If you didn’t already know, the “nose” of a skateboard is typically the front and the “tail” is the back.  When you fall or slip and your board slams into curbs, fences, or other hard objects, it’s common for the wooden ends to chip or become damaged upon impact.  Over time these chips can make it harder to preform tricks and even just cruise around.  These chips can be prevented by buying a carbon fiber or non-wood deck, or by there are some metal edges available that can be installed on the nose and tail.
Powell Peralta has gained increasing popularity in the 1980s, when skateboarding became an increasingly more sought-after action sports. Since then, they have been developing skateboards tailored to customers, taking reviews and critiques into consideration every time they were building a new model. The Powell Golden Dragon is a direct result of such careful consideration and tailored-modeling.
What the fuck is Bro Style? That's what a lot of skate nerds found themselves wondering at the end of 2012. Bro Style crept onto the scene with a goofy guerrilla-style internet marketing campaign that involved little more than the thumbs up logo. Little by little, product started to trickle out—beanies, snapbacks, pocket tees, socks, and other odd ephemera—and a few video clips. Bro Style is still something of a mystery, but one thing is clear, it's not meant to be taken too seriously. And that is seriously important for the skate industry to remember.

In the skateboarding world, there is considerable shuffling of the famous top brands as not many of them manage to stay in the spotlight for long. This continuous reshuffling paves way for new skateboard brands to come into the spotlight. However, it is important to note that no two brands are the same and comparing them is difficult but the following list has been created by extensive research of the saturated skateboard market and features the best skateboard brands out there that you must give a try. 


SkateXS has custom skateboards for kids of every young age. From ages 5-7 we have skateboards sizes 7” x 28”. For kids between the ages of 8-10 we have skateboards sized between 7.25” x 29”. These are the perfect sizes for young kids, since it helps them feel less overwhelmed by the board. It also helps provide them with a board that is ideal to their side, encouraging safe cruising and skateboard tricks.


Both your height and weight should play an important role when you are choosing a skateboard. You need to find a skateboard, which fits your weight and height. Picking one, which is either too small or too big might only cause you to experience difficulty controlling it, especially if you are still a beginner learning the ins and outs of skateboarding.
Let’s now move on to our top pick from the Punisher line, the Punisher Cherry Blossom Complete skateboard (31 inch). Hands down, the Punisher Cherry Blossom skateboard is the best skateboard for girls. And I am not just saying this because the cherry design would look best for girls, it has some incredible features and specifications. We love the 9-ply stiff maple deck with a beautiful cherry design. The deck is also covered with coarse grip tape which gives the skateboard excellent grip and it makes it a good ride for girls too.

The average width of decks available in skateboards is eight inches, however; there are many different varieties available as well. A wider deck provides you better balance as compared to slimmer kinds but it does not allow you to perform skateboard tricks. Decks come in a variety of materials that include wood, fiberglass or carbon. Considering the price, plastic decks come cheaper, but if we will consider quality then other options though more expensive will prove worthwhile.

Lewis Marnell became Almost’s first fully-fledged amateur, an addition announced in a bonus section of Almost’s ground-breaking mini ramp video ‘Almost Cheese and Crackers‘ from (2006) that focused upon Chris Haslam and Daewon Song’s pushing of the boundaries of mini ramp skating and has subsequently been credited with ushering in a new wave of technical transition skating in its wake.

