Manufacturers started to experiment with more exotic composites and metals, like fiberglass and aluminium, but the common skateboards were made of maple plywood. The skateboarders took advantage of the improved handling of their skateboards and started inventing new tricks. Skateboarders, most notably Ty Page, Bruce Logan, Bobby Piercy, Kevin Reed, and the Z-Boys started to skate the vertical walls of swimming pools that were left empty in the 1976 California drought. This started the "vert" trend in skateboarding. With increased control, vert skaters could skate faster and perform more dangerous tricks, such as slash grinds and frontside/backside airs. This caused liability concerns and increased insurance costs to skatepark owners, and the development (first by Norcon, then more successfully by Rector) of improved knee pads that had a hard sliding cap and strong strapping proved to be too-little-too-late. During this era, the "freestyle" movement in skateboarding began to splinter off and develop into a much more specialized discipline, characterized by the development of a wide assortment of flat-ground tricks.

In the early 1970s skateparks hadn't been invented yet, so skateboarders would flock and skateboard in such urban places as The Escondido reservoir in San Diego, California. Skateboarding magazine would publish the location and Skateboarders made up nicknames for each location such as the Tea Bowl, the Fruit Bowl, Bellagio, the Rabbit Hole, Bird Bath, the Egg Bowl, Upland Pool and the Sewer Slide. Some of the development concepts in the terrain of skateparks were actually taken from the Escondido reservoir.[27][28][29] Many companies started to manufacture trucks (axles) specially designed for skateboarding, reached in 1976 by Tracker Trucks. As the equipment became more maneuverable, the decks started to get wider, reaching widths of 10 inches (250 mm) and over, thus giving the skateboarder even more control. A banana board is a skinny, flexible skateboard made of polypropylene with ribs on the underside for structural support. These were very popular during the mid-1970s and were available in a myriad of colors, bright yellow probably being the most memorable, hence the name.


The Powell Golden Dragon 2 Skateboard is an affordable and complete skateboard for the beginners and also for the advanced skaters.  It has high-rebound, hand-cast polyurethane wheels to give you a great roll and grip.  It measures 7.5 inches wide with a colorful screen-printed bottom.  It is made in China and has an average rating of 4.2 on Amazon.
Girl Skateboards is the foundation of all the other brands under the Crailtap umbrella (Royal Trucks, Chocolate Skateboards, Lakai footwear etc) and was established by Mike Carroll and Rick Howard during a mass exodus of pro skaters from Steve Rocco’s brands (Plan B, Blind, 101, World Industries) reputably inspired after arguments of wheel sales royalties.
Illegal skating includes jumping over cracks or obstacles on the sidewalk (rather than stopping, picking up one’s board and walking around the obstacle), turning, riding over certain public property and any stopping maneuver that could be considered a trick. A ticket for skateboarding is a traffic violation, but skaters are more commonly cited for vandalism or trespassing—misdemeanors that stay on a skater’s record and usually carry a fine or a sentence of 40 hours of community service, or both.
One European brand steady killing the game is France’s own Magenta. What Palace is for London, Magenta is for Paris, representing what it means to make do with skating in a place where you will literally get kicked out of everywhere just for riding on your board. With a recent collaboration with adidas, Magenta has shown they can turn their niche image into something with mass appeal, so long as the world will pay attention. Skateboarders already know the brand for their quick-footed style of skating and their unique illustration style, but they should know Magenta for their conscious effort to make sure we all are enjoying the pleasure and the freedom skateboarding brings.
Huf has come a long way since its humble beginnings slinging the best sneakers and streetwear in San Francisco's Tenderloin District. Keith Hufnagel and his team quickly outgrew the boutique niche and have becomea full blown skate apparel and footwear brand. Today Huf has a stacked teamed (including low-key legends like Joey Pepper, who recently got a signature shoe), a wildly popular range of product (weed socks, anyone?), and some hefty celebrity co-signs.
OneHype Designer Board has its own one of a kind design which is placed through a heat transfer and not a sticker. It measures 8″ W x 31″ L. It’s ready to use. It includes shock pads, durable wheels, smooth bearings, colored bushings, and aluminum trucks. The 7 ply maple deck is tough and can handle several impacts. This board is suitable for all ages.
