Uses Smaller Wheels For Improved Stability – Any true skater knows that wheels are essential in terms of the type of skating performed. Powell Classic, being an original company, understands that most skaters are doing tricks or will be doing tricks. To provide greater stability, they release boards with smaller wheels designed for basic street skating.
Progressive designs deliver a more dramatic upward curve and a wider base, providing increasingly secure footing and a locked-in feel. The W-concave shape is more narrow with an additional center curve, allowing for a greater shift in energy between the heel and toe. This design also boasts more responsive control and quick turning capabilities. Tub concave decks resemble the radial shape, however their rails extend at a sharp angle instead of a gradual curve. Asymmetrical decks feature rails that extend at different angles, affording more power to a rider's heels when making turns. Less commonly used are decks with convex and completely flat shapes. Convex boards offer an upwards-arching shape, which some downhill skateboarders prefer for a more natural feel, whereas flat designs increase available foot space and are more popular for experienced riders looking to perform fancy tricks.
This deck is 6-inches-by-22.5-inches with that classic cruiser shape. The board is made with 6-ply bamboo and maple construction, which is lightweight, flexible, and eco-friendly. Bamboo Skateboards claims this board has a turning radius not seen in most mini decks. The small, blank deck is heavy duty and durable in a way not all mini cruisers are. This non-carbonized board is ready for you to slap on the grip tape and artwork you want and then get riding.
Many cities also began implementing recreation plans and statutes during this time period, as part of their vision for local parks and communities to make public lands more available, in particular, for skateboarding, inviting skateboarders to come in off of the city streets and into organized skateboarding activity areas. By 2006 there were over 2,400 skateparks worldwide and the design of skateparks themselves had made a transition, as skaters turned designers.[43][60][61][62][63] Many new places to skateboard designed specifically for street skaters, such as the "Safe Spot Skate Spot" program, first initiated by professional skateboarder Rob Dyrdek throughout many cities, allowed for the creation of smaller alternative safe skate plazas to be built at a lower cost.[64] One of the largest locations ever built to skateboard in the world, SMP Skatepark in China, at 12,000 square meters in size, was built complete with a 5,000-seat stadium.[65]

“The skateboard industry’s current focus on performance by displaying almost exclusively difficult tricks, whether technical or dangerous, is not something we relate to on our daily experience on our boards. We feel that skateboarding has much more to offer than being only a sport. It has cultural, social, artistic, sociological values and much more and it seems all these aspects are being widely overlooked by the industry. Magenta is our outlet for representing the wide spectrum of possibilities that skateboarding carries within itself.”

Skateboards, along with other small-wheeled transportation such as in-line skates and scooters, suffer a safety problem: riders may easily be thrown from small cracks and outcroppings in pavement, especially where the cracks run across the direction of travel. Hitting such an irregularity is the major cause of falls and injuries.[102] The risk may be reduced at higher travel speeds.
The concave of a skateboard deck is how curved the width of the deck is.  Very few skateboard decks have no concavity and are completely flat as then they would break very easily and be hard to do flip tricks on.  Steep concave decks are the most study and best to do flip tricks on because the slope of the deck catches the skater’s toe or heel more easily and flips the board faster than a shallower deck.  Shallow concave boards are better for cruising around and vert skating as they are more comfortable on your feet and more controllable.  In practice, these recommendations are pretty general and it ultimately comes down to personal preference on the the best deck concavity.  But if you have no idea, following the recommendations or picking a board with moderate concavity is a good place to start.

Of course, 2015 also stands for a line of new companies that drew a lot of attention on them and we are talking about some serious game-changers here. There was Sour Skateboards, who had an incredible launch (or are we talking of a comeback?) as well as Isle Skateboards (did you hear about the Bright European Skateboarding Awards 2016?), Krooked and many more. We are hyped for this year and can’t wait to explore whatever there is to come with all of you guys! We would love to know your opinion. Which are your favorite deck brands. Feel free to comment below.

