Element, based out of Irvine, CA, is one of the cool skateboard brands today. They came in first on our list due to their quality boards, sustainable practices and the affordability they offer customers. They’re an environmentally responsible brand who creates their boards without causing any environmental damage. The Element team behind the company is comprised of a group of professional skateboarders who interact with a strong belief in the Element brand. They not only offer great products, but stand for an open minded and active lifestyle and have become one of the best skateboard brands in the world.
Here's a list of the best skateboard truck brands (read about Trucks in the Skateboard Dictionary). Trucks can be expensive, and picking out the right set of skate trucks can seem tough. But, if you get a pair of trucks off of this list, you should be good. There are other brands that are good quality too, but each of these brands has something that helps it to really stand out. These aren't put in any particular order.
In the skateboarding industry, brands tend to come and go with ease. It’s rare for them to stay in the spotlight for any substantial amount of time. But the constant reshuffling of the deck (pun not intended) allows for a rotation of new brands to make a name for themselves. Whether they’re known primarily for their skateboarding parts essential to the craft (like decks, trucks, wheels, and shoes) or for their apparel and accessories, the skateboarding universe has been expanding ever since the sport caught the attention of the mainstream in the late ‘90s. Everyone may remember exactly where they were when Tony Hawk landed the 900° on national television, but the world of skateboarding brands is much larger than just that and more expansive than you may realize.
Skateboards, along with other small-wheeled transportation such as in-line skates and scooters, suffer a safety problem: riders may easily be thrown from small cracks and outcroppings in pavement, especially where the cracks run across the direction of travel. Hitting such an irregularity is the major cause of falls and injuries.[102] The risk may be reduced at higher travel speeds.
While the skateboard has a lot of moving parts, one's safety, comfort, and ease to learn new skills and perform tricks are all of equal importance. For this reason, choosing the right type of deck and wheels should be two of the first considerations, as the board's shape, material construction, and wheel makeup will all have a significant impact on your ability to control the equipment and maintain good aerodynamics. Additionally, the width of the deck is important, so one must take their height, shoe size, and style of riding into account in order to ensure the deck offers as much support as possible, regardless of application.

This deck is 6-inches-by-22.5-inches with that classic cruiser shape. The board is made with 6-ply bamboo and maple construction, which is lightweight, flexible, and eco-friendly. Bamboo Skateboards claims this board has a turning radius not seen in most mini decks. The small, blank deck is heavy duty and durable in a way not all mini cruisers are. This non-carbonized board is ready for you to slap on the grip tape and artwork you want and then get riding.
The Element Quadrant #14 board is 8-inches wide and 31.75-inches long, from nose to tail. This deck features a bare top that needs grip tape and a design on the bottom with four quadrants featuring the Element symbol in alternating red and black backgrounds. The wheelbase between the trucks is just over 14 inches while the nose is 7 inches and the tail is 6.325.
In 1976, skateboarding was transformed by the invention of the ollie by Alan "Ollie" Gelfand. It remained largely a unique Florida trick until the summer of 1978, when Gelfand made his first visit to California. Gelfand and his revolutionary maneuvers caught the attention of the West Coast skaters and the media where it began to spread worldwide. The ollie was adapted to flat ground by Rodney Mullen in 1982. Mullen also invented the "Magic Flip," which was later renamed the kickflip, as well as many other tricks including, the 360 Kickflip, which is a 360 pop shove-it and a kickflip in the same motion. The flat ground ollie allowed skateboarders to perform tricks in mid-air without any more equipment than the skateboard itself, it has formed the basis of many street skating tricks. A recent development in the world of trick skating is the 1080, which was first ever landed by Tom Schaar in 2012.[73][74]
Skateboarding might be a game but it teaches the biggest lessons of life. It helps kids to accept others being better than them and encourages them to put more effort to progress and be the best. When they ride in the park with people who are expert and know impressive drills, they come to learn that practice and efforts make a man perfect. Skateboarding also teaches kids to control and focus.
The Landwalker 22″ Complete Skateboard has a sturdy 7 layer Canadian maple deck. It’s best for downhill, U table and slider because of its enormous stability. This board is best for teens and adults. It comes with Abec 7″ Bearings, PU wheels, Black Grip Tape, and hardware. It measures 79 x 20 x 10 cm. This board is an awesome gift for Christmas or Halloween.