SkateXS makes skateboards for kids, but the quality of the product is just as high as skateboards for adults. Many parents report their children being incredibly satisfied with the product. The reviews are 90% positive, and it’s easy to see why so many family members and friends turn to buying this skateboard for their young ones. Read on for more to consider when buying a skateboard for beginners.
Longboards excel when covering longer distances on roads and bike paths or for “bombing” hills. The wider trucks and wheelbase provide superior stability, and larger wheel options help retain speed for faster commuting. Still, longboards are less responsive than shorter boards and don’t always have kick tails, making them less functional in tight spaces.
Since Fine Artists Vol 1, Element have released numerous videos including Element – Third Eye View (1998), Element – Rise Up (2005) which focused on the brand’s European team, and more recently, the short video Element – Rise and Shine (2011) focusing on Element team rider Nyjah Huston. Element’s video output is unparalleled with releases from all over the globe – most of which can be found via the link above..
In sports like football, cricket and swimming, you have to follow certain rules and adopt a particular style in order to perform well. But that’s not the case with skateboarding. This sport allows skaters to enjoy their unique style without any restrictions. From drills to cruising and rail tricks, you can do whatever you like in your very own created style. Everyone skates in their own style according to their convenience.
The skateboard industry is as colorful and competitive as the sport itself.  It’s no surprise that the top skateboard brands all take on that daring, free expression and edgy creativity that is quintessential to the skateboarding community.  But it’s not all fun and games — it takes a lot more than producing wooden decks with dope graphics to make it to the top.  It takes hands-on dedication and genuine passion for the sport.
I have a dream to hook up some of the world’s best skateboarders, and make everybody know and love this awesome sport! So, in the summer of 2017, I launched SkatesZone with little more than a dollar and want it to become an interesting place for all skaters where you can find a plenty of skateboards information, tips & tricks, instructions, and more.
You can get a lot of advice (and maybe too many opinions) from fellow skaters. Some of it might not be as informed or educated as a shop owner's (and some might be flat-out bad advice), but it should at least be sincere! If you don't have a local skate park, or are too uncomfortable to walk up to people and ask, you can also ask around on a skateboarding forum. People there will be more than happy to tell you what they think about deck brands.
The most common shape in skateboarding is called a popsicle shape. It has a curved tail and nose and features concave, which gives the board it’s shape. New skateboarders looking to learn how to carve, push, ollie, kickflip, and grind boxes, ledges, and rails should start with a popsicle shape. If you’re interested in knowing, we explain selecting a board by width, riding style, and board shape in the skateboard decks section of the buyer’s guide.
A skateboard is fundamentally a sum of its parts. If you want a good skateboard, you’ll want each component to be high quality. We’ll take a look at each part of a skateboard and talk about what quality means for the that component. We’ll try to give tips on how to spot a high or low quality implementation of that component and then we’ll share how SkateXS Skateboards measure up.  
Rarely you make notice your deck to lose concavity or flatten over time.  Although this isn’t very common, it’s typically due to water damage and is a sign of many other problems.  Wooden decks are not meant to get wet and they will warp, crack, and break if they get soaked.  It’s pretty simple and straightforward  to avoid this problem.  Keep your skateboard in a dry place, and don’t skate in the rain or through puddles.  Skating through water will also destroy your bearings, if deck warping and breaking wasn’t a good enough reason for you to not do it.
It comes with a plastic board deck, which is small in size, making it ideal for riders who need a really sturdy skateboard. It is more suitable for both experts and beginners who want to learn new tricks in skateboarding. The fact that it is stable and small makes it good for kids, too. It promotes ease in riding and controlling it in a crowded street. This complete skateboard is lightweight, too, allowing you to carry it almost everywhere.
