Decks come in a variety of shapes and sizes. You can choose a mini-board, a cruiser, a drop-through, or a standard deck for your favorite set of wheels and hardware. Widths range too from a few inches with a 22-inch board to the wide size of a true cruiser. Some decks are flat as possible while others are significantly concave for optimized turning. You can buy a deck with artwork and grip tape already attached for a quick install or you can get a bare-bones wooden deck to truly customize.
The Element Quadrant #14 board is 8-inches wide and 31.75-inches long, from nose to tail. This deck features a bare top that needs grip tape and a design on the bottom with four quadrants featuring the Element symbol in alternating red and black backgrounds. The wheelbase between the trucks is just over 14 inches while the nose is 7 inches and the tail is 6.325.
Many cities also began implementing recreation plans and statutes during this time period, as part of their vision for local parks and communities to make public lands more available, in particular, for skateboarding, inviting skateboarders to come in off of the city streets and into organized skateboarding activity areas. By 2006 there were over 2,400 skateparks worldwide and the design of skateparks themselves had made a transition, as skaters turned designers.[43][60][61][62][63] Many new places to skateboard designed specifically for street skaters, such as the "Safe Spot Skate Spot" program, first initiated by professional skateboarder Rob Dyrdek throughout many cities, allowed for the creation of smaller alternative safe skate plazas to be built at a lower cost.[64] One of the largest locations ever built to skateboard in the world, SMP Skatepark in China, at 12,000 square meters in size, was built complete with a 5,000-seat stadium.[65]
Spotting a poorly made skateboard deck can be hit or miss. Some toy skateboards don’t even try to look “real". They might have no concave to their shape and may not even have a extended nose. Others may be shaped to resemble a real skateboard, but are made with cheap woods and fillers. If that is the case, they may be both thicker and heavier than a quality board, or they may be ready to fall apart quite quickly and easily. Consider that it isn’t easy to make a real skateboard deck. Most legitimate skateboard decks will sell for somewhere between $35 - $55. If you are paying that much for the entire skateboard, it is unfortunately a sign that significant corners were cut on quality. 
In the early 1970s skateparks hadn't been invented yet, so skateboarders would flock and skateboard in such urban places as The Escondido reservoir in San Diego, California. Skateboarding magazine would publish the location and Skateboarders made up nicknames for each location such as the Tea Bowl, the Fruit Bowl, Bellagio, the Rabbit Hole, Bird Bath, the Egg Bowl, Upland Pool and the Sewer Slide. Some of the development concepts in the terrain of skateparks were actually taken from the Escondido reservoir.[27][28][29] Many companies started to manufacture trucks (axles) specially designed for skateboarding, reached in 1976 by Tracker Trucks. As the equipment became more maneuverable, the decks started to get wider, reaching widths of 10 inches (250 mm) and over, thus giving the skateboarder even more control. A banana board is a skinny, flexible skateboard made of polypropylene with ribs on the underside for structural support. These were very popular during the mid-1970s and were available in a myriad of colors, bright yellow probably being the most memorable, hence the name.

The wheelbase of a skateboard deck is the distance between the centers of the inner most truck mounting holes. This distance ranges between 13.5 to 16 inches and is generally proportional to the deck length on standard popsicle decks. Some specially shaped boards and cruiser decks have differing length/wheelbase ratios. Wheelbase can impact stability and turning radius, but the effect is often subtle and not a major concern for a beginner.


The smaller the wheel diameter, the easier it is to do tricks, because it makes the board sit closer to the ground. But beginners will definitely have an easier time controlling a board with larger diameter wheels. Think of the larger wheels as being akin to training wheels. If you don’t want your board to have “pop” as you are learning, you can choose softer wheels, all the way down to a 73a. They won’t let you go as fast, and you’ll have to push off more often, but they do make it more likely that your board will stay on the ground.

