Modern decks are made with a composite of thin layers of either maple or bamboo pressed into a near symmetrical shape with a nose equal to or longer than the tail. The deck should be concave (subtle U shape) along the whole board with both the nose and tail angled upwards (the "kick" of the board). Conceptually while the skateboard is a platform, it also serves to cup the balls of the skater’s feet with rising sides, nose and tail providing the foundation for pretty much all modern skateboard tricks.
Element, based out of Irvine, CA, is one of the cool skateboard brands today. They came in first on our list due to their quality boards, sustainable practices and the affordability they offer customers. They’re an environmentally responsible brand who creates their boards without causing any environmental damage. The Element team behind the company is comprised of a group of professional skateboarders who interact with a strong belief in the Element brand. They not only offer great products, but stand for an open minded and active lifestyle and have become one of the best skateboard brands in the world.
Illegal skating includes jumping over cracks or obstacles on the sidewalk (rather than stopping, picking up one’s board and walking around the obstacle), turning, riding over certain public property and any stopping maneuver that could be considered a trick. A ticket for skateboarding is a traffic violation, but skaters are more commonly cited for vandalism or trespassing—misdemeanors that stay on a skater’s record and usually carry a fine or a sentence of 40 hours of community service, or both.
Aside from keeping the more fashion-oriented side of skateboarding placated with ultrasoft crewnecks and clean 6 panel caps, Dime keeps the side of skating focused on actual footage and hijinks fed through their Instagram and Snapchat accounts (@dimemtl), where they post their day-to-day in Montreal doing what skateboarders do best: having fun with their friends.

I rode for them as a ‘Amateur’ skateboarder in ‘79-’80, and they, at that time, had one of the Best boards out on the market, made of Fiberglass in a torsion box, with a foam core, and urethane ‘bumpers’ all around. I still have that board, and one set of C-70 Reds from then. I skated that gear hard, for many years, too. I still own 6–7 full sets of “krypto’s” for skateboards, and 8 that’re on quad-roller-skates. Great wheels, and they’re still in use.

Skateboarding during the 1990s became dominated by street skateboarding. Most boards are about 7 1⁄4 to 8 inches (180 to 200 mm) wide and 30 to 32 inches (760 to 810 mm) long. The wheels are made of an extremely hard polyurethane, with hardness (durometer) approximately 99A. The wheel sizes are relatively small so that the boards are lighter, and the wheels' inertia is overcome quicker, thus making tricks more manageable. Board styles have changed dramatically since the 1970s but have remained mostly alike since the mid-1990s. The contemporary shape of the skateboard is derived from the freestyle boards of the 1980s with a largely symmetrical shape and relatively narrow width. This form had become standard by the mid '90s.[42]
We love Powell Peralta for a number of reasons as do all its customers but the foremost reason being its variety in terms of the skateboards that it manufactures. It has a collection of 30 different skateboard models, with a fusion of unique graphics and colors. They offer different skateboards that you can choose from, depending on your riding style, budget, body fitness and riding style.

It is mainly because those items are guaranteed to help you familiarize yourself with the ins and outs of using them. They are a big help in making you feel comfortable when you push off with your feet while also balancing on top of the board when riding. It is not good to go for a very technical product, so it’s best to choose the mentioned types first.
The best criticism you could make about skateboarding in general right now is that it takes itself too seriously. Rightfully so. Skateboarders are often under attack, and what they do is illegal in most places. Skate culture is constantly being ripped off and bastardized. That's why it's so important to have a healthy sense of humor about it all, and that's why it's important that skateboarding has Roger.

The wheels of your skateboard can greatly affect your ride in numerous ways, such as the speed, your ability to take control of the skateboard’s movements, and what you feel while riding the board. The good news is that they come in various sizes, levels of durability, and colors, allowing you to pick one that suits your skateboard preference and style.


