Skateboarding is the best and worst thing that’ll you’ll ever have the pleasure of tearing your hair out over. In a typical day of skating, you’ll get hurt, you’ll get incredibly frustrated, and eventually land a trick that’ll make it all worth it - if you’re lucky. Choosing a skateboard is fairly simple if you know what shape and width you like. If you’ve been skating awhile, you’re probably fairly familiar with what board brands you like skating. If not, there are a number of resources to help you choose the best skateboard for your skating style. Continuing to read this little spiel is going to take the least amount of effort on your part.


A precursor to the extreme sport of street luge, that was sanctioned by the United States Skateboarding Association (USSA), also took place during the 1970s in Signal Hill, California. The competition was called "The Signal Hill Skateboarding Speed Run", with several competitors earning entries into the Guinness Book of World Records, at the time clocking speeds of over 50 mph on a skateboard. Due to technology and safety concerns at the time, when many competitors crashed during their runs, the sport did not gain popularity or support during this time.[36][37]
That’s a lot of wood! But it is by no means the end. In 2016 there were many other brands that have pleased us with wooden works of art. Chocolate were inspired by modern living shown in their Modern Homes series, Welcome beautifully presented decks in original shapes, and the two German brands Inpeddo and Mob showed that seven layers do not necessarily have to come from overseas.
Most skaters consider width is the most important dimension of the deck. That is measured straight across at the widest point of the deck. Skateboard decks generally range between 7.0 to 10.0 inches depending on the shape of the deck. There are boards that are narrower and wider than that, but they are not common and not practical for all around skating.

As with all penny boards, the Fade has a waffletop on the deck so that you have plenty of grip and stability as you ride. The plastic material of these boards is durable enough to withstand being run over, and the trucks and wheels are of similar high quality. This board is not made for the beginner that wants to skate downhill or do a lot of speedy skating – the short length makes it dangerous for that. But if you’re just interested in commuting and want something portable, this is a great choice.
One of the earliest sponsored skateboarders, Patti McGee, was paid by Hobie and Vita Pak to travel around the country to do skateboarding exhibitions and to demonstrate skateboarding safety tips. McGee made the cover of Life magazine[21] in 1965 and was featured on several popular television programs—The Mike Douglas Show, What's My Line? and The Tonight Show Starring Johnny Carson—which helped make skateboarding even more popular at the time.[22][23][24] Some other well known surfer-style skateboarders of the time were Danny Bearer, Torger Johnson, Bruce Logan, Bill and Mark Richards, Woody Woodward, & Jim Fitzpatrick.
The “popsicle” deck is the most popular shape because of its versatility and durability. These decks resemble the shape of a popsicle stick because they feature both a nose and a tail that are exactly or nearly symmetrical. Since the nose and the tail are shaped about the same, it’s easy to do tricks no matter which direction you’re headed in. Most skateboarders stick to popsicle decks because of their functionality and reliability.
Thunder trucks are solid, with some great innovations. Thunder's light truck range claims ​to be the lightest available, with the quickest turning. Thunder's team is also pretty impressive, with Thomas, Appleyard, Marks, Steamer, Ellington. The list is actually pretty huge. If having a lot of pros ride the same trucks as you is important (which isn't a bad idea - these people are skating in competitions, and want the best!), then take a look at Thunder.
It’s not just standard deck sizes that are available for creating or replacing your board. You can just as easily get a great longboard deck to work on in your basement or garage. One of the best and best-reviewed options out there is the Loaded Boards Poke Longboard Skateboard Deck. This standard-design longboard deck has it all to help you make the ideal board. 