Prior to the mid-seventies many early skateboards were originally based upon the concept of “Sidewalk Surfing” and were tied to the surf culture, skateboards were surfboard like in appearance with little to no graphics located under the bottom of the skateboard-deck. Some of the early manufactured skateboards such as "Roller Derby", the "Duraflex Surfer" and the "Banana board" are characteristic. Some skateboards during that time were manufactured with company logo's or stickers across the top of the deck of the skateboard, as griptape was not initially used for construction. But as skateboarding progressed & evolved, and as artist began to design and add influence to the artwork of skateboards, designs and themes began to change.[92]
Progressive designs deliver a more dramatic upward curve and a wider base, providing increasingly secure footing and a locked-in feel. The W-concave shape is more narrow with an additional center curve, allowing for a greater shift in energy between the heel and toe. This design also boasts more responsive control and quick turning capabilities. Tub concave decks resemble the radial shape, however their rails extend at a sharp angle instead of a gradual curve. Asymmetrical decks feature rails that extend at different angles, affording more power to a rider's heels when making turns. Less commonly used are decks with convex and completely flat shapes. Convex boards offer an upwards-arching shape, which some downhill skateboarders prefer for a more natural feel, whereas flat designs increase available foot space and are more popular for experienced riders looking to perform fancy tricks.
It’s long deck and premium bearings will give you the ease of pushing which will help you to tear out of around- town traveling. It has a unique shape of the perimeter which offers you 9.6 inches of leverage per turn. Can you imagine it? It also helps you to eliminate the wheel bite. This board has a maple covered deck that will certainly catch the attention of others. It is almost impossible that you cease to enjoy the splendor and elegance of this board. Furthermore, along with your stylish longboard, 245 mm axles are incorporated.
Skateboard hardware is used to connect the skateboard trucks to the skateboard deck. Skateboard hardware refers to the bolts and locknuts used when building a board. The bolts can have an Allen or Phillips head. Skateboard hardware comes in many different lengths, and often includes one different colored bolt so that the rider can mark the nose of their board.

Element, based out of Irvine, CA, is one of the cool skateboard brands today. They came in first on our list due to their quality boards, sustainable practices and the affordability they offer customers. They’re an environmentally responsible brand who creates their boards without causing any environmental damage. The Element team behind the company is comprised of a group of professional skateboarders who interact with a strong belief in the Element brand. They not only offer great products, but stand for an open minded and active lifestyle and have become one of the best skateboard brands in the world.


As has been noted that Longboard Brand is the king of all brands. For five years, it has maintained the first position without any ups and downs. The survey for 2018 has also given the same result for Sector 9. The attractive design and technical support of this brand have received a maximum score from the customers. It has unbeaten quality, size, riding style, overall performance, safety, and other relevant requirements. If you have the budget, you can undoubtedly rely on this best longboard brand.
In 2015, Hockey was announced to the world as Fucking Awesome’s sister brand with the release of their first eponymous video clip ‘Hockey‘ featuring riders John Fitzgerald and Donovon Piscopo. Since that first release Hockey have added former Anti Hero rider Andrew Allen to their team, along with Ben Kadow, a move announced in their second video – Hockey II.
I rode for them as a ‘Amateur’ skateboarder in ‘79-’80, and they, at that time, had one of the Best boards out on the market, made of Fiberglass in a torsion box, with a foam core, and urethane ‘bumpers’ all around. I still have that board, and one set of C-70 Reds from then. I skated that gear hard, for many years, too. I still own 6–7 full sets of “krypto’s” for skateboards, and 8 that’re on quad-roller-skates. Great wheels, and they’re still in use.
Radiate Ride Good Skateboards are made of 7-ply maple construction with epoxy resin glue. It features 356A heat-treated cast aluminum high performance 5.0 trucks with grade 8 kingpins and axles. The super high rebound 99A PU wheels with grooved running surface provide better traction and abrasion resistance. The Abec 5 high precision speed bearings offer precision performance and a smooth ride. It has an 80 grit durable color matched grip tape with transparency. It is completely assembled and ready to go. This product has a 4.3 rating on Amazon.