Bearings are rated by the ABEC scale (1-9), which has nothing to do with skateboarding. Manufacturers know skaters believe higher ABEC ratings mean faster bearings. They do not, and you won’t find high-quality bearings on off-the-shelf skateboards. Most of these completes are slow. Make a bearing upgrade a top priority. Good bearings can make almost any skateboard fast. This article by longtime pro Anthony Pappalardo gives an insider’s perspective on bearings.
If you didn’t already know, the “nose” of a skateboard is typically the front and the “tail” is the back.  When you fall or slip and your board slams into curbs, fences, or other hard objects, it’s common for the wooden ends to chip or become damaged upon impact.  Over time these chips can make it harder to preform tricks and even just cruise around.  These chips can be prevented by buying a carbon fiber or non-wood deck, or by there are some metal edges available that can be installed on the nose and tail.
You’re just looking for a quality skateboard to buy for a beginner (either you or someone you know), but you have no idea where to start.  You see bearings, hardware, wheels, decks, and trucks being advertised but don’t want to spend hours researching which individual part to buy.  This is how I felt when I was first looking to but a complete skateboard for my nephew for Christmas many years ago. I wanted something that he would love, but also that was safe and would not break the bank.  After researching and making a decision I thought it would be useful to share this information with others who may be in a similar situation.
A skateboard consists of a deck, trucks, wheels, bearings, hardware, and griptape. All parts come in a variety of sizes, graphics, colors, and signature pro series. The deck is the essential part of any skateboard. The deck ranges generally from 7.5" to 8.5". Skaters choose their board size for many reasons, but the basic deciding factor comes down to style of skating and foot size. Transition skaters usually ride a wider deck, while street skaters tend to go with a smaller deck. Skate brands such as Girl, enjoi, and Welcome offer a wide range of boards in regards to sizes and graphics. Skateboard trucks come in either a high or low setting, and also in a range of widths. The main factors in a truck, are how well they turn, and how well they grind. Independent, Venture, and Thunder, are truck brands that are well known for their turning and grinding capabilities. The skate hardware is generally either Phillips head or Allen key bolts. The skateboard wheels range from 50mm to 60mm. Some brands offer smaller and larger sizes, but 50-60mm is the general range. Like the deck sizes, wheel sizes depend on the skater's choice of terrain: Transition skaters tend to ride bigger wheels, while street skaters usually go with smaller wheels. Bones, Spitfire, Ricta, and Wayward wheel companies all make wheels for any terrain, whether you're a street shredder or a park burner. Skate bearings follow the ABEC rating system, which includes grades 1, 3, 5, 7, and 9. Bones, Bronson, and Andale are some of the top bearing brands in the skate market. CCS proudly carries all these brands, and many more.
It’s best to not go overboard with spending a lot of cash on your first skateboard. After all, it will take a lot of beating, and will surely be reduced to looking like a scratched plank of wood! Best skateboards to learn on include budget, beginner skateboards that offer you all the quality features a more expensive skateboard would, but at a lower expense. If you are new to skateboarding, it’s also recommended to get a skateboard with smaller wheels, since they go slower and are less intimidating!
It was a slow start for 3D, who had Alex Olson bail on them when they first started out before they could even get their first run of boards inside of shops, leaving the company at just two riders: Brian Anderson and Austyn Gillette. Now, due at least partially in part to Brian Anderson’s solidified status as a skateboarding legend, 3D has taken off and become an established brand that’s not taking itself too seriously, but still putting on for skateboarding. 3Ds first video offering, featuring amateur rider Tom Karangolov in a dreamy pink colorcast world, has even showed that they’re looking to shake things up in the stale footage side of skateboarding.

Powell has made sure to provide their customers with more than one design of one of their most sought-after skateboards. The Golden Dragon 2 is very similar to its predecessor, the Golden Dragon and is just as reliable as its sister model. When it comes to skateboarding, you can’t ask for a better board than the Golden Dragon 2. It’s durable, firm and thanks to the concave skateboard deck design, will allow you to do many tricks. Tricks, that other boards could possibly not support as well.

Alien Workshop is a Dayton, Ohio based company, established by Chris Carter, Neil Blender and Mike Hill in 1990. They have gone through several ownership changes, including a period of being owned and operated by Burton Snowboards, but have persevered and become one of the top skateboard brands today. Alien Workshop has faced several turbulent challenges with varying outcomes, however they have remained dedicated to providing a high quality, yet also affordable boards. We like Alien Workshop for their innovative designs and conscience effort to make a great board, that many can afford. Their high quality boards has allowed them to become one of the best rated skateboard brands today.


