Founded by the pro skateboarder Marc Johnson in the year 2000, enjoi has been on the market for over two decades now. They have since expanded, and started producing skateboarding accessories and clothing apart from just skateboards. Since then, they have adopted a panda as their logo. This logo is featured on most of their products and has quickly become the company’s trademark.
Manufacturers started to experiment with more exotic composites and metals, like fiberglass and aluminium, but the common skateboards were made of maple plywood. The skateboarders took advantage of the improved handling of their skateboards and started inventing new tricks. Skateboarders, most notably Ty Page, Bruce Logan, Bobby Piercy, Kevin Reed, and the Z-Boys started to skate the vertical walls of swimming pools that were left empty in the 1976 California drought. This started the "vert" trend in skateboarding. With increased control, vert skaters could skate faster and perform more dangerous tricks, such as slash grinds and frontside/backside airs. This caused liability concerns and increased insurance costs to skatepark owners, and the development (first by Norcon, then more successfully by Rector) of improved knee pads that had a hard sliding cap and strong strapping proved to be too-little-too-late. During this era, the "freestyle" movement in skateboarding began to splinter off and develop into a much more specialized discipline, characterized by the development of a wide assortment of flat-ground tricks.
7.12"7.25"7.3"7.5"7.56"7.62"7.7"7.75"7.8"7.81"7.87"7.875"7.88"7.9"8"8.02"8.06"8.1"8.12"8.125"8.13"8.18"8.19"8.2"8.25"8.27"8.28"8.28"8.3"8.31"8.32"8.35"8.37"8.375"8.38"8.4"8.44"8.45"8.47"8.5"8.55"8.6"8.62"8.63"8.67"8.68"8.7"8.75"8.8"8.87"8.88"8.9"8.948.989"9.05"9.1"9.12"9.13"9.16"9.18"9.2"9.25"9.265"9.3"9.31"9.32"9.37"9.375"9.38"9.4"9.42"9.5"9.56"9.57"9.6"9.62"9.625"9.739.75"9.78"9.8"9.81"9.849.85"9.87"9.875"9.89"9.9"9.97"9.9810"10.1"10.2"10.25"10.34"10.37"10.5"11.2"11.75"
A precursor to the extreme sport of street luge, that was sanctioned by the United States Skateboarding Association (USSA), also took place during the 1970s in Signal Hill, California. The competition was called "The Signal Hill Skateboarding Speed Run", with several competitors earning entries into the Guinness Book of World Records, at the time clocking speeds of over 50 mph on a skateboard. Due to technology and safety concerns at the time, when many competitors crashed during their runs, the sport did not gain popularity or support during this time.[36][37]
In the early 1970s, Frank Nasworthy started to develop a skateboard wheel made of polyurethane, calling his company Cadillac Wheels.[7] Prior to this new material, skateboards wheels were metal or "clay" wheels. The improvement in traction and performance was so immense that from the wheel's release in 1972 the popularity of skateboarding started to rise rapidly again, causing companies to invest more in product development. Nasworthy commissioned artist Jim Evans to do a series of paintings promoting Cadillac Wheels, they were featured as ads and posters in the resurrected Skateboarder magazine, and proved immensely popular in promoting the new style of skateboarding.
See, not all boards are actually bidirectional. Most have a thick tail and a small nose but not this board. So if you’re a switch skater then this board brand is perfect for you. The urethane wheels are designed for the high stress environments and provide the top speed available. The deck tape provides the perfect grip even for those of us with older shoes that are essentially smooth on the bottom.
Mark Gonzalez created bLind Skateboards in 1989, and shortly after initiated a pro team for his skateboard brand. The bLind brand is known for higher durability due to their innovative features. The boards released by bLind are developed and marketed for hardcore skaters and top other skateboarding brands. We like that bLind goes all out providing one of the strongest boards out there, and without sacrificing the flex needed for tricks. They also do it all with a sick style and an innovative business plan that has made them one of the top skateboard brands.

You’re just looking for a quality skateboard to buy for a beginner (either you or someone you know), but you have no idea where to start.  You see bearings, hardware, wheels, decks, and trucks being advertised but don’t want to spend hours researching which individual part to buy.  This is how I felt when I was first looking to but a complete skateboard for my nephew for Christmas many years ago. I wanted something that he would love, but also that was safe and would not break the bank.  After researching and making a decision I thought it would be useful to share this information with others who may be in a similar situation.