FTC has grown from being the staple skate shop of the Bay Area to being a respected brand pushing skateboarding across the globe. Their SF flagship sits in the famous Haight Ashburry district, always attracting visitors and giving them a look into what skateboarding is really like in this day and age. FTC will have you covered in their own gear, and will also always be pushing the next big thing in their shops, and they never make a bad call.
A good helmet protects your most important vital organ. Remember that in some states helmets are required by law. In Oregon, for example, skaters 15 and under can be fined for not wearing a helmet. Knee and elbow pads will also save you from bumps and bruises. Knee pads are particularly valuable when learning to skate tall vertical walls because they allow you to slide down the wall on your knees instead of having to run out of every bailed attempt. Wrist and ankle injuries are common in skateboarding, so braces are another great investment.
The logo is the powerful icon that represents the company's legacy, while graphic styles tend to ebb and flow. Just as skateboarding has evolved and changed over the decades, the skateboard logo has as well, for better and for worse. Picking out the top 50 logos in skateboarding isn't an easy task. Do you separate the logo from the company and base it on visual appeal? I think that's impossible given the nature of skating. Ultimately, these are logos from companies that built the landscape of skateboarding from the ground up. So you have to take into consideration the impact of the brand as well as the logo it represents. If a logo has personal importance to you, then that's all that matters. My list is only one opinion and forged from jumping into skateboarding in 1984.

Following The Real video, the brand released full-length videos at regular intervals, with each release being celebrated as a classic overview of the era involved. 1997’s Non-Fiction, featuring founder Jim Thiebaud and a revamped team including the likes of Mark Gonzales, Keith Hufnagel, Joey Bast, Drake Jones and one-time Real female rider Jamie Reyes is seen these days as one of the precursor’s of skateboarding’s general shift away from unbridled technical progression towards a heavier emphasis on style.
Skateboarder owned and operated is Magenta's mantra. “No middle-man or business-person involved,” it says on the brand's site, so you know what you're getting from this French brand is pure, uncut skate to the core. All of the art direction and graphics are done by co-founder and team rider Soy Panday, who has developed a unique artistic perspective for Magenta. You'll likely to see numerous skaters kicking around on Magenta boards in NYC these days, and with a strong offering of T-shirts, coaches jackets, caps, and a funny boxer short collab with Lousy Livin, there is plenty to appreciate.
Minority Maple Skateboard is an aesthetically engineered, quality starter skateboard. It is solid to the core. It is made with 7-ply hard rock maple cold pressed into 32×8-inch deck. It is built to endure weight up to 220 lbs. Its mediate concave design makes it perfect for performing tricks with ease and dexterity. Its 5-inch long trucks made with genuine aluminum alloy makes it an epitome of strength and endurance. Its carbon steel kingpin and 78A high rebound PU bushing adds to its strength. ABEC-9 precision bearings are manufactured using chrome steel with 52mm 102A PU wheels making the Minority Maple Skateboard a speedster.

Today's skateboarders are founders in this sport—they're pioneers—they are the first. There is no history in Skateboarding—its being made now—by you. The sport is being molded and we believe that doing the right thing now will lead to a bright future for the sport. Already, there are storm clouds on the horizon with opponents of the sport talking about ban and restriction.[16]