Decks come in a variety of shapes and sizes. You can choose a mini-board, a cruiser, a drop-through, or a standard deck for your favorite set of wheels and hardware. Widths range too from a few inches with a 22-inch board to the wide size of a true cruiser. Some decks are flat as possible while others are significantly concave for optimized turning. You can buy a deck with artwork and grip tape already attached for a quick install or you can get a bare-bones wooden deck to truly customize.
Ever notice small vertical or horizontal cracks through your grip tape or by the hardware of your trucks?  These are called stress or pressure cracks and are basically mini fractures of your skateboard deck that typically are seen in the areas of the deck that withstand the greatest impact (around the trucks).  A few pressure cracks is generally no big deal and you won’t even notice them while skating, but they can compound and grow larger and make your deck lose “pop” and increase the chance of snapping.  To avoid pressure cracks, you cant use riser pads underneath your trucks to reduce the level of impact your deck takes.  You should also avoid over tightening your hardware and storing your skateboard in a very humid place as both of these practices can also make your board weaker and more susceptible to pressure cracks.
The concave of a skateboard deck is how curved the width of the deck is.  Very few skateboard decks have no concavity and are completely flat as then they would break very easily and be hard to do flip tricks on.  Steep concave decks are the most study and best to do flip tricks on because the slope of the deck catches the skater’s toe or heel more easily and flips the board faster than a shallower deck.  Shallow concave boards are better for cruising around and vert skating as they are more comfortable on your feet and more controllable.  In practice, these recommendations are pretty general and it ultimately comes down to personal preference on the the best deck concavity.  But if you have no idea, following the recommendations or picking a board with moderate concavity is a good place to start.
If you are eager to have a new skateboard and need to take into consideration your budget, then Landwalker’s skateboard is the prefect board for you, based on personal preference. It’s by far one of the cheapest products on this list, while still giving you sufficient endurance and quality performance. Thanks to the high-density wood, you can rest assured that even if you fall, your skateboard will remain to be in one piece. Preassembled completes are ready to take out onto the road.

Following stints on the US brands Mad Circle and Arcade and a pro model on the then hugely popular European brand Cliche skateboards, Pontus Alv quit his board sponsor and moved back to his hometown of Malmo, Sweden in the early to mid 00’s. During this time Pontus took what might be called a creative hiatus but which would be more accurately explained as a re-connection with his roots. After returning to Malmo, Alv became heavily involved in building and creating the scene there, working alongside friends to build a number of DIY skatespots through the city such as the now legendary Savanna-side and Steppeside projects.
Amazing! Great pop and amazing concave. Last for a long time as long as you don't get the bamboo board. They have an earthy style like element, but with a better board quality. The only reason they are not #1 is because they aren't as well known. You cannot snap these boards! I have skated them for a couple of years because they are so good. BUY ELEMENT BOARDS! You wont regret it.
Bearings are standardized to fit in all kinds of skateboard wheels. All bearings will eventually get dirt and gunk in them which slows you down. Regular cleaning is recommended. Higher quality bearings will perform better, roll faster, retain more speed, and last longer when cleaned regularly. Some bearings come with bearing spacers or have spacers built into the bearing. These will fit in any wheel, but are not necessary for most types of skateboarding or longboarding.

You’re just looking for a quality skateboard to buy for a beginner (either you or someone you know), but you have no idea where to start.  You see bearings, hardware, wheels, decks, and trucks being advertised but don’t want to spend hours researching which individual part to buy.  This is how I felt when I was first looking to but a complete skateboard for my nephew for Christmas many years ago. I wanted something that he would love, but also that was safe and would not break the bank.  After researching and making a decision I thought it would be useful to share this information with others who may be in a similar situation.
In summary - recognizing a real skateboard isn’t rocket science, but it does take some amount of brand awareness and ultimately even trial and error. We tried to take the guesswork out of it by starting SkateXS and openly sharing and celebrating each and every component we use to build our skateboards. Hopefully we have been able to share the values and priorities we put into those design decisions. 
It's apt that Tribute has taken an umbrella as the company logo. In a city that rains as much as Portland, skaters don't have too much to be stoked about. But that has done nothing to deter one of the strongest skate scenes in the US, which has the notorious Burnside skatepark, awesome brands like Tribute, and local rippers like Brent Atchley at its core.

Unlike some deck options, which are completely bare, the Bamboo Skateboards Galaxy Series Cosmic Cloud Skateboard Deck features heat-stamped artwork on the underside of the board, including several geometric and interstellar designs, including a beautiful nebula. Bamboo Skateboards claims these boards last their customers three weeks longer than other decks. They come in three sizes: 7.75-by-31.5-inches, 8-by-31.75-inches, and 8.25-by-32-inches.

