Buy a quality deck. Decks available at your local department store are usually of low quality and have pictures of cartoon characters on the bottom. If you want an entire board, but don't know exactly what you want, buy a complete skateboard from a company or go to a skate shop and ask the employee about the products. If you want to ride on the streets, get a 7.5 to 8.0 deck, if you want to ride vert, 8.0 and up is probably best. However, it's all personal preference. People street skate all the time with decks over 8.0.

Individuality and a self-expressed casual style have always been cultural values for skateboarders, as uniforms and jerseys are not typically worn.[88] This type of personal style for skateboarders is often reflected in the graphical designs illustrated on the bottom of the deck of skateboards, since its initial conception in the mid seventies, when Wes Humpston and Jim Muri first began doing design work for Dogtown Skateboards out of their garage by hand, creating the very first iconic skateboard-deck art with the design of the "Dogtown Cross".[89][90][91]
This past year, they dropped the insant classic VHS series of decks, playing off of the nostalgia of old blank VHS tapes used to film back in the 90’s, creating a high demand for restocks in skate shops across the world. This series almost singlehandedly brought them back in the forefront of skating to the world beyond New York, and we can only wait to see what they’ll do next.
That Captain America-esque deck, though, is where the real magic happens. It uses Plan B’s Blk Ice tech, which means it’s lighter than your average board, stronger than standard 7-ply maple, and it’s built to slide and pop like no other without any need to add wax. This also makes it more consistent; no extra slippery or sticky spots, just a smooth ride.
The use of skateboards solely as a form of transportation is often associated with the longboard.[108] Depending on local laws, using skateboards as a form of transportation outside residential areas may or may not be legal.[109] Backers cite portability, exercise, and environmental friendliness as some of the benefits of skateboarding as an alternative to automobiles.
Bearings are standardized to fit in all kinds of skateboard wheels. All bearings will eventually get dirt and gunk in them which slows you down. Regular cleaning is recommended. Higher quality bearings will perform better, roll faster, retain more speed, and last longer when cleaned regularly. Some bearings come with bearing spacers or have spacers built into the bearing. These will fit in any wheel, but are not necessary for most types of skateboarding or longboarding.
Element Skateboards are also one of the most popular and best skateboards in the world of boarding. If you choose to purchase it, you will get high-quality skateboards that will stand the test of time. The best thing about them is environmental friendliness that they promote along the way. Therefore, you will enjoy in Driftwood deck, which are much more affordable and lighter.
With Board Blazers LED Cheap Skateboards, you can quickly customize your ride.  There’s no need for any bulky battery pack or wires.  You just need to place the lights under the trucks to do the tricks.  Now, you can cruise safely with style.  It is self-adhesive and every light comes with small, long-lasting, and easily replaceable lithium batteries.  The on/off activation is controlled manually. It includes a set of 4 lights with the matching color.  It is best for all types skateboards, longboards, and scooters. It is the perfect gift for anyone.  It is the most trusted product with a rating of 4.5 on Amazon.
^ Jump up to: a b c d e f "Skateboarding" (PDF). Pennsylvania Avenue National Historic Site Management Plan: Visitor Information, Education and Enjoyment. Washington, D.C.: National Mall and Memorial Parks: National Park Service: United States Department of the Interior. April 2014. pp. 24–25. Archived from the original (PDF) on March 4, 2017. Retrieved March 29, 2017. Skateboarding damages stonework, walls, steps, and sculpture in some areas and presents a persistent law enforcement and management challenge. Damaged areas include stone facing on memorials, benches, and other surfaces. Moreover, popular websites advertise the attractiveness of these areas for skateboarding, which indicates the large scope of this challenge. .... Actions: .... In park areas replace and maintain “No Skateboarding” signs that have been vandalized.

I have a dream to hook up some of the world’s best skateboarders, and make everybody know and love this awesome sport! So, in the summer of 2017, I launched SkatesZone with little more than a dollar and want it to become an interesting place for all skaters where you can find a plenty of skateboards information, tips & tricks, instructions, and more.


Hanna-Barbera, DC Comics and Todd Francis – at Almost, childhood dreams come true. But on the top sheet, however, is no place for childishness: Willow, Haslam, Song, Mullen and Co. are ripping it on these decks and can hardly be surpassed in ability. To provide the needed strength for the guys Almost has invented the innovative Impact Technology. The two lost places are a minor matter because Almost makes their own thing anyway. Up to 8 layers are available from 62.99 € | 55.00 GBP!
The deck will also have a material on top called grip tape. This textured surface is what keeps your shoes from sliding all over the place as you ride. Look for a very high-quality grip tape for extra stability as you are learning, or something that is very visibly textured (like the waffletop from the pennyboard on our list above). You can also replace the grip tape if you love a board but don’t love the grip tape it comes with.
Skateboarding damages urban terrain features such as curbs, benches, and ledges when skateboarders perform "grinds" and other tricks on these surfaces.[112] Private industry has responded to this problem by using skate deterrent devices, such as the Skatestopper, in efforts to prevent further damage and to reduce skateboarding on these surfaces.[112]

