Freestyle skating remained healthy throughout this period, with pioneers such as Rodney Mullen inventing many of the basic tricks that would become the foundation of modern street skating, such as the "Impossible" and the "kickflip". The influence that freestyle exerted upon street skating became apparent during the mid-1980s; however, street skating was still performed on wide vert boards with short noses, slide rails, and large soft wheels. In response to the tensions created by this confluence of skateboarding "genres", a rapid evolution occurred in the late 1980s to accommodate the street skater. Since few skateparks were available to skaters at this time, street skating pushed skaters to seek out shopping centers and public and private property as their "spot" to skate. (Public opposition, in which businesses, governments, and property owners have banned skateboarding on properties under their jurisdiction or ownership, would progressively intensify over the following decades.)[40][41] By 1992, only a small fraction of skateboarders continuing to take part in a highly technical version of street skating, combined with the decline of vert skating, produced a sport that lacked the mainstream appeal to attract new skaters.
In 2003 Go Skateboarding Day was founded in southern California by the International Association of Skateboard Companies[53] to promote skateboarding throughout the world. It is celebrated annually on June 21 "to define skateboarding as the rebellious, creative celebration of independence it continues to be."[54][55][56][57][58] According to market research firm American Sports Data the number of skateboarders worldwide increased by more than 60 percent between 1999 and 2002—from 7.8 million to 12.5 million.[59]

Great option for a beginner who wants a pro deck and doesn’t mind non-pro branded parts.  Enjoi is very well known by skateboarders and the panda logo will be recognized everywhere.  This particular deck is 7.75″ wide which is why I think it’s the best as it can be skater by any size person comfortably.  One slight downside to this setup is that the board comes unassembled, however many skaters enjoy putting together their own skateboards and it can be done in just a few minutes by following a YouTube video.  You won’t go wrong with such a well-respected brand and average size, this is actually the exact skateboard I decided to buy for my nephew a few years ago and he absolutely loved it!


Browsing decks online is best when you're looking the actual brand's website, rather than a retailer that carries a lot of different brands. The company site usually gives you a taste of what the brand is all about, in addition to what their decks look like. A lot of brands have their own skateboarding teams. If you happen to like a rider on a team, that can give you a strong connection to a brand (and they'll probably have a deck with your favorite rider's name on it). You also might be drawn to a particular philosophy of the brand or a specific design or construction feature used on their decks. For example, some companies are known for killer graphics, and some play around with different materials to give their decks unique performance characteristics. 
Grind King skateboard trucks are the best trucks available for grinding. The truck hangar is made from aluminum, making it softer and weaker, but better for grinding. This means you will have to replace them faster if you grind, but your grinds will be smoother and better. Grind King trucks do use special hex-head kingpins, so you will need a special tool to adjust them.

It comes with a plastic board deck, which is small in size, making it ideal for riders who need a really sturdy skateboard. It is more suitable for both experts and beginners who want to learn new tricks in skateboarding. The fact that it is stable and small makes it good for kids, too. It promotes ease in riding and controlling it in a crowded street. This complete skateboard is lightweight, too, allowing you to carry it almost everywhere.
Hi Everyone! My name is Pete (yes, I’m a real person who lives in a cornfield just outside of Buffalo, NY – well, my house is in the middle of a cornfield!). As a former collegiate athlete in Iowa, I’ve played varsity basketball, volleyball and soccer. I also happen to be an outdoor adventure fanatic who’ll do whatever it takes to never miss my annual week-long wilderness canoe trip in the Northern Ontario wilderness. Sports equipment has come a long way over just the past few years, and I’d love to share with you the latest (and most competitively priced) products that will save you many of the frustrations I’ve dealt with over the years! Please feel free to cruise the site and drop me a line on the contact page if you have ideas for improvements or anything else!
With distinctive graphics, often touching upon controversial issues such as racism with American society such as the infamous Jim Thiebaud ‘Lynch the KKK’ graphic designed by Natas Kaupas and Kevin Ancell, and classic Jeff Klindt graphics such as the James Kelch ‘James’ board, which was recently re-released, Real’s aesthetic has always been instantly recognisable.

Element has also diversified their business model with ventures into retail with Element stores across the globe, advocate programs supporting artists such as Thomas Campbell and Fred ‘French Fred’ Mortagne, Women’s fashion through the Element Women’s range and the most cohesive approach to supporting European skateboarding of any brand in the industry through their dedicated European team.