Bearings are very important if you want to keep rolling without pushing constantly, especially while street skating. They're typically rated with the ABEC (Annular Bearing Engineering Committee) scale. The ABEC scale only measures the precision of the bearing, not how well it rolls or how long it lasts. It's a common misconception that the ABEC scale refers to how fast the bearing rolls. Anything above 1 is precision and will perform fine for skateboarding, but it's recommended to go above a 3.
Toy Machine is an Ed Templeton company and one of the best skateboard companies of its time. Ed is an Orange County original skater and developed the board he wanted to skate on, thus creating the Toy Machine Brand. Though the Toy Machine team has seen many changes, it has always held onto professional skaters that can provide insight in the latest needs of boards. Toy Machine skateboards are known for their signature monster graphics, which have made them a top skateboard brand.
Their hard and soft goods feature 90’s imagery like Kurt Cobain with Courtney Love and Corey and Topanga from Boy Meets World, and it comes together to become pure fun for the hell of it. With brand mastermind Grant Yansura holding a spot as an official videographer for Nike SB, you know he must be doing something right with all his work. His Cosmic Vomit series is just another insight into the breadth of his great work.
Freedom Plaza has become a popular location for skateboarding, although the activity is illegal and has resulted in police actions.[5][115] A 2016 National Park Service management plan for the Historic Site states that skateboarding has damaged stonework, sculptures, walls, benches, steps, and other surfaces in some areas of the Plaza.[5] The management plan further states that skateboarding presents a persistent law enforcement and management challenge, as popular websites advertise the Plaza's attractiveness for the activity.[5] The plan notes that vandals have removed "No Skateboarding" signs and recommends the replacement of those signs.[5]
They aim to make of the best distinction to recognize among a thousand brands available. Starting from scratch, the brand has become successful with the invention of drop down longboard that convinces skaters around the world to have many advantages. Their belief in “making quality skateboards that will improve life” has never faded as they grow to be in the back of Blackcomb Ski Club. They even plant a tree for every product they make and sell to prove their eco-friendly operation.
500AlmostAluminatiAnti HeroArborBambooBirdhouseBlindBonzingCometCreatureDarkstarDB LongboardsDogtownDusters CaliforniaElementEnjoiEverseshFlipFocusFoundationGlobeGoldCoastGravityHabitatJartKebbekKrookedLandyachtzLaybackLushMadridMakahaMoonshine MFGOmenPennyPlan BPowell PeraltaPrism SkatePunkedRayneRealRememberRivieraRoad RiderSan ClementeSanta CruzSector 9Suicidal SkatesToy MachineWarehouseZ-FlexZero

Powell has made sure to provide their customers with more than one design of one of their most sought-after skateboards. The Golden Dragon 2 is very similar to its predecessor, the Golden Dragon and is just as reliable as its sister model. When it comes to skateboarding, you can’t ask for a better board than the Golden Dragon 2. It’s durable, firm and thanks to the concave skateboard deck design, will allow you to do many tricks. Tricks, that other boards could possibly not support as well.
i would recommend a deck size of 8.0 to 8.25 as for brand baker,girl,chocolate deathwish, its all preference the main difference between brands is the shape of the nose and tail. As for trucks i would go with independents or thunders. thunder have a quicker and more responsive turn while independents have a more delayed smooth turn. also thunders tend to wear away faster while independents don't. As for wheels go with 52mm or 54mm either spitefire formula fours of bones stf.

Top Skateboards come from companies such as Blind Skateboards. Professional skateboarder Mark Gonzales founded the brand and it was launched in 1989. Today, products are distributed by Dwindle Distribution. The brand is intended for serious, hardcore skateboarders. It has an emphasis and an appreciation for the graphics used for its decks. In the early 1990s, Blind Skateboards set itself apart from other skateboard brands by creating videos. Their first, directed by Spike Jonze, appeared in 1991. You can get completes at Blind that includes the decks, wheels, trucks, and bearings. The Blind Team is professional skateboarders Cody McEntire, TJ Rogers, Kevin Romar, Sewa Kroetkov, Morgan Smith, Sam Beckett, Micky Papa, Yuto Horigome, and Jason Thurtle.
Here's a list of the best skateboard truck brands (read about Trucks in the Skateboard Dictionary). Trucks can be expensive, and picking out the right set of skate trucks can seem tough. But, if you get a pair of trucks off of this list, you should be good. There are other brands that are good quality too, but each of these brands has something that helps it to really stand out. These aren't put in any particular order.