The Moose Blank Skateboard deck is a made with a 7-ply composition and features Canadian Maple wood. The board is 8.25 inches in length, but Moose Blank offers shorter boards as well, fitting men and women of just about any size and skill. The deck itself has a modern concave, making turning a breeze for beginners and pros. The nose and tail are particularly steep for tricks and “perfect for shredding,” says Blank Moose. Although this board is 100-percent blank, Moose Blank offers stains and dips for monochromic board designs as well. There are also Moose Blank sets for sale, which provide a set of blank decks at a discount.

Another bonus of shopping at an actual skate shop is that you get to see what the boards look like in person. Most skate shops will have a cool wall of boards, and it's fun to just stand there and look at all the graphics. If one jumps out and grabs you, then you can ask the shop owner about the brand, and whether it's a good one. There's nothing wrong at all with buying a skateboard deck because you like the graphics!
In the past decade, I have begun seeing the emergence of skate decks being totally or partially made from carbon fiber or other metal materials instead of solely wood.  These decks typically last longer than regular wooden decks and aren’t prone to chipping or breaking like most made from wood.  The drawback to these materials is that they tend to feel “stiffer” than traditional wooden decks and experienced skaters may feel they are heavier and harder to do tricks on.  Carbon fiber decks are also more expensive, but this additional cost may be worth it if you tend to break decks easily.  Some brands also offer warranties against breakage under normal conditions for carbon fiber decks if you are worried about breakage.
Velocity Boards Retro Skateboards is a complete 22″ Banana Skateboard.  It includes 6″ Lightweight Aluminum Trucks, High-Speed ABEC-7 Bearings, High-Quality Wheels & Bushings and Hardware.  It has a Unique Textured Waffle Pattern on Deck and is designed for Maximum Grip.  The Deck measures about 22 x 6 x 4″.  It has a 6″ Truck Axle and a 3″ Truck Hanger.  It has a maximum weight capacity of  176 lbs. (80 kgs.).  It is great for all skaters who are 6 years old and above.  It has an Amazon rating of 4.7.
Similar to sandpaper, grip tape, or “grip” as it’s commonly referred to, is applied to the top of your deck for traction. Grip gives you the friction you need to perform tricks such as ollies and kickflips. Not all grip tape is the same however. Each brand's products perform differently, so you may want to experiment with different brands to get a feel for what you prefer.
Where do you live? I forget that this is a global community. If you're US/CA I would recommend going to a local shop and testing some out and see what you like the most cause a Girl will be different from an Almost from an Expedition in very little ways that might turn you off the board shape more than their graphics/team. I would get between a 8" and 8.25" deck though.
Punisher Skateboards Warphant measures 31 x 7.5 inch.  It has a 9-Ply Maple Black Board with Concave Deck and Double Kick Tail.  It comes with ABEC-3 Bearings, 5-inch V-style Heavy Duty Alloy Trucks, and Bases.  It uses 54 x 36 mm PU injection molded wheels and PE Riser Pad with PU Cushion and Punisher Logo.  It is perfect for learning and doing tricks.  It is best suited for riders who are 8 years old and above.  It has a 5 rating on Amazon.

These guys are unabashedly all about London and the party boy lifestyle. The self-aware attitude they carry themselves with shines in the corresponding product copy on their website—it’s contagious and makes you want a piece of it.  Everyone from A$AP Rocky to Drake, and even seemingly out-of-touch Jay Z has been seen rocking the gear, and it’s understandable why. Palace’s design team, which includes Fergus Purcell of Marc Jacobs, have created an image that’s been exclusive and dope from its inception, and they’ve yet to break that streak. Who else could follow up a dope adidas collaboration with an excellent pair of penny loafers?


