The smaller the wheel diameter, the easier it is to do tricks, because it makes the board sit closer to the ground. But beginners will definitely have an easier time controlling a board with larger diameter wheels. Think of the larger wheels as being akin to training wheels. If you don’t want your board to have “pop” as you are learning, you can choose softer wheels, all the way down to a 73a. They won’t let you go as fast, and you’ll have to push off more often, but they do make it more likely that your board will stay on the ground.
One of the earliest sponsored skateboarders, Patti McGee, was paid by Hobie and Vita Pak to travel around the country to do skateboarding exhibitions and to demonstrate skateboarding safety tips. McGee made the cover of Life magazine[21] in 1965 and was featured on several popular television programs—The Mike Douglas Show, What's My Line? and The Tonight Show Starring Johnny Carson—which helped make skateboarding even more popular at the time.[22][23][24] Some other well known surfer-style skateboarders of the time were Danny Bearer, Torger Johnson, Bruce Logan, Bill and Mark Richards, Woody Woodward, & Jim Fitzpatrick.
The Element Quadrant #14 board is 8-inches wide and 31.75-inches long, from nose to tail. This deck features a bare top that needs grip tape and a design on the bottom with four quadrants featuring the Element symbol in alternating red and black backgrounds. The wheelbase between the trucks is just over 14 inches while the nose is 7 inches and the tail is 6.325.
We have unfortunately seen low quality skateboards that even try to use plastic trucks (please avoid). However it can be really hard to spot a poorly made metal truck without skating it. Brand awareness can come into play here again. The manufacturers name should be marked on the trucks. A quality set of trucks (2 per board) could start out as low as around $30 and will go up from there. 

