Positiv decks are usually maple, but some are hard birch. They are made using the same laminating process and glue that Powell Peralta boards use. These decks have Positiv’s super slide treatment (SST), which is essentially a plastic lining that makes the board slide more easily. The stuff works, and wax becomes less necessary for slides with these boards.
The problem with wheel bite is that it tends to stop the motion of the wheels. This can result not only in a bad wipeout for the rider but also damage to the wheels. With the help of the riser pads, it is easier for you to preserve the deck of your skateboard since these pads can reduce the tendency of having stress cracks on where the trucks and deck meet.
If you are completely new to skateboarding, consider taking a minute to read through the Skateboard Decks Section in our Buyer’s Guide will be helpful, but a good rule of thumb is: the bigger your feet, the wider your board should be. If you wear a size 9 and up, you can’t go wrong with buying an 8” board. Narrow boards are easier to flip while wider boards are more stable, but there are no hard and fast rules to skateboarding. The only way to really find out what you like is by trying new shapes, sizes, and brands. Brands like Welcome, Baker, Chocolate, Deathwish, and Element all have a wide variety of sizes, shapes, and graphics.
However, this same company decided to ‘Cash-in’ on THE NAME BRAND, and now con-currently sells JUNK , made in China, at WAL MART. DO NOT BUY any ‘longboard’ they sell that has plastic trucks!! They are an accident awaiting a place to occur. I’ve seen wheels (from a company that prided itself on ‘the best wheels’) that are upwards of 4 mm out-of-round, which could easily cause speed-wobbles, even at pedestrian speeds. From my POV, they’ve opened themselves up to possibly numerous lawsuits, just because of the inferior quality, and poor design choices made in order to maximize profit.
Bearings are rated by the ABEC scale (1-9), which has nothing to do with skateboarding. Manufacturers know skaters believe higher ABEC ratings mean faster bearings. They do not, and you won’t find high-quality bearings on off-the-shelf skateboards. Most of these completes are slow. Make a bearing upgrade a top priority. Good bearings can make almost any skateboard fast. This article by longtime pro Anthony Pappalardo gives an insider’s perspective on bearings.
Based out of Huntington Beach, California, Good Skateboards is a grassroots inspired skate brand specializing in quality boards. Skateboarding isn’t about what you do, but how you do it. That’s Good Skateboard’s mission and they’re sticking to it! The brand is committed to supplying the skating industry with positive vibes and exceptional products that make you appreciate skateboarding all over again. Good Skateboards decks are constructed from 100% Canadian maple and made in the USA. Their decks are classic in board style and feature fun artwork from artist Vincenzo Colonna. In addition to decks, they also offer branded tees and accessories featuring their iconic “Ok” hand gesture logo. Good Skateboards t-shirts have similar graphics to what you see on their decks. You’ll see the same artwork on their stickers too!
Mark Gonzalez can do no wrong, and as long as he is at the head of Krooked, Krooked will be in the conversation. Krooked has been the Gonz’s brainchild for some time now, always featuring a great selection of his unique style of art and illustration. No brand can be held up by one man alone, and the Gonz has made sure to keep his selection of riders carefully picked, with each one bringing their own offerings to the table. Brad Cromer is not Ronnie Sandoval is not Mike Anderson, yet somehow it all works out and comes together to create one of the best brands out.

If you decide that you don’t want to spend the money for a pro-quality complete, then this is your best bet for a completely blank skateboard.  You’re just not going to find anything else with similar quality anywhere near this price range.  This blank skateboard is an even 8″ with 9 layers of plywood in the deck.  This makes it ideal for any beginner especially adults or children with large feet.  A great option for someone on a budget or if you want to try a no-frills quality skateboard setup, before deciding if you want to invest further on a pro-style skateboard.

Ever notice small vertical or horizontal cracks through your grip tape or by the hardware of your trucks?  These are called stress or pressure cracks and are basically mini fractures of your skateboard deck that typically are seen in the areas of the deck that withstand the greatest impact (around the trucks).  A few pressure cracks is generally no big deal and you won’t even notice them while skating, but they can compound and grow larger and make your deck lose “pop” and increase the chance of snapping.  To avoid pressure cracks, you cant use riser pads underneath your trucks to reduce the level of impact your deck takes.  You should also avoid over tightening your hardware and storing your skateboard in a very humid place as both of these practices can also make your board weaker and more susceptible to pressure cracks.
If you didn’t already know, the “nose” of a skateboard is typically the front and the “tail” is the back.  When you fall or slip and your board slams into curbs, fences, or other hard objects, it’s common for the wooden ends to chip or become damaged upon impact.  Over time these chips can make it harder to preform tricks and even just cruise around.  These chips can be prevented by buying a carbon fiber or non-wood deck, or by there are some metal edges available that can be installed on the nose and tail.
First off, it’s important to decide what you will be using your skateboard for and what you will be doing with it. That’s why it’s important to ask a few key questions: Are you going to be using it every day? Is it for a new hobby? Is it for competition practice? What surface will you be skating on? Will you be partaking in park skating, or street skating?

