Founder Richard Novak is also widely credited as creating the skateboard industry as we know it today by establishing skateboarding as a separate culture and business by wrestling the sport away from the control of the roller-skating industry in the early 1970’s and promoting it through sponsoring events, supporting the nascent skateboard magazine culture, pioneering technologies within skateboard, truck and wheel construction and establishing the edgy cultural identity of skateboarding from the very beginning.

Skateboard decks width is probably one of the most important factors to consider when buying a deck.  Decks typically range from 7.25-8.5″.  7.5″,7.75″, and 8.0″ tend to be the standard widths if most decks and the general rule is that the bigger your feet are the wider the deck you should get.  Thinner decks are slightly easier to flip, however they are harder to land on due to the decreased surface area.  This is a tradeoff you have to consider, but the typical rule of thumb for younger guys is that you get wider decks the more advanced and larger you get.  Street skaters typically also like smaller decks as they are easier to navigate and carry around in crowded cities and areas.


Unlike some deck options, which are completely bare, the Bamboo Skateboards Galaxy Series Cosmic Cloud Skateboard Deck features heat-stamped artwork on the underside of the board, including several geometric and interstellar designs, including a beautiful nebula. Bamboo Skateboards claims these boards last their customers three weeks longer than other decks. They come in three sizes: 7.75-by-31.5-inches, 8-by-31.75-inches, and 8.25-by-32-inches.
This article is about regular street skateboards.  They are rounded on both ends and curved upwards.  Sometimes beginners are confused by longboards that are much larger and irregularly shaped or cruiser board that can be very small.  I just wanted to clarify this point, as this article is very helpful for choosing the best skateboard for beginners, but may provide incorrect or unimportant information if you are actually looking for longboards or cruisers.
Remember don't get those cheap skateboards from Walmart. They won't hold up to any skating and can break from a single ollie that is landed improperly. I know they are cheap, but 2 cheap boards a week for a few weeks adds up to the price of 2 or 3 expensive boards. These boards are also heavier and slow which makes them much more difficult to do tricks on.

Covering multiple countries all over the world, Skatro is widely received as one of the top mini-cruiser suppliers that are in existence. Starting from a very small office and humble beginnings, Skatro brand was determined to provide excellent care and respect to their clients while maintaining a quality product that is both mechanically sound as well as financially viable.

Let's be clear: Mike Carroll and Rick Howard are legends and modern skating wouldn't be shit without them. There. When the two good pals left Plan B to start their own brand in 1993, skateboard history was made. Girl and Chocolate are separate brands, but they act like two sides of the same family, and after 20 years making decks and apparel for skateboarders, the clan is stronger than ever.
Grip tape adds additional assurance for a rider's feet. It is made from a sheet of colored paper or fabric with adhesive on one side and a fine, sand paper surface on the other. Applied to the top surface of a skateboard, grip tape gives a person's feet an improved grip while maintaining stability for performing tricks. Skateboard trucks connect both the wheels and ball bearings to the deck and are directly attached to the deck themselves. They are usually constructed from aluminum alloy. The wheels are mounted to their axles via steel bearings. The wheels are made from polyurethane and available in a range of different shapes and sizes to suit most any skill level.

The Powell Golden Dragon 2 Skateboard is an affordable and complete skateboard for the beginners and also for the advanced skaters.  It has high-rebound, hand-cast polyurethane wheels to give you a great roll and grip.  It measures 7.5 inches wide with a colorful screen-printed bottom.  It is made in China and has an average rating of 4.2 on Amazon.
Freedom Plaza has become a popular location for skateboarding, although the activity is illegal and has resulted in police actions.[5][115] A 2016 National Park Service management plan for the Historic Site states that skateboarding has damaged stonework, sculptures, walls, benches, steps, and other surfaces in some areas of the Plaza.[5] The management plan further states that skateboarding presents a persistent law enforcement and management challenge, as popular websites advertise the Plaza's attractiveness for the activity.[5] The plan notes that vandals have removed "No Skateboarding" signs and recommends the replacement of those signs.[5]

Skateboard hardware is used to connect the skateboard trucks to the skateboard deck. Skateboard hardware refers to the bolts and locknuts used when building a board. The bolts can have an Allen or Phillips head. Skateboard hardware comes in many different lengths, and often includes one different colored bolt so that the rider can mark the nose of their board.

