The best criticism you could make about skateboarding in general right now is that it takes itself too seriously. Rightfully so. Skateboarders are often under attack, and what they do is illegal in most places. Skate culture is constantly being ripped off and bastardized. That's why it's so important to have a healthy sense of humor about it all, and that's why it's important that skateboarding has Roger.
Since Fine Artists Vol 1, Element have released numerous videos including Element – Third Eye View (1998), Element – Rise Up (2005) which focused on the brand’s European team, and more recently, the short video Element – Rise and Shine (2011) focusing on Element team rider Nyjah Huston. Element’s video output is unparalleled with releases from all over the globe – most of which can be found via the link above..
A “razor tail” is the term for when the tail of the skateboard deck becomes sharpened and worn due regular use and scraping the tail of your skateboard on the ground to stop.  When your deck gets razor tail, its becomes a weapon against you and anyone need you while you’re skating as being hit with a sharpened tail is very painful.  To avoid this from happening, you could buy a carbon fiber deck that may be more resistant to wear, but more importantly you should not scrape your tail to stop.  Instead you can lightly place one foot or toe down to slow your speed or powerslide to a stop.
Skateboarding damages urban terrain features such as curbs, benches, and ledges when skateboarders perform "grinds" and other tricks on these surfaces.[112] Private industry has responded to this problem by using skate deterrent devices, such as the Skatestopper, in efforts to prevent further damage and to reduce skateboarding on these surfaces.[112]
There’s no way have never seen a Palace logo at this point, and if you haven’t that’s cause you shleep, bruh. Palace is one of the best out there doing the whole “high fashion or skate brand?” thing, and they hold a unique place on this list for being one of the few brands not based and started in the U.S. The Palace Wayward Boys Choir, like many before them, turned their group of friends into a successful crew of respected pros, who you will never see on Fox Sports 1 skating in a multi-million dollar contest.
Omar Salazar suffered a bad knee injury recently and was sidelined from skating, allowing him to refocus his energy into running his company, Doomsayers. Following the demise of Alien Workshop and facing an uncertain future in the industry, Omar decided to really focus on a brand whose image is not shy about its disdain for corporate greed, which many people blame for the demise of his long time sponsor.
A Maplewood board embellished with polyurethane coating can hardly describe the liveliness of the game combined with the names of professional skateboarding brands. Considering, skating as mere sports equipment can divulge you into a wrong dimension. We believe whether you choose among the professional and impulsive skateboard shoe brands or best skateboard decks brands, commitment towards the sport can make you rule the ambience.
Modern decks are made with a composite of thin layers of either maple or bamboo pressed into a near symmetrical shape with a nose equal to or longer than the tail. The deck should be concave (subtle U shape) along the whole board with both the nose and tail angled upwards (the "kick" of the board). Conceptually while the skateboard is a platform, it also serves to cup the balls of the skater’s feet with rising sides, nose and tail providing the foundation for pretty much all modern skateboard tricks.
SkateXS makes skateboards for kids, but the quality of the product is just as high as skateboards for adults. Many parents report their children being incredibly satisfied with the product. The reviews are 90% positive, and it’s easy to see why so many family members and friends turn to buying this skateboard for their young ones. Read on for more to consider when buying a skateboard for beginners.
Well know for their creative cartoon graphics and high-quality deck construction, this Toy Machine complete is another great starting skateboard for beginners.  This deck is slightly larger than 8″ so it would be perfect for adults or people with larger feet who want a more stable ride.  This setup is another good example of generic parts with a pro quality deck for a very reasonable price.  A great option for a beginner who loves the logo and graphic, but wants to save money on the less important parts until they decide they want to take their skating the to next level.
A 100% genuine Penny board. It is a complete skateboard featuring classic design. Its design reference comes from 1970s boards. It replicates the retro era skateboard. Its small size makes it an ideal cruiser providing you with ease of using it anywhere. Whether commuting to your school or surfing along with friends, Penny Complete Skateboard provides a smooth ride. It is lightweight and easy to carry around as well. It can easily bear heavy weight and will not give in. You can easily master your skateboarding skills and become a pro using genuine Penny Australia Classic Complete Skateboard.
This is an interesting option because it is basically a hybrid between a blank and pro skateboard deck.  It’s like a pro board in that is has a “brand” and logo, but the cost is similar to blanks and they don’t sponsor the same quantity and caliber of professional skaters that other pro brands do.  While the logo is really cool and the rest of the parts seem to be high quality, you may not get the same brand recognition with Punisher as you would with other brands like Element or Toy Machine.  This deck is also 7.5″ which makes it a great choice for a younger beginner.  This is the perfect beginner skateboard for someone who doesn’t really care about the brand name, but still wants the style and performance of an above average professional skateboard.
As the name implies, a complete skateboard contains all the parts listed above, but in an already assembled ready-to-ride skateboard.  The advantage to buying a complete is it completely eliminates the research and guesswork of buying each product individually and ensures that the skateboard is assembled correctly and safely.  This is the approach I used when buying a skateboard for my nephew and what I recommend for people buying a skateboard as a gift or as their very first skateboard for themselves.
George Powell continued in business as the Powell Corporation and the brand released numerous videos throughout the 90’s and 00’s, including titles such as Suburban Diners (1994), Scenic Drive (1995) and FUN (2009), whilst simultaneously kick starting the careers of many skaters who went on to become household names such as Chris Senn, Adam McNatt and the UK’s own Danny Wainwright, along with stalwart Bones Brigade member Steve Caballero who stayed with the Powell brand throughout.