This article is about regular street skateboards.  They are rounded on both ends and curved upwards.  Sometimes beginners are confused by longboards that are much larger and irregularly shaped or cruiser board that can be very small.  I just wanted to clarify this point, as this article is very helpful for choosing the best skateboard for beginners, but may provide incorrect or unimportant information if you are actually looking for longboards or cruisers.
Since Fine Artists Vol 1, Element have released numerous videos including Element – Third Eye View (1998), Element – Rise Up (2005) which focused on the brand’s European team, and more recently, the short video Element – Rise and Shine (2011) focusing on Element team rider Nyjah Huston. Element’s video output is unparalleled with releases from all over the globe – most of which can be found via the link above..

QuartetQuasiR.A.D.RandalRayneRealReality GripReflexRemind InsolesRicher PoorerRictaRIPNDIPRoger SkateboardsRogueRoyalRVCASabreSalt & StoneSanta CruzSanta Monica AirlinesSchmitt StixScramSector 9Shake JuntShortysSilverSK8MAFIASk8ologySkate MentalSkateknifeSkeleton Key MFGSkullcandySml.S-OneSourSOVRNSpitfireSquare UpStanceStateStereoTensorThank YouThe HundredsThe Killing FloorThe Quiet LifeTheoriesThrasherThunder TrucksTiredToy MachineTrafficTransworldTriple EightTurbokolorTwo Cents SkateboardsUnitVagrantVansVenomVentureVicious GriptapeVideoVisionVolcomWayward WheelsWelcomeWKNDZ FlexZero
These boards are perfect! perfect shape (for me anyways) medium concave (which is better than deep or mellow in my opinion) perfect shape of the tail and nose, and have perfect pop (which last FOREVER) they're very durable too. Everything is perfect but why they're ranked so low is because not many people get deluxe boards than come here to write about how awesome they are.
Skateboards, along with other small-wheeled transportation such as in-line skates and scooters, suffer a safety problem: riders may easily be thrown from small cracks and outcroppings in pavement, especially where the cracks run across the direction of travel. Hitting such an irregularity is the major cause of falls and injuries.[102] The risk may be reduced at higher travel speeds.
What the fuck is Bro Style? That's what a lot of skate nerds found themselves wondering at the end of 2012. Bro Style crept onto the scene with a goofy guerrilla-style internet marketing campaign that involved little more than the thumbs up logo. Little by little, product started to trickle out—beanies, snapbacks, pocket tees, socks, and other odd ephemera—and a few video clips. Bro Style is still something of a mystery, but one thing is clear, it's not meant to be taken too seriously. And that is seriously important for the skate industry to remember.
The problem with wheel bite is that it tends to stop the motion of the wheels. This can result not only in a bad wipeout for the rider but also damage to the wheels. With the help of the riser pads, it is easier for you to preserve the deck of your skateboard since these pads can reduce the tendency of having stress cracks on where the trucks and deck meet.
The World Industries logo used to be the marker of a diehard skater, but recently it's gotten into the children's skateboard market too. Because of the brand's long history and trusted reputation in the skateboard community at large, the boards are generally good quality. However, remember that the brand usually caters to hardcore skaters; some parents may not approve of some of the brand's imagery. 
One of the skateboarding companies that are at the op is Almost Skateboards, founded by pro skateboarders Daewon Song and Rodney Mullen in 2003 and distributed by Dwindle Distribution. Both had ceased participating in their previous companies, Enjoi and Artafact, respectively. Almost is a brand that concentrates on fun and creativity but on also not taking oneself too seriously. The company produces decks made of 7-ply, 8-ply and carbon fiber constructions, bound with resin epoxy glue. The brand offers completes that include skateboards with the deck, wheels, trucks and bearings, as well as wheels, accessories and apparel. The team consists of Rodney Mullen, Daewon Song, Cooper Wilt, Youness Amrani, Yuri Facchini, Tyson Bowerbank, Fran Molina, and Mitchie Brusco.
Skateboarders like things that aren't skateboarding, too, you know. Camping, fishing, motorcycles… Uh, skateboarding? Crap. Whatever. Pro skater Adrian Lopez founded Loser machine and the Dark Seas Division as a way to explore other facets of the culture through cool clothing. Loser Machine is a complete collection that goes far beyond that typical tees, jeans, and hats formula that many skate apparel brands rely on—leather motorcycle gloves, denim vests, and floral print button-downs are all evidence that this is a well-conceived project from a skater with good taste.
Freedom Plaza has become a popular location for skateboarding, although the activity is illegal and has resulted in police actions.[5][115] A 2016 National Park Service management plan for the Historic Site states that skateboarding has damaged stonework, sculptures, walls, benches, steps, and other surfaces in some areas of the Plaza.[5] The management plan further states that skateboarding presents a persistent law enforcement and management challenge, as popular websites advertise the Plaza's attractiveness for the activity.[5] The plan notes that vandals have removed "No Skateboarding" signs and recommends the replacement of those signs.[5]

