Founded in 2008 in Pennsylvania, Punisher’s goal has been to make graphically pleasing skateboards that have designs that resonate with the rider on a deeper level. Each artist is handpicked by Punisher to design an original, unique image that is then incorporated into the skateboard. The fantastic graphic designs combined with the quality of the skateboard itself make for a very personalized riding experience.

If you have a great passion for the downhill ride as well as cruising and you are a beginner of longboarding, then ultimately, this board can satisfy your needs. It’s a versatile board as you can use it for cruising and downhill riding. The board is equipped with the perfect wheel size — not so big and not so small. It is big enough to give you a smooth ride but it is not too big to get wheel bite. Isn’t it cool? The 44 inches size of its wheels is perfect for comfortable cruising as well as riding downhill. It has some flex which will reduce the stress on your ankle and knees.


Whilst early skateboarders generally rode barefoot, preferring direct foot-to-board contact, and some skaters continue to do so, one of the early leading trends associated with the sub-culture of skateboarding itself, was the sticky-soled slip-on skate shoe, most popularized by Sean Penn's skateboarding character from the film Fast Times at Ridgemont High.[8] Because early skateboarders were actually surfers trying to emulate the sport of surfing, at the time when skateboards first came out on the market, many skateboarded barefoot. But skaters often lacked traction, which led to foot injuries.[26] This necessitated the need for a shoe that was specifically designed and marketed for skateboarding, such as the Randy "720", manufactured by the Randolph Rubber Company, and Vans sneakers, which eventually became cultural iconic signifiers for skateboarders during the 1970s and '80s as skateboarding became more widespread.[8][76][77][78][79][80]
Krux make some great trucks. Krux makes "downlows" trucks, that have a lower hanger and kingpin than even Grind King. However, you will need a hex tool to adjust them. The Krux IIIs with Topless System are even lighter, with special bushings that feel broken in from the start, but that also provide a faster snap back into position. Krux trucks are light and low.
There’s no way have never seen a Palace logo at this point, and if you haven’t that’s cause you shleep, bruh. Palace is one of the best out there doing the whole “high fashion or skate brand?” thing, and they hold a unique place on this list for being one of the few brands not based and started in the U.S. The Palace Wayward Boys Choir, like many before them, turned their group of friends into a successful crew of respected pros, who you will never see on Fox Sports 1 skating in a multi-million dollar contest.
Following stints on the US brands Mad Circle and Arcade and a pro model on the then hugely popular European brand Cliche skateboards, Pontus Alv quit his board sponsor and moved back to his hometown of Malmo, Sweden in the early to mid 00’s. During this time Pontus took what might be called a creative hiatus but which would be more accurately explained as a re-connection with his roots. After returning to Malmo, Alv became heavily involved in building and creating the scene there, working alongside friends to build a number of DIY skatespots through the city such as the now legendary Savanna-side and Steppeside projects.

The list of five best skateboards for beginners will give you a good idea on how to choose the best skateboard for beginners. You can ask assistance from the professional for the tips and tricks to becoming a pro. A good quality skateboard built for beginners can help you learn to ride a skateboard easily and once you are pro, you can advance to intermediate or pro and purchase skateboard for your level. It is an exciting outdoor sport enjoyed by thousands around the world and can serve as a commuting facility to your school, college or workplace.
The wheels of your skateboard can greatly affect your ride in numerous ways, such as the speed, your ability to take control of the skateboard’s movements, and what you feel while riding the board. The good news is that they come in various sizes, levels of durability, and colors, allowing you to pick one that suits your skateboard preference and style.
If you have a great passion for the downhill ride as well as cruising and you are a beginner of longboarding, then ultimately, this board can satisfy your needs. It’s a versatile board as you can use it for cruising and downhill riding. The board is equipped with the perfect wheel size — not so big and not so small. It is big enough to give you a smooth ride but it is not too big to get wheel bite. Isn’t it cool? The 44 inches size of its wheels is perfect for comfortable cruising as well as riding downhill. It has some flex which will reduce the stress on your ankle and knees.
This brand gets its name from a slang term for strip club. One video was called “Chicken Bone Nowison,” and it opens with a scene of skater pummeling a security guard. Is that not awesome enough? If there is a company that embodies a more perfect IDGAF attitude in skateboarding, please let me know. For the homies, by the homies is their mantra, which is pretty cool with a team comprised of rippers like Theotis Beasley, Andrew Reynolds, Dustin Dollin, Jim Greco, Terry Kennedy, Lizard King… The list goes on.