Top Skateboards come from companies such as Blind Skateboards. Professional skateboarder Mark Gonzales founded the brand and it was launched in 1989. Today, products are distributed by Dwindle Distribution. The brand is intended for serious, hardcore skateboarders. It has an emphasis and an appreciation for the graphics used for its decks. In the early 1990s, Blind Skateboards set itself apart from other skateboard brands by creating videos. Their first, directed by Spike Jonze, appeared in 1991. You can get completes at Blind that includes the decks, wheels, trucks, and bearings. The Blind Team is professional skateboarders Cody McEntire, TJ Rogers, Kevin Romar, Sewa Kroetkov, Morgan Smith, Sam Beckett, Micky Papa, Yuto Horigome, and Jason Thurtle.

While the skate shoes design afforded better connection and traction with the deck, skaterboarders themselves could often be identified when wearing the shoes, with Tony Hawk once saying, "If you were wearing Vans shoes in 86, you were a skateboarder"[27] Because of its connection with skateboarding, Vans financed the legendary skateboarding documentary Dogtown and Z-Boys and was the first sneaker company to endorse a professional skateboarder Stacy Peralta. Vans has a long history of being a major sponsor of many of skateboarding's competitions and events throughout skateboarding's history as well, including the Vans Warped Tour and the Vans Triple Crown Series.[8][81][82][83][84][85]


Bearings are standardized to fit in all kinds of skateboard wheels. All bearings will eventually get dirt and gunk in them which slows you down. Regular cleaning is recommended. Higher quality bearings will perform better, roll faster, retain more speed, and last longer when cleaned regularly. Some bearings come with bearing spacers or have spacers built into the bearing. These will fit in any wheel, but are not necessary for most types of skateboarding or longboarding.
Top 8 Best Skateboards For Beginners, ProQuick Comparison Of Some Good Choices Short Skateboard Reviews On The Best Skateboards For Beginners, Pro:#1. Powell Golden Dragon Flying Dragon Complete Skateboard #2. PUENTE Pro Cruiser Complete Skateboard 31 Inch #3. Ohderii Skate Skateboards 31" X 8" Skateboard Cruiser Through Downhill Canadian Maple 7 layers #4. MINORITY 32inch Maple skateboard #5. POSITIV Team Complete Skateboards #6. SCSK8 Pro Skateboard / Crusier Pre-Assembled Complete #7. KPC Pro Skateboard Complete #8. Ancheer 31" Pro Skateboard Complete  OUR TOP CHOICE Points to Consider when Buying Your Best Skateboard: Good Wood Aluminum Trucks Urethane Wheels Bearings Advantages of Riding a Good Skateboard:
Remember, no skateboard lasts forever. Each board has different lifespan, regardless of the brand. Flip tends to break the easiest if you skate a lot. Almost and Girl boards usually have the longest life span. If you want a board that lasts really longer and you have the money, go for the Uber boards. Almost has three Uber boards signed by Mullen and usually start at $70 just for the deck, and completes range from $150-$250 just for the basic. If you want the perfect board, then you are talking a lot of money.
We would also like to point out one amazing detail about Plan B that makes it stand out from the other top skateboard brands, the deck technology that it uses. I already talked about how their decks are pretty strong and have minimal flex. But its other products like Plan B BLK ICE decks with wax used on their standard build decks to increase the speed and smoothness of skating a rail and the Flashback Series that uses prospect skateboard deck technology to make the boards thinner, lighter and stronger, are amazing!
Unlike some deck options, which are completely bare, the Bamboo Skateboards Galaxy Series Cosmic Cloud Skateboard Deck features heat-stamped artwork on the underside of the board, including several geometric and interstellar designs, including a beautiful nebula. Bamboo Skateboards claims these boards last their customers three weeks longer than other decks. They come in three sizes: 7.75-by-31.5-inches, 8-by-31.75-inches, and 8.25-by-32-inches.
Using 12 years of experience in manufacturing skateboards, Penny Skateboards was created to offer the skateboarding community high performance and high quality plastic skateboards. The brand focuses on creating each Penny skateboard with attention to detail and with the best raw materials. Not only are they meant to look good, but are meant to work just as good if not better.
Individuality and a self-expressed casual style have always been cultural values for skateboarders, as uniforms and jerseys are not typically worn.[88] This type of personal style for skateboarders is often reflected in the graphical designs illustrated on the bottom of the deck of skateboards, since its initial conception in the mid seventies, when Wes Humpston and Jim Muri first began doing design work for Dogtown Skateboards out of their garage by hand, creating the very first iconic skateboard-deck art with the design of the "Dogtown Cross".[89][90][91]

