sporting goods shop into an international symbol of cool, with franchise locations in Sacramento, Tokyo, and Barcelona. FTC isn't just the go-to spot for skate gear in those cities-it's a full-blown brand that any skater would be proud to wear.

Lovenskate have produced a number of full-length videos throughout the 16 years of their existence, including the 2015 release Lovenskate – Smorgas’board although more recently they have followed the direction of skate media in general and concentrated on releasing shorter, rider-specific clips such as Jordan Thackeray’s Welcome clip and more recently the Batch Capture series.
You may think that this is a cheap board with a low quality. If you are, then you are certainly wrong, my dear. It has soft wheels which will help you to get stability when riding. It also takes less effort to push the board because the deck is low compared to the other boards. Henceforth, it is the most comfortable board to ride for the beginners.
“We make 38 different proprietary shapes, and what is more important than the shape is the leverage that we design on each board. The mold we use, and where we drill on each mold is the magic. Do all popsicles ride the same? Of course not. We are a step beyond almost everyone with that because I am nerdy about how stuff rides and performs. This is what our riders skate and love, we aren’t trying to capture some demographic.
Now you need to look at the wheels of your skateboard. There are dozens of different sizes, materials, shapes, and features of skateboard wheels, and it can get confusing for beginners. The most common type of wheel is a hard plastic wheel, and for beginners, you’ll usually see a “90a” level wheel. Professional skaters often choose even harder wheels, up to a 100a, because it gives them more “pop” for tricks. But somewhere between a 90a and a 97a is usually best for beginners.
Toy Machine is an Ed Templeton company and one of the best skateboard companies of its time. Ed is an Orange County original skater and developed the board he wanted to skate on, thus creating the Toy Machine Brand. Though the Toy Machine team has seen many changes, it has always held onto professional skaters that can provide insight in the latest needs of boards. Toy Machine skateboards are known for their signature monster graphics, which have made them a top skateboard brand.

When looking at skateboarding’s history, the only thing that’s stayed the same is the overall structure: every board consists of four skateboard wheels, two skateboard trucks, and a riding surface of some kind. And while we’ve come a long way from the days of metal and clay wheels, some aspects of skateboarding - like the brands manufacturing some of the most trusted products - haven’t changed at all. Independent Trucks has been designing trucks since 1978. Powell Peralta, the company responsible for Powell Skateboards, Bones Wheels, Bones Bearings, and the Bones Brigade also started in 1978. NHS, Inc., the company that produces Santa Cruz Skateboards, Independent Trucks, Bronson Speed Bearings, Krux trucks, Flip Skateboards, Ricta Wheels, Mob Grip, and OJ Wheels started in 1973. It’s no wonder these brands are still doing so well - they’ve been with skateboarding since the beginning. Since the day skateboarding went from something surfers did when the waves were flat to its own sport that involves technique, practice, and careful consideration, a small handful companies have been there to help skateboarding become what it is today.
I have a dream to hook up some of the world’s best skateboarders, and make everybody know and love this awesome sport! So, in the summer of 2017, I launched SkatesZone with little more than a dollar and want it to become an interesting place for all skaters where you can find a plenty of skateboards information, tips & tricks, instructions, and more.

However, this same company decided to ‘Cash-in’ on THE NAME BRAND, and now con-currently sells JUNK , made in China, at WAL MART. DO NOT BUY any ‘longboard’ they sell that has plastic trucks!! They are an accident awaiting a place to occur. I’ve seen wheels (from a company that prided itself on ‘the best wheels’) that are upwards of 4 mm out-of-round, which could easily cause speed-wobbles, even at pedestrian speeds. From my POV, they’ve opened themselves up to possibly numerous lawsuits, just because of the inferior quality, and poor design choices made in order to maximize profit.
Flip Skateboards is a high-level skateboards company that moved from the UK to California to take advantage of the American skateboarding industry. It was launched in 1991 by Jeremy Fox and by professional skateboarder Geoff Rowley, both of whom are from the UK. They both knew that to achieve the highest levels as a skateboarding company it was important to gain the recognition one can only get in the U.S. Furthermore, in 2017, Flip partnered with the European skateboard production and distribution company HLC. The decks of Flip Skateboards are made from 7-ply maple. Customers can enjoy the standard decks as well as the P2 models which are made with an oval-shaped fiber reinforcement panel which makes them extra durable. Psychedelic designs adorned many of the Flip skateboards as well as other designs. The Flip team has 15 professional skateboarders, including names such as Tom Penny, David Gonzalez, and Luan Oliveira.
I'm 31 years old and just started skateboarding for the first time I bought a creature because of the p2 kevlar veneer they throw in before the final veneer goes on plus the nose is a little less tapered then the tail making it slightly bigger but the pop I get or the spring is nutty you can feel the board torgue up power in the tail just before you launch very happy with my puchase salvatore rochester ny
Ohderii Skate Skateboards are made of a High-quality Plastic deck which will not easily break even when pressed over by a car.  It comes with 3.125″ all aluminum alloy trucks, 59mm 78A super smooth PU wheels and ABEC-7 stainless steel bearings.  It is ready to use and you can easily store it in your backpack.  It has an average rating of 4.5 on Amazon.
Founded by the original technical street skaters Daewon Song and Rodney Mullen, Almost Skateboards always pushes the envelope with fun, artistic cartoon graphics paired with high quality materials.  Almost was one of the first brands to implement carbon fiber layers to their decks in the “Impact” deck line to increase the deck’s life and better maintain its shape.
The nose and tail of a standard skateboard curve upward slightly to make tricks easier to perform. On most decks, the nose and tail are shaped slightly different. The nose is usually wider, longer and steeper than the tail which aids in nose-based (nollie) tricks, and also helps you differentiate the nose from the tail. Some shaped boards have very different nose and tail dimensions, and some old school boards lack noses all together.
You know how people say shit like: Ernest Hemingway is “a writer's writer” and it's not really clear what that means, but you sort of get it? Well Anti-Hero is a skater's skate brand. Founded by underground hero pro skater Julien Stranger, Anti-Hero is a direct expression of his attitude towards the skate industry, which is basically that skateboarding is life and fuck everything else. Anti-hero has a reputation for being one of the gnarliest skate brands around, thanks in part to their team of heavies which includes John Cardiel, Tony Trujillo, and Chris Pfanner.
×