For the latest in skateboard clothing, fashion clothing and accessories, you have come to the right place here at SkateHut. We are the number one online skate shop and we are product leaders in all things skate – and that includes one of the most extensive collections of skate clothing around! Shop online today for a full range of skate clothes; browse our website for everything from hoodies and outerwear to t-shirts and tank tops, shirts and jeans to hats, belts and accessories. We offer stylish skateboard clothing for babies and toddlers, kids and adults so you can find skate clothing for the entire family. Browse online for the best skate brands and clothing brands around including Vans, MPG, Puma, Neff, Oakley, DC, WeSC, Aplinestars, Santa Cruz, Under Armour, Nike and many, many more. To view the full range, shop now and filter by product at your own convenience and leisure or call our team if you are looking for a specific product or you need help in choosing the right skate clothing for you. With hundreds of styles to choose from, we are confident that you will find the most stylish skateboard clothing to meet your sporting requirements.
There were several artistic skateboarding pioneers that had an influence on the culture of skateboarding during the 1980s, that transformed skateboard-deck art like Jim Phillips, whose edgy comic-book style "Screaming Hand", not only became the main logo for Santa Cruz Skateboards, but eventually transcended into tattoos of the same image for thousands of people and vinyl collectible figurines over the years.[93][94][95] Artist Vernon Courtlandt Johnson is said to have used his artwork of skeletons and skulls, for Powell Peralta, during the same time that the music genres of punk rock and new wave music were beginning to mesh with the culture of skateboarding.[8][96][97] Some other notable skateboard artists that made contribrutions to the culture of skateboarding also include Andy Jenkins, Todd Bratrud, Neil Blender, Marc McKee, Tod Swank, Mark Gonzales, Lance Mountain, Natas Kaupas and Jim Evans.[98][99]
For example, regular skateboards are around 7.5” x 31”-8.5” x 32.5”, while skateboards for children are commonly sized 7”x28”. This ensures that young kids won’t be overwhelmed with the design of bigger skateboards from this buying guide. It also helps children ease-in into the skateboarding world, allowing them to see if it’s the right sport for them at an early age.

Skateboards, along with other small-wheeled transportation such as in-line skates and scooters, suffer a safety problem: riders may easily be thrown from small cracks and outcroppings in pavement, especially where the cracks run across the direction of travel. Hitting such an irregularity is the major cause of falls and injuries.[102] The risk may be reduced at higher travel speeds.
Keep in mind how tall you are when choosing a board width. Also consider the kind of style you wish to skate. Most technical skaters (the ones who incorporate advanced flip tricks... like Rodney Mullen) tend to favor boards between 7.5 and 7.75 regardless of how tall or small they happen to be. The upper hand of having a thin board allows for quick rotation. The other side of the spectrum is the "go big" skaters (Jamie Thomas is a classic example of a "go big" guy). Most "go big" guys favor size 8.0 and up. The advantage of a wide heavy board feels more stable under your feet while in mid air and while landing (especially those who have big feet). If your a kid you might want to just stick with a 7.66 or smaller.
In terms of their skateboard output, Palace have released numerous videos online since their inception, including Gangbanging at Ground Zero (2011), Niggaz with Altitude (2013), a Danny Brady welcome clip ‘Definitely Brady‘ in 2014 and most recently, Very Nice in 2016 featuring newer team riders Shawn Powers and early viral internet star Jamal Smith. Palace are currently working on a full-length video.
After riding Powell decks for many years, I was given the opportunity by Michael Furukawa at Skate One Corp. to create my own board brand. This was an honor but I needed a co-pilot for this mission to happen. I asked Mimi Knoop if she would join forces with me and this was the beginning of an all girls skate brand that we called hoopla skateboards.