Krux make some great trucks. Krux makes "downlows" trucks, that have a lower hanger and kingpin than even Grind King. However, you will need a hex tool to adjust them. The Krux IIIs with Topless System are even lighter, with special bushings that feel broken in from the start, but that also provide a faster snap back into position. Krux trucks are light and low.
Remember, no skateboard lasts forever. Each board has different lifespan, regardless of the brand. Flip tends to break the easiest if you skate a lot. Almost and Girl boards usually have the longest life span. If you want a board that lasts really longer and you have the money, go for the Uber boards. Almost has three Uber boards signed by Mullen and usually start at $70 just for the deck, and completes range from $150-$250 just for the basic. If you want the perfect board, then you are talking a lot of money.
Tensor trucks are the most highly engineered skateboard trucks on the market. Tensor trucks are like the Cadillac of trucks and have the brilliance of skateboarding legend / engineer Rodney Mullen as a driving force. Tensor trucks come in both standard and low designs, and should work excellently in most skateboarding situations. Sort of a perfect all-round well-built skateboarding truck.
Presenting to you, the next in line for top skateboard brands; Powell Peralta. Established back in 1978, Powell Peralta is perhaps one of the most well-known names in the skateboarding world. It was launched at a time when skateboarding was gaining traction and Powell Peralta rose to prominence. Powell Peralta is also known for featuring the Bones Brigade, which was a team featuring the top players of that time. Peralta left the company in between but both the partners reunited to create magic in the skateboarding community.
The Californian brand has performed nothing less than a triple flip and catapulted itself from #11 exactly into the centre to #8. This isn’t only nice for us, but also for skatedeluxe team rider Denny Pham, who literally stands on Flip. How hard you can skate these decks is also shown by his team colleagues Arto Saari, Louie Lopez, Curren Caples and Co. Price: from 64.99 € | 55.00 GBP!
Freedom Plaza has become a popular location for skateboarding, although the activity is illegal and has resulted in police actions.[5][115] A 2016 National Park Service management plan for the Historic Site states that skateboarding has damaged stonework, sculptures, walls, benches, steps, and other surfaces in some areas of the Plaza.[5] The management plan further states that skateboarding presents a persistent law enforcement and management challenge, as popular websites advertise the Plaza's attractiveness for the activity.[5] The plan notes that vandals have removed "No Skateboarding" signs and recommends the replacement of those signs.[5]

Severe injuries are relatively rare.[103] Commonly, a skateboarder who falls suffers from scrapes, cuts, bruises, and sprains.[103] Among injuries reported to a hospital, about half involve broken bones, usually the long bones in the leg or arm.[102] One-third of skateboarders with reported injuries are very new to the sport, having started skating within one week of the injury.[102] Although less common, involving 3.5–9 percent of reported injuries, traumatic head injuries and death are possible severe outcomes.[102]


Covering multiple countries all over the world, Skatro is widely received as one of the top mini-cruiser suppliers that are in existence. Starting from a very small office and humble beginnings, Skatro brand was determined to provide excellent care and respect to their clients while maintaining a quality product that is both mechanically sound as well as financially viable.

The laws for skateboarding helmets vary from state to state. Many states require that skaters wear a helmet under a certain age, and some states like California make all skaters under 18 wear a CPSC Certified helmet at all times. CSPC skateboard helmets usually have an EPS protective liner that meets the safety standards for skateboarding. Make sure you check your state's regulations before ordering.