Krown has been producing skateboards since the late 1990s, which was the time when skateboards lived through a revival and became a popular hobby once again. Since then, Krown’s goal has been to create quality skateboards with budget prices. This has made Krown skateboards well sought after among beginners who want to try out extreme sports, and need a starting board. Even though Krown started out selling only skateboards, they have evolved to also sell longboards, pads, helmets and the alike over the years.

Skateboarders like things that aren't skateboarding, too, you know. Camping, fishing, motorcycles… Uh, skateboarding? Crap. Whatever. Pro skater Adrian Lopez founded Loser machine and the Dark Seas Division as a way to explore other facets of the culture through cool clothing. Loser Machine is a complete collection that goes far beyond that typical tees, jeans, and hats formula that many skate apparel brands rely on—leather motorcycle gloves, denim vests, and floral print button-downs are all evidence that this is a well-conceived project from a skater with good taste.
A “razor tail” is the term for when the tail of the skateboard deck becomes sharpened and worn due regular use and scraping the tail of your skateboard on the ground to stop.  When your deck gets razor tail, its becomes a weapon against you and anyone need you while you’re skating as being hit with a sharpened tail is very painful.  To avoid this from happening, you could buy a carbon fiber deck that may be more resistant to wear, but more importantly you should not scrape your tail to stop.  Instead you can lightly place one foot or toe down to slow your speed or powerslide to a stop.
FoundationFriendship SkateboardsFrogGhetto WearGirlGlassyGlobeGoldGood Worth & Co.GoProGrizzlyGullwingHabitatHappy HourHard LuckHawgsHeritageHeroinHoppsHosoi SkatesH-StreetHUFIllegal CivilizationIndependentIsleJessupJust Have FunKnow Bad DazeKrookedKruxKryptonicsLakaiLandyachtzLevi'sLib TechLitraLoadedLoser MachineLowcardLuckyLurkvilleMagentaMatixMini LogoMizuMOB GRIPModusMoonshine MFGMouseNew BalanceNike SBNorthern CompanyNumbers EditionOfficialOJOrangatangOrbsOthernessPaisleyParisPassportPigPizzaPlan BPolar Skate Co.PoliticPortland Wheel CompanyPowell PeraltaPowerflexPrismProgramProTecPyramid Country
Playwheels Disney Skateboard For Kids is a 21″ Wood single kicktail deck with painted edges.  It has clear sand spray top grip with color graphic and full-color bottom graphics with a retro shape.  It features multi-colored composite truck and baseplate components with carbon steel axles.  This is great for kids who are starting to learn skating.  It has an average rating of 4.2 on Amazon.
Skateboarding has become a very popular means of transport over the years. Skateboards are great, no matter if you’re a student looking for a product to help you get around, a mother of two or just a skateboarding enthusiast. Getting around can be tricky, especially if your city is packed with traffic and fumes, and you don’t want to add to the problem. If you don’t mind cruising on the side of a pavement or a relatively clean road, skateboards can be a great way to have some fun and experience a new hobby.