Many parents and grandparents visit SkateXS for their young one’s first “real” skateboard with the same fundamental quality questions. I realized we could certainly do a better job of making sense of it all! So with a bit of karmic appeal that someone will someday finally explain unicycles to me, here is a summary of something we actually know a thing or two about! 
Minority Maple Skateboard is an aesthetically engineered, quality starter skateboard. It is solid to the core. It is made with 7-ply hard rock maple cold pressed into 32×8-inch deck. It is built to endure weight up to 220 lbs. Its mediate concave design makes it perfect for performing tricks with ease and dexterity. Its 5-inch long trucks made with genuine aluminum alloy makes it an epitome of strength and endurance. Its carbon steel kingpin and 78A high rebound PU bushing adds to its strength. ABEC-9 precision bearings are manufactured using chrome steel with 52mm 102A PU wheels making the Minority Maple Skateboard a speedster.

“As far as the actual look of the vast majority of contemporary graphics goes, I’d say that it feels to me as if something has been lost. It’s down to what you can do with modern heat transfer printing techniques – you can literally just take a photograph from the Internet and print it identically straight onto a skateboard. Speaking personally, there’s very little to challenge you there: either from the point of view of creating graphics, or from the consumer’s perspective. Whereas back when screen-printing was the norm, every time a graphic was produced the artist was physically cutting the key line out by hand. The key line is the final black line that forms the outline of whatever it is that you’re printing and ties in all the other colours together. You can see this in the early Sean Cliver graphics for example, where it’s clear that he has hand cut the key lines as precisely as he was able to, but looked at from today’s perspective they’re not perfectly precise, which is what gives Cliver’s earliest stuff its specific look in my opinion.”

^ Jump up to: a b Rosenberger, Robert (June 19, 2014). "How Cities Use Design to Drive Homeless People Away: Saying "you're not welcome here"—with spikes". The Atlantic. The Atlantic Monthly Group. Archived from the original on July 1, 2014. Retrieved April 23, 2017. An example of an everyday technology that’s used to forbid certain activities is “skateboard deterrents,” that is, those little studs added to handrails and ledges. These devices, sometimes also called “skatestoppers” or “pig ears,” prevent skateboarders from performing sliding—or “grinding”—tricks across horizontal edges. A small skateboard deterrence industry has developed, with vendors with names like “stopagrind.com” and “grindtoahault.com.”
Following stints on the US brands Mad Circle and Arcade and a pro model on the then hugely popular European brand Cliche skateboards, Pontus Alv quit his board sponsor and moved back to his hometown of Malmo, Sweden in the early to mid 00’s. During this time Pontus took what might be called a creative hiatus but which would be more accurately explained as a re-connection with his roots. After returning to Malmo, Alv became heavily involved in building and creating the scene there, working alongside friends to build a number of DIY skatespots through the city such as the now legendary Savanna-side and Steppeside projects.
Pro Skateboarder, Jamie Thomas developed the Zero brand in Carlsbad, CA and has built it into one of the top skateboard brands. Though the Zero brand initially distributed clothing, it eventually evolved to boards designed to suit the need for any tricks performed. The Zero team is comprised of a close group of skateboard professionals that have turned their passion into a company dedicated to provide the latest in skateboard innovation and helped Zero Skateboards become a fantastic skateboard brand. Zero boards are great for maneuvers, stability and especially grinds, with their specially designed features. Their innovation and high-quality designs has made Zero Skateboards one of the good skateboard brands today.

