The Powell Golden Dragon 2 Skateboard is an affordable and complete skateboard for the beginners and also for the advanced skaters.  It has high-rebound, hand-cast polyurethane wheels to give you a great roll and grip.  It measures 7.5 inches wide with a colorful screen-printed bottom.  It is made in China and has an average rating of 4.2 on Amazon.
What started off as a crew of Montreal skaters filming full videos featured on SLAP magazine has suddenly turned into one of the highest quality and apparel brands in skating today. When Virgil Abloh drops by to your pop-up shop and your skate contest, you must be doing something right. Coming fresh off a recent collaboration with Vans, Dime seems to be keeping the clean silhouettes and instant classics on deck.
The wheelbase of a skateboard deck is the distance between the centers of the inner most truck mounting holes. This distance ranges between 13.5 to 16 inches and is generally proportional to the deck length on standard popsicle decks. Some specially shaped boards and cruiser decks have differing length/wheelbase ratios. Wheelbase can impact stability and turning radius, but the effect is often subtle and not a major concern for a beginner.
The concave of a skateboard deck is how curved the width of the deck is.  Very few skateboard decks have no concavity and are completely flat as then they would break very easily and be hard to do flip tricks on.  Steep concave decks are the most study and best to do flip tricks on because the slope of the deck catches the skater’s toe or heel more easily and flips the board faster than a shallower deck.  Shallow concave boards are better for cruising around and vert skating as they are more comfortable on your feet and more controllable.  In practice, these recommendations are pretty general and it ultimately comes down to personal preference on the the best deck concavity.  But if you have no idea, following the recommendations or picking a board with moderate concavity is a good place to start.
WKND turned a successful web series on the popular skateboarding site The Berrics into a company that is truly nothing but homies having fun and making videos they think are funny. Some people might dismiss them as another flash in the pan brand started by a crew of guys with some extra cash, but those same people have probably never watched American WKND and realized these guys are no fluke.
Velocity Boards Retro Banana Skateboard is a 22″ Complete Board Set with 6″ Aluminum Trucks, ABEC-7 Bearings, High-Quality Wheels, and Bushings. It is designed for maximum grip. The Deck measures about 22 x 6 x 4″. The truck Axle has a Width of 6″ and the Truck Hanger has a Width of 3″. It has a maximum load capacity of 176 lbs. (80 kgs.) It is best for skaters who are 6 years old and Up. It has an average Amazon rating of 4.7.
If you’re a beginner and you want a board that gives you a little of everything to discover, you cannot go wrong with this ENJOI board. You get everything you need, all ready to go out of the box, and made with professional-grade components. The ENJOI also earns points for having that classic cool artwork on the deck that makes it fun to show off at the park.
Remember don't get those cheap skateboards from Walmart. They won't hold up to any skating and can break from a single ollie that is landed improperly. I know they are cheap, but 2 cheap boards a week for a few weeks adds up to the price of 2 or 3 expensive boards. These boards are also heavier and slow which makes them much more difficult to do tricks on.
There really isn’t a best brand….I prefer boards that are made in America by small companies or for small companies by mid sized companies. but that’s my general preference Watson and PS Stix also makes boards for a lot of companies (mostly outside the USA from what I understand) I have a couple of Welcome Jordon Sanchez decks (pressed by PS Stix) on my spare board shelf that I can wait to skate.
The wheels of your skateboard can greatly affect your ride in numerous ways, such as the speed, your ability to take control of the skateboard’s movements, and what you feel while riding the board. The good news is that they come in various sizes, levels of durability, and colors, allowing you to pick one that suits your skateboard preference and style.

Trick wise, you can perform many different tricks. The price is well worth it because of the lightweight nature and solid design of the skateboard brand. The trucks and bearings are custom made by the company so there is no room for error as the quality is promised to be upheld by the company. Also, the package itself comes with a mini T-tool which is great for on the spot replacement of wheels, adjusting the bearings, and also interchanging the trucks if need be.