A magazine?! This is an outrage! Yeah, it is. But Low Card has become the defacto hat brand for all the cool hesh skaters in America, so deal with it. Also, the mag's graphic tees, baseball shirts, coaches jackets, and beanies are all highly dope. The custom mesh hat program is the way to go if you feel the need to wear your “yeah, I skate” calling card on your head.
Camber & Rocker: The camber skateboards are the ones with a raised middle while rockers have dropped middle. The angle you get with camber and rocker is pretty mellow. However, the difference in shape dramatically affects the flex of your deck. Since most of the decks come with a neutral deck camber, you can still find some cruisers and longboards who feature a camber—style deck. Needless-to-say, decks having positive camber have more flex because of the higher center of gravity. In case of rocker decks, the center of gravity is low and have a sloped shape which the riders love.
While the skateboard has a lot of moving parts, one's safety, comfort, and ease to learn new skills and perform tricks are all of equal importance. For this reason, choosing the right type of deck and wheels should be two of the first considerations, as the board's shape, material construction, and wheel makeup will all have a significant impact on your ability to control the equipment and maintain good aerodynamics. Additionally, the width of the deck is important, so one must take their height, shoe size, and style of riding into account in order to ensure the deck offers as much support as possible, regardless of application.

Bearings are rated by the ABEC scale (1-9), which has nothing to do with skateboarding. Manufacturers know skaters believe higher ABEC ratings mean faster bearings. They do not, and you won’t find high-quality bearings on off-the-shelf skateboards. Most of these completes are slow. Make a bearing upgrade a top priority. Good bearings can make almost any skateboard fast. This article by longtime pro Anthony Pappalardo gives an insider’s perspective on bearings.


While the skateboard has a lot of moving parts, one's safety, comfort, and ease to learn new skills and perform tricks are all of equal importance. For this reason, choosing the right type of deck and wheels should be two of the first considerations, as the board's shape, material construction, and wheel makeup will all have a significant impact on your ability to control the equipment and maintain good aerodynamics. Additionally, the width of the deck is important, so one must take their height, shoe size, and style of riding into account in order to ensure the deck offers as much support as possible, regardless of application.

Skateboarding is the best and worst thing that’ll you’ll ever have the pleasure of tearing your hair out over. In a typical day of skating, you’ll get hurt, you’ll get incredibly frustrated, and eventually land a trick that’ll make it all worth it - if you’re lucky. Choosing a skateboard is fairly simple if you know what shape and width you like. If you’ve been skating awhile, you’re probably fairly familiar with what board brands you like skating. If not, there are a number of resources to help you choose the best skateboard for your skating style. Continuing to read this little spiel is going to take the least amount of effort on your part.
Regardless of the length of these boards, they each have several components in common that include a deck, grip tape, trucks, and wheels. The deck is the actual surface piece of the board on which a rider stands to perform tricks or control their degree of motion. Decks range between seven and ten inches in width and although seven-ply wood is the most common material for them, they can also be crafted out of bamboo, carbon fiber, and even plastic. Decks are shaped in several unique concave designs, which include radial, progressive, W-concave, tub, and asymmetric. Radial concave decks have U-shaped curves and are ideal for beginners, as they provide one's feet with a reliable grip.
Many jurisdictions require skateboarders to wear bicycle helmets to reduce the risk of head injuries and death. Other protective gear, such as wrist guards, also reduce injury. Some medical researchers have proposed restricting skateboarding to designated, specially designed areas, to reduce the number and severity of injuries, and to eliminate injuries caused by motor vehicles or to other pedestrians.[102]
Fury skateboarding trucks are heavier and stronger than most. Most skateboarders try to shave off as much weight as possible. However, Fury has some other special features to try to tempt you - Fury trucks are wider than most, come with a mini riser (similar to Phantom trucks), and special Fury bushings. And if that's not enough, Fury trucks have a unique ballpoint turning design, so that the hangar has a ball joint sitting in a socket in the base plate.
In 2015, Hockey was announced to the world as Fucking Awesome’s sister brand with the release of their first eponymous video clip ‘Hockey‘ featuring riders John Fitzgerald and Donovon Piscopo. Since that first release Hockey have added former Anti Hero rider Andrew Allen to their team, along with Ben Kadow, a move announced in their second video – Hockey II.
You should also look for the type of skateboard wheels that you will be getting with your skateboard. Soft wheels are great for cruising around uneven surfaces, while harder wheels are better for skateboard tricks and hard falls, which is vital for various skateboarding styles. The key thing to remember is the smaller wheels are slower, and bigger wheels are faster.
Today's skateboarders are founders in this sport—they're pioneers—they are the first. There is no history in Skateboarding—its being made now—by you. The sport is being molded and we believe that doing the right thing now will lead to a bright future for the sport. Already, there are storm clouds on the horizon with opponents of the sport talking about ban and restriction.[16]
FTC was cool before there were skate and hype blogs around to tell you that they were cool. Mastermind Kent Uyehara built his brand from the back of a sporting goods shop into an international symbol of cool, with franchise locations in Sacramento, Tokyo, and Barcelona. FTC isn't just the go-to spot for skate gear in those cities-it's a full-blown brand that any skater would be proud to wear.

