SkateXS makes skateboards for kids, but the quality of the product is just as high as skateboards for adults. Many parents report their children being incredibly satisfied with the product. The reviews are 90% positive, and it’s easy to see why so many family members and friends turn to buying this skateboard for their young ones. Read on for more to consider when buying a skateboard for beginners.
In 1975 skateboarding had risen back in popularity enough to have one of the largest skateboarding competitions since the 1960s, the Del Mar National Championships, which is said to have had up to 500 competitors. The competition lasted two days and was sponsored by Bahne Skateboards & Cadillac Wheels. While the main event was won by freestyle spinning skate legend Russ Howell, a local skate team from Santa Monica, California, the Zephyr team, ushered in a new era of surfer style skateboarding during the competition that would have a lasting impact on skateboarding's history. With a team of 12, including skating legends such as Jay Adams, Tony Alva, Peggy Oki & Stacy Peralta, they brought a new progressive style of skateboarding to the event, based on the style of Hawaiian surfers Larry Bertlemann, Buttons Kaluhiokalani and Mark Liddell. Craig Stecyk, a photo journalist for Skateboarder Magazine, wrote about and photographed the team, along with Glen E. Friedman, and shortly afterwards ran a series on the team called the Dogtown articles, which eventually immortalized the Zephyr skateboard team. The team became known as the Z-Boys and would go on to become one of the most influential teams in skateboarding's history.
Buy a quality deck. Decks available at your local department store are usually of low quality and have pictures of cartoon characters on the bottom. If you want an entire board, but don't know exactly what you want, buy a complete skateboard from a company or go to a skate shop and ask the employee about the products. If you want to ride on the streets, get a 7.5 to 8.0 deck, if you want to ride vert, 8.0 and up is probably best. However, it's all personal preference. People street skate all the time with decks over 8.0.
Choosing a good skateboard can be tricky, if you're a beginner in the sport. There's a lot that you have to take into account, in addition to the cost. You have to also consider the complete board, the deck, the trucks, and the wheels, whether you're buying a ready-made skateboard or are putting together your own. Once you understand what makes a good skateboard, you'll be hitting up the skate parks in no time.
The grip tape found on a skateboard can actually be defined as the grainy sheet, which resembles sandpaper that also comes with a sticky underside. Such underside needs to adhere to the deck’s surfaces as a means of increasing traction or grip. No matter what skating style you use, the grip tape is extremely helpful in your attempt to stay on the board.
First off, it’s important to decide what you will be using your skateboard for and what you will be doing with it. That’s why it’s important to ask a few key questions: Are you going to be using it every day? Is it for a new hobby? Is it for competition practice? What surface will you be skating on? Will you be partaking in park skating, or street skating?
The Californian brand has performed nothing less than a triple flip and catapulted itself from #11 exactly into the centre to #8. This isn’t only nice for us, but also for skatedeluxe team rider Denny Pham, who literally stands on Flip. How hard you can skate these decks is also shown by his team colleagues Arto Saari, Louie Lopez, Curren Caples and Co. Price: from 64.99 € | 55.00 GBP!
Choosing a skateboard deck is a great place to start when building a complete skateboard. Unless you have experience riding a shaped board - something a little more retro or unusual, we recommend you start with a popsicle shape. CCS carries over 60 different skateboard deck brands that sell this popular popsicle shape. If you have questions on what size you should ride or have any other questions about building a complete, we recommend you check out our Skateboard Buyer’s Guide. Here, you’ll find helpful how-to’s for choosing a skateboard decks, skateboard trucks, skateboard wheels, skateboard bearings, and skateboard components. This guide explains every part of a skateboard and helps you choose which sizes and styles to best suit your needs.
Skateboarding is one of the most popular alternative sports around the world, for kids and adults alike. But before you hop on a board and take off, it’s important to choose the right kind of board for you. Most beginners will simply grab the board that they like the looks of, and with the endless array of deck art and styles that exist, that kind of attitude can lead to choosing a board that isn’t right to learn on.
The first thing to consider is what kind of skateboarding you want to do. Do you want to skate your local skate park and learn tricks? Do you want something for commuting across town or campus? Or, would you enjoy charging down hills at high speeds? Take a look at the options below and note which features work well for the type of skating you want to do.
Krown’s motto is to provide quality skateboards on a budget. They manage that surprisingly well; not only are their products at budget prices, but they can take quite a lot of beating too. Their skateboards arrive readily assembled and ready to ride. You won’t have to spend hours fiddling with screws and bolts to ride your new prized possession! No matter if you are a beginner or an expert looking for a good board to ride on, Krown’s product is made to fit everyone’s needs.