This deck is 6-inches-by-22.5-inches with that classic cruiser shape. The board is made with 6-ply bamboo and maple construction, which is lightweight, flexible, and eco-friendly. Bamboo Skateboards claims this board has a turning radius not seen in most mini decks. The small, blank deck is heavy duty and durable in a way not all mini cruisers are. This non-carbonized board is ready for you to slap on the grip tape and artwork you want and then get riding.
Graphically speaking, Welcome is very distinctive, with an emphasis on hand drawn imagery and references to esoteric and occult themes mixed with bright colourways. Welcome Skateboards also offer a detailed shape guide on their website, detailing the exact dimensions of all of their 38 custom shapes, which again differentiates their product from many of the skateboard brands on the market.
This deck is 6-inches-by-22.5-inches with that classic cruiser shape. The board is made with 6-ply bamboo and maple construction, which is lightweight, flexible, and eco-friendly. Bamboo Skateboards claims this board has a turning radius not seen in most mini decks. The small, blank deck is heavy duty and durable in a way not all mini cruisers are. This non-carbonized board is ready for you to slap on the grip tape and artwork you want and then get riding.
Emerging initially via a series of spoof news bulletins created by Lev Tanju called ‘PWBC Global Skateboard News‘ and hosted on the don’twatchthat.tv site, the aesthetic that the Palace Skateboards Brand would adopt was firmly established in these early videos. Sadly now mostly deleted from the Internet, aside from a few ‘best of’ videos, the PWBC News series were a pre-cursor for the route that the brand would adopt with its comedic take on the faux-seriousness of the Skateboard Industry of the time, an emphasis on the UK grime music scene, and the introduction of numerous characters within each news segment, including Francis Shower Face who still appears in Palace releases to this day, along with snippets of footage from various sources.

There were several artistic skateboarding pioneers that had an influence on the culture of skateboarding during the 1980s, that transformed skateboard-deck art like Jim Phillips, whose edgy comic-book style "Screaming Hand", not only became the main logo for Santa Cruz Skateboards, but eventually transcended into tattoos of the same image for thousands of people and vinyl collectible figurines over the years.[93][94][95] Artist Vernon Courtlandt Johnson is said to have used his artwork of skeletons and skulls, for Powell Peralta, during the same time that the music genres of punk rock and new wave music were beginning to mesh with the culture of skateboarding.[8][96][97] Some other notable skateboard artists that made contribrutions to the culture of skateboarding also include Andy Jenkins, Todd Bratrud, Neil Blender, Marc McKee, Tod Swank, Mark Gonzales, Lance Mountain, Natas Kaupas and Jim Evans.[98][99]


SkateXS is a very popular brand among parents that have kids that are enthusiastic about skating. They have a variety of skateboards, plenty of color choices and even add a name tag of your child on the grip tape. This helps the child feel like they have full control over the board and its development. This, in turn, will make them treasure it more.
Phantom 2 trucks have a low profile, are lightweight and have a nice smooth edge for grinding. They also just look nice. The thing that sets Phantom trucks (both regular Phantoms and Phantom 2s) are their built in shock pads. Phantom calls it an "Impact Dispersion System," a 1.5 mm rubber shock pad built onto the bottom of the trucks. Shock pads help reduce stress from the trucks to the board.

If you want to do cruising and street style on the same board then you probably want a large board and larger wheels, as many have already commented. I think that an 8 inch board with at least 56 mm wheels will be best. I think that you should find a local shop to support and to talk to about gear. I would advise getting a shop deck, with Independent trucks (at the correct width for your board, which is one detail that a local shop should be able to help with) Bones street tech formula wheels (I like profiles 1 and, I think 5), and Bones Reds bearings (not super reds, super reds are not super).


George Powell continued in business as the Powell Corporation and the brand released numerous videos throughout the 90’s and 00’s, including titles such as Suburban Diners (1994), Scenic Drive (1995) and FUN (2009), whilst simultaneously kick starting the careers of many skaters who went on to become household names such as Chris Senn, Adam McNatt and the UK’s own Danny Wainwright, along with stalwart Bones Brigade member Steve Caballero who stayed with the Powell brand throughout.


FTC was cool before there were skate and hype blogs around to tell you that they were cool. Mastermind Kent Uyehara built his brand from the back of a sporting goods shop into an international symbol of cool, with franchise locations in Sacramento, Tokyo, and Barcelona. FTC isn't just the go-to spot for skate gear in those cities-it's a full-blown brand that any skater would be proud to wear.

