FTC has grown from being the staple skate shop of the Bay Area to being a respected brand pushing skateboarding across the globe. Their SF flagship sits in the famous Haight Ashburry district, always attracting visitors and giving them a look into what skateboarding is really like in this day and age. FTC will have you covered in their own gear, and will also always be pushing the next big thing in their shops, and they never make a bad call.
Based out of Huntington Beach, California, Good Skateboards is a grassroots inspired skate brand specializing in quality boards. Skateboarding isn’t about what you do, but how you do it. That’s Good Skateboard’s mission and they’re sticking to it! The brand is committed to supplying the skating industry with positive vibes and exceptional products that make you appreciate skateboarding all over again. Good Skateboards decks are constructed from 100% Canadian maple and made in the USA. Their decks are classic in board style and feature fun artwork from artist Vincenzo Colonna. In addition to decks, they also offer branded tees and accessories featuring their iconic “Ok” hand gesture logo. Good Skateboards t-shirts have similar graphics to what you see on their decks. You’ll see the same artwork on their stickers too!
Krux make some great trucks. Krux makes "downlows" trucks, that have a lower hanger and kingpin than even Grind King. However, you will need a hex tool to adjust them. The Krux IIIs with Topless System are even lighter, with special bushings that feel broken in from the start, but that also provide a faster snap back into position. Krux trucks are light and low.
If you want to do cruising and street style on the same board then you probably want a large board and larger wheels, as many have already commented. I think that an 8 inch board with at least 56 mm wheels will be best. I think that you should find a local shop to support and to talk to about gear. I would advise getting a shop deck, with Independent trucks (at the correct width for your board, which is one detail that a local shop should be able to help with) Bones street tech formula wheels (I like profiles 1 and, I think 5), and Bones Reds bearings (not super reds, super reds are not super).
Make no mistake, not all European skate brands are provincial microcosms. Cliché has one of the most stacked teams in the industry, including the Australian master of pop Andrew Brophy and manual wizard Joey Brezinski. But the real star of the squad is Frenchman Lucas Puig, who has a stellar signature shoe for adidas, and an upcoming line of caps called Hélas that you will undoubtedly be hearing more about in the near future. Team aside, thanks to strong art direction, a prolific video program, and a highly covetable product offering that includes a dope collab with NYC mainstay DQM, Cliché is très ill.
A “razor tail” is the term for when the tail of the skateboard deck becomes sharpened and worn due regular use and scraping the tail of your skateboard on the ground to stop. When your deck gets razor tail, its becomes a weapon against you and anyone need you while you’re skating as being hit with a sharpened tail is very painful. To avoid this from happening, you could buy a carbon fiber deck that may be more resistant to wear, but more importantly you should not scrape your tail to stop. Instead you can lightly place one foot or toe down to slow your speed or powerslide to a stop.
This is an interesting option because it is basically a hybrid between a blank and pro skateboard deck. It’s like a pro board in that is has a “brand” and logo, but the cost is similar to blanks and they don’t sponsor the same quantity and caliber of professional skaters that other pro brands do. While the logo is really cool and the rest of the parts seem to be high quality, you may not get the same brand recognition with Punisher as you would with other brands like Element or Toy Machine. This deck is also 7.5″ which makes it a great choice for a younger beginner. This is the perfect beginner skateboard for someone who doesn’t really care about the brand name, but still wants the style and performance of an above average professional skateboard.
As the name implies, a complete skateboard contains all the parts listed above, but in an already assembled ready-to-ride skateboard. The advantage to buying a complete is it completely eliminates the research and guesswork of buying each product individually and ensures that the skateboard is assembled correctly and safely. This is the approach I used when buying a skateboard for my nephew and what I recommend for people buying a skateboard as a gift or as their very first skateboard for themselves.
“I think it’s just also like, people want to have fun. If you watch say those types of Street League type of skateboarders, who are super amazing skateboarders that can push these crazy tricks down rails and stairs, like switch tre down fifteen stairs or whatever trick they do — it’s amazing to see that level of skating, but if you are an average Joe living in a small town you’re just like, “I’m never going to be able to kickflip back noseblunt twenty-stair rails”. That’s always the biggest trick. If you ask me it’s like, “What videos do you really enjoy?” The videos that you can some how relate to. Like, “Hey, I could actually do some of these tricks.” You connect to it and you feel like you can picture yourself being a part of the whole thing. When people put out these amazing super stunt skateboarding videos, pushing it to the furthest level possible, that’s rad in one sense, but to me personally as a kid I could never in my wildest dreams believe that I could do that too. I respect it. I understand it. But does it make me want to go skate? No.”
Its All Powell-Peralta Ligament decks feature a wider and more robust polymeric strap. The ligament strap is so powerful that in case your board breaks, the ligament strap will hold your deck together to allow you to ride out of it. Ligament decks are same in weight as a 7-ply maple deck but provide more pop and stiffness that lasts longer than ordinary boards.