i would recommend a deck size of 8.0 to 8.25 as for brand baker,girl,chocolate deathwish, its all preference the main difference between brands is the shape of the nose and tail. As for trucks i would go with independents or thunders. thunder have a quicker and more responsive turn while independents have a more delayed smooth turn. also thunders tend to wear away faster while independents don't. As for wheels go with 52mm or 54mm either spitefire formula fours of bones stf.

500AlmostAluminatiAnti HeroArborBambooBirdhouseBlindBonzingCometCreatureDarkstarDB LongboardsDogtownDusters CaliforniaElementEnjoiEverseshFlipFocusFoundationGlobeGoldCoastGravityHabitatJartKebbekKrookedLandyachtzLaybackLushMadridMakahaMoonshine MFGOmenPennyPlan BPowell PeraltaPrism SkatePunkedRayneRealRememberRivieraRoad RiderSan ClementeSanta CruzSector 9Suicidal SkatesToy MachineWarehouseZ-FlexZero

The wheels of your skateboard can greatly affect your ride in numerous ways, such as the speed, your ability to take control of the skateboard’s movements, and what you feel while riding the board. The good news is that they come in various sizes, levels of durability, and colors, allowing you to pick one that suits your skateboard preference and style.
Graphically speaking, Welcome is very distinctive, with an emphasis on hand drawn imagery and references to esoteric and occult themes mixed with bright colourways. Welcome Skateboards also offer a detailed shape guide on their website, detailing the exact dimensions of all of their 38 custom shapes, which again differentiates their product from many of the skateboard brands on the market.
“As far as the actual look of the vast majority of contemporary graphics goes, I’d say that it feels to me as if something has been lost. It’s down to what you can do with modern heat transfer printing techniques – you can literally just take a photograph from the Internet and print it identically straight onto a skateboard. Speaking personally, there’s very little to challenge you there: either from the point of view of creating graphics, or from the consumer’s perspective. Whereas back when screen-printing was the norm, every time a graphic was produced the artist was physically cutting the key line out by hand. The key line is the final black line that forms the outline of whatever it is that you’re printing and ties in all the other colours together. You can see this in the early Sean Cliver graphics for example, where it’s clear that he has hand cut the key lines as precisely as he was able to, but looked at from today’s perspective they’re not perfectly precise, which is what gives Cliver’s earliest stuff its specific look in my opinion.”
The skateboarding industry has changed so much in the last few years. Female skaters now get the support they need from bigger companies. I know hoopla helped pave the way for this to happen. It was so rewarding and surreal to have had such a rad team of girls represent hoopla over the years. I am stoked to have formed friendships with such a diverse and talented group.
The first skateboards started with wooden boxes, or boards, with roller skate wheels attached to the bottom. Crate scooters preceded skateboards, having a wooden crate attached to the nose (front of the board), which formed rudimentary handlebars.[6][7][8] The boxes turned into planks, similar to the skateboard decks of today.[9] An American WAC, Betty Magnuson, reported seeing French children in the Montmartre section of Paris riding on boards with roller skate wheels attached to them in late 1944.[10]

This board also has a unique shape that makes it a lot easier to ease into turns, which is something that longboards aren’t always known for. It’s a lot easier to push off on this deck thanks to how low it sits, and you also get a one-year warranty from the manufacturer should anything go wrong. If you’ve never ridden on a board before, and don’t want to learn tricks right away, this is a great choice, especially if you’ll be riding around a lot of mostly flat areas.


