Regardless of the length of these boards, they each have several components in common that include a deck, grip tape, trucks, and wheels. The deck is the actual surface piece of the board on which a rider stands to perform tricks or control their degree of motion. Decks range between seven and ten inches in width and although seven-ply wood is the most common material for them, they can also be crafted out of bamboo, carbon fiber, and even plastic. Decks are shaped in several unique concave designs, which include radial, progressive, W-concave, tub, and asymmetric. Radial concave decks have U-shaped curves and are ideal for beginners, as they provide one's feet with a reliable grip.

That’s a lot of wood! But it is by no means the end. In 2016 there were many other brands that have pleased us with wooden works of art. Chocolate were inspired by modern living shown in their Modern Homes series, Welcome beautifully presented decks in original shapes, and the two German brands Inpeddo and Mob showed that seven layers do not necessarily have to come from overseas.
If you didn’t already know, the “nose” of a skateboard is typically the front and the “tail” is the back.  When you fall or slip and your board slams into curbs, fences, or other hard objects, it’s common for the wooden ends to chip or become damaged upon impact.  Over time these chips can make it harder to preform tricks and even just cruise around.  These chips can be prevented by buying a carbon fiber or non-wood deck, or by there are some metal edges available that can be installed on the nose and tail.
A good helmet protects your most important vital organ. Remember that in some states helmets are required by law. In Oregon, for example, skaters 15 and under can be fined for not wearing a helmet. Knee and elbow pads will also save you from bumps and bruises. Knee pads are particularly valuable when learning to skate tall vertical walls because they allow you to slide down the wall on your knees instead of having to run out of every bailed attempt. Wrist and ankle injuries are common in skateboarding, so braces are another great investment.
It is a mini-cruiser, which is known for its strength as well as its ability to offer real value for the money you spent. This skateboard can also be expected to deliver an impressive performance – thanks to the Abec 7 skatro bearings used in it. There are also 59-mm urethane wheels and the 3-inch GOLD aluminum trucks that can help smoothen each ride.
Distributed by NHS, Inc., Creature Skateboards was launched in 1994 by professional skateboarders Russ Pope, Jason Adams, Barket Barrett and Darren Navarrette. The company was revived in the mid-2000s. Creature is known for its horror themes on its skateboards and clothing. The company offers complete skateboards that include the decks, wheels, trucks, and bearings as well as customizable decks, and accessories. The Creature team includes 19 professional skateboarders. In addition to Navarrette, the roster includes such names as Al Partanen, Chris Russell, Cory Juneau and David Gravette.
In an industry as diverse as skateboarding, the sheer number of skateboard brands on the market can be bewildering. With a seemingly never-ending amount of new brands emerging, alongside the numerous pre-existing ones, the market can certainly appear over crowded and confusing at times, which is hopefully where this list of some of our favourite skateboard brands comes in.

Rarely you make notice your deck to lose concavity or flatten over time.  Although this isn’t very common, it’s typically due to water damage and is a sign of many other problems.  Wooden decks are not meant to get wet and they will warp, crack, and break if they get soaked.  It’s pretty simple and straightforward  to avoid this problem.  Keep your skateboard in a dry place, and don’t skate in the rain or through puddles.  Skating through water will also destroy your bearings, if deck warping and breaking wasn’t a good enough reason for you to not do it.
Over the years skateboard-deck art has continued to influence and expand the culture of skateboarding, as many people began collecting skateboards based on their artistic value and nostalgia. Productions of limited editions with particular designs and types of collectible prints that can be hung on the wall, have been created by such famous artist as Andy Warhol and Keith Haring. Most professional skateboarders today have their own signature skateboard decks, with their favorite artistic designs printed on them using computer graphics.[100][101]
Remember don't get those cheap skateboards from Walmart. They won't hold up to any skating and can break from a single ollie that is landed improperly. I know they are cheap, but 2 cheap boards a week for a few weeks adds up to the price of 2 or 3 expensive boards. These boards are also heavier and slow which makes them much more difficult to do tricks on.
Also called the mounting hardware, the skateboard hardware is useful in connecting the trucks to the deck. Every truck is actually in need of 4 bolts and locknuts. If you are planning to buy hardware for your custom skateboard, then note that they are often sold in sets composed of 8 parts, though it is also possible for you to buy individual parts separately when required.

Covering multiple countries all over the world, Skatro is widely received as one of the top mini-cruiser suppliers that are in existence. Starting from a very small office and humble beginnings, Skatro brand was determined to provide excellent care and respect to their clients while maintaining a quality product that is both mechanically sound as well as financially viable.


Here's a list of the best skateboard truck brands (read about Trucks in the Skateboard Dictionary). Trucks can be expensive, and picking out the right set of skate trucks can seem tough. But, if you get a pair of trucks off of this list, you should be good. There are other brands that are good quality too, but each of these brands has something that helps it to really stand out. These aren't put in any particular order.

So now that you have an idea of what size and shape board you like, it’s time to choose a brand. A popular size is an 8.5 skateboard deck. If you were looking for a size 8.5 skateboard deck, you could narrow the decks offered on CCS.com to fit in the 8.25 - 8.5 range. This will show you all the boards in that range, and significantly reduce the boards you have to look through. Now, if you don’t have a preference on board brands, find a graphic you like and you’re all set. If this is your first skateboard or are still learning about what wood and brands you prefer, we recommend checking out a CCS Skateboard. They give you a bang for your buck, that's for sure.
Fox and Deacon re-branded Deathbox in 1991 as Flip skateboards and announced the four man team as consisting of Geoff Rowley, Rune Glifberg, Andy Scott and Tom Penny. After nearly being put out of business when a flood destroyed much of their stock, Fox, Deacon and the four team riders began to plan their move from the UK to Huntington Beach, California in order for the brand to grow further.

Element, based out of Irvine, CA, is one of the cool skateboard brands today. They came in first on our list due to their quality boards, sustainable practices and the affordability they offer customers. They’re an environmentally responsible brand who creates their boards without causing any environmental damage. The Element team behind the company is comprised of a group of professional skateboarders who interact with a strong belief in the Element brand. They not only offer great products, but stand for an open minded and active lifestyle and have become one of the best skateboard brands in the world.
You know how people say shit like: Ernest Hemingway is “a writer's writer” and it's not really clear what that means, but you sort of get it? Well Anti-Hero is a skater's skate brand. Founded by underground hero pro skater Julien Stranger, Anti-Hero is a direct expression of his attitude towards the skate industry, which is basically that skateboarding is life and fuck everything else. Anti-hero has a reputation for being one of the gnarliest skate brands around, thanks in part to their team of heavies which includes John Cardiel, Tony Trujillo, and Chris Pfanner.
×