Progressive designs deliver a more dramatic upward curve and a wider base, providing increasingly secure footing and a locked-in feel. The W-concave shape is more narrow with an additional center curve, allowing for a greater shift in energy between the heel and toe. This design also boasts more responsive control and quick turning capabilities. Tub concave decks resemble the radial shape, however their rails extend at a sharp angle instead of a gradual curve. Asymmetrical decks feature rails that extend at different angles, affording more power to a rider's heels when making turns. Less commonly used are decks with convex and completely flat shapes. Convex boards offer an upwards-arching shape, which some downhill skateboarders prefer for a more natural feel, whereas flat designs increase available foot space and are more popular for experienced riders looking to perform fancy tricks.
There were several artistic skateboarding pioneers that had an influence on the culture of skateboarding during the 1980s, that transformed skateboard-deck art like Jim Phillips, whose edgy comic-book style "Screaming Hand", not only became the main logo for Santa Cruz Skateboards, but eventually transcended into tattoos of the same image for thousands of people and vinyl collectible figurines over the years. Artist Vernon Courtlandt Johnson is said to have used his artwork of skeletons and skulls, for Powell Peralta, during the same time that the music genres of punk rock and new wave music were beginning to mesh with the culture of skateboarding. Some other notable skateboard artists that made contribrutions to the culture of skateboarding also include Andy Jenkins, Todd Bratrud, Neil Blender, Marc McKee, Tod Swank, Mark Gonzales, Lance Mountain, Natas Kaupas and Jim Evans.
Without good grip tape, skaters have a tough time staying on top of their board. The main complaints about poor grip tape tend to be that it was never very grippy or lost its grip really quickly. Once again, we recommend trusting in name brands with years of experience supporting skateboarders. Unfortunately, if you are buying a pre-made complete skateboard, you probably won't have access to the brand name of the grip.
Following The Real video, the brand released full-length videos at regular intervals, with each release being celebrated as a classic overview of the era involved. 1997’s Non-Fiction, featuring founder Jim Thiebaud and a revamped team including the likes of Mark Gonzales, Keith Hufnagel, Joey Bast, Drake Jones and one-time Real female rider Jamie Reyes is seen these days as one of the precursor’s of skateboarding’s general shift away from unbridled technical progression towards a heavier emphasis on style.
A cruiser board is just that, a board that’s ideal for cruising across town. Cruiser boards have kicktails and are usually about the same size as “popsicle” decks, but with more variety in shapes. Cruisers are ideal for getting around because they are lighter and more nimble than larger longboards, allowing you to bob and weave through urban obstacles. Uniquely shaped cruiser decks have also become popular for transition skating because they add style and flavor without having a strong affect on the way the board skates.
Punked Skateboards is one of the top selling skateboard brands. With their innovative designs, quality boards and a variety of longboards and skateboards, Punked has taken all of the skateboard companies in the world by storm. Their brand has created a variety of boards for beginners, intermediates and even pros, so that they always have the right skateboard for you.
Buying a complete skateboard from a good brand is when you purchase an already put together board that comes with a deck, the tape already applied, the wheels, the trucks, and the bearings all screwed in. You can also make custom requirements for your complete skateboard like interchanging different trucks or bearings to better fit your own personal style of skating.
If you want to do cruising and street style on the same board then you probably want a large board and larger wheels, as many have already commented. I think that an 8 inch board with at least 56 mm wheels will be best. I think that you should find a local shop to support and to talk to about gear. I would advise getting a shop deck, with Independent trucks (at the correct width for your board, which is one detail that a local shop should be able to help with) Bones street tech formula wheels (I like profiles 1 and, I think 5), and Bones Reds bearings (not super reds, super reds are not super).
Skateboarding, as we know it, was probably born sometime in the late 1940s, or early 1950s, when surfers in California wanted something to do when the waves were flat. This was called "sidewalk surfing" – a new wave of surfing on the sidewalk as the sport of surfing became highly popular. No one knows who made the first board; it seems that several people came up with similar ideas at around the same time. The first manufactured skateboards were ordered by a Los Angeles, California surf shop, meant to be used by surfers in their downtime. The shop owner, Bill Richard, made a deal with the Chicago Roller Skate Company to produce sets of skate wheels, which they attached to square wooden boards. Accordingly, skateboarding was originally denoted "sidewalk surfing" and early skaters emulated surfing style and maneuvers, and performed barefoot.
It's really hard to continue with a small girls’ board brand when so many companies are now interested in the women's market. We feel like it's the right time to close down the brand and move on to the next chapter. Thanks to George and Juli Powell as well as Michael Furukawa for their vision and support of the brand and our mission over the last decade. Thanks to those who bought our products, our team riders, media, and to those that believed in what we were doing from the very beginning. I also want to thank Mimi Knoop who wore multiple hats over the years and was responsible for making hoopla a brand that was respected, legitimate, and one that we were proud to be a part of.
The criteria used to select the brands featured varies – some are included due to their commitment to technological innovation and for their efforts to improve the products they offer through experimentation, others are included for what they offer in terms of cultural depth and for their contributions to skateboarding culture as a whole, whether that be through graphics, video output or simple attitude.