The deck will also have a material on top called grip tape. This textured surface is what keeps your shoes from sliding all over the place as you ride. Look for a very high-quality grip tape for extra stability as you are learning, or something that is very visibly textured (like the waffletop from the pennyboard on our list above). You can also replace the grip tape if you love a board but don’t love the grip tape it comes with.
Ancheer 31″ Pro Skateboards are made of 7-ply maple wood and finished with anti-slip grip tape.  It includes 60mm PU wheels ideal for riders who want to carve out sections, obtain speed and higher off the ground for tricks. It features 6″ Tony Hawk Signature aluminum trucks and 32″ long deck with double kick tail which is ideal for perfecting your favorite tricks.  It comes with ABEC-7 skateboard bearings.  It has style and quality which is expected from the most influential skateboarders of all time.  It is one of the best-rated skateboards on Amazon with a rating of 4.8.
The smaller the wheel diameter, the easier it is to do tricks, because it makes the board sit closer to the ground. But beginners will definitely have an easier time controlling a board with larger diameter wheels. Think of the larger wheels as being akin to training wheels. If you don’t want your board to have “pop” as you are learning, you can choose softer wheels, all the way down to a 73a. They won’t let you go as fast, and you’ll have to push off more often, but they do make it more likely that your board will stay on the ground.
In the early 1970s, Frank Nasworthy started to develop a skateboard wheel made of polyurethane, calling his company Cadillac Wheels.[7] Prior to this new material, skateboards wheels were metal or "clay" wheels. The improvement in traction and performance was so immense that from the wheel's release in 1972 the popularity of skateboarding started to rise rapidly again, causing companies to invest more in product development. Nasworthy commissioned artist Jim Evans to do a series of paintings promoting Cadillac Wheels, they were featured as ads and posters in the resurrected Skateboarder magazine, and proved immensely popular in promoting the new style of skateboarding.
Serving skateboarding since 1976, we now offer the finest complete range of skate products in the world, handcrafted to serve skaters from their first skateboard to the top professional level. Our mission is to make the best skate equipment you can buy. If you don’t already know what you want, let us help you select the skateboard components that will enable you to take your skating to the next level. Whether you’re a first-time customer or a loyal fan, we’re proud to serve you.
Ancheer 31″ Pro Skateboards are made of 7-ply maple wood and finished with anti-slip grip tape.  It includes 60mm PU wheels ideal for riders who want to carve out sections, obtain speed and higher off the ground for tricks. It features 6″ Tony Hawk Signature aluminum trucks and 32″ long deck with double kick tail which is ideal for perfecting your favorite tricks.  It comes with ABEC-7 skateboard bearings.  It has style and quality which is expected from the most influential skateboarders of all time.  It is one of the best-rated skateboards on Amazon with a rating of 4.8.
Are you on a hunt for the best skateboard on the market today? Then you are in the right place as this comprehensive article is designed to give you information about skateboarding and types of skateboards in general. By learning about the different types of skateboards and what each one can do, figuring out what works for you the best is a lot easier.
Go for the low truck profile if you want to obtain additional stability when you do flip tricks. It also works well for small wheels. The mid-sized trucks are good for all-around use, especially in streets and parks. You can also choose the high-sized trucks that are good for carving and cruising, which is the reason why they are perfect for huge wheels.
Many jurisdictions require skateboarders to wear bicycle helmets to reduce the risk of head injuries and death. Other protective gear, such as wrist guards, also reduce injury. Some medical researchers have proposed restricting skateboarding to designated, specially designed areas, to reduce the number and severity of injuries, and to eliminate injuries caused by motor vehicles or to other pedestrians.[102]
What longboard brand is good? This is a common question that arises when you want to buy a Longboard. The typical answer is a Longboard brand which can fulfill the customer’s demand at an affordable price. Let’s examine all the leading longboard makers in the past year and until now. Let’s also take a look at their feature, quality, design, color, small parts, and many other relevant criteria.
Whilst early skateboarders generally rode barefoot, preferring direct foot-to-board contact, and some skaters continue to do so, one of the early leading trends associated with the sub-culture of skateboarding itself, was the sticky-soled slip-on skate shoe, most popularized by Sean Penn's skateboarding character from the film Fast Times at Ridgemont High.[8] Because early skateboarders were actually surfers trying to emulate the sport of surfing, at the time when skateboards first came out on the market, many skateboarded barefoot. But skaters often lacked traction, which led to foot injuries.[26] This necessitated the need for a shoe that was specifically designed and marketed for skateboarding, such as the Randy "720", manufactured by the Randolph Rubber Company, and Vans sneakers, which eventually became cultural iconic signifiers for skateboarders during the 1970s and '80s as skateboarding became more widespread.[8][76][77][78][79][80]
This deck is 6-inches-by-22.5-inches with that classic cruiser shape. The board is made with 6-ply bamboo and maple construction, which is lightweight, flexible, and eco-friendly. Bamboo Skateboards claims this board has a turning radius not seen in most mini decks. The small, blank deck is heavy duty and durable in a way not all mini cruisers are. This non-carbonized board is ready for you to slap on the grip tape and artwork you want and then get riding.

