If Supreme wasn’t featured on this list, we might get a long list of hate in the comments, but I’m not adding it just to satisfy the hypebeasts. Over the past few years, what was previously dismissed as a brand that catered mostly to resellers has once again gained a spot at the forefront of what is important in skateboarding today. With the release of cherry in 2014, Supreme showed the world that they haven’t forgotten their roots, and reminded us they will always be a skateboard company first and foremost.
Velocity Boards Retro Skateboards is a complete 22″ Banana Skateboard.  It includes 6″ Lightweight Aluminum Trucks, High-Speed ABEC-7 Bearings, High-Quality Wheels & Bushings and Hardware.  It has a Unique Textured Waffle Pattern on Deck and is designed for Maximum Grip.  The Deck measures about 22 x 6 x 4″.  It has a 6″ Truck Axle and a 3″ Truck Hanger.  It has a maximum weight capacity of  176 lbs. (80 kgs.).  It is great for all skaters who are 6 years old and above.  It has an Amazon rating of 4.7.
Whilst early skateboarders generally rode barefoot, preferring direct foot-to-board contact, and some skaters continue to do so, one of the early leading trends associated with the sub-culture of skateboarding itself, was the sticky-soled slip-on skate shoe, most popularized by Sean Penn's skateboarding character from the film Fast Times at Ridgemont High.[8] Because early skateboarders were actually surfers trying to emulate the sport of surfing, at the time when skateboards first came out on the market, many skateboarded barefoot. But skaters often lacked traction, which led to foot injuries.[26] This necessitated the need for a shoe that was specifically designed and marketed for skateboarding, such as the Randy "720", manufactured by the Randolph Rubber Company, and Vans sneakers, which eventually became cultural iconic signifiers for skateboarders during the 1970s and '80s as skateboarding became more widespread.[8][76][77][78][79][80]
The first thing to consider is what kind of skateboarding you want to do. Do you want to skate your local skate park and learn tricks? Do you want something for commuting across town or campus? Or, would you enjoy charging down hills at high speeds? Take a look at the options below and note which features work well for the type of skating you want to do.
Fury skateboarding trucks are heavier and stronger than most. Most skateboarders try to shave off as much weight as possible. However, Fury has some other special features to try to tempt you - Fury trucks are wider than most, come with a mini riser (similar to Phantom trucks), and special Fury bushings. And if that's not enough, Fury trucks have a unique ballpoint turning design, so that the hangar has a ball joint sitting in a socket in the base plate.
They have continued to ride that wave over the past year, continuously putting out great edits, following cherry up with Sickness, Red Devil, Joyride, and Swoosh, all in collaboration with cherry’s filmer Bill Strobeck. We all know they will never fall off when it comes to putting out fire gear every new season and drop, but to keep it coming with actual great footage is another story, and is definitely making skateboarding better today.
The deck is expertly constructed with a vertically laminated bamboo core and bamboo veneer exterior, all attached with triaxial glass and epoxy as well as a course grip tape top. The grip tape is arranged in an unusual and stylish, yet functional, design. The 34-inch board features a 13-degree nose angle and an 18-degree tail angle. With its directional shape, you’ll easily be able to cruise on this board or pull a few tricks.
Krown has been producing skateboards since the late 1990s, which was the time when skateboards lived through a revival and became a popular hobby once again. Since then, Krown’s goal has been to create quality skateboards with budget prices. This has made Krown skateboards well sought after among beginners who want to try out extreme sports, and need a starting board. Even though Krown started out selling only skateboards, they have evolved to also sell longboards, pads, helmets and the alike over the years.
Krooked’s video release to date include ‘Krooked Kronichles‘ (2006), the experimental ‘Krooked – Gnar Gnar‘ (2007) only released on VHS in limited numbers, predating the explosion of interest in the outdated VHS format as foregrounded by brands such as Palace skateboards some years later, ‘Krooked – Naughty‘ (2008) and Krooked – Krook3D (filmed in both regular and 3D formats) (2010).
Most skaters consider width is the most important dimension of the deck. That is measured straight across at the widest point of the deck. Skateboard decks generally range between 7.0 to 10.0 inches depending on the shape of the deck. There are boards that are narrower and wider than that, but they are not common and not practical for all around skating.
Velocity Boards Retro Skateboards is a complete 22″ Banana Skateboard.  It includes 6″ Lightweight Aluminum Trucks, High-Speed ABEC-7 Bearings, High-Quality Wheels & Bushings and Hardware.  It has a Unique Textured Waffle Pattern on Deck and is designed for Maximum Grip.  The Deck measures about 22 x 6 x 4″.  It has a 6″ Truck Axle and a 3″ Truck Hanger.  It has a maximum weight capacity of  176 lbs. (80 kgs.).  It is great for all skaters who are 6 years old and above.  It has an Amazon rating of 4.7.