In 1976, skateboarding was transformed by the invention of the ollie by Alan "Ollie" Gelfand. It remained largely a unique Florida trick until the summer of 1978, when Gelfand made his first visit to California. Gelfand and his revolutionary maneuvers caught the attention of the West Coast skaters and the media where it began to spread worldwide. The ollie was adapted to flat ground by Rodney Mullen in 1982. Mullen also invented the "Magic Flip," which was later renamed the kickflip, as well as many other tricks including, the 360 Kickflip, which is a 360 pop shove-it and a kickflip in the same motion. The flat ground ollie allowed skateboarders to perform tricks in mid-air without any more equipment than the skateboard itself, it has formed the basis of many street skating tricks. A recent development in the world of trick skating is the 1080, which was first ever landed by Tom Schaar in 2012.[73][74]

In terms of their skateboard output, Palace have released numerous videos online since their inception, including Gangbanging at Ground Zero (2011), Niggaz with Altitude (2013), a Danny Brady welcome clip ‘Definitely Brady‘ in 2014 and most recently, Very Nice in 2016 featuring newer team riders Shawn Powers and early viral internet star Jamal Smith. Palace are currently working on a full-length video.
I really recommend searching up a local skate shop man. Get a shop deck instead of a company deck ya you look cool.with a gold primitive deck but all skateboards do the same thing.shop decks are much more cheaper With really good quality wood too, your shoe size don't matter at all my friend is 6' with a size 13 shoe and rides a7.75 lol. But the smaller the board the easier to flip the board with tricks. A more wider board gives you more room to land on doing stairs and gaps. Me i ride a8.25 i love it but at times i feel like riding an 8.1. Most local shops will give you a free sheet of griptape instead of wasting like 10$ on one. Trucks i recommend thunder hollow lights. They're so light on you skateboard and are durable. Hardware are the bolts that hold it all together i really like having colored ones so i can tell the nose and tail of the board. Wheels get spitfire man street tech formulas i love them so much about 25$ though. It's worth it tho. Bearings you can spit fire bearings too thet are ok but the more expensive the bearings the better. There's also bones red bearings another great bearing brand. In total cost bro it should come to around 120$ or just a slight bit more. For skate shoes always get sued shoes they last way longer and have better grip. To learn the basic tricks go to YouTube and look up braille skateboarding. He teaches you the basics very clearly and detailed where to put your feet and stuff. Not only that YouTube channel look at different skate videos youll get inspired to land that trick too. Skateboarding is sick bro no one tells you how to skate you know it's pure freedom. Hopefully you get a mean Ass setup man and get to skating!!! Remember skate or die !!!!
Ancheer 31″ Pro Skateboards are made of 7-ply maple wood and finished with anti-slip grip tape.  It includes 60mm PU wheels ideal for riders who want to carve out sections, obtain speed and higher off the ground for tricks. It features 6″ Tony Hawk Signature aluminum trucks and 32″ long deck with double kick tail which is ideal for perfecting your favorite tricks.  It comes with ABEC-7 skateboard bearings.  It has style and quality which is expected from the most influential skateboarders of all time.  It is one of the best-rated skateboards on Amazon with a rating of 4.8.
With distinctive graphics, often touching upon controversial issues such as racism with American society such as the infamous Jim Thiebaud ‘Lynch the KKK’ graphic designed by Natas Kaupas and Kevin Ancell, and classic Jeff Klindt graphics such as the James Kelch ‘James’ board, which was recently re-released, Real’s aesthetic has always been instantly recognisable.

The logos you grow up with always mean more to you than the ones that came before or after. I'm not even going to suggest that I can be unbiased about something that means so much to me; but I also like to think that as a skater who has worked within the industry as an artist and a skate rat that grew up in the Midwest, I can separate my love of the activity from my personal feelings about the industry and companies. These are important logos for many reasons. Some are more powerful and meaningful than others but what I'm addressing are icons that have come to represent skateboarding in a lot of ways... succinctly and graphically.
A skateboard consists of a deck, trucks, wheels, bearings, hardware, and griptape. All parts come in a variety of sizes, graphics, colors, and signature pro series. The deck is the essential part of any skateboard. The deck ranges generally from 7.5" to 8.5". Skaters choose their board size for many reasons, but the basic deciding factor comes down to style of skating and foot size. Transition skaters usually ride a wider deck, while street skaters tend to go with a smaller deck. Skate brands such as Girl, enjoi, and Welcome offer a wide range of boards in regards to sizes and graphics. Skateboard trucks come in either a high or low setting, and also in a range of widths. The main factors in a truck, are how well they turn, and how well they grind. Independent, Venture, and Thunder, are truck brands that are well known for their turning and grinding capabilities. The skate hardware is generally either Phillips head or Allen key bolts. The skateboard wheels range from 50mm to 60mm. Some brands offer smaller and larger sizes, but 50-60mm is the general range. Like the deck sizes, wheel sizes depend on the skater's choice of terrain: Transition skaters tend to ride bigger wheels, while street skaters usually go with smaller wheels. Bones, Spitfire, Ricta, and Wayward wheel companies all make wheels for any terrain, whether you're a street shredder or a park burner. Skate bearings follow the ABEC rating system, which includes grades 1, 3, 5, 7, and 9. Bones, Bronson, and Andale are some of the top bearing brands in the skate market. CCS proudly carries all these brands, and many more.
The Golden Dragon is a fantastic board for beginners, and it’s all in the wheels. The high-rebound polyurethane wheels are hand-cast and offer amazing grip as you ride, plus fantastic roll. The deck itself is just slightly longer than a standard skateboard, which offers a bit more stability for beginners, who might be worried about sliding or slipping off a shorter board. Additionally, this board features the All Powell-Peralta Ligament strap, an important safety feature that keeps the deck together if it should break. This helps prevent injury and provides a little more peace of mind for the rider.
×