A precursor to the extreme sport of street luge, that was sanctioned by the United States Skateboarding Association (USSA), also took place during the 1970s in Signal Hill, California. The competition was called "The Signal Hill Skateboarding Speed Run", with several competitors earning entries into the Guinness Book of World Records, at the time clocking speeds of over 50 mph on a skateboard. Due to technology and safety concerns at the time, when many competitors crashed during their runs, the sport did not gain popularity or support during this time.[36][37]
In the early 1970s, Frank Nasworthy started to develop a skateboard wheel made of polyurethane, calling his company Cadillac Wheels.[7] Prior to this new material, skateboards wheels were metal or "clay" wheels. The improvement in traction and performance was so immense that from the wheel's release in 1972 the popularity of skateboarding started to rise rapidly again, causing companies to invest more in product development. Nasworthy commissioned artist Jim Evans to do a series of paintings promoting Cadillac Wheels, they were featured as ads and posters in the resurrected Skateboarder magazine, and proved immensely popular in promoting the new style of skateboarding.
Remember the cool skate kids wearing Workshop tees in the '90s? Well you don't see too many of those these days, but AW is still one of the best “big” skate brands going. The team alone—featuring Supreme muse Jason Dill, tech-gnar wizard Anthony Van Engelen, and the most handsome guy on a board, Dylan Rieder—puts the brand in the top 10. And even though you might not associate legacy riders like Rob Dyrdek with anything cool at all, he pulled one of the most boss moves in all skate business history when he bought the brand that first sponsored him 20 years ago back from Burton (who bought the brand from Chris Carter in 2008) last year, so Workshop is once again skater-owned.
Quality wheels won’t mean much if you don’t have nice bearings which allow the wheels to spin freely on the axle of the skateboard truck. A quality set of bearings will spin well right away and actually get even better once broken in a bit. If quality bearings get dirty, they can typically be taken apart and cleaned relatively easily. A good set of bearings typically runs between $10 - $16.
There are a lot of good skateboard brands out there. For a start, you can check out this list of Top Skateboard Deck Brands, but there are piles of other brands out there that are great. There are local brands, brands from other countries, and brands that you or I have never heard of. Aside from a skateboard company's reputation for quality and good design, a brand is also a brand; that is, it comes with its own character and cred. You might like a brand simply for what it represents, whether that's the company's attitude or its team or its presence at the skate park. The first step in choosing a brand is getting out there and seeing what's available.   

The growth of the sport during this period can also be seen in sales figures for Makaha, which quoted $10 million worth of board sales between 1963 and 1965 (Weyland, 2002:28). By 1966 a variety of sources began to claim that skateboarding was dangerous, resulting in shops being reluctant to sell them, and parents being reluctant to buy them. In 1966 sales had dropped significantly (ibid) and Skateboarder Magazine had stopped publication. The popularity of skateboarding dropped and remained low until the early 1970s.[7][25][26]


Skateboards just aren’t what they used to be, and that doesn’t make Jim Greco, Baker and Deathwish OG, happy whatsoever. Greco started the company last year as an effort to bring back skateboard manufacturing to the USA from overseas in China, using the traditional silk screen ink transfer and hand shaping methods from the early days of skateboarding.


Wedding Rodney Mullen‘s decades of technical experience regarding board shaping, concaves and the technical minutiae of skateboard manufacturing, (along with his huge fame and celebrated status as the father of modern street skating), with Daewon’s irrepressibly enthusiastic persona and supernatural skateboard talents, Almost was, from the outset, a brand predicated on celebrating the ‘fun’ side of skateboarding whilst simultaneously pushing the technical parameters of what could be done.

Covering multiple countries all over the world, Skatro is widely received as one of the top mini-cruiser suppliers that are in existence. Starting from a very small office and humble beginnings, Skatro brand was determined to provide excellent care and respect to their clients while maintaining a quality product that is both mechanically sound as well as financially viable.

Radiate Ride Good Skateboards are made of 7-ply maple construction with epoxy resin glue. It features 356A heat-treated cast aluminum high performance 5.0 trucks with grade 8 kingpins and axles. The super high rebound 99A PU wheels with grooved running surface provide better traction and abrasion resistance. The Abec 5 high precision speed bearings offer precision performance and a smooth ride. It has an 80 grit durable color matched grip tape with transparency. It is completely assembled and ready to go. This product has a 4.3 rating on Amazon.
A cruiser board is just that, a board that’s ideal for cruising across town. Cruiser boards have kicktails and are usually about the same size as “popsicle” decks, but with more variety in shapes. Cruisers are ideal for getting around because they are lighter and more nimble than larger longboards, allowing you to bob and weave through urban obstacles. Uniquely shaped cruiser decks have also become popular for transition skating because they add style and flavor without having a strong affect on the way the board skates.