Amazing! Great pop and amazing concave. Last for a long time as long as you don't get the bamboo board. They have an earthy style like element, but with a better board quality. The only reason they are not #1 is because they aren't as well known. You cannot snap these boards! I have skated them for a couple of years because they are so good. BUY ELEMENT BOARDS! You wont regret it.
The smaller the wheel diameter, the easier it is to do tricks, because it makes the board sit closer to the ground. But beginners will definitely have an easier time controlling a board with larger diameter wheels. Think of the larger wheels as being akin to training wheels. If you don’t want your board to have “pop” as you are learning, you can choose softer wheels, all the way down to a 73a. They won’t let you go as fast, and you’ll have to push off more often, but they do make it more likely that your board will stay on the ground.
It can be a bit obscure when Fergus Purcell and Will Bankhead design new Palace decks. The fact that the boys meet the Zeitgeist is proved by the step-up of the London brand by three places compared to last year. Nevertheless, these decks belong on the street. Just ask Benny Fairfax, Lucien Clarke, Danny Brady and Co. – Palace Decks are offered from 59,99 € | 50.00 GBP!
Founded by the original technical street skaters Daewon Song and Rodney Mullen, Almost Skateboards always pushes the envelope with fun, artistic cartoon graphics paired with high quality materials.  Almost was one of the first brands to implement carbon fiber layers to their decks in the “Impact” deck line to increase the deck’s life and better maintain its shape.
A skateboard consists of a deck, trucks, wheels, bearings, hardware, and griptape. All parts come in a variety of sizes, graphics, colors, and signature pro series. The deck is the essential part of any skateboard. The deck ranges generally from 7.5" to 8.5". Skaters choose their board size for many reasons, but the basic deciding factor comes down to style of skating and foot size. Transition skaters usually ride a wider deck, while street skaters tend to go with a smaller deck. Skate brands such as Girl, enjoi, and Welcome offer a wide range of boards in regards to sizes and graphics. Skateboard trucks come in either a high or low setting, and also in a range of widths. The main factors in a truck, are how well they turn, and how well they grind. Independent, Venture, and Thunder, are truck brands that are well known for their turning and grinding capabilities. The skate hardware is generally either Phillips head or Allen key bolts. The skateboard wheels range from 50mm to 60mm. Some brands offer smaller and larger sizes, but 50-60mm is the general range. Like the deck sizes, wheel sizes depend on the skater's choice of terrain: Transition skaters tend to ride bigger wheels, while street skaters usually go with smaller wheels. Bones, Spitfire, Ricta, and Wayward wheel companies all make wheels for any terrain, whether you're a street shredder or a park burner. Skate bearings follow the ABEC rating system, which includes grades 1, 3, 5, 7, and 9. Bones, Bronson, and Andale are some of the top bearing brands in the skate market. CCS proudly carries all these brands, and many more.
With Board Blazers LED Cheap Skateboards, you can quickly customize your ride.  There’s no need for any bulky battery pack or wires.  You just need to place the lights under the trucks to do the tricks.  Now, you can cruise safely with style.  It is self-adhesive and every light comes with small, long-lasting, and easily replaceable lithium batteries.  The on/off activation is controlled manually. It includes a set of 4 lights with the matching color.  It is best for all types skateboards, longboards, and scooters. It is the perfect gift for anyone.  It is the most trusted product with a rating of 4.5 on Amazon.

What longboard brand is good? This is a common question that arises when you want to buy a Longboard. The typical answer is a Longboard brand which can fulfill the customer’s demand at an affordable price. Let’s examine all the leading longboard makers in the past year and until now. Let’s also take a look at their feature, quality, design, color, small parts, and many other relevant criteria.

The most recent Girl Films production, Pretty Sweet, signified a passing of the torch for one of the most talented skate teams in the biz. Some may have been disappointed to see Rick Howard and other OGs ride the bench, but new jacks like Alex Olson and Mike Mo Capaldi, and the Trunk Boyz Elijah Berle, Raven Tershy, Stevie Perez, Vincent Alvarez, and Cory Kennedy, leave little doubt that we're in for another 20 years of epic skating and killer goods.