From cheap skateboards to high end, custom complete skateboard decks, we have boards for riders of every skill level and tax bracket - we get it, we put skateboarding before everything else first. If you can’t always afford a new board, but go through decks like toilet paper, consider a CCS Skateboard - they cost less, but are manufactured in the same factories as other brands we carry. CCS Skateboards are held to the same standards as every skateboard we sell, but we can sell them for less.
The core of the skateboard trucks is extremely lightweight, compared to the other skateboards we listed. They still sport a heavy-duty aluminum, but their initial design helps the skateboard be lighter and easier to pivot. It also arrives un-assembled which allows for the adult or child to have a sense of accomplishment when they put the board together. You will also be able to customize it to your heart’s content!
Efforts have been taken to improve recognition of the cultural heritage as well as the positive effects of encouraging skateboarding within designated spaces. In 2015, the John F. Kennedy Center for the Performing Arts in Washington, D.C., hosted an event at which skateboarders accompanied by music did tricks on a ramp constructed for a festival of American culture. The event was the climax of a ten-day project that transformed a federal institution formerly off-limits to the skateboarding community into a platform for that community to show its relevance through shared cultural action in a cultural common space.
You can get a lot of advice (and maybe too many opinions) from fellow skaters. Some of it might not be as informed or educated as a shop owner's (and some might be flat-out bad advice), but it should at least be sincere! If you don't have a local skate park, or are too uncomfortable to walk up to people and ask, you can also ask around on a skateboarding forum. People there will be more than happy to tell you what they think about deck brands.
What started off as a crew of Montreal skaters filming full videos featured on SLAP magazine has suddenly turned into one of the highest quality and apparel brands in skating today. When Virgil Abloh drops by to your pop-up shop and your skate contest, you must be doing something right. Coming fresh off a recent collaboration with Vans, Dime seems to be keeping the clean silhouettes and instant classics on deck.
Their fan base loves them for pushing goofy but fun looking skating that in reality is heavier and rawer than most will realize, and their board graphics and t-shirts feature art from their riders in striking colorways. Their product immediately stands out among the bunch at any shop it’s stocked. These guys are doing things exactly their way, and it’s sticking.
The DreadXBoards Concave Skateboard has Plastic Deck Injection Molded for excellent durability. It features Urethane Wheels 59mm 78a, aluminum trucks, and Abec 7 Bearings. It is completely assembled and is ready to ride. It is perfect for beginners or experienced riders. It can load up to 185 lbs. It is great for kids and adults. It has an excellent rating of 4 on Amazon.
Started by a group of guys who decided to stick together after the fall of Alien Workshop, Quasi skateboards presses boards and prints shirts featuring psychedelic art for the year 2015, offering something different than most board brands today. Backed by a team boasting hometown heroes and certified style gawds, Quasi is a board company everybody wanted that nobody had made yet.
FTC was cool before there were skate and hype blogs around to tell you that they were cool. Mastermind Kent Uyehara built his brand from the back of a sporting goods shop into an international symbol of cool, with franchise locations in Sacramento, Tokyo, and Barcelona. FTC isn't just the go-to spot for skate gear in those cities-it's a full-blown brand that any skater would be proud to wear.
It’s best to not go overboard with spending a lot of cash on your first skateboard. After all, it will take a lot of beating, and will surely be reduced to looking like a scratched plank of wood! Best skateboards to learn on include budget, beginner skateboards that offer you all the quality features a more expensive skateboard would, but at a lower expense. If you are new to skateboarding, it’s also recommended to get a skateboard with smaller wheels, since they go slower and are less intimidating!
Destructo has some fancy skateboarding trucks. The Destructo raw series skate trucks come in low, medium and high designs and look oddly skinny. The Limited and Pro series trucks just look awesome, with simple pro signatures on the front and great color schemes. That's not to mention Destructo's "Rail Killer" series - these light trucks have extended baseplates to reduce wheelbite, and come in some incredible color schemes (including one using 24 karat gold!).
This board also has a unique shape that makes it a lot easier to ease into turns, which is something that longboards aren’t always known for. It’s a lot easier to push off on this deck thanks to how low it sits, and you also get a one-year warranty from the manufacturer should anything go wrong. If you’ve never ridden on a board before, and don’t want to learn tricks right away, this is a great choice, especially if you’ll be riding around a lot of mostly flat areas.
After leaving long time sponsor Birdhouse due to a feeling of dissatisfaction at the manner in which he himself was being marketed as a pro skater, Andrew Reynolds joined forces with a group of similarly aged pro skaters, who at the time, all lived close to each other in Huntington Beach, California in the Warner Ave housing complex and resolved to turn what had formerly been a loosely affiliated crew into a skateboard brand. Reynolds approached Tony Hawk and Per Welinder, owners of Blitz Distribution (and distributors of Birdhouse) with his idea and, rather than losing Reynolds completely, Blitz Distribution agreed to assist Reynolds with Baker and to distribute it.