^ Jump up to: a b c d e f "Skateboarding" (PDF). Pennsylvania Avenue National Historic Site Management Plan: Visitor Information, Education and Enjoyment. Washington, D.C.: National Mall and Memorial Parks: National Park Service: United States Department of the Interior. April 2014. pp. 24–25. Archived from the original (PDF) on March 4, 2017. Retrieved March 29, 2017. Skateboarding damages stonework, walls, steps, and sculpture in some areas and presents a persistent law enforcement and management challenge. Damaged areas include stone facing on memorials, benches, and other surfaces. Moreover, popular websites advertise the attractiveness of these areas for skateboarding, which indicates the large scope of this challenge. .... Actions: .... In park areas replace and maintain “No Skateboarding” signs that have been vandalized.
There are actually several types of skateboards but the most common ones are the longboard, cruiser, and carve skateboards. A longboard is usually at least 33 inches. It is a great mode of transportation and works well for cruising around. The cruiser also works well as a mode of transportation but many consider it more beneficial as it has a shorter skateboard, which promotes ease in transporting around.
See, not all boards are actually bidirectional. Most have a thick tail and a small nose but not this board. So if you’re a switch skater then this board brand is perfect for you. The urethane wheels are designed for the high stress environments and provide the top speed available. The deck tape provides the perfect grip even for those of us with older shoes that are essentially smooth on the bottom.
Somehow, in the great effort to fight societal conformity, skateboarding always manages to create its own conformity. Trends in styles of skating and fashion come and go. A brand gets hot for a year or two because it's on trend, then it fades to make way for the next thing. Welcome Skateboards doesn't give a fuck about all that. Yes, they are a little weird. The graphics are vaguely Illuminati, and they can't seem to make a normal shaped deck, but that's just Welcome doing its own thing, and who wouldn't welcome that?

For the latest in skateboard clothing, fashion clothing and accessories, you have come to the right place here at SkateHut. We are the number one online skate shop and we are product leaders in all things skate – and that includes one of the most extensive collections of skate clothing around! Shop online today for a full range of skate clothes; browse our website for everything from hoodies and outerwear to t-shirts and tank tops, shirts and jeans to hats, belts and accessories. We offer stylish skateboard clothing for babies and toddlers, kids and adults so you can find skate clothing for the entire family. Browse online for the best skate brands and clothing brands around including Vans, MPG, Puma, Neff, Oakley, DC, WeSC, Aplinestars, Santa Cruz, Under Armour, Nike and many, many more. To view the full range, shop now and filter by product at your own convenience and leisure or call our team if you are looking for a specific product or you need help in choosing the right skate clothing for you. With hundreds of styles to choose from, we are confident that you will find the most stylish skateboard clothing to meet your sporting requirements.
Top Skateboards come from companies such as Blind Skateboards. Professional skateboarder Mark Gonzales founded the brand and it was launched in 1989. Today, products are distributed by Dwindle Distribution. The brand is intended for serious, hardcore skateboarders. It has an emphasis and an appreciation for the graphics used for its decks. In the early 1990s, Blind Skateboards set itself apart from other skateboard brands by creating videos. Their first, directed by Spike Jonze, appeared in 1991. You can get completes at Blind that includes the decks, wheels, trucks, and bearings. The Blind Team is professional skateboarders Cody McEntire, TJ Rogers, Kevin Romar, Sewa Kroetkov, Morgan Smith, Sam Beckett, Micky Papa, Yuto Horigome, and Jason Thurtle.
Let’s now move on to our top pick from the Punisher line, the Punisher Cherry Blossom Complete skateboard (31 inch). Hands down, the Punisher Cherry Blossom skateboard is the best skateboard for girls. And I am not just saying this because the cherry design would look best for girls, it has some incredible features and specifications. We love the 9-ply stiff maple deck with a beautiful cherry design. The deck is also covered with coarse grip tape which gives the skateboard excellent grip and it makes it a good ride for girls too.
You guys must have noticed that we have an absolute adoration for boards that not only ride smooth but are also easy on the eyes. Plan B covers the graphics of skateboards quite well, with its own unique style and color schemes. Some of the examples of their visual masterpieces are, the Riot Cole (with the Plan B logo embedded in different art schemes) and the Anatomy Cole 8 (with individualistic graphics).

If you're in the market for a skateboard for your child, there are some general points to keep in mind: A complete skateboard is one that comes fully built, size doesn't matter, and as with all things you buy, you get what you pay for. Conventional wisdom says to go with a good-quality board that will last longer and is safer. Here are some good choices to check out.

Many of the most popular skateboard brands sponsor teams of skaters, like Zero's Jamie Thomas and Element's Barn Margera. Professional skaters are often good sources of information as to what skateboard you should buy. If a pro skater rides a certain board, there is a good chance that if he or she finds that it is high enough quality you will also like the board. Users looking for a new skateboard will want to research a variety of different brands to find the one that best suits their needs, based on function and features.

