Skate graphics have often incorporated blood, guts, and gore into board and T-shirt designs, but few brands render gnarliness quite as well as Heroin Skateboards. It's no surprise that a brand founded by artist Mark “Fos” Foster would have such tight art direction. Fos has a loose, low-fi handstyle that can be see in much of the brand's designs, and the delinquent band of team riders and their antics are a perfect embodimentof whatever “image” Fos is after.

There are three types of skateboards: classic, retro, and snake. Classic boards are the most common and what you generally find when you go shopping. Retro boards are longer and have larger wheels. They are great for skating long distances but inferior to classic boards for doing tricks. A snake board is not appropriate for kids since it requires intensive balance and has only one wheel.
It was a slow start for 3D, who had Alex Olson bail on them when they first started out before they could even get their first run of boards inside of shops, leaving the company at just two riders: Brian Anderson and Austyn Gillette. Now, due at least partially in part to Brian Anderson’s solidified status as a skateboarding legend, 3D has taken off and become an established brand that’s not taking itself too seriously, but still putting on for skateboarding. 3Ds first video offering, featuring amateur rider Tom Karangolov in a dreamy pink colorcast world, has even showed that they’re looking to shake things up in the stale footage side of skateboarding.

Welcome is doing everything the way that people would probably tell you not to when it comes to how they run their board company. With no real full-length project out since it became a company, and with no pros to name, but boasting a full roster of official riders, Welcome is as unorthodox of a skate company as it gets. They don’t even make a single board in the traditional popsicle shape most boards are made today.
The problem with wheel bite is that it tends to stop the motion of the wheels. This can result not only in a bad wipeout for the rider but also damage to the wheels. With the help of the riser pads, it is easier for you to preserve the deck of your skateboard since these pads can reduce the tendency of having stress cracks on where the trucks and deck meet.
I rode for them as a ‘Amateur’ skateboarder in ‘79-’80, and they, at that time, had one of the Best boards out on the market, made of Fiberglass in a torsion box, with a foam core, and urethane ‘bumpers’ all around. I still have that board, and one set of C-70 Reds from then. I skated that gear hard, for many years, too. I still own 6–7 full sets of “krypto’s” for skateboards, and 8 that’re on quad-roller-skates. Great wheels, and they’re still in use.
The Skatro Mini Cruiser Skateboard includes Abec 7 Skatro Bearings, 59MM Urethane Skatro wheels, and 3-inch lightweight aluminum trucks.  The Skatro Flexy Technology ensures optimal flex on every board. Skatro outperforms most of the leading brands and it has an amazing value.  You can take this board on the subway, plane, train, and even on the bus.  It includes a color matching T-tool.  It has the best rating of 4.8 on Amazon.
It is safe to say that Zero’s identity as a skateboard brand was built primarily on its skate videos which began in (1997) with Thrill of It All, there followed Misled Youth (1999), Dying to Live (2002), New Blood (2005), Strange World (2009), Cold War (2013) and No Ca$h Value (2014) with each video upping the ante in terms of the levels of danger involved.
Skateboarding is thrilling as well as a very dangerous sport if not taken seriously. That’s why whenever you plan to ride a skateboard you must choose the best skateboard for a beginner. Being a beginner in skateboarding you get plenty of challenges in discovering your personal riding style. You can minimize various hassles by having the best skateboard for a beginner. For this reason, we have compiled a great in-depth guide for beginners to help them get started with this amazing journey of skateboarding. Making the best choice as a beginner can beat the odds of failing to ride or not having the best experience in skateboarding. Read on to find out.

By raising £790,000, the Long Live Southbank[70] initiative managed in 2017 to curb the destruction of a forty years old spot in London due to urban planning, a salvaging operation whose effect extends beyond skateboarding. The presence of a designated skating area within this public space keeps the space under nearly constant watch and drives homeless people away, increasing the feeling of safety in and near the space.[71] The activity attracts artists such as photographers and film makers, as well as a significant number of tourists, which in turn drives economic activity in the neighborhood.[72]


SkateXS has been widely known to be the best brand for kids that are looking to advance their skateboarding skills. These skateboards have been designed with children in mind. That’s why there are many customizable features that you can pick when purchasing this product. If you are an avid skateboarder and want to introduce your kids to skateboarding, or just a parent that has been hearing about skateboards for weeks now, you can safely pick this product by SkateXs to help your kids safely advance in their skateboarding skills.


SkateXS makes skateboards for kids, but the quality of the product is just as high as skateboards for adults. Many parents report their children being incredibly satisfied with the product. The reviews are 90% positive, and it’s easy to see why so many family members and friends turn to buying this skateboard for their young ones. Read on for more to consider when buying a skateboard for beginners.

Since Fine Artists Vol 1, Element have released numerous videos including Element – Third Eye View (1998), Element – Rise Up (2005) which focused on the brand’s European team, and more recently, the short video Element – Rise and Shine (2011) focusing on Element team rider Nyjah Huston. Element’s video output is unparalleled with releases from all over the globe – most of which can be found via the link above..