Taotao Girls Skateboards comply to United State Consumer Product Safety Commission (CPSC) Standard.  It has a 24″ X 6″ Maple Double Kickside Deck. It features 608Z Bearings, 3.5″ Plastic Truck & Base, and 50 x 30 mm PVC Wheels.  The Safety helmet, Knee and  Elbow Pads also comply to CPSC Standard.  It has a Cool Pink Aloha Graphic Design with an Amazon rating of 4.3.
Fury skateboarding trucks are heavier and stronger than most. Most skateboarders try to shave off as much weight as possible. However, Fury has some other special features to try to tempt you - Fury trucks are wider than most, come with a mini riser (similar to Phantom trucks), and special Fury bushings. And if that's not enough, Fury trucks have a unique ballpoint turning design, so that the hangar has a ball joint sitting in a socket in the base plate.
In the skateboarding world, there is considerable shuffling of the famous top brands as not many of them manage to stay in the spotlight for long. This continuous reshuffling paves way for new skateboard brands to come into the spotlight. However, it is important to note that no two brands are the same and comparing them is difficult but the following list has been created by extensive research of the saturated skateboard market and features the best skateboard brands out there that you must give a try. 
Canadian maple wood decks are the industry standard and is what the vast majority of decks on this list will be made of.  However, is the seller just says “maple” the deck is typically made in China and the wood may be slightly softer and lower quality.  This is more common among the lower cost blank decks, and most pro brands or higher end blanks are typically 100% Canadian maple.  In my opinion, the difference between Canadian and Chinese maple decks is slight and in many cases, a cheaper Chinese deck may be the better option for you if you have a small budget or tend to go through decks very quickly.
Here's a list of the best skateboard truck brands (read about Trucks in the Skateboard Dictionary). Trucks can be expensive, and picking out the right set of skate trucks can seem tough. But, if you get a pair of trucks off of this list, you should be good. There are other brands that are good quality too, but each of these brands has something that helps it to really stand out. These aren't put in any particular order.
In 2003 Go Skateboarding Day was founded in southern California by the International Association of Skateboard Companies[53] to promote skateboarding throughout the world. It is celebrated annually on June 21 "to define skateboarding as the rebellious, creative celebration of independence it continues to be."[54][55][56][57][58] According to market research firm American Sports Data the number of skateboarders worldwide increased by more than 60 percent between 1999 and 2002—from 7.8 million to 12.5 million.[59]
Thanks for reading the fine print. About the Wiki: We don't accept sponsorships, free goods, samples, promotional products, or other benefits from any of the product brands featured on this page, except in cases where those brands are manufactured by the retailer to which we are linking. For our full ranking methodology, please read about us, linked below. The Wiki is a participant in associate programs from Amazon, Walmart, Ebay, Target, and others, and may earn advertising fees when you use our links to these websites. These fees will not increase your purchase price, which will be the same as any direct visitor to the merchant’s website. If you believe that your product should be included in this review, you may contact us, but we cannot guarantee a response, even if you send us flowers.
Silver has edged it's way onto the scene offering nice, quality skateboard trucks, with plenty of little extras to make their trucks stand out from the rest. With things like inverted kingpins and axle caps, Silver trucks are pushing their motto, "Strength with Style." Silver trucks do look nice! Silver also sports a great team, with guys like Sheckler, Dyrdek, Rodriquez and more.
In summary - recognizing a real skateboard isn’t rocket science, but it does take some amount of brand awareness and ultimately even trial and error. We tried to take the guesswork out of it by starting SkateXS and openly sharing and celebrating each and every component we use to build our skateboards. Hopefully we have been able to share the values and priorities we put into those design decisions. 
Their fan base loves them for pushing goofy but fun looking skating that in reality is heavier and rawer than most will realize, and their board graphics and t-shirts feature art from their riders in striking colorways. Their product immediately stands out among the bunch at any shop it’s stocked. These guys are doing things exactly their way, and it’s sticking.
It is a mini-cruiser, which is known for its strength as well as its ability to offer real value for the money you spent. This skateboard can also be expected to deliver an impressive performance – thanks to the Abec 7 skatro bearings used in it. There are also 59-mm urethane wheels and the 3-inch GOLD aluminum trucks that can help smoothen each ride.
As your skateshop, we know that the list of skateboard and streetwear brands on the current market seems to be endless. To make it easier for you, we have the best and most famous European and American skateboard and skatewear brands at the skatedeluxe skateshop. Besides the biggest and best companies in the world, we also have a selection of smaller and uprising companies in stock that are worthy to represent your lifestyle.
A magazine?! This is an outrage! Yeah, it is. But Low Card has become the defacto hat brand for all the cool hesh skaters in America, so deal with it. Also, the mag's graphic tees, baseball shirts, coaches jackets, and beanies are all highly dope. The custom mesh hat program is the way to go if you feel the need to wear your “yeah, I skate” calling card on your head.
As the oldest brand on this list, Santa Cruz rightly holds the distinction of being the oldest skateboard brand in the industry and thus, the brand which effectively created the modern skateboard brand as we know it today. Founded as part of NHS Inc. a Santa Cruz based skateboard distribution company over 40 year ago, Santa Cruz as a brand has played a large part in every era of skateboarding history since its inception.
The core of the skateboard trucks is extremely lightweight, compared to the other skateboards we listed. They still sport a heavy-duty aluminum, but their initial design helps the skateboard be lighter and easier to pivot. It also arrives un-assembled which allows for the adult or child to have a sense of accomplishment when they put the board together. You will also be able to customize it to your heart’s content!
Both your height and weight should play an important role when you are choosing a skateboard. You need to find a skateboard, which fits your weight and height. Picking one, which is either too small or too big might only cause you to experience difficulty controlling it, especially if you are still a beginner learning the ins and outs of skateboarding.