“I think it’s just also like, people want to have fun. If you watch say those types of Street League type of skateboarders, who are super amazing skateboarders that can push these crazy tricks down rails and stairs, like switch tre down fifteen stairs or whatever trick they do — it’s amazing to see that level of skating, but if you are an average Joe living in a small town you’re just like, “I’m never going to be able to kickflip back noseblunt twenty-stair rails”. That’s always the biggest trick. If you ask me it’s like, “What videos do you really enjoy?” The videos that you can some how relate to. Like, “Hey, I could actually do some of these tricks.” You connect to it and you feel like you can picture yourself being a part of the whole thing. When people put out these amazing super stunt skateboarding videos, pushing it to the furthest level possible, that’s rad in one sense, but to me personally as a kid I could never in my wildest dreams believe that I could do that too. I respect it. I understand it. But does it make me want to go skate? No.”


Hanna-Barbera, DC Comics and Todd Francis – at Almost, childhood dreams come true. But on the top sheet, however, is no place for childishness: Willow, Haslam, Song, Mullen and Co. are ripping it on these decks and can hardly be surpassed in ability. To provide the needed strength for the guys Almost has invented the innovative Impact Technology. The two lost places are a minor matter because Almost makes their own thing anyway. Up to 8 layers are available from 62.99 € | 55.00 GBP!

The Quest Super Cruiser is made of Canadian Maple and measures 31″(787mm)x8″(203mm). It has a maximum capacity of 500 lbs. The wheels have a size of 1.99″(50mm)x1.42″(36mm) Pu with logo printing. The pattern is heat transferred. The trucks are 5″ heavy duty aluminum alloy. This skateboard can provide you a high-quality ride with an entry-level price. This is the best skateboard for both beginners and price-conscious expert skaters. It has an average rating of 4.3 on Amazon.


Alien Workshop is a Dayton, Ohio based company, established by Chris Carter, Neil Blender and Mike Hill in 1990. They have gone through several ownership changes, including a period of being owned and operated by Burton Snowboards, but have persevered and become one of the top skateboard brands today. Alien Workshop has faced several turbulent challenges with varying outcomes, however they have remained dedicated to providing a high quality, yet also affordable boards. We like Alien Workshop for their innovative designs and conscience effort to make a great board, that many can afford. Their high quality boards has allowed them to become one of the best rated skateboard brands today.
Of course, 2015 also stands for a line of new companies that drew a lot of attention on them and we are talking about some serious game-changers here. There was Sour Skateboards, who had an incredible launch (or are we talking of a comeback?) as well as Isle Skateboards (did you hear about the Bright European Skateboarding Awards 2016?), Krooked and many more. We are hyped for this year and can’t wait to explore whatever there is to come with all of you guys! We would love to know your opinion. Which are your favorite deck brands. Feel free to comment below.
A rugged street inspired brand founded by Stevie Williams and Troy Williams, DGK has been a favorite of inner city kids for years.  Interestingly, this brand has found its way into mainstream streetwear culture through famous skateboarding rappers such as Lil Wayne and others. An overall solid brand with great products and street inspired logos and graphics.
SkatesZone.com is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com. Additionally, SkatesZone.com participates in various other affiliate programs, and we sometimes get a commission through purchases made through our links.
Goldfish and Mouse established Girl’s video aesthetic with numerous movie skits inter-cut with the skating, including the infamous Eric Koston as Charlie Chaplin skit. Pioneering skate photographer and film-maker Spike Jonze (also responsible for Blind Skateboard’s Video Days) as a part-owner of Crailtap has been involved in the making of all of their videos to date and it is his cinematic approach that lends Girl’s video output its uniqueness.
×