Powell has made sure to provide their customers with more than one design of one of their most sought-after skateboards. The Golden Dragon 2 is very similar to its predecessor, the Golden Dragon and is just as reliable as its sister model. When it comes to skateboarding, you can’t ask for a better board than the Golden Dragon 2. It’s durable, firm and thanks to the concave skateboard deck design, will allow you to do many tricks. Tricks, that other boards could possibly not support as well.
Quality wheels won’t mean much if you don’t have nice bearings which allow the wheels to spin freely on the axle of the skateboard truck. A quality set of bearings will spin well right away and actually get even better once broken in a bit. If quality bearings get dirty, they can typically be taken apart and cleaned relatively easily. A good set of bearings typically runs between $10 - $16.
Tensor trucks are the most highly engineered skateboard trucks on the market. Tensor trucks are like the Cadillac of trucks and have the brilliance of skateboarding legend / engineer Rodney Mullen as a driving force. Tensor trucks come in both standard and low designs, and should work excellently in most skateboarding situations. Sort of a perfect all-round well-built skateboarding truck.
Skateboards can be bought online and in your local stores.  However, choosing a good skateboard can be challenging.  If you are a beginner there are a lot of things that you have to consider.  Aside from the cost, you should also check the entire board such as the wheels, the deck, the trucks, and others.  Here, we have compiled the best skateboards for sale that you can choose from right now.
Zoo York originated in 1993 and is based out of New York. Its name and signature name came from the underground subway tunnel dubbed as Zoo York. The tunnel runs under the Central Park Zoo, however it’s primarily known from the graffiti subculture of the 1960’s and the 1970’s. The Zoo York tunnel was a prime hangout of its day and was originally tagged by some of the first east coast graffiti artists. Zoo York carries a unique style from the subway tunnel days, and it comes through in their graphics and street skating designs; not to mention their high durability design. They round off our list of the 10 top skateboard brands in the market. Zoo York is an innovative company that has worked its way up to being one of the best skateboard brands in the world.
As the oldest brand on this list, Santa Cruz rightly holds the distinction of being the oldest skateboard brand in the industry and thus, the brand which effectively created the modern skateboard brand as we know it today. Founded as part of NHS Inc. a Santa Cruz based skateboard distribution company over 40 year ago, Santa Cruz as a brand has played a large part in every era of skateboarding history since its inception.
Finally, consider the type of grip tape you'll want on the board. While function is important in this regard to give your feet ample support, there's nothing wrong with adding some bling to the board's surface either. Many skateboard retailers will offer you several choices of grip tape and board styles, so it's definitely important to ask a lot of questions.
If you’re a beginner and you want a board that gives you a little of everything to discover, you cannot go wrong with this ENJOI board. You get everything you need, all ready to go out of the box, and made with professional-grade components. The ENJOI also earns points for having that classic cool artwork on the deck that makes it fun to show off at the park.
The Golden Dragon is a fantastic board for beginners, and it’s all in the wheels. The high-rebound polyurethane wheels are hand-cast and offer amazing grip as you ride, plus fantastic roll. The deck itself is just slightly longer than a standard skateboard, which offers a bit more stability for beginners, who might be worried about sliding or slipping off a shorter board. Additionally, this board features the All Powell-Peralta Ligament strap, an important safety feature that keeps the deck together if it should break. This helps prevent injury and provides a little more peace of mind for the rider.
Welcome is doing everything the way that people would probably tell you not to when it comes to how they run their board company. With no real full-length project out since it became a company, and with no pros to name, but boasting a full roster of official riders, Welcome is as unorthodox of a skate company as it gets. They don’t even make a single board in the traditional popsicle shape most boards are made today.
Here's a list of the best skateboard truck brands (read about Trucks in the Skateboard Dictionary). Trucks can be expensive, and picking out the right set of skate trucks can seem tough. But, if you get a pair of trucks off of this list, you should be good. There are other brands that are good quality too, but each of these brands has something that helps it to really stand out. These aren't put in any particular order.
If you want to be able to practice your new hobby anywhere and everywhere, the Fade is an excellent choice. This is a short skateboard that measures only 27 inches long, made of lightweight (yet still durable) plastic. That means it’s easy to toss into a backpack and carry with you on your commute, to school, or anywhere. It’ll also fit into a locker at the gym or school quite easily.
Fury skateboarding trucks are heavier and stronger than most. Most skateboarders try to shave off as much weight as possible. However, Fury has some other special features to try to tempt you - Fury trucks are wider than most, come with a mini riser (similar to Phantom trucks), and special Fury bushings. And if that's not enough, Fury trucks have a unique ballpoint turning design, so that the hangar has a ball joint sitting in a socket in the base plate.