Efforts have been taken to improve recognition of the cultural heritage as well as the positive effects of encouraging skateboarding within designated spaces. In 2015, the John F. Kennedy Center for the Performing Arts in Washington, D.C., hosted an event at which skateboarders accompanied by music did tricks on a ramp constructed for a festival of American culture.[68] The event was the climax of a ten-day project that transformed a federal institution formerly off-limits to the skateboarding community into a platform for that community to show its relevance through shared cultural action in a cultural common space.[69]


Powell Peralta is a brand that has been around since the late 1970s. The Powell Golden Dragon has been on the market for over four decades now, and its popularity hasn’t decreased. It’s easy to see why even legends like Steve Caballero recommend these skateboards. Powell is known for having boards that fit every age range and skill level, satisfying the needs of many. It’s also probably the reason as to why the product is surrounded by 5-star reviews.
“I just felt like it was a window of opportunity within my own career. I might be one of those lucky few who’d be able to do that, start my own brand and move on. That window of opportunity only upholds for so long in skateboarding before you miss your prime, so I’d be kicking myself in the ass five years from now looking back and saying ‘how come I didn’t capitalise on that? Here I am, an older skater and not in my prime anymore and I have nothing still connecting me to skateboarding’”
Destructo has some fancy skateboarding trucks. The Destructo raw series skate trucks come in low, medium and high designs and look oddly skinny. The Limited and Pro series trucks just look awesome, with simple pro signatures on the front and great color schemes. That's not to mention Destructo's "Rail Killer" series - these light trucks have extended baseplates to reduce wheelbite, and come in some incredible color schemes (including one using 24 karat gold!).
Radiate Ride Good Skateboards are made of 7-ply maple construction with epoxy resin glue. It features 356A heat-treated cast aluminum high performance 5.0 trucks with grade 8 kingpins and axles. The super high rebound 99A PU wheels with grooved running surface provide better traction and abrasion resistance. The Abec 5 high precision speed bearings offer precision performance and a smooth ride. It has an 80 grit durable color matched grip tape with transparency. It is completely assembled and ready to go. This product has a 4.3 rating on Amazon.
It’s not just standard deck sizes that are available for creating or replacing your board. You can just as easily get a great longboard deck to work on in your basement or garage. One of the best and best-reviewed options out there is the Loaded Boards Poke Longboard Skateboard Deck. This standard-design longboard deck has it all to help you make the ideal board. 
In 1976, skateboarding was transformed by the invention of the ollie by Alan "Ollie" Gelfand. It remained largely a unique Florida trick until the summer of 1978, when Gelfand made his first visit to California. Gelfand and his revolutionary maneuvers caught the attention of the West Coast skaters and the media where it began to spread worldwide. The ollie was adapted to flat ground by Rodney Mullen in 1982. Mullen also invented the "Magic Flip," which was later renamed the kickflip, as well as many other tricks including, the 360 Kickflip, which is a 360 pop shove-it and a kickflip in the same motion. The flat ground ollie allowed skateboarders to perform tricks in mid-air without any more equipment than the skateboard itself, it has formed the basis of many street skating tricks. A recent development in the world of trick skating is the 1080, which was first ever landed by Tom Schaar in 2012.[73][74]
Skate graphics have often incorporated blood, guts, and gore into board and T-shirt designs, but few brands render gnarliness quite as well as Heroin Skateboards. It's no surprise that a brand founded by artist Mark “Fos” Foster would have such tight art direction. Fos has a loose, low-fi handstyle that can be see in much of the brand's designs, and the delinquent band of team riders and their antics are a perfect embodimentof whatever “image” Fos is after.

They have continued to ride that wave over the past year, continuously putting out great edits, following cherry up with Sickness, Red Devil, Joyride, and Swoosh, all in collaboration with cherry’s filmer Bill Strobeck. We all know they will never fall off when it comes to putting out fire gear every new season and drop, but to keep it coming with actual great footage is another story, and is definitely making skateboarding better today.
×