As with all penny boards, the Fade has a waffletop on the deck so that you have plenty of grip and stability as you ride. The plastic material of these boards is durable enough to withstand being run over, and the trucks and wheels are of similar high quality. This board is not made for the beginner that wants to skate downhill or do a lot of speedy skating – the short length makes it dangerous for that. But if you’re just interested in commuting and want something portable, this is a great choice.


Quality wheels won’t mean much if you don’t have nice bearings which allow the wheels to spin freely on the axle of the skateboard truck. A quality set of bearings will spin well right away and actually get even better once broken in a bit. If quality bearings get dirty, they can typically be taken apart and cleaned relatively easily. A good set of bearings typically runs between $10 - $16.
In this in-depth guide, we’re going to cover how to choose the best skateboard for beginners, and review the top five beginner skateboards on the market right now. We’ll talk about how to choose the right size, what parts of a skateboard you should pay attention to, how to choose the right shape, choosing the right wheels, and more. First, let’s talk about the top five skateboards for beginners.

So now that you have an idea of what size and shape board you like, it’s time to choose a brand. A popular size is an 8.5 skateboard deck. If you were looking for a size 8.5 skateboard deck, you could narrow the decks offered on CCS.com to fit in the 8.25 - 8.5 range. This will show you all the boards in that range, and significantly reduce the boards you have to look through. Now, if you don’t have a preference on board brands, find a graphic you like and you’re all set. If this is your first skateboard or are still learning about what wood and brands you prefer, we recommend checking out a CCS Skateboard. They give you a bang for your buck, that's for sure.


Canadian maple wood decks are the industry standard and is what the vast majority of decks on this list will be made of.  However, is the seller just says “maple” the deck is typically made in China and the wood may be slightly softer and lower quality.  This is more common among the lower cost blank decks, and most pro brands or higher end blanks are typically 100% Canadian maple.  In my opinion, the difference between Canadian and Chinese maple decks is slight and in many cases, a cheaper Chinese deck may be the better option for you if you have a small budget or tend to go through decks very quickly.
Buy a quality deck. Decks available at your local department store are usually of low quality and have pictures of cartoon characters on the bottom. If you want an entire board, but don't know exactly what you want, buy a complete skateboard from a company or go to a skate shop and ask the employee about the products. If you want to ride on the streets, get a 7.5 to 8.0 deck, if you want to ride vert, 8.0 and up is probably best. However, it's all personal preference. People street skate all the time with decks over 8.0.
The Atom has also improved its position from 4th to 3rd in 2018. You can trust these Longboards. They are continuously improving their product quality and increasing communication with general and potential customers. Correspondingly, they provide an opportunity for customers to select from a wide range of style, color, design and price to the customers. If the improving rate becomes constant, it will quickly switch to the upper position immediately.
These are commonly found at walmart. Price is usually around $50, which is the price for a good set of longboard wheels. If you want a good longboard and you are on a budget, search for a bargain of a name brand on craigslist or other similar sites. Sometimes you find a jem forn cheap. I recommend buying a reasonably priced name brand such as flippin board co, landyachtz, or loaded . Hope this helps :—)
Plan B originated out of Irvine, CA and was initially created by skating pro Mike Ternasky. Unfortunately, Ternasky was involved in a car accident in 1994 and didn’t make it. The Plan B team and the boards that have emerged as his legacy to become a top skateboarding brand. Though the Plan B team had to take some time off, so as to mourn and regroup, they have returned with a vengeance and have become known as one of the top skateboarding brands. We like Plan B because of the customizable element they bring to the skateboard market and their flexible decks that stand out above other skateboarding companies.