Skateboarding has also become a major source of inspiration for high-end fashion brands, as they design their own interpretations of the skate culture and style from graphic T-shirts, five-panel hats, cropped, wide-leg pants, and skateboarding sneakers from the brands like Vans. But there’s no faking the original, and the brands that do it best are the ones that have a long-time heritage in the sport of the board, unlike the luxury labels simply trying to capitalize on the look.
Taotao Girls Skateboards comply to United State Consumer Product Safety Commission (CPSC) Standard.  It has a 24″ X 6″ Maple Double Kickside Deck. It features 608Z Bearings, 3.5″ Plastic Truck & Base, and 50 x 30 mm PVC Wheels.  The Safety helmet, Knee and  Elbow Pads also comply to CPSC Standard.  It has a Cool Pink Aloha Graphic Design with an Amazon rating of 4.3.
So now that you have an idea of what size and shape board you like, it’s time to choose a brand. A popular size is an 8.5 skateboard deck. If you were looking for a size 8.5 skateboard deck, you could narrow the decks offered on CCS.com to fit in the 8.25 - 8.5 range. This will show you all the boards in that range, and significantly reduce the boards you have to look through. Now, if you don’t have a preference on board brands, find a graphic you like and you’re all set. If this is your first skateboard or are still learning about what wood and brands you prefer, we recommend checking out a CCS Skateboard. They give you a bang for your buck, that's for sure.
It’s best to not go overboard with spending a lot of cash on your first skateboard. After all, it will take a lot of beating, and will surely be reduced to looking like a scratched plank of wood! Best skateboards to learn on include budget, beginner skateboards that offer you all the quality features a more expensive skateboard would, but at a lower expense. If you are new to skateboarding, it’s also recommended to get a skateboard with smaller wheels, since they go slower and are less intimidating!
As with all penny boards, the Fade has a waffletop on the deck so that you have plenty of grip and stability as you ride. The plastic material of these boards is durable enough to withstand being run over, and the trucks and wheels are of similar high quality. This board is not made for the beginner that wants to skate downhill or do a lot of speedy skating – the short length makes it dangerous for that. But if you’re just interested in commuting and want something portable, this is a great choice.
Individuality and a self-expressed casual style have always been cultural values for skateboarders, as uniforms and jerseys are not typically worn.[88] This type of personal style for skateboarders is often reflected in the graphical designs illustrated on the bottom of the deck of skateboards, since its initial conception in the mid seventies, when Wes Humpston and Jim Muri first began doing design work for Dogtown Skateboards out of their garage by hand, creating the very first iconic skateboard-deck art with the design of the "Dogtown Cross".[89][90][91]
Following stints on the US brands Mad Circle and Arcade and a pro model on the then hugely popular European brand Cliche skateboards, Pontus Alv quit his board sponsor and moved back to his hometown of Malmo, Sweden in the early to mid 00’s. During this time Pontus took what might be called a creative hiatus but which would be more accurately explained as a re-connection with his roots. After returning to Malmo, Alv became heavily involved in building and creating the scene there, working alongside friends to build a number of DIY skatespots through the city such as the now legendary Savanna-side and Steppeside projects.

Punisher’s Cherry Blossom skateboard is really one of a kind. Not only does it come with a high-quality, durable pro deck, but it has a perfect price for a beginner skateboard. If you have been meaning to try out skateboarding for a while now, this is the best skateboard to start with. It has a quality craftsmanship combined with a budget-price, making it widely available to the general public. The heavy-duty design makes sure that you will get all the best features from this board. Features that can usually only be noticed when buying more expensive products!
This skateboard is within the 22 inch category, (there are other categories according to size ranging from 22 inch to 36 inch longboards) and the Jet Black Lilac is our personal favorite. We love the twist of the color which is for people who want to keep it simple with just a dash of color. It also has some other amazing specifications like classic waffle top non-slip deck, 3-inch aluminum trucks with powder-coated finish and 59mm, 83A wheels for a smooth ride.
Aside from their prodigious online output since the release of their last full-length video, (often via Daewon Song’s own Instagram account which currently has close to a million followers alone), Almost are also renowned for their experiments in board construction technology – in particular the Almost Impact Support range and the Über Light series which incorporate carbon-fibre into skateboard construction to reduce weight and increase strength/flex.
×