Keep in mind that the deck width will also affect the size of the trucks that you use. You’ll need wider trucks to make a wider deck more stable. If you see a wide deck with narrow trucks, you can expect the ride to be wobbly and hard to manage. Pay attention to the bushings on the board as well. If the bushings are very firm, you’ll have a more stable ride, but it also makes it harder to turn. Soft bushings are much more responsive, but you do lose a little bit of stability. If you don’t know if your bushings are firm or soft, you likely have soft bushings, since this is the default.
Ohderii Skate Skateboards are made of a High-quality Plastic deck which will not easily break even when pressed over by a car.  It comes with 3.125″ all aluminum alloy trucks, 59mm 78A super smooth PU wheels and ABEC-7 stainless steel bearings.  It is ready to use and you can easily store it in your backpack.  It has an average rating of 4.5 on Amazon.
What longboard brand is good? This is a common question that arises when you want to buy a Longboard. The typical answer is a Longboard brand which can fulfill the customer’s demand at an affordable price. Let’s examine all the leading longboard makers in the past year and until now. Let’s also take a look at their feature, quality, design, color, small parts, and many other relevant criteria.
Girl’s next full-length video came in 2003 with the release of ‘Yeah Right‘ which introduced a crew of younger Girl riders including Paul Rodriguez and Jereme Rogers, along with announcing videographer Ty Evans addition to the Crailtap family. From 2002 onwards, Ty Evans had been the main driving force behind Crailtap’s video output as Spike Jonze’s Hollywood directorial career took off.
Positiv decks are usually maple, but some are hard birch. They are made using the same laminating process and glue that Powell Peralta boards use. These decks have Positiv’s super slide treatment (SST), which is essentially a plastic lining that makes the board slide more easily. The stuff works, and wax becomes less necessary for slides with these boards.
Today's skateboarders are founders in this sport—they're pioneers—they are the first. There is no history in Skateboarding—its being made now—by you. The sport is being molded and we believe that doing the right thing now will lead to a bright future for the sport. Already, there are storm clouds on the horizon with opponents of the sport talking about ban and restriction.[16]
There really isn’t a best brand….I prefer boards that are made in America by small companies or for small companies by mid sized companies. but that’s my general preference Watson and PS Stix also makes boards for a lot of companies (mostly outside the USA from what I understand) I have a couple of Welcome Jordon Sanchez decks (pressed by PS Stix) on my spare board shelf that I can wait to skate.
Flip Skateboards is a high-level skateboards company that moved from the UK to California to take advantage of the American skateboarding industry. It was launched in 1991 by Jeremy Fox and by professional skateboarder Geoff Rowley, both of whom are from the UK. They both knew that to achieve the highest levels as a skateboarding company it was important to gain the recognition one can only get in the U.S. Furthermore, in 2017, Flip partnered with the European skateboard production and distribution company HLC. The decks of Flip Skateboards are made from 7-ply maple. Customers can enjoy the standard decks as well as the P2 models which are made with an oval-shaped fiber reinforcement panel which makes them extra durable. Psychedelic designs adorned many of the Flip skateboards as well as other designs. The Flip team has 15 professional skateboarders, including names such as Tom Penny, David Gonzalez, and Luan Oliveira.
The “popsicle” deck is the most popular shape because of its versatility and durability. These decks resemble the shape of a popsicle stick because they feature both a nose and a tail that are exactly or nearly symmetrical. Since the nose and the tail are shaped about the same, it’s easy to do tricks no matter which direction you’re headed in. Most skateboarders stick to popsicle decks because of their functionality and reliability.
In 2003 Go Skateboarding Day was founded in southern California by the International Association of Skateboard Companies[53] to promote skateboarding throughout the world. It is celebrated annually on June 21 "to define skateboarding as the rebellious, creative celebration of independence it continues to be."[54][55][56][57][58] According to market research firm American Sports Data the number of skateboarders worldwide increased by more than 60 percent between 1999 and 2002—from 7.8 million to 12.5 million.[59]