With distinctive graphics, often touching upon controversial issues such as racism with American society such as the infamous Jim Thiebaud ‘Lynch the KKK’ graphic designed by Natas Kaupas and Kevin Ancell, and classic Jeff Klindt graphics such as the James Kelch ‘James’ board, which was recently re-released, Real’s aesthetic has always been instantly recognisable.

Whilst early skateboarders generally rode barefoot, preferring direct foot-to-board contact, and some skaters continue to do so, one of the early leading trends associated with the sub-culture of skateboarding itself, was the sticky-soled slip-on skate shoe, most popularized by Sean Penn's skateboarding character from the film Fast Times at Ridgemont High.[8] Because early skateboarders were actually surfers trying to emulate the sport of surfing, at the time when skateboards first came out on the market, many skateboarded barefoot. But skaters often lacked traction, which led to foot injuries.[26] This necessitated the need for a shoe that was specifically designed and marketed for skateboarding, such as the Randy "720", manufactured by the Randolph Rubber Company, and Vans sneakers, which eventually became cultural iconic signifiers for skateboarders during the 1970s and '80s as skateboarding became more widespread.[8][76][77][78][79][80]

The Atom has also improved its position from 4th to 3rd in 2018. You can trust these Longboards. They are continuously improving their product quality and increasing communication with general and potential customers. Correspondingly, they provide an opportunity for customers to select from a wide range of style, color, design and price to the customers. If the improving rate becomes constant, it will quickly switch to the upper position immediately.


The core of the skateboard trucks is extremely lightweight, compared to the other skateboards we listed. They still sport a heavy-duty aluminum, but their initial design helps the skateboard be lighter and easier to pivot. It also arrives un-assembled which allows for the adult or child to have a sense of accomplishment when they put the board together. You will also be able to customize it to your heart’s content!
I have a dream to hook up some of the world’s best skateboarders, and make everybody know and love this awesome sport! So, in the summer of 2017, I launched SkatesZone with little more than a dollar and want it to become an interesting place for all skaters where you can find a plenty of skateboards information, tips & tricks, instructions, and more.
Girl skateboards are know for their witty graphics and high quality canadian maple decks. This specific complete features Mike Carroll’s pro deck and it comes fully assembled directly from the manufacturer (Girl).   The reason this is such a great option for beginners is that all parts of this complete are truly pro quality and it’s built to last.  The width is also perfect for all ages and shoe sizes at a moderate 7.8″.  Definitely a great skateboard for beginners if you like the graphic and logo.

Ever notice small vertical or horizontal cracks through your grip tape or by the hardware of your trucks?  These are called stress or pressure cracks and are basically mini fractures of your skateboard deck that typically are seen in the areas of the deck that withstand the greatest impact (around the trucks).  A few pressure cracks is generally no big deal and you won’t even notice them while skating, but they can compound and grow larger and make your deck lose “pop” and increase the chance of snapping.  To avoid pressure cracks, you cant use riser pads underneath your trucks to reduce the level of impact your deck takes.  You should also avoid over tightening your hardware and storing your skateboard in a very humid place as both of these practices can also make your board weaker and more susceptible to pressure cracks.

It's too cold and dark to skate in Sweden for about six months out of the year. That must be when brand mastermind/artist Pontus Alv schemes on the global takeover he's been orchestrating for Polar. Not only are the brand's hats, tees, and hoodies some of the most coveted gear in the skate universe, the Polar team travels the globe hosting events, filming video clips, and getting people hyped on vigilante-style street skating. Look for Polar to come to your hood and build awesome, illegal concrete skate obstacles under a bridge, then bounce like gnarly, European skate tooth fairies. Good luck finding a tee or hat at this point—hype has made to goods rare, but let's hope as the excitement grows Mr. Alv will expand his distro.
The core of the skateboard trucks is extremely lightweight, compared to the other skateboards we listed. They still sport a heavy-duty aluminum, but their initial design helps the skateboard be lighter and easier to pivot. It also arrives un-assembled which allows for the adult or child to have a sense of accomplishment when they put the board together. You will also be able to customize it to your heart’s content!
Modern decks are made with a composite of thin layers of either maple or bamboo pressed into a near symmetrical shape with a nose equal to or longer than the tail. The deck should be concave (subtle U shape) along the whole board with both the nose and tail angled upwards (the "kick" of the board). Conceptually while the skateboard is a platform, it also serves to cup the balls of the skater’s feet with rising sides, nose and tail providing the foundation for pretty much all modern skateboard tricks.
If you have a great passion for the downhill ride as well as cruising and you are a beginner of longboarding, then ultimately, this board can satisfy your needs. It’s a versatile board as you can use it for cruising and downhill riding. The board is equipped with the perfect wheel size — not so big and not so small. It is big enough to give you a smooth ride but it is not too big to get wheel bite. Isn’t it cool? The 44 inches size of its wheels is perfect for comfortable cruising as well as riding downhill. It has some flex which will reduce the stress on your ankle and knees.
Sending sincere thanks to everyone that supported us over the last decade – including team riders, fans, customers, photographers, filmers, & mags. Thanks to George & Juli Powell & everyone at Skate One Corp. who believed in us & helped facilitate our vision. Thanks most of all to Cara-Beth Burnside for whom without her influence, leadership, & no-bullshit-spirit none of this would have ever been possible.
Started by a group of guys who decided to stick together after the fall of Alien Workshop, Quasi skateboards presses boards and prints shirts featuring psychedelic art for the year 2015, offering something different than most board brands today. Backed by a team boasting hometown heroes and certified style gawds, Quasi is a board company everybody wanted that nobody had made yet.
As the name implies, a complete skateboard contains all the parts listed above, but in an already assembled ready-to-ride skateboard.  The advantage to buying a complete is it completely eliminates the research and guesswork of buying each product individually and ensures that the skateboard is assembled correctly and safely.  This is the approach I used when buying a skateboard for my nephew and what I recommend for people buying a skateboard as a gift or as their very first skateboard for themselves.
Bianca Chandôn’s offerings can be found in high-end shops like Trés Bien and Supply, while Call Me 917, the sister company focusing on producing skateboards and hosting a skate team can be found mostly at select skate shops, such as New York’s own Labor Skateshop, but is also stocked at elite retailers like Dover Street Market. This brand duality allows Olson the freedom to explore new fields like cut-and-sew and womenswear with Bianca, while staying true to skateboarding with Call Me 917.
Skateboard hardware is used to connect the skateboard trucks to the skateboard deck. Skateboard hardware refers to the bolts and locknuts used when building a board. The bolts can have an Allen or Phillips head. Skateboard hardware comes in many different lengths, and often includes one different colored bolt so that the rider can mark the nose of their board.