Decks come in a variety of shapes and sizes. You can choose a mini-board, a cruiser, a drop-through, or a standard deck for your favorite set of wheels and hardware. Widths range too from a few inches with a 22-inch board to the wide size of a true cruiser. Some decks are flat as possible while others are significantly concave for optimized turning. You can buy a deck with artwork and grip tape already attached for a quick install or you can get a bare-bones wooden deck to truly customize.
Rarely you make notice your deck to lose concavity or flatten over time.  Although this isn’t very common, it’s typically due to water damage and is a sign of many other problems.  Wooden decks are not meant to get wet and they will warp, crack, and break if they get soaked.  It’s pretty simple and straightforward  to avoid this problem.  Keep your skateboard in a dry place, and don’t skate in the rain or through puddles.  Skating through water will also destroy your bearings, if deck warping and breaking wasn’t a good enough reason for you to not do it.
James Haden is one of the owners of the Skateboarder community, together with Nash Gibson – his co-owner. He works as a full-time copywriter for a private company and also a true adventurer. He is an avid reader, writer, traveler, and extreme sports junkie. During his free time, he researches interesting content for their blog and continuously writes for their audience.
The brand based in Vancouver provides skateboards featured with construction of fiberglass and bamboo, Rayne longboards assure the best skating experience you can imagine. Decks made by Rayne has the ultimate crispy flow produced from the highest quality bamboo. The boards come with unique designs that standing out with the cool personality that beats other competitors in the market.

WKND turned a successful web series on the popular skateboarding site The Berrics into a company that is truly nothing but homies having fun and making videos they think are funny. Some people might dismiss them as another flash in the pan brand started by a crew of guys with some extra cash, but those same people have probably never watched American WKND and realized these guys are no fluke.