Bearings are standardized to fit in all kinds of skateboard wheels. All bearings will eventually get dirt and gunk in them which slows you down. Regular cleaning is recommended. Higher quality bearings will perform better, roll faster, retain more speed, and last longer when cleaned regularly. Some bearings come with bearing spacers or have spacers built into the bearing. These will fit in any wheel, but are not necessary for most types of skateboarding or longboarding.
The nose and tail of a standard skateboard curve upward slightly to make tricks easier to perform. On most decks, the nose and tail are shaped slightly different. The nose is usually wider, longer and steeper than the tail which aids in nose-based (nollie) tricks, and also helps you differentiate the nose from the tail. Some shaped boards have very different nose and tail dimensions, and some old school boards lack noses all together.
Founded by the pro skateboarder Marc Johnson in the year 2000, enjoi has been on the market for over two decades now. They have since expanded, and started producing skateboarding accessories and clothing apart from just skateboards. Since then, they have adopted a panda as their logo. This logo is featured on most of their products and has quickly become the company’s trademark.
However, the diversity of Santa Cruz skateboard’s stake in the skateboard business meant that they easily survived the mid-90’s slump in popularity and returned with an newly invigorated team and powered on with video after video from the mid-90’s to the present day. Similarly to Powell-Peralta, Santa Cruz are also notable for their Veteran Division (documented in their 2007 release ‘V Day‘) celebrating pro riders such as Keith Meek, Tom Knox and Eric Dressen from earlier eras of Santa Cruz’s existence. Santa Cruz Skateboards current line of product boasts many re-released classic boards from earlier eras of the brand and are as popular, if not more so, than they were originally, thanks to an explosion in the nostalgia and collector’s markets within skateboarding.
Skateboarder owned and operated is Magenta's mantra. “No middle-man or business-person involved,” it says on the brand's site, so you know what you're getting from this French brand is pure, uncut skate to the core. All of the art direction and graphics are done by co-founder and team rider Soy Panday, who has developed a unique artistic perspective for Magenta. You'll likely to see numerous skaters kicking around on Magenta boards in NYC these days, and with a strong offering of T-shirts, coaches jackets, caps, and a funny boxer short collab with Lousy Livin, there is plenty to appreciate.

In the past decade, I have begun seeing the emergence of skate decks being totally or partially made from carbon fiber or other metal materials instead of solely wood.  These decks typically last longer than regular wooden decks and aren’t prone to chipping or breaking like most made from wood.  The drawback to these materials is that they tend to feel “stiffer” than traditional wooden decks and experienced skaters may feel they are heavier and harder to do tricks on.  Carbon fiber decks are also more expensive, but this additional cost may be worth it if you tend to break decks easily.  Some brands also offer warranties against breakage under normal conditions for carbon fiber decks if you are worried about breakage.
Girl Skateboards is the foundation of all the other brands under the Crailtap umbrella (Royal Trucks, Chocolate Skateboards, Lakai footwear etc) and was established by Mike Carroll and Rick Howard during a mass exodus of pro skaters from Steve Rocco’s brands (Plan B, Blind, 101, World Industries) reputably inspired after arguments of wheel sales royalties.
×