Based out of Huntington Beach, California, Good Skateboards is a grassroots inspired skate brand specializing in quality boards. Skateboarding isn’t about what you do, but how you do it. That’s Good Skateboard’s mission and they’re sticking to it! The brand is committed to supplying the skating industry with positive vibes and exceptional products that make you appreciate skateboarding all over again. Good Skateboards decks are constructed from 100% Canadian maple and made in the USA. Their decks are classic in board style and feature fun artwork from artist Vincenzo Colonna. In addition to decks, they also offer branded tees and accessories featuring their iconic “Ok” hand gesture logo. Good Skateboards t-shirts have similar graphics to what you see on their decks. You’ll see the same artwork on their stickers too!
Swing boarding is the activity where a skateboard deck is suspended from a pivot point above the rider which allows the rider to swing about that pivot point. The board swings in an arc which is a similar movement to riding a half pipe. The incorporation of a harness and frame allows the rider to perform turns spins all while flying though the air.
They have continued to ride that wave over the past year, continuously putting out great edits, following cherry up with Sickness, Red Devil, Joyride, and Swoosh, all in collaboration with cherry’s filmer Bill Strobeck. We all know they will never fall off when it comes to putting out fire gear every new season and drop, but to keep it coming with actual great footage is another story, and is definitely making skateboarding better today.
It is mainly because those items are guaranteed to help you familiarize yourself with the ins and outs of using them. They are a big help in making you feel comfortable when you push off with your feet while also balancing on top of the board when riding. It is not good to go for a very technical product, so it’s best to choose the mentioned types first.
Choosing skateboards that are made out of good, sturdy, and durable wood is vital. Most boards nowadays are made out of Canadian Maple. The skateboard deck is usually made out of a dozen or so layers. This ensures that your board will be reliable and can take some beating when you fall off or start doing skateboard tricks. You should also look for pro boards that have metal skateboard trucks, since these are the ones that support decks best.
In 2015, Hockey was announced to the world as Fucking Awesome’s sister brand with the release of their first eponymous video clip ‘Hockey‘ featuring riders John Fitzgerald and Donovon Piscopo. Since that first release Hockey have added former Anti Hero rider Andrew Allen to their team, along with Ben Kadow, a move announced in their second video – Hockey II.

^ Jump up to: a b "Pennsylvania Avenue National Historic Site" (PDF). National Register of Historic Places Registration Form: National Park Service: United States Department of the Interior. Washington, D.C.: Government of the District of Columbia Planning Office. pp. 191–192. Archived from the original (PDF) on January 7, 2017. Retrieved March 29, 2017.


Be sure to purchase from a reputable source. Buying online might save you a few dollars, but try your local skate shop first. The few extra dollars you spend support the shop and your local skate community. Developing a good relationship with a local skate shop often saves you money in the long run. The completes are not as good as custom made, but you can get them for a lot less money and upgrade any bad components later.
The growth of the sport during this period can also be seen in sales figures for Makaha, which quoted $10 million worth of board sales between 1963 and 1965 (Weyland, 2002:28). By 1966 a variety of sources began to claim that skateboarding was dangerous, resulting in shops being reluctant to sell them, and parents being reluctant to buy them. In 1966 sales had dropped significantly (ibid) and Skateboarder Magazine had stopped publication. The popularity of skateboarding dropped and remained low until the early 1970s.[7][25][26]
Skate graphics have often incorporated blood, guts, and gore into board and T-shirt designs, but few brands render gnarliness quite as well as Heroin Skateboards. It's no surprise that a brand founded by artist Mark “Fos” Foster would have such tight art direction. Fos has a loose, low-fi handstyle that can be see in much of the brand's designs, and the delinquent band of team riders and their antics are a perfect embodimentof whatever “image” Fos is after.
We would also like to point out one amazing detail about Plan B that makes it stand out from the other top skateboard brands, the deck technology that it uses. I already talked about how their decks are pretty strong and have minimal flex. But its other products like Plan B BLK ICE decks with wax used on their standard build decks to increase the speed and smoothness of skating a rail and the Flashback Series that uses prospect skateboard deck technology to make the boards thinner, lighter and stronger, are amazing!
By 2001 skateboarding had gained so much popularity that more people under the age of 18 rode skateboards (10.6 million) than played baseball (8.2 million), although traditional organized team sports still dominated youth programs overall.[43] Skateboarding and skateparks began to be viewed and used in a variety of new ways to complement academic lessons in schools, including new non-traditional physical education skateboarding programs, like Skatepass[44] and Skateistan,[45] to encourage youth to have better attendance, self-discipline and confidence.[46][47][48] This was also based on the healthy physical opportunities skateboarding was understood to bring participants for muscle & bone strengthening and balance, as well as the positive impacts it can have on youth in teaching them mutual respect, social networking, artistic expression and an appreciation of the environment.[49][50][51][52]

'90s nostalgia is the name of the game. VHS tapes. Grimey hip-hop. Drinking forties, smoking blunts, skating filthy street spots at night, and general hooliganism are cornerstones of skateboarding's mid-90s golden years, and Palace is all about that life. No wonder you see the tees and skate decks stocked at Supreme, the only brand that compares to Palace when it comes to nailing that “fuck it” aesthetic. Palace gear has been causing an uproar lately—yes, Palace was on that designer parody tee shit before everyone else, and yes, the collab with Umbro was one of the best we've seen in years—but make no mistake the brand is skate to the core, and no amount of hype will change that. Let's hope, anyway.