Huf has come a long way since its humble beginnings slinging the best sneakers and streetwear in San Francisco's Tenderloin District. Keith Hufnagel and his team quickly outgrew the boutique niche and have becomea full blown skate apparel and footwear brand. Today Huf has a stacked teamed (including low-key legends like Joey Pepper, who recently got a signature shoe), a wildly popular range of product (weed socks, anyone?), and some hefty celebrity co-signs.
Powell Peralta has gained increasing popularity in the 1980s, when skateboarding became an increasingly more sought-after action sports. Since then, they have been developing skateboards tailored to customers, taking reviews and critiques into consideration every time they were building a new model. The Powell Golden Dragon is a direct result of such careful consideration and tailored-modeling.
FTC was cool before there were skate and hype blogs around to tell you that they were cool. Mastermind Kent Uyehara built his brand from the back of a sporting goods shop into an international symbol of cool, with franchise locations in Sacramento, Tokyo, and Barcelona. FTC isn't just the go-to spot for skate gear in those cities-it's a full-blown brand that any skater would be proud to wear.
Radiate Ride Good Skateboards are made of 7-ply maple construction with epoxy resin glue. It features 356A heat-treated cast aluminum high performance 5.0 trucks with grade 8 kingpins and axles. The super high rebound 99A PU wheels with grooved running surface provide better traction and abrasion resistance. The Abec 5 high precision speed bearings offer precision performance and a smooth ride. It has an 80 grit durable color matched grip tape with transparency. It is completely assembled and ready to go. This product has a 4.3 rating on Amazon.
Moving on to our favorite pick from the Plan B series, Plan B Skateboard Complete Felipe Victory 7.6″ Tensor Assembled, suitable for all kinds of riders, but is an ideal skateboard for intermediate skateboard riders. The deck is made from 100% North American maple and measures 7,6 inches. Its wheels are 52mm TGM wheels which means it is excellent for both street and park skating. We also love its lightweight trucks and heavy-duty aluminium with grade 8 steel kingpins and axles plus the bushings (USA made) and pivot cups. The bearings are rated 5 on the ABEC scale.
Sizing plays an important role in the performance of any deck. A large majority range in size from 7.75" to 8.5" in width. These will provide a great platform for shredding any obstacle and will excel in street and skatepark environments alike. For those who prefer a smaller board, decks are offered down to 7.5" in width- benefiting people with smaller feet or the technical skater. Conversely, those looking for a wider board will enjoy our selection ranging up to 8.9" wide. Larger decks will accommodate those with very large feet, as well as offer an amazing experience for cruising and shredding large ramps and transitions.
Sending sincere thanks to everyone that supported us over the last decade – including team riders, fans, customers, photographers, filmers, & mags. Thanks to George & Juli Powell & everyone at Skate One Corp. who believed in us & helped facilitate our vision. Thanks most of all to Cara-Beth Burnside for whom without her influence, leadership, & no-bullshit-spirit none of this would have ever been possible.
The deck is expertly constructed with a vertically laminated bamboo core and bamboo veneer exterior, all attached with triaxial glass and epoxy as well as a course grip tape top. The grip tape is arranged in an unusual and stylish, yet functional, design. The 34-inch board features a 13-degree nose angle and an 18-degree tail angle. With its directional shape, you’ll easily be able to cruise on this board or pull a few tricks.
Last year, Element didn’t even make it to the top 3, but in 2016 it reached the top and therefore is our top skateboard deck brand on skatedeluxe! We can only congratulate! Even after 24 years the old hand of the skateboarding industry, which was founded in 1992, does not forget how to provide you with decks that push tears of joy out of your feet. What to expect for 2017? A big anniversary! Can’t wait for that! Get your new Element deck from skatedeluxe starting at 59.99 €| 50.00 GBP!
Founded by English freestyle skater, engineer and skateboarding entrepreneur Jeremy Fox in 1987 (Fox is also reputed to be the first person to import skateboard specific footwear ‘Pro-Keds’ into the UK) Deathbox in its heyday was one of only a handful of European brands that ever controlled enough market share to be a significant player in the skateboard industry.
In most cases, it is available in black but you can also find clear ones that are ideal for you if you want to show a specific logo. Another nice choice that you have is the die-cut grip tape, which works in displaying the color or design of the deck beneath it. Make sure to choose a grip tape at a size, which perfectly suits your skateboard’s deck.
James Haden is one of the owners of the Skateboarder community, together with Nash Gibson – his co-owner. He works as a full-time copywriter for a private company and also a true adventurer. He is an avid reader, writer, traveler, and extreme sports junkie. During his free time, he researches interesting content for their blog and continuously writes for their audience.
The Golden Dragon 2 can also reach very high speeds thanks to the smooth ride skateboard wheels that have been incorporated into the design. Many people report this skateboard to hold up very well, even after several seasons and years of use. This makes them perfect skateboards for adults and kids that are looking to use the board very regularly for practice purposes.

As it eventually became more apparent that skateboarding had a particular identity with a style of shoe, other brands of shoe companies began to specifically design skate shoes for functionality and style to further enhance the experience and culture of skateboarding including such brands as; Converse, Nike, DC Shoes, Globe, Adidas, Zoo York and World Industries. Many professional skateboarders are designed a pro-model skate shoe, with their name on it, once they have received a skateboarding sponsorship after becoming notable skateboarders. Some shoe companies involved with skateboarding, like Sole Technology, an American footwear company that makes the Etnies skate shoe brand, further distinguish themselves in the market by collaborating with local cities to open public Skateparks, such as the etnies skatepark in Lake Forest, California.[83][83][84][86][87]

Founded by the pro skateboarder Marc Johnson in the year 2000, enjoi has been on the market for over two decades now. They have since expanded, and started producing skateboarding accessories and clothing apart from just skateboards. Since then, they have adopted a panda as their logo. This logo is featured on most of their products and has quickly become the company’s trademark.


Without good grip tape, skaters have a tough time staying on top of their board. The main complaints about poor grip tape tend to be that it was never very grippy or lost its grip really quickly. Once again, we recommend trusting in name brands with years of experience supporting skateboarders. Unfortunately, if you are buying a pre-made complete skateboard, you probably won't have access to the brand name of the grip. 
×