There are three types of skateboards: classic, retro, and snake. Classic boards are the most common and what you generally find when you go shopping. Retro boards are longer and have larger wheels. They are great for skating long distances but inferior to classic boards for doing tricks. A snake board is not appropriate for kids since it requires intensive balance and has only one wheel.
By 2001 skateboarding had gained so much popularity that more people under the age of 18 rode skateboards (10.6 million) than played baseball (8.2 million), although traditional organized team sports still dominated youth programs overall.[43] Skateboarding and skateparks began to be viewed and used in a variety of new ways to complement academic lessons in schools, including new non-traditional physical education skateboarding programs, like Skatepass[44] and Skateistan,[45] to encourage youth to have better attendance, self-discipline and confidence.[46][47][48] This was also based on the healthy physical opportunities skateboarding was understood to bring participants for muscle & bone strengthening and balance, as well as the positive impacts it can have on youth in teaching them mutual respect, social networking, artistic expression and an appreciation of the environment.[49][50][51][52]
Skateboards, along with other small-wheeled transportation such as in-line skates and scooters, suffer a safety problem: riders may easily be thrown from small cracks and outcroppings in pavement, especially where the cracks run across the direction of travel. Hitting such an irregularity is the major cause of falls and injuries.[102] The risk may be reduced at higher travel speeds.
Bianca Chandôn’s offerings can be found in high-end shops like Trés Bien and Supply, while Call Me 917, the sister company focusing on producing skateboards and hosting a skate team can be found mostly at select skate shops, such as New York’s own Labor Skateshop, but is also stocked at elite retailers like Dover Street Market. This brand duality allows Olson the freedom to explore new fields like cut-and-sew and womenswear with Bianca, while staying true to skateboarding with Call Me 917.
The ENJOI line of skateboards is made to professional standards, which means that not only are you getting a durable ride, but you’ll also get a skateboard made to handle a lot of situations. You can ride this board on the street, at the skate park, on trails, and more. These decks are made with a very consistent method that is ideal for trick riding, especially.
i would recommend a deck size of 8.0 to 8.25 as for brand baker,girl,chocolate deathwish, its all preference the main difference between brands is the shape of the nose and tail. As for trucks i would go with independents or thunders. thunder have a quicker and more responsive turn while independents have a more delayed smooth turn. also thunders tend to wear away faster while independents don't. As for wheels go with 52mm or 54mm either spitefire formula fours of bones stf.
I rode for them as a ‘Amateur’ skateboarder in ‘79-’80, and they, at that time, had one of the Best boards out on the market, made of Fiberglass in a torsion box, with a foam core, and urethane ‘bumpers’ all around. I still have that board, and one set of C-70 Reds from then. I skated that gear hard, for many years, too. I still own 6–7 full sets of “krypto’s” for skateboards, and 8 that’re on quad-roller-skates. Great wheels, and they’re still in use.

In the early 1970s, Frank Nasworthy started to develop a skateboard wheel made of polyurethane, calling his company Cadillac Wheels.[7] Prior to this new material, skateboards wheels were metal or "clay" wheels. The improvement in traction and performance was so immense that from the wheel's release in 1972 the popularity of skateboarding started to rise rapidly again, causing companies to invest more in product development. Nasworthy commissioned artist Jim Evans to do a series of paintings promoting Cadillac Wheels, they were featured as ads and posters in the resurrected Skateboarder magazine, and proved immensely popular in promoting the new style of skateboarding.
Flip Skateboards is a high-level skateboards company that moved from the UK to California to take advantage of the American skateboarding industry. It was launched in 1991 by Jeremy Fox and by professional skateboarder Geoff Rowley, both of whom are from the UK. They both knew that to achieve the highest levels as a skateboarding company it was important to gain the recognition one can only get in the U.S. Furthermore, in 2017, Flip partnered with the European skateboard production and distribution company HLC. The decks of Flip Skateboards are made from 7-ply maple. Customers can enjoy the standard decks as well as the P2 models which are made with an oval-shaped fiber reinforcement panel which makes them extra durable. Psychedelic designs adorned many of the Flip skateboards as well as other designs. The Flip team has 15 professional skateboarders, including names such as Tom Penny, David Gonzalez, and Luan Oliveira.
While they might not be so well known as an apparel company as so many other brands on this list, Sk8mafia stays winning with skateboarding’s core base. Their most prominent pro, Wes Kremer, was named Thrasher’s Skater of the Year for 2014, and they continue to drop a monthly edit featuring their whole crew through Ride Channel. The Mafia keeps the streets fed.
If you are completely new to skateboarding, consider taking a minute to read through the Skateboard Decks Section in our Buyer’s Guide will be helpful, but a good rule of thumb is: the bigger your feet, the wider your board should be. If you wear a size 9 and up, you can’t go wrong with buying an 8” board. Narrow boards are easier to flip while wider boards are more stable, but there are no hard and fast rules to skateboarding. The only way to really find out what you like is by trying new shapes, sizes, and brands. Brands like Welcome, Baker, Chocolate, Deathwish, and Element all have a wide variety of sizes, shapes, and graphics.
×