Our personal favorite is the Penny Australia Classic Complete Skateboard and trust me when I tell you this, it is the best skateboard for beginners. Hands down, we love how it is amazing to look at, very portable, excellent speed and has the greatest parts like hard wheels, 7 ABEC bearings and high tensile bolts. We love this board so much that it forms part of our best skateboards 2018 list as well.


Finally, consider the type of grip tape you'll want on the board. While function is important in this regard to give your feet ample support, there's nothing wrong with adding some bling to the board's surface either. Many skateboard retailers will offer you several choices of grip tape and board styles, so it's definitely important to ask a lot of questions.
Alien Workshop is a Dayton, Ohio based company, established by Chris Carter, Neil Blender and Mike Hill in 1990. They have gone through several ownership changes, including a period of being owned and operated by Burton Snowboards, but have persevered and become one of the top skateboard brands today. Alien Workshop has faced several turbulent challenges with varying outcomes, however they have remained dedicated to providing a high quality, yet also affordable boards. We like Alien Workshop for their innovative designs and conscience effort to make a great board, that many can afford. Their high quality boards has allowed them to become one of the best rated skateboard brands today.
So now that you have an idea of what size and shape board you like, it’s time to choose a brand. A popular size is an 8.5 skateboard deck. If you were looking for a size 8.5 skateboard deck, you could narrow the decks offered on CCS.com to fit in the 8.25 - 8.5 range. This will show you all the boards in that range, and significantly reduce the boards you have to look through. Now, if you don’t have a preference on board brands, find a graphic you like and you’re all set. If this is your first skateboard or are still learning about what wood and brands you prefer, we recommend checking out a CCS Skateboard. They give you a bang for your buck, that's for sure.
A precursor to the extreme sport of street luge, that was sanctioned by the United States Skateboarding Association (USSA), also took place during the 1970s in Signal Hill, California. The competition was called "The Signal Hill Skateboarding Speed Run", with several competitors earning entries into the Guinness Book of World Records, at the time clocking speeds of over 50 mph on a skateboard. Due to technology and safety concerns at the time, when many competitors crashed during their runs, the sport did not gain popularity or support during this time.[36][37]
Skateboard hardware is used to connect the skateboard trucks to the skateboard deck. Skateboard hardware refers to the bolts and locknuts used when building a board. The bolts can have an Allen or Phillips head. Skateboard hardware comes in many different lengths, and often includes one different colored bolt so that the rider can mark the nose of their board.
Unique Designs: The unique designs of Globe skateboards make them one of the most innovative and unique skateboard companies in the world today. They were professional skateboarders who began their business because they were not satisfied with the quality of boards available. With Globe, that changed. You can now count on reliable, unique designed boards.

The grip tape found on a skateboard can actually be defined as the grainy sheet, which resembles sandpaper that also comes with a sticky underside. Such underside needs to adhere to the deck’s surfaces as a means of increasing traction or grip. No matter what skating style you use, the grip tape is extremely helpful in your attempt to stay on the board.
Freedom Plaza has become a popular location for skateboarding, although the activity is illegal and has resulted in police actions.[5][115] A 2016 National Park Service management plan for the Historic Site states that skateboarding has damaged stonework, sculptures, walls, benches, steps, and other surfaces in some areas of the Plaza.[5] The management plan further states that skateboarding presents a persistent law enforcement and management challenge, as popular websites advertise the Plaza's attractiveness for the activity.[5] The plan notes that vandals have removed "No Skateboarding" signs and recommends the replacement of those signs.[5]
Founded in 2008 in Pennsylvania, Punisher’s goal has been to make graphically pleasing skateboards that have designs that resonate with the rider on a deeper level. Each artist is handpicked by Punisher to design an original, unique image that is then incorporated into the skateboard. The fantastic graphic designs combined with the quality of the skateboard itself make for a very personalized riding experience.
Goldfish and Mouse established Girl’s video aesthetic with numerous movie skits inter-cut with the skating, including the infamous Eric Koston as Charlie Chaplin skit. Pioneering skate photographer and film-maker Spike Jonze (also responsible for Blind Skateboard’s Video Days) as a part-owner of Crailtap has been involved in the making of all of their videos to date and it is his cinematic approach that lends Girl’s video output its uniqueness.
×