This deck is 6-inches-by-22.5-inches with that classic cruiser shape. The board is made with 6-ply bamboo and maple construction, which is lightweight, flexible, and eco-friendly. Bamboo Skateboards claims this board has a turning radius not seen in most mini decks. The small, blank deck is heavy duty and durable in a way not all mini cruisers are. This non-carbonized board is ready for you to slap on the grip tape and artwork you want and then get riding.
There is one question that one or another might have had in mind before: What is the best skateboard deck brand? Unfortunately, we don’t have a satisfying answer. But we did our very best and moved mountains by coming up with a very complex formula that takes sold decks, brand shop visits, search queries and lots of other fripperies into consideration to display a list of your favourite skateboard brands of 2017.
The laws for skateboarding helmets vary from state to state. Many states require that skaters wear a helmet under a certain age, and some states like California make all skaters under 18 wear a CPSC Certified helmet at all times. CSPC skateboard helmets usually have an EPS protective liner that meets the safety standards for skateboarding. Make sure you check your state's regulations before ordering.
If you are looking to buy a reliable skateboard that will keep you busy for years to come, the Whitey Panda is the ideal choice. It’s a very good entry-level skateboard that can be put through a lot of wear and tear. The solid, metal skateboard trucks ensure that you will be kept sturdy and safe both on and off the ground. This helps the rider feels more confident when doing tricks, no matter where they are.

Moreover, we love how this cruiser skateboard is a beautiful concave shape with stunning graphics. We love its 7 ply deck with its 65mm Road Rider 78a wheels that are perfect for a quick ride out of your door. Its cruiser shape is excellent for pulling off tricks and also downhill riding.  It has one of the best trucks around bullet B137 blue and white trucks and also comes with grip tape, Sand spray grip; measures 27.7 x 8.8 inches.
Keep in mind that the deck width will also affect the size of the trucks that you use. You’ll need wider trucks to make a wider deck more stable. If you see a wide deck with narrow trucks, you can expect the ride to be wobbly and hard to manage. Pay attention to the bushings on the board as well. If the bushings are very firm, you’ll have a more stable ride, but it also makes it harder to turn. Soft bushings are much more responsive, but you do lose a little bit of stability. If you don’t know if your bushings are firm or soft, you likely have soft bushings, since this is the default.
A precursor to the extreme sport of street luge, that was sanctioned by the United States Skateboarding Association (USSA), also took place during the 1970s in Signal Hill, California. The competition was called "The Signal Hill Skateboarding Speed Run", with several competitors earning entries into the Guinness Book of World Records, at the time clocking speeds of over 50 mph on a skateboard. Due to technology and safety concerns at the time, when many competitors crashed during their runs, the sport did not gain popularity or support during this time.[36][37]

Progressive designs deliver a more dramatic upward curve and a wider base, providing increasingly secure footing and a locked-in feel. The W-concave shape is more narrow with an additional center curve, allowing for a greater shift in energy between the heel and toe. This design also boasts more responsive control and quick turning capabilities. Tub concave decks resemble the radial shape, however their rails extend at a sharp angle instead of a gradual curve. Asymmetrical decks feature rails that extend at different angles, affording more power to a rider's heels when making turns. Less commonly used are decks with convex and completely flat shapes. Convex boards offer an upwards-arching shape, which some downhill skateboarders prefer for a more natural feel, whereas flat designs increase available foot space and are more popular for experienced riders looking to perform fancy tricks.
If you love the outdoors, traveling in style, and prefer to have as much control over your mode of transportation as possible, a skateboard is just what you need. Not just for high school kids or sports celebrities like Tony Hawk, the skateboard can be a useful and fun tool that can take you wherever you need to go, while also being a great outlet for the release of energy.
I rode for them as a ‘Amateur’ skateboarder in ‘79-’80, and they, at that time, had one of the Best boards out on the market, made of Fiberglass in a torsion box, with a foam core, and urethane ‘bumpers’ all around. I still have that board, and one set of C-70 Reds from then. I skated that gear hard, for many years, too. I still own 6–7 full sets of “krypto’s” for skateboards, and 8 that’re on quad-roller-skates. Great wheels, and they’re still in use.
Powell Peralta has gained increasing popularity in the 1980s, when skateboarding became an increasingly more sought-after action sports. Since then, they have been developing skateboards tailored to customers, taking reviews and critiques into consideration every time they were building a new model. The Powell Golden Dragon is a direct result of such careful consideration and tailored-modeling.
Unique Designs: The unique designs of Globe skateboards make them one of the most innovative and unique skateboard companies in the world today. They were professional skateboarders who began their business because they were not satisfied with the quality of boards available. With Globe, that changed. You can now count on reliable, unique designed boards.