Modern decks are made with a composite of thin layers of either maple or bamboo pressed into a near symmetrical shape with a nose equal to or longer than the tail. The deck should be concave (subtle U shape) along the whole board with both the nose and tail angled upwards (the "kick" of the board). Conceptually while the skateboard is a platform, it also serves to cup the balls of the skater’s feet with rising sides, nose and tail providing the foundation for pretty much all modern skateboard tricks.
Girl Skateboards, with its distinct “women’s bathroom” logo, is a brand distributed by Crailtap and founded in 1993 mainly by professional skateboarders Mike Carroll and Rick Howard and was created to give pro skateboarders a future. A “Girl” deck is made of seven-ply maple, which is strong and resistant. Decks can be customized in a wide variety of graphics or can feature the “Girl” logo. For those who don’t want to customize, complete skateboards are available that include the deck, wheels, trucks and bearings. Clothing, featuring the Girl logo, are available in a wide variety of styles. Not only does Girl distribute skateboards, but they also make films, videos and more. The Girl team consists of Sean Malto, Brandon Biebel, Andrew Brophy, Mike Mo Capaldi, Cory Kennedy, Rick McCrank, Jeron Wilson, Mike Carroll, Rick Howard, Tyler Pacheco, and Simon Bannerot.

Tony Hawk and Per Welinder developed the Birdhouse Projects Skateboard Company following the decline professional skateboarding saw in the late 1980’s to early 1990’s. Tony Hawk gave the Birdhouse Projects name instant notoriety and made it into one of the professional skateboard brands in the world. Many skaters who have followed Hawk, have faithfully chosen a birdhouse skateboard. Birdhouse grabs the third place spot with their boards that are built to last and also provide maneuverability and for being a top rated skateboard brand.
The list of five best skateboards for beginners will give you a good idea on how to choose the best skateboard for beginners. You can ask assistance from the professional for the tips and tricks to becoming a pro. A good quality skateboard built for beginners can help you learn to ride a skateboard easily and once you are pro, you can advance to intermediate or pro and purchase skateboard for your level. It is an exciting outdoor sport enjoyed by thousands around the world and can serve as a commuting facility to your school, college or workplace.
Isle is much newer to the game than a lot of the other brands mentioned on the list, but that doesn’t mean they don’t deserve the same respect. Drawn straight from the mind of skateboarder Nick Jensen, a London native with the eye of a true artist, Isle’s graphics could just as easily be hanging in a museum rather than in skate shops. Jensen’s creative process involves him sculpting, painting and photographing every board graphic himself in his own studio, manipulating each art piece to work as a graphic. Isle offers one of the most well developed brand images in skateboarding, due in big part to the fact that it is literally an outlet of one man’s own rampant creativity.
Pro decks are what most people are familiar with and what is seen most commonly around skateparks and driveways around the US.  These decks can have a variety of different logos and images on them and sometimes are a specific professional skater’s pro deck.  Pro decks provide skaters a way to support their favorite riders and have the same equipment they see all their favorite pros using.  The quality of professional decks and parts are almost always very high as they have a reputable and brand image to uphold.  For this higher level of quality and you can expect to pay 2-3x the cost of a blank complete.  If you want to save some money and still have a pro look, there are options available that have generic blank parts with a pro deck.  This may be a good option for a beginner skater who is not yet doing complex tricks that may break these cheaper parts, but they still want the look and feel of a pro skateboard.  As the skater progresses they can then switch out these generic parts for higher-end options as necessary.

SkateXS makes skateboards for kids, but the quality of the product is just as high as skateboards for adults. Many parents report their children being incredibly satisfied with the product. The reviews are 90% positive, and it’s easy to see why so many family members and friends turn to buying this skateboard for their young ones. Read on for more to consider when buying a skateboard for beginners.
Ever notice small vertical or horizontal cracks through your grip tape or by the hardware of your trucks?  These are called stress or pressure cracks and are basically mini fractures of your skateboard deck that typically are seen in the areas of the deck that withstand the greatest impact (around the trucks).  A few pressure cracks is generally no big deal and you won’t even notice them while skating, but they can compound and grow larger and make your deck lose “pop” and increase the chance of snapping.  To avoid pressure cracks, you cant use riser pads underneath your trucks to reduce the level of impact your deck takes.  You should also avoid over tightening your hardware and storing your skateboard in a very humid place as both of these practices can also make your board weaker and more susceptible to pressure cracks.

Element has also diversified their business model with ventures into retail with Element stores across the globe, advocate programs supporting artists such as Thomas Campbell and Fred ‘French Fred’ Mortagne, Women’s fashion through the Element Women’s range and the most cohesive approach to supporting European skateboarding of any brand in the industry through their dedicated European team.
×