Alien Workshop is a Dayton, Ohio based company, established by Chris Carter, Neil Blender and Mike Hill in 1990. They have gone through several ownership changes, including a period of being owned and operated by Burton Snowboards, but have persevered and become one of the top skateboard brands today. Alien Workshop has faced several turbulent challenges with varying outcomes, however they have remained dedicated to providing a high quality, yet also affordable boards. We like Alien Workshop for their innovative designs and conscience effort to make a great board, that many can afford. Their high quality boards has allowed them to become one of the best rated skateboard brands today.
Hi Everyone! My name is Pete (yes, I’m a real person who lives in a cornfield just outside of Buffalo, NY – well, my house is in the middle of a cornfield!). As a former collegiate athlete in Iowa, I’ve played varsity basketball, volleyball and soccer. I also happen to be an outdoor adventure fanatic who’ll do whatever it takes to never miss my annual week-long wilderness canoe trip in the Northern Ontario wilderness. Sports equipment has come a long way over just the past few years, and I’d love to share with you the latest (and most competitively priced) products that will save you many of the frustrations I’ve dealt with over the years! Please feel free to cruise the site and drop me a line on the contact page if you have ideas for improvements or anything else!
Alien Workshop is a Dayton, Ohio based company, established by Chris Carter, Neil Blender and Mike Hill in 1990. They have gone through several ownership changes, including a period of being owned and operated by Burton Snowboards, but have persevered and become one of the top skateboard brands today. Alien Workshop has faced several turbulent challenges with varying outcomes, however they have remained dedicated to providing a high quality, yet also affordable boards. We like Alien Workshop for their innovative designs and conscience effort to make a great board, that many can afford. Their high quality boards has allowed them to become one of the best rated skateboard brands today.
Unique Designs: The unique designs of Globe skateboards make them one of the most innovative and unique skateboard companies in the world today. They were professional skateboarders who began their business because they were not satisfied with the quality of boards available. With Globe, that changed. You can now count on reliable, unique designed boards.
Many musicians, painters and designers have explored their potentials through skateboarding. When you skate, your inner talents come out in many ways. Painters paint their decks with artistic sceneries and musicians sing while they are deeply involved in cruising through the smooth roads. People with graphic designing and photography passion bring out their skills by taking an incredible picture while skateboarding and edit them beautifully. Skateboarding no doubt polishes your skills!
Skateboarders like things that aren't skateboarding, too, you know. Camping, fishing, motorcycles… Uh, skateboarding? Crap. Whatever. Pro skater Adrian Lopez founded Loser machine and the Dark Seas Division as a way to explore other facets of the culture through cool clothing. Loser Machine is a complete collection that goes far beyond that typical tees, jeans, and hats formula that many skate apparel brands rely on—leather motorcycle gloves, denim vests, and floral print button-downs are all evidence that this is a well-conceived project from a skater with good taste.
With Board Blazers LED Cheap Skateboards, you can quickly customize your ride.  There’s no need for any bulky battery pack or wires.  You just need to place the lights under the trucks to do the tricks.  Now, you can cruise safely with style.  It is self-adhesive and every light comes with small, long-lasting, and easily replaceable lithium batteries.  The on/off activation is controlled manually. It includes a set of 4 lights with the matching color.  It is best for all types skateboards, longboards, and scooters. It is the perfect gift for anyone.  It is the most trusted product with a rating of 4.5 on Amazon.
It was a slow start for 3D, who had Alex Olson bail on them when they first started out before they could even get their first run of boards inside of shops, leaving the company at just two riders: Brian Anderson and Austyn Gillette. Now, due at least partially in part to Brian Anderson’s solidified status as a skateboarding legend, 3D has taken off and become an established brand that’s not taking itself too seriously, but still putting on for skateboarding. 3Ds first video offering, featuring amateur rider Tom Karangolov in a dreamy pink colorcast world, has even showed that they’re looking to shake things up in the stale footage side of skateboarding.
Unlike football and cricket, skateboarding has no age limitations. People might say that it’s an ideal sport for kids and teens but that’s not true. Even the oldies can step up on the skateboard and perform thrilling drills to have some fun activity in their routine. The biggest examples are Lance Mountain and Chris Millers who are showing their skateboard talent in their 40s and 50s and nobody knows when they will stop.
Skateboarding during the 1990s became dominated by street skateboarding. Most boards are about 7 1⁄4 to 8 inches (180 to 200 mm) wide and 30 to 32 inches (760 to 810 mm) long. The wheels are made of an extremely hard polyurethane, with hardness (durometer) approximately 99A. The wheel sizes are relatively small so that the boards are lighter, and the wheels' inertia is overcome quicker, thus making tricks more manageable. Board styles have changed dramatically since the 1970s but have remained mostly alike since the mid-1990s. The contemporary shape of the skateboard is derived from the freestyle boards of the 1980s with a largely symmetrical shape and relatively narrow width. This form had become standard by the mid '90s.[42]
Mark Gonzalez created bLind Skateboards in 1989, and shortly after initiated a pro team for his skateboard brand. The bLind brand is known for higher durability due to their innovative features. The boards released by bLind are developed and marketed for hardcore skaters and top other skateboarding brands. We like that bLind goes all out providing one of the strongest boards out there, and without sacrificing the flex needed for tricks. They also do it all with a sick style and an innovative business plan that has made them one of the top skateboard brands.
The Best of Premium Cable TV Series The Best Organic Coffee Brands America's Most Attractive Female Athletes The Best TV Shows to Rewatch 27 Hilariously Weird Tinder Profiles You'd Swipe Right on for the Heck of It 43 Idiots Who Picked Fights with the Wrong Guy The Best Anime Series of All Time The Best Coffee Drink Brands List of Famous Literary Critics The Best Nursery Bedding Brands The Most Screwed Up Sibling Relationships In Anime 16 Movie "In Jokes" You Probably Didn't Notice Stars Who Passed on Iconic Hollywood Roles The Best British Sitcoms of All Time The Best Reality TV Shows Ever Men's Athleisure Brands Times Companies Royally Screwed Themselves With Marketing Promotions Fast & Furious Quotes That Prove Dom Is Truly Wise The Best Serial Cop Dramas of All Time The Most Captivating Celebrity Eyes (Men) Jobs That Are the Most Beneficial to Society What Are the Seattle Seahawks Going to Do on 9/11? The Hottest Women from Sons of Anarchy Hottest Sarah Chalke Photos
Hardware won’t have an effect on your skating. Standard 7/8 - 1 inch hardware will work for most skateboards. However, if you use riser pads, be sure that you have long enough hardware to go all the way through the deck, trucks and riser pad. If you're unsure what length of hardware you need, give one of our experts a call at 888.450.5060 and we'll be stoked to help you out.