After riding Powell decks for many years, I was given the opportunity by Michael Furukawa at Skate One Corp. to create my own board brand. This was an honor but I needed a co-pilot for this mission to happen. I asked Mimi Knoop if she would join forces with me and this was the beginning of an all girls skate brand that we called hoopla skateboards.
If you are looking to buy a reliable skateboard that will keep you busy for years to come, the Whitey Panda is the ideal choice. It’s a very good entry-level skateboard that can be put through a lot of wear and tear. The solid, metal skateboard trucks ensure that you will be kept sturdy and safe both on and off the ground. This helps the rider feels more confident when doing tricks, no matter where they are.
Remember the cool skate kids wearing Workshop tees in the '90s? Well you don't see too many of those these days, but AW is still one of the best “big” skate brands going. The team alone—featuring Supreme muse Jason Dill, tech-gnar wizard Anthony Van Engelen, and the most handsome guy on a board, Dylan Rieder—puts the brand in the top 10. And even though you might not associate legacy riders like Rob Dyrdek with anything cool at all, he pulled one of the most boss moves in all skate business history when he bought the brand that first sponsored him 20 years ago back from Burton (who bought the brand from Chris Carter in 2008) last year, so Workshop is once again skater-owned.
For those of you who don't know, Mark Gonzales isn't just an artist who occasionally pens logos for Supreme. He's a bonafide legend, as an artist, a skater, and a personality. His brand Krooked is a perfect expression of that, with art direction from the man himself, and a videography of skate flicks that includes essential viewing Gnar Gnar, Kronichles, and Naughty. Supreme may top Krooked on this list, but true Gonz stans will always represent with Krooked.
Diamond has been a household name in streetwear for their dope caps, tees, hoodies, and sneaker collab hype that have had the Internet going nuts for years, but the brand's roots are in skate. While the list of collaborations and rapper co-signs is long (too long to list here), but for skate nerds the team is way more impressive—Raven Tershy, Ryan Sheckler, Torey Pudwill, Shane O'Neil, Stevie Williams, Paul Rodriguez… The list goes on.
Finally, consider the type of grip tape you'll want on the board. While function is important in this regard to give your feet ample support, there's nothing wrong with adding some bling to the board's surface either. Many skateboard retailers will offer you several choices of grip tape and board styles, so it's definitely important to ask a lot of questions.
Jessup is considered to be the standard grip tape, and it is the grip we offer for free with all decks. MOB is known for their coarser grip, which gives excellent traction, but also wears down your shoes faster. MOB M-80, Grizzly and Shake Junt grip tapes fall somewhere in the middle, offering good overall traction without the heavy abrasion. There are other extra course grip options for downhill skateboarding (Vicious, Blood Orange, etc.). That stuff locks your foot in place but it is so coarse it would quickly destroy your shoes if you tried flip tricks with it.
Mini Cruisers have exploded in popularity in recent years. These short and skinny boards may not have the versatility of a standard skateboard, allowing for a full range of tricks and travel, but they are ideal for urban and college living where space for storage and riding are both minimal. If you want to ride a mini-cruiser, but you hate the plastic decks or you want to build your own, check out the Bamboo Skateboard mini cruiser deck.
So now that you have an idea of what size and shape board you like, it’s time to choose a brand. A popular size is an 8.5 skateboard deck. If you were looking for a size 8.5 skateboard deck, you could narrow the decks offered on CCS.com to fit in the 8.25 - 8.5 range. This will show you all the boards in that range, and significantly reduce the boards you have to look through. Now, if you don’t have a preference on board brands, find a graphic you like and you’re all set. If this is your first skateboard or are still learning about what wood and brands you prefer, we recommend checking out a CCS Skateboard. They give you a bang for your buck, that's for sure.
You should also look for the type of skateboard wheels that you will be getting with your skateboard. Soft wheels are great for cruising around uneven surfaces, while harder wheels are better for skateboard tricks and hard falls, which is vital for various skateboarding styles. The key thing to remember is the smaller wheels are slower, and bigger wheels are faster.
Skateboarding is one of the most popular alternative sports around the world, for kids and adults alike. But before you hop on a board and take off, it’s important to choose the right kind of board for you. Most beginners will simply grab the board that they like the looks of, and with the endless array of deck art and styles that exist, that kind of attitude can lead to choosing a board that isn’t right to learn on.
SkateXS has been widely known to be the best brand for kids that are looking to advance their skateboarding skills. These skateboards have been designed with children in mind. That’s why there are many customizable features that you can pick when purchasing this product. If you are an avid skateboarder and want to introduce your kids to skateboarding, or just a parent that has been hearing about skateboards for weeks now, you can safely pick this product by SkateXs to help your kids safely advance in their skateboarding skills.
Severe injuries are relatively rare.[103] Commonly, a skateboarder who falls suffers from scrapes, cuts, bruises, and sprains.[103] Among injuries reported to a hospital, about half involve broken bones, usually the long bones in the leg or arm.[102] One-third of skateboarders with reported injuries are very new to the sport, having started skating within one week of the injury.[102] Although less common, involving 3.5–9 percent of reported injuries, traumatic head injuries and death are possible severe outcomes.[102]

The skateboards on this list will all suit one type of person or another, but they all have drawbacks that keep them from being true pro boards. The best skateboards is the one that requires the fewest upgrades to be great. Replacing skateboard parts is just part of the game, as street skating is destructive by its very nature, but it should take a while.

The core of the skateboard trucks is extremely lightweight, compared to the other skateboards we listed. They still sport a heavy-duty aluminum, but their initial design helps the skateboard be lighter and easier to pivot. It also arrives un-assembled which allows for the adult or child to have a sense of accomplishment when they put the board together. You will also be able to customize it to your heart’s content!