Another bonus of shopping at an actual skate shop is that you get to see what the boards look like in person. Most skate shops will have a cool wall of boards, and it's fun to just stand there and look at all the graphics. If one jumps out and grabs you, then you can ask the shop owner about the brand, and whether it's a good one. There's nothing wrong at all with buying a skateboard deck because you like the graphics!
Ever notice small vertical or horizontal cracks through your grip tape or by the hardware of your trucks?  These are called stress or pressure cracks and are basically mini fractures of your skateboard deck that typically are seen in the areas of the deck that withstand the greatest impact (around the trucks).  A few pressure cracks is generally no big deal and you won’t even notice them while skating, but they can compound and grow larger and make your deck lose “pop” and increase the chance of snapping.  To avoid pressure cracks, you cant use riser pads underneath your trucks to reduce the level of impact your deck takes.  You should also avoid over tightening your hardware and storing your skateboard in a very humid place as both of these practices can also make your board weaker and more susceptible to pressure cracks.
Rarely you make notice your deck to lose concavity or flatten over time.  Although this isn’t very common, it’s typically due to water damage and is a sign of many other problems.  Wooden decks are not meant to get wet and they will warp, crack, and break if they get soaked.  It’s pretty simple and straightforward  to avoid this problem.  Keep your skateboard in a dry place, and don’t skate in the rain or through puddles.  Skating through water will also destroy your bearings, if deck warping and breaking wasn’t a good enough reason for you to not do it.
In 1975 skateboarding had risen back in popularity enough to have one of the largest skateboarding competitions since the 1960s, the Del Mar National Championships, which is said to have had up to 500 competitors. The competition lasted two days and was sponsored by Bahne Skateboards & Cadillac Wheels. While the main event was won by freestyle spinning skate legend Russ Howell,[30][31] a local skate team from Santa Monica, California, the Zephyr team, ushered in a new era of surfer style skateboarding during the competition that would have a lasting impact on skateboarding's history. With a team of 12, including skating legends such as Jay Adams, Tony Alva, Peggy Oki & Stacy Peralta, they brought a new progressive style of skateboarding to the event, based on the style of Hawaiian surfers Larry Bertlemann, Buttons Kaluhiokalani and Mark Liddell.[32] Craig Stecyk, a photo journalist for Skateboarder Magazine, wrote about and photographed the team, along with Glen E. Friedman, and shortly afterwards ran a series on the team called the Dogtown articles, which eventually immortalized the Zephyr skateboard team. The team became known as the Z-Boys and would go on to become one of the most influential teams in skateboarding's history.[27][33][34]
Quality wheels won’t mean much if you don’t have nice bearings which allow the wheels to spin freely on the axle of the skateboard truck. A quality set of bearings will spin well right away and actually get even better once broken in a bit. If quality bearings get dirty, they can typically be taken apart and cleaned relatively easily. A good set of bearings typically runs between $10 - $16.

Uses Smaller Wheels For Improved Stability – Any true skater knows that wheels are essential in terms of the type of skating performed. Powell Classic, being an original company, understands that most skaters are doing tricks or will be doing tricks. To provide greater stability, they release boards with smaller wheels designed for basic street skating.

The core of the skateboard trucks is extremely lightweight, compared to the other skateboards we listed. They still sport a heavy-duty aluminum, but their initial design helps the skateboard be lighter and easier to pivot. It also arrives un-assembled which allows for the adult or child to have a sense of accomplishment when they put the board together. You will also be able to customize it to your heart’s content!
Since its inception in 1990, Alien Workshop has gone through a number of changes of ownership, first being bought by Burton Snowboards in February 2008, then purchased from Burton by original Alien Workshop rider and reality TV show star Rob Dyrdek in January 2012. Following Dyrdek’s purchase of the brand and its umbrella company DNA Distribution, (also incorporating Habitat skateboards, Habitat footwear and Reflex bearings), an announcement was made in October of 2013 that Dyrdek would remain as a minority shareholder of DNA Dist, with the majority of shares purchased by Pacific Vector Holdings, (also owners of No Fear clothing and Gatorz sunglasses).
×