FTC has grown from being the staple skate shop of the Bay Area to being a respected brand pushing skateboarding across the globe. Their SF flagship sits in the famous Haight Ashburry district, always attracting visitors and giving them a look into what skateboarding is really like in this day and age. FTC will have you covered in their own gear, and will also always be pushing the next big thing in their shops, and they never make a bad call.
OneHype Designer Board has its own one of a kind design which is placed through a heat transfer and not a sticker. It measures 8″ W x 31″ L. It’s ready to use. It includes shock pads, durable wheels, smooth bearings, colored bushings, and aluminum trucks. The 7 ply maple deck is tough and can handle several impacts. This board is suitable for all ages.
This deck is 6-inches-by-22.5-inches with that classic cruiser shape. The board is made with 6-ply bamboo and maple construction, which is lightweight, flexible, and eco-friendly. Bamboo Skateboards claims this board has a turning radius not seen in most mini decks. The small, blank deck is heavy duty and durable in a way not all mini cruisers are. This non-carbonized board is ready for you to slap on the grip tape and artwork you want and then get riding.
This past year, they dropped the insant classic VHS series of decks, playing off of the nostalgia of old blank VHS tapes used to film back in the 90’s, creating a high demand for restocks in skate shops across the world. This series almost singlehandedly brought them back in the forefront of skating to the world beyond New York, and we can only wait to see what they’ll do next.
“We make 38 different proprietary shapes, and what is more important than the shape is the leverage that we design on each board. The mold we use, and where we drill on each mold is the magic. Do all popsicles ride the same? Of course not. We are a step beyond almost everyone with that because I am nerdy about how stuff rides and performs. This is what our riders skate and love, we aren’t trying to capture some demographic.
Hi Everyone! My name is Pete (yes, I’m a real person who lives in a cornfield just outside of Buffalo, NY – well, my house is in the middle of a cornfield!). As a former collegiate athlete in Iowa, I’ve played varsity basketball, volleyball and soccer. I also happen to be an outdoor adventure fanatic who’ll do whatever it takes to never miss my annual week-long wilderness canoe trip in the Northern Ontario wilderness. Sports equipment has come a long way over just the past few years, and I’d love to share with you the latest (and most competitively priced) products that will save you many of the frustrations I’ve dealt with over the years! Please feel free to cruise the site and drop me a line on the contact page if you have ideas for improvements or anything else!
Chocolate Skateboards is a skateboarding company distributed by Crailtap. Following on the heels of Girl, Chocolate was launched in 1994 by Mike Carroll and Rick Howard and is known by its Chocolate hearts logo. Their skateboards are made of durable seven-ply maple. Graphics are also important to the Chocolate brand, and you will find things such as classic cars or cartoons. You can find complete Chocolate skateboards with deck, trucks, wheels and bearings, customized decks, accessories, and apparel. The Chocolate team consists of Vincent Alvarez, Kenny Anderson, Chico Brenes, Justin Eldridge, Jesus Fernandez, Chris Roberts, Elijah Berle, Stevie Perez, Raven Tershy, and Jerry Hsu.
You guys must have noticed that we have an absolute adoration for boards that not only ride smooth but are also easy on the eyes. Plan B covers the graphics of skateboards quite well, with its own unique style and color schemes. Some of the examples of their visual masterpieces are, the Riot Cole (with the Plan B logo embedded in different art schemes) and the Anatomy Cole 8 (with individualistic graphics).
This is the way most serious skateboarders buy new skateboards.  In some cases they choose different brands for the wheels, bearings, trucks, deck, and hardware and customize it to their own unique style and preferences. The benefit to buying part like this you can replace only certain parts that are worn down and you have more control over each aspect of your skateboard.  I recommend this approach to intermediate and advanced skateboarders who want to experiment with different brands and styles.   However, if you are looking to try skateboarding for the first time or buy it as a gift for someone else I would recommend buying an already assembled complete skateboard.
Ever notice small vertical or horizontal cracks through your grip tape or by the hardware of your trucks?  These are called stress or pressure cracks and are basically mini fractures of your skateboard deck that typically are seen in the areas of the deck that withstand the greatest impact (around the trucks).  A few pressure cracks is generally no big deal and you won’t even notice them while skating, but they can compound and grow larger and make your deck lose “pop” and increase the chance of snapping.  To avoid pressure cracks, you cant use riser pads underneath your trucks to reduce the level of impact your deck takes.  You should also avoid over tightening your hardware and storing your skateboard in a very humid place as both of these practices can also make your board weaker and more susceptible to pressure cracks.
Toy Machine is an Ed Templeton company and one of the best skateboard companies of its time. Ed is an Orange County original skater and developed the board he wanted to skate on, thus creating the Toy Machine Brand. Though the Toy Machine team has seen many changes, it has always held onto professional skaters that can provide insight in the latest needs of boards. Toy Machine skateboards are known for their signature monster graphics, which have made them a top skateboard brand.

Welcome is doing everything the way that people would probably tell you not to when it comes to how they run their board company. With no real full-length project out since it became a company, and with no pros to name, but boasting a full roster of official riders, Welcome is as unorthodox of a skate company as it gets. They don’t even make a single board in the traditional popsicle shape most boards are made today.


Next, you’ll need to look at the deck material. Decks are typically wooden or plastic, but they may also be made of materials like carbon and fiberglass. Plastic boards, like the pennyboard, are more affordable, and still very durable, but many adult riders find that they can look a bit like a child’s toy rather than a “real” skateboard. Wood is the most popular choice for most skateboards, although if you want to invest in the pricier fiberglass or carbon options, you’ll get a very good quality deck for your money.
First off, it’s important to decide what you will be using your skateboard for and what you will be doing with it. That’s why it’s important to ask a few key questions: Are you going to be using it every day? Is it for a new hobby? Is it for competition practice? What surface will you be skating on? Will you be partaking in park skating, or street skating?
The skateboard is directional, so if you’re skating switch the tail end will be forward, though, it makes for an easy switch heel flip. The deck itself is plastic. The skateboard dimensions are 3x6x22 inches. The wheels are 59MM urethane custom Skatro brand wheels. The bearings are ABEC 7 Skatro bearings. The trucks are 3 inches aluminum trucks. The board itself is only a light 4.7lbs and comes in one color.
The ENJOI line of skateboards is made to professional standards, which means that not only are you getting a durable ride, but you’ll also get a skateboard made to handle a lot of situations. You can ride this board on the street, at the skate park, on trails, and more. These decks are made with a very consistent method that is ideal for trick riding, especially.
Are you on a hunt for the best skateboard on the market today? Then you are in the right place as this comprehensive article is designed to give you information about skateboarding and types of skateboards in general. By learning about the different types of skateboards and what each one can do, figuring out what works for you the best is a lot easier.
Following Jason Dill and AVE leaving long time sponsors Alien Workshop back in 2013, Dill’s 13-year-old Fucking Awesome brand, which was formerly a clothing brand, became a board brand and began to add riders such as Dylan Rieder (RIP), Gino Iannucci, Jason Dill, Kevin Bradley, Nakel Smith, Sean Pablo, Sage Elsesser, Tyshawn Jones and Aiden Mackey.
×