Remember, no skateboard lasts forever. Each board has different lifespan, regardless of the brand. Flip tends to break the easiest if you skate a lot. Almost and Girl boards usually have the longest life span. If you want a board that lasts really longer and you have the money, go for the Uber boards. Almost has three Uber boards signed by Mullen and usually start at $70 just for the deck, and completes range from $150-$250 just for the basic. If you want the perfect board, then you are talking a lot of money.
Velocity Boards Retro Banana Skateboard is a 22″ Complete Board Set with 6″ Aluminum Trucks, ABEC-7 Bearings, High-Quality Wheels, and Bushings. It is designed for maximum grip. The Deck measures about 22 x 6 x 4″. The truck Axle has a Width of 6″ and the Truck Hanger has a Width of 3″. It has a maximum load capacity of 176 lbs. (80 kgs.) It is best for skaters who are 6 years old and Up. It has an average Amazon rating of 4.7.
Element Skateboards are also one of the most popular and best skateboards in the world of boarding. If you choose to purchase it, you will get high-quality skateboards that will stand the test of time. The best thing about them is environmental friendliness that they promote along the way. Therefore, you will enjoy in Driftwood deck, which are much more affordable and lighter.

Bearings are standardized to fit in all kinds of skateboard wheels. All bearings will eventually get dirt and gunk in them which slows you down. Regular cleaning is recommended. Higher quality bearings will perform better, roll faster, retain more speed, and last longer when cleaned regularly. Some bearings come with bearing spacers or have spacers built into the bearing. These will fit in any wheel, but are not necessary for most types of skateboarding or longboarding.

Element is of the most mainstream brands in the industry today that has sponsored legends like Nyjah Huston and Bam Margera.  There are many pro decks to choose from with some amazing tribal designs and they have introduced a “featherlight” technology that allows Element to have some of the lightest boards on the market today.  Some may call Element “too mainstream” or “sellouts”, but at the end of the day, they produce quality products in a variety of artistic designs.
“We make 38 different proprietary shapes, and what is more important than the shape is the leverage that we design on each board. The mold we use, and where we drill on each mold is the magic. Do all popsicles ride the same? Of course not. We are a step beyond almost everyone with that because I am nerdy about how stuff rides and performs. This is what our riders skate and love, we aren’t trying to capture some demographic.
In the past decade, I have begun seeing the emergence of skate decks being totally or partially made from carbon fiber or other metal materials instead of solely wood.  These decks typically last longer than regular wooden decks and aren’t prone to chipping or breaking like most made from wood.  The drawback to these materials is that they tend to feel “stiffer” than traditional wooden decks and experienced skaters may feel they are heavier and harder to do tricks on.  Carbon fiber decks are also more expensive, but this additional cost may be worth it if you tend to break decks easily.  Some brands also offer warranties against breakage under normal conditions for carbon fiber decks if you are worried about breakage.

The first thing to consider is what kind of skateboarding you want to do. Do you want to skate your local skate park and learn tricks? Do you want something for commuting across town or campus? Or, would you enjoy charging down hills at high speeds? Take a look at the options below and note which features work well for the type of skating you want to do.
Skateboarding is an action sport which involves riding and performing tricks using a skateboard, as well as a recreational activity, an art form, a entertainment industry job, and a method of transportation.[1] Skateboarding has been shaped and influenced by many skateboarders throughout the years. A 2009 report found that the skateboarding market is worth an estimated $4.8 billion in annual revenue with 11.08 million active skateboarders in the world.[2] In 2016, it was announced that skateboarding will be represented at the 2020 Summer Olympics in Tokyo.[3]

However, the deeper the concave is, the less stable the board will be for beginners. If you are still gaining confidence on a skateboard, it is best to start with something less dramatic. A longboard is often completely flat, or nearly so, and that makes it better for cruising on a very stable surface. This is a great choice for riders who aren’t necessarily interested in learning tricks.


“They built the industry before they built their business,” said Denike who became one of the early product testers as a 15-year-old when he was approached by Novak and Shuirman in a skateboard park. “It was just raw entrepreneurial spirit. They took it from a fad to an actual business and, as a group, decided they were going to focus on growing the industry. If they were good businessmen, they would get a piece of that pie.”
There are three types of skateboards: classic, retro, and snake. Classic boards are the most common and what you generally find when you go shopping. Retro boards are longer and have larger wheels. They are great for skating long distances but inferior to classic boards for doing tricks. A snake board is not appropriate for kids since it requires intensive balance and has only one wheel.
The deck is expertly constructed with a vertically laminated bamboo core and bamboo veneer exterior, all attached with triaxial glass and epoxy as well as a course grip tape top. The grip tape is arranged in an unusual and stylish, yet functional, design. The 34-inch board features a 13-degree nose angle and an 18-degree tail angle. With its directional shape, you’ll easily be able to cruise on this board or pull a few tricks.
×