As it eventually became more apparent that skateboarding had a particular identity with a style of shoe, other brands of shoe companies began to specifically design skate shoes for functionality and style to further enhance the experience and culture of skateboarding including such brands as; Converse, Nike, DC Shoes, Globe, Adidas, Zoo York and World Industries. Many professional skateboarders are designed a pro-model skate shoe, with their name on it, once they have received a skateboarding sponsorship after becoming notable skateboarders. Some shoe companies involved with skateboarding, like Sole Technology, an American footwear company that makes the Etnies skate shoe brand, further distinguish themselves in the market by collaborating with local cities to open public Skateparks, such as the etnies skatepark in Lake Forest, California.[83][83][84][86][87]
These are commonly found at walmart. Price is usually around $50, which is the price for a good set of longboard wheels. If you want a good longboard and you are on a budget, search for a bargain of a name brand on craigslist or other similar sites. Sometimes you find a jem forn cheap. I recommend buying a reasonably priced name brand such as flippin board co, landyachtz, or loaded . Hope this helps :—)
It’s long deck and premium bearings will give you the ease of pushing which will help you to tear out of around- town traveling. It has a unique shape of the perimeter which offers you 9.6 inches of leverage per turn. Can you imagine it? It also helps you to eliminate the wheel bite. This board has a maple covered deck that will certainly catch the attention of others. It is almost impossible that you cease to enjoy the splendor and elegance of this board. Furthermore, along with your stylish longboard, 245 mm axles are incorporated.
As the name implies, pro skateboard decks are decks made by well-known skateboard brands that typically feature graphics or logos related to a specific team rider.  Usually, pro decks are more expensive than team decks of the brand and much more expensive than blank decks.  The increased cost goes to the pro skater and it’s a way for the buyer to support their favorite skaters and brands.  Pro street decks are almost always Canadian maple, besides a few carbon fiber exceptions and they are the most commonly purchased decks see in skateparks and on the streets worldwide.
As the name implies, a complete skateboard contains all the parts listed above, but in an already assembled ready-to-ride skateboard.  The advantage to buying a complete is it completely eliminates the research and guesswork of buying each product individually and ensures that the skateboard is assembled correctly and safely.  This is the approach I used when buying a skateboard for my nephew and what I recommend for people buying a skateboard as a gift or as their very first skateboard for themselves.
Unfortunately, there is no one skateboard that is ideal for beginners, and choosing Skateboards for them can be difficult. Learners come in different sizes, weights and heights, and that’s why it can be difficult to generalize. It also depends on what you want to do with your skateboard as a beginner, and whether you will be using it for cruising, tricks or both. Regardless, there are a few guidelines that can help you decide which beginner skateboard is perfect for you, all of which we listed above and below!
Freedom Plaza has become a popular location for skateboarding, although the activity is illegal and has resulted in police actions.[5][115] A 2016 National Park Service management plan for the Historic Site states that skateboarding has damaged stonework, sculptures, walls, benches, steps, and other surfaces in some areas of the Plaza.[5] The management plan further states that skateboarding presents a persistent law enforcement and management challenge, as popular websites advertise the Plaza's attractiveness for the activity.[5] The plan notes that vandals have removed "No Skateboarding" signs and recommends the replacement of those signs.[5]
Quality wheels won’t mean much if you don’t have nice bearings which allow the wheels to spin freely on the axle of the skateboard truck. A quality set of bearings will spin well right away and actually get even better once broken in a bit. If quality bearings get dirty, they can typically be taken apart and cleaned relatively easily. A good set of bearings typically runs between $10 - $16.
New in the top 16 ranking, but still an old stager in the business. In 2016 you gladly put Anti Hero decks under your feet, which is not surprising regarding the neat designs and the high quality of the boards. The brand stands for 100% skateboarding without high life and frills. It’s all about ripping it. Get your Anti Hero deck at skatedeluxe from 52.99 € | 45.00 GBP!

Krown Rookie complete skateboards are a prime example of a product that is well liked, and of great quality. Just like with the previous Krown product we discussed, the company has given us several colors of the product o choose from. This is a great addition, since it helps riders personalize their rides whichever way they want. It also limits the possibility of running into someone that is sporting the same skateboard at you!

By the 1960s a small number of surfing manufacturers in Southern California such as Jack's, Kips', Hobie, Bing's and Makaha started building skateboards that resembled small surfboards, and assembled teams to promote their products. One of the earliest Skateboard exhibitions was sponsored by Makaha's founder, Larry Stevenson, in 1963 and held at the Pier Avenue Junior High School in Hermosa Beach, California.[12][13][14] Some of these same teams of skateboarders were also featured on a television show called "Surf's Up" in 1964, hosted by Stan Richards, that helped promote skateboarding as something new and fun to do.[15]
No longer number one but still quite close: EMillion SkateboArts land on the second place this year, which is more than respectable regarding the competition. The Bavarian brand stands for quality, artistic designs and a motivated team, which is also represented by skatedeluxe team rider Ben Dillinger. EMillion decks are available from 49.99 € | 40.00 GBP!
Skateboard Cafe’s video releases to date include the initial Skateboard Cafe Promo (2012) featuring the original team of Harry Ogilvie, Shaun Currie, Josh Arnott, Tom Gibbs, Louis Marshall and Pat Garrahy plus associated friends. This was followed by Skateboard Cafe’s first full-length video ‘Alfresco‘ in 2015, followed by a rash of single rider and tour-based video releases since. Skateboard Cafe are also notable for conducting every aspect of their business in-house with all video, design and product sourcing undertaken by the owners, as well as using video look-books to promote each new drop of Skateboard Cafe product.
×