The Element Quadrant #14 board is 8-inches wide and 31.75-inches long, from nose to tail. This deck features a bare top that needs grip tape and a design on the bottom with four quadrants featuring the Element symbol in alternating red and black backgrounds. The wheelbase between the trucks is just over 14 inches while the nose is 7 inches and the tail is 6.325.
A skateboard consists of a deck, trucks, wheels, bearings, hardware, and griptape. All parts come in a variety of sizes, graphics, colors, and signature pro series. The deck is the essential part of any skateboard. The deck ranges generally from 7.5" to 8.5". Skaters choose their board size for many reasons, but the basic deciding factor comes down to style of skating and foot size. Transition skaters usually ride a wider deck, while street skaters tend to go with a smaller deck. Skate brands such as Girl, enjoi, and Welcome offer a wide range of boards in regards to sizes and graphics. Skateboard trucks come in either a high or low setting, and also in a range of widths. The main factors in a truck, are how well they turn, and how well they grind. Independent, Venture, and Thunder, are truck brands that are well known for their turning and grinding capabilities. The skate hardware is generally either Phillips head or Allen key bolts. The skateboard wheels range from 50mm to 60mm. Some brands offer smaller and larger sizes, but 50-60mm is the general range. Like the deck sizes, wheel sizes depend on the skater's choice of terrain: Transition skaters tend to ride bigger wheels, while street skaters usually go with smaller wheels. Bones, Spitfire, Ricta, and Wayward wheel companies all make wheels for any terrain, whether you're a street shredder or a park burner. Skate bearings follow the ABEC rating system, which includes grades 1, 3, 5, 7, and 9. Bones, Bronson, and Andale are some of the top bearing brands in the skate market. CCS proudly carries all these brands, and many more.
First off, it’s important to decide what you will be using your skateboard for and what you will be doing with it. That’s why it’s important to ask a few key questions: Are you going to be using it every day? Is it for a new hobby? Is it for competition practice? What surface will you be skating on? Will you be partaking in park skating, or street skating?
In March 1976, Skateboard City skatepark in Port Orange, Florida and Carlsbad Skatepark in San Diego County, California would be the first two skateparks to be opened to the public, just a week apart. They were the first of some 200 skateparks that would be built through 1982. This was due in part to articles that were running in the investment journals at the time, stating that skateparks were a good investment.[6][27][38] Notable skateboarders from the 1970s also include Ty Page, Tom Inouye, Laura Thornhill, Ellen O'Neal, Kim Cespedes, Bob Biniak, Jana Payne, Waldo Autry, Robin Logan, Bobby Piercy, Russ Howell, Ellen Berryman, Shogo Kubo, Desiree Von Essen, Henry Hester, Robin Alaway, Paul Hackett, Michelle Matta, Bruce Logan, Steve Cathey, Edie Robertson, Mike Weed, David Hackett, Gregg Ayres, Darren Ho, and Tom Sims.[35]
Girl’s next full-length video came in 2003 with the release of ‘Yeah Right‘ which introduced a crew of younger Girl riders including Paul Rodriguez and Jereme Rogers, along with announcing videographer Ty Evans addition to the Crailtap family. From 2002 onwards, Ty Evans had been the main driving force behind Crailtap’s video output as Spike Jonze’s Hollywood directorial career took off.
×