As it eventually became more apparent that skateboarding had a particular identity with a style of shoe, other brands of shoe companies began to specifically design skate shoes for functionality and style to further enhance the experience and culture of skateboarding including such brands as; Converse, Nike, DC Shoes, Globe, Adidas, Zoo York and World Industries. Many professional skateboarders are designed a pro-model skate shoe, with their name on it, once they have received a skateboarding sponsorship after becoming notable skateboarders. Some shoe companies involved with skateboarding, like Sole Technology, an American footwear company that makes the Etnies skate shoe brand, further distinguish themselves in the market by collaborating with local cities to open public Skateparks, such as the etnies skatepark in Lake Forest, California.[83][83][84][86][87]
Amongst the chaos of trends and contrived images GOOD Skateboards remains true to the roots. The preach and practice of the philosophy that it's not WHAT you do but HOW you do it. Spear headed by legendary pro Tosh Townend, GOOD Skateboards is that much needed breath of fresh air in an industry polluted by heartless money fiends and exploitative mind sets. Made in the USA and as Grass Roots as you could possibly get Tosh and good friend Tommy De Maria bring to you something straight from the core of skateboarding; actual skateboarding. No egos, no attitudes; GOOD Skateboards' roots run deep with an utmost respect for skateboarding's past and a rich understanding of skateboarding's history. Support GOOD and support skateboarding in the hands of skateboarders.
“I think it’s just also like, people want to have fun. If you watch say those types of Street League type of skateboarders, who are super amazing skateboarders that can push these crazy tricks down rails and stairs, like switch tre down fifteen stairs or whatever trick they do — it’s amazing to see that level of skating, but if you are an average Joe living in a small town you’re just like, “I’m never going to be able to kickflip back noseblunt twenty-stair rails”. That’s always the biggest trick. If you ask me it’s like, “What videos do you really enjoy?” The videos that you can some how relate to. Like, “Hey, I could actually do some of these tricks.” You connect to it and you feel like you can picture yourself being a part of the whole thing. When people put out these amazing super stunt skateboarding videos, pushing it to the furthest level possible, that’s rad in one sense, but to me personally as a kid I could never in my wildest dreams believe that I could do that too. I respect it. I understand it. But does it make me want to go skate? No.”
Lovenskate have produced a number of full-length videos throughout the 16 years of their existence, including the 2015 release Lovenskate – Smorgas’board although more recently they have followed the direction of skate media in general and concentrated on releasing shorter, rider-specific clips such as Jordan Thackeray’s Welcome clip and more recently the Batch Capture series.
This is an interesting option because it is basically a hybrid between a blank and pro skateboard deck.  It’s like a pro board in that is has a “brand” and logo, but the cost is similar to blanks and they don’t sponsor the same quantity and caliber of professional skaters that other pro brands do.  While the logo is really cool and the rest of the parts seem to be high quality, you may not get the same brand recognition with Punisher as you would with other brands like Element or Toy Machine.  This deck is also 7.5″ which makes it a great choice for a younger beginner.  This is the perfect beginner skateboard for someone who doesn’t really care about the brand name, but still wants the style and performance of an above average professional skateboard.
Obviously, price is an important consideration for most people when looking to buy anything.  For skateboards, the price of the board is generally a good indicator of quality.  In general, most pro branded skateboards that are made up of high-quality parts are in the $70-$100 range.  You can usually find pro branded decks with average parts for $50-$70, and you can find blank options between $25-$50.  I wouldn’t touch anything under $25, as it is likely poor quality and very prone to breakage.
Huf has come a long way since its humble beginnings slinging the best sneakers and streetwear in San Francisco's Tenderloin District. Keith Hufnagel and his team quickly outgrew the boutique niche and have becomea full blown skate apparel and footwear brand. Today Huf has a stacked teamed (including low-key legends like Joey Pepper, who recently got a signature shoe), a wildly popular range of product (weed socks, anyone?), and some hefty celebrity co-signs.
The first skateboards started with wooden boxes, or boards, with roller skate wheels attached to the bottom. Crate scooters preceded skateboards, having a wooden crate attached to the nose (front of the board), which formed rudimentary handlebars.[6][7][8] The boxes turned into planks, similar to the skateboard decks of today.[9] An American WAC, Betty Magnuson, reported seeing French children in the Montmartre section of Paris riding on boards with roller skate wheels attached to them in late 1944.[10]
Founded by the original technical street skaters Daewon Song and Rodney Mullen, Almost Skateboards always pushes the envelope with fun, artistic cartoon graphics paired with high quality materials.  Almost was one of the first brands to implement carbon fiber layers to their decks in the “Impact” deck line to increase the deck’s life and better maintain its shape.
×