That’s a lot of wood! But it is by no means the end. In 2016 there were many other brands that have pleased us with wooden works of art. Chocolate were inspired by modern living shown in their Modern Homes series, Welcome beautifully presented decks in original shapes, and the two German brands Inpeddo and Mob showed that seven layers do not necessarily have to come from overseas.
Before Zoo York, Supreme, and 5Boro, New York had SHUT. For a short while, SHUT ruled, but soon the business fell out and founder Rodney Smith left to start Zoo York with Eli Morgan Gesner (who drew the original SHUT logo), and Adam Schatz. SHUT went dormant while the three men grew Zoo York into a successful business, and when they sold it off to Ecko in 2006, SHUT was reborn. The brand's flagship store resides on New York City's Lower East Side, so you can go witness skateboard history in person any time you want.
In the early 1970s, Frank Nasworthy started to develop a skateboard wheel made of polyurethane, calling his company Cadillac Wheels.[7] Prior to this new material, skateboards wheels were metal or "clay" wheels. The improvement in traction and performance was so immense that from the wheel's release in 1972 the popularity of skateboarding started to rise rapidly again, causing companies to invest more in product development. Nasworthy commissioned artist Jim Evans to do a series of paintings promoting Cadillac Wheels, they were featured as ads and posters in the resurrected Skateboarder magazine, and proved immensely popular in promoting the new style of skateboarding.
Mixing a clean and colourful graphical identity with tongue-in-cheek parodies of existing brand logos (most notably the now largely discontinued Starbucks homage), Skateboard Cafe have carved a niche within the flooded UK skateboard market largely based on their skater-owned status, the lack of conceit in their identity and a regular and well-received output of video content.