If you decide that you don’t want to spend the money for a pro-quality complete, then this is your best bet for a completely blank skateboard.  You’re just not going to find anything else with similar quality anywhere near this price range.  This blank skateboard is an even 8″ with 9 layers of plywood in the deck.  This makes it ideal for any beginner especially adults or children with large feet.  A great option for someone on a budget or if you want to try a no-frills quality skateboard setup, before deciding if you want to invest further on a pro-style skateboard.
Want the same great performance and high-quality construction as a name brand deck but don’t have a large budget?  Blank decks are your answer. Depending on the brand, blank decks can be similar or better than pro decks and are available in just as many or more shape options.  These decks are perfect for people who love skating and don’t really care about supporting a profession or the graphic on their deck.  Blanks are also great for aggressive skaters who go through decks quickly as many blank skateboard decks are sold in bulk packs of 3, 5, or even 10 decks per pack.
What longboard brand is good? This is a common question that arises when you want to buy a Longboard. The typical answer is a Longboard brand which can fulfill the customer’s demand at an affordable price. Let’s examine all the leading longboard makers in the past year and until now. Let’s also take a look at their feature, quality, design, color, small parts, and many other relevant criteria.
It’s long deck and premium bearings will give you the ease of pushing which will help you to tear out of around- town traveling. It has a unique shape of the perimeter which offers you 9.6 inches of leverage per turn. Can you imagine it? It also helps you to eliminate the wheel bite. This board has a maple covered deck that will certainly catch the attention of others. It is almost impossible that you cease to enjoy the splendor and elegance of this board. Furthermore, along with your stylish longboard, 245 mm axles are incorporated.
Punisher’s Cherry Blossom skateboard is really one of a kind. Not only does it come with a high-quality, durable pro deck, but it has a perfect price for a beginner skateboard. If you have been meaning to try out skateboarding for a while now, this is the best skateboard to start with. It has a quality craftsmanship combined with a budget-price, making it widely available to the general public. The heavy-duty design makes sure that you will get all the best features from this board. Features that can usually only be noticed when buying more expensive products!
The Bamboo Skateboards Galaxy Series Cosmic Cloud Skateboard Deck is an excellent option. This concave board is made exclusively of a bamboo hybrid, rather than pure maple. This means the deck is lighter, stronger, more flexible, and can even absorb shock better. The non-carbonized, light-wood deck is made of 6-ply wood and is in its fourth generation of designs.
Radiate Ride Good Skateboards are made of 7-ply maple construction with epoxy resin glue. It features 356A heat-treated cast aluminum high performance 5.0 trucks with grade 8 kingpins and axles. The super high rebound 99A PU wheels with grooved running surface provide better traction and abrasion resistance. The Abec 5 high precision speed bearings offer precision performance and a smooth ride. It has an 80 grit durable color matched grip tape with transparency. It is completely assembled and ready to go. This product has a 4.3 rating on Amazon.

“As far as the actual look of the vast majority of contemporary graphics goes, I’d say that it feels to me as if something has been lost. It’s down to what you can do with modern heat transfer printing techniques – you can literally just take a photograph from the Internet and print it identically straight onto a skateboard. Speaking personally, there’s very little to challenge you there: either from the point of view of creating graphics, or from the consumer’s perspective. Whereas back when screen-printing was the norm, every time a graphic was produced the artist was physically cutting the key line out by hand. The key line is the final black line that forms the outline of whatever it is that you’re printing and ties in all the other colours together. You can see this in the early Sean Cliver graphics for example, where it’s clear that he has hand cut the key lines as precisely as he was able to, but looked at from today’s perspective they’re not perfectly precise, which is what gives Cliver’s earliest stuff its specific look in my opinion.”

×