Keep in mind that the deck width will also affect the size of the trucks that you use. You’ll need wider trucks to make a wider deck more stable. If you see a wide deck with narrow trucks, you can expect the ride to be wobbly and hard to manage. Pay attention to the bushings on the board as well. If the bushings are very firm, you’ll have a more stable ride, but it also makes it harder to turn. Soft bushings are much more responsive, but you do lose a little bit of stability. If you don’t know if your bushings are firm or soft, you likely have soft bushings, since this is the default.


Illegal skating includes jumping over cracks or obstacles on the sidewalk (rather than stopping, picking up one’s board and walking around the obstacle), turning, riding over certain public property and any stopping maneuver that could be considered a trick. A ticket for skateboarding is a traffic violation, but skaters are more commonly cited for vandalism or trespassing—misdemeanors that stay on a skater’s record and usually carry a fine or a sentence of 40 hours of community service, or both.
Skate graphics have often incorporated blood, guts, and gore into board and T-shirt designs, but few brands render gnarliness quite as well as Heroin Skateboards. It's no surprise that a brand founded by artist Mark “Fos” Foster would have such tight art direction. Fos has a loose, low-fi handstyle that can be see in much of the brand's designs, and the delinquent band of team riders and their antics are a perfect embodimentof whatever “image” Fos is after.
Element, based out of Irvine, CA, is one of the cool skateboard brands today. They came in first on our list due to their quality boards, sustainable practices and the affordability they offer customers. They’re an environmentally responsible brand who creates their boards without causing any environmental damage. The Element team behind the company is comprised of a group of professional skateboarders who interact with a strong belief in the Element brand. They not only offer great products, but stand for an open minded and active lifestyle and have become one of the best skateboard brands in the world.
^ Jump up to: a b "Pennsylvania Avenue National Historic Site" (PDF). National Register of Historic Places Registration Form: National Park Service: United States Department of the Interior. Washington, D.C.: Government of the District of Columbia Planning Office. pp. 191–192. Archived from the original (PDF) on January 7, 2017. Retrieved March 29, 2017.
There were several artistic skateboarding pioneers that had an influence on the culture of skateboarding during the 1980s, that transformed skateboard-deck art like Jim Phillips, whose edgy comic-book style "Screaming Hand", not only became the main logo for Santa Cruz Skateboards, but eventually transcended into tattoos of the same image for thousands of people and vinyl collectible figurines over the years.[93][94][95] Artist Vernon Courtlandt Johnson is said to have used his artwork of skeletons and skulls, for Powell Peralta, during the same time that the music genres of punk rock and new wave music were beginning to mesh with the culture of skateboarding.[8][96][97] Some other notable skateboard artists that made contribrutions to the culture of skateboarding also include Andy Jenkins, Todd Bratrud, Neil Blender, Marc McKee, Tod Swank, Mark Gonzales, Lance Mountain, Natas Kaupas and Jim Evans.[98][99]
Founded by English freestyle skater, engineer and skateboarding entrepreneur Jeremy Fox in 1987 (Fox is also reputed to be the first person to import skateboard specific footwear ‘Pro-Keds’ into the UK) Deathbox in its heyday was one of only a handful of European brands that ever controlled enough market share to be a significant player in the skateboard industry.
×