Emerging initially via a series of spoof news bulletins created by Lev Tanju called ‘PWBC Global Skateboard News‘ and hosted on the don’twatchthat.tv site, the aesthetic that the Palace Skateboards Brand would adopt was firmly established in these early videos. Sadly now mostly deleted from the Internet, aside from a few ‘best of’ videos, the PWBC News series were a pre-cursor for the route that the brand would adopt with its comedic take on the faux-seriousness of the Skateboard Industry of the time, an emphasis on the UK grime music scene, and the introduction of numerous characters within each news segment, including Francis Shower Face who still appears in Palace releases to this day, along with snippets of footage from various sources.
However, this same company decided to ‘Cash-in’ on THE NAME BRAND, and now con-currently sells JUNK , made in China, at WAL MART. DO NOT BUY any ‘longboard’ they sell that has plastic trucks!! They are an accident awaiting a place to occur. I’ve seen wheels (from a company that prided itself on ‘the best wheels’) that are upwards of 4 mm out-of-round, which could easily cause speed-wobbles, even at pedestrian speeds. From my POV, they’ve opened themselves up to possibly numerous lawsuits, just because of the inferior quality, and poor design choices made in order to maximize profit.
Polar’s focus on its European roots and representing a type of skateboarding that everyone could relate to, plus Pontus’ masterful approach to video-making and product, created a groundswell of popularity for the brand which has retained its momentum. Mixing a heavy global team with an eclectic approach to soft goods, Polar is now viewed as one of the most influential brands in the skateboard industry as a whole.
This period was fueled by skateboard companies that were run by skateboarders. The focus was initially on vert ramp skateboarding. The invention of the no-hands aerial (later known as the ollie) by Alan Gelfand in Florida in 1976,[39] and the almost parallel development of the grabbed aerial by George Orton and Tony Alva in California, made it possible for skaters to perform airs on vertical ramps. While this wave of skateboarding was sparked by commercialized vert ramp skating, a majority of people who skateboarded during this period didn't ride vert ramps. As most people could not afford to build vert ramps, or did not have access to nearby ramps, street skating increased in popularity.
It's too cold and dark to skate in Sweden for about six months out of the year. That must be when brand mastermind/artist Pontus Alv schemes on the global takeover he's been orchestrating for Polar. Not only are the brand's hats, tees, and hoodies some of the most coveted gear in the skate universe, the Polar team travels the globe hosting events, filming video clips, and getting people hyped on vigilante-style street skating. Look for Polar to come to your hood and build awesome, illegal concrete skate obstacles under a bridge, then bounce like gnarly, European skate tooth fairies. Good luck finding a tee or hat at this point—hype has made to goods rare, but let's hope as the excitement grows Mr. Alv will expand his distro.
Skateboarders from all over know Santa Cruz Skateboards for its “Screaming Hand” logo, designed by legendary artist Jim Phillips, and the monstrous artwork displayed on the decks, including series styles such as their Star Wars and Marvel series. Founded in 1973 and distributed by NHS, Inc., the California based brand is the oldest continuous skateboard company in the world. Santa Cruz boards are made from 100% North American maple and they offer complete skateboards, decks, and cruiser boards. The Santa Cruz Skateboards team consists of 16 professional skateboarders including names such as Blake Johnson, Dylan Williams, Emmanuel Guzman, and Eric Dressen.
In the early 1970s, Frank Nasworthy started to develop a skateboard wheel made of polyurethane, calling his company Cadillac Wheels.[7] Prior to this new material, skateboards wheels were metal or "clay" wheels. The improvement in traction and performance was so immense that from the wheel's release in 1972 the popularity of skateboarding started to rise rapidly again, causing companies to invest more in product development. Nasworthy commissioned artist Jim Evans to do a series of paintings promoting Cadillac Wheels, they were featured as ads and posters in the resurrected Skateboarder magazine, and proved immensely popular in promoting the new style of skateboarding.
A magazine?! This is an outrage! Yeah, it is. But Low Card has become the defacto hat brand for all the cool hesh skaters in America, so deal with it. Also, the mag's graphic tees, baseball shirts, coaches jackets, and beanies are all highly dope. The custom mesh hat program is the way to go if you feel the need to wear your “yeah, I skate” calling card on your head.
This board is an excellent option for beginners because of its simplicity and durability. The lightly concave design allows for simple turns but doesn’t require the rider to be an excellent navigator. You can start off riding this deck down the street and use it as you learn ollies, kickflips, and how to drop in to a half pipe. It will withstand it all and look good doing it.
Silver has edged it's way onto the scene offering nice, quality skateboard trucks, with plenty of little extras to make their trucks stand out from the rest. With things like inverted kingpins and axle caps, Silver trucks are pushing their motto, "Strength with Style." Silver trucks do look nice! Silver also sports a great team, with guys like Sheckler, Dyrdek, Rodriquez and more.
Without good grip tape, skaters have a tough time staying on top of their board. The main complaints about poor grip tape tend to be that it was never very grippy or lost its grip really quickly. Once again, we recommend trusting in name brands with years of experience supporting skateboarders. Unfortunately, if you are buying a pre-made complete skateboard, you probably won't have access to the brand name of the grip. 
×