Powell Peralta is a brand that has been around since the late 1970s. The Powell Golden Dragon has been on the market for over four decades now, and its popularity hasn’t decreased. It’s easy to see why even legends like Steve Caballero recommend these skateboards. Powell is known for having boards that fit every age range and skill level, satisfying the needs of many. It’s also probably the reason as to why the product is surrounded by 5-star reviews.
If you're in the market for a skateboard for your child, there are some general points to keep in mind: A complete skateboard is one that comes fully built, size doesn't matter, and as with all things you buy, you get what you pay for. Conventional wisdom says to go with a good-quality board that will last longer and is safer. Here are some good choices to check out.
Rarely you make notice your deck to lose concavity or flatten over time.  Although this isn’t very common, it’s typically due to water damage and is a sign of many other problems.  Wooden decks are not meant to get wet and they will warp, crack, and break if they get soaked.  It’s pretty simple and straightforward  to avoid this problem.  Keep your skateboard in a dry place, and don’t skate in the rain or through puddles.  Skating through water will also destroy your bearings, if deck warping and breaking wasn’t a good enough reason for you to not do it.
The G & S video ‘Footage’ (created by Mike Hill and Neil Blender and released in 1990 just prior to them leaving to start their own brand) set the precedent for Alien Workshop’s later video aesthetic with the use of non-skate footage intercut throughout the skate sections and the mysterious, almost otherworldly atmosphere that permeates all of Alien Workshop’s subsequent video releases. To many people ‘Footage’ is the pre-cursor to every Alien video release that followed in its wake.
×