Skateboarders from all over know Santa Cruz Skateboards for its “Screaming Hand” logo, designed by legendary artist Jim Phillips, and the monstrous artwork displayed on the decks, including series styles such as their Star Wars and Marvel series. Founded in 1973 and distributed by NHS, Inc., the California based brand is the oldest continuous skateboard company in the world. Santa Cruz boards are made from 100% North American maple and they offer complete skateboards, decks, and cruiser boards. The Santa Cruz Skateboards team consists of 16 professional skateboarders including names such as Blake Johnson, Dylan Williams, Emmanuel Guzman, and Eric Dressen.
The wheelbase of a skateboard deck is the distance between the centers of the inner most truck mounting holes. This distance ranges between 13.5 to 16 inches and is generally proportional to the deck length on standard popsicle decks. Some specially shaped boards and cruiser decks have differing length/wheelbase ratios. Wheelbase can impact stability and turning radius, but the effect is often subtle and not a major concern for a beginner.

The problem with wheel bite is that it tends to stop the motion of the wheels. This can result not only in a bad wipeout for the rider but also damage to the wheels. With the help of the riser pads, it is easier for you to preserve the deck of your skateboard since these pads can reduce the tendency of having stress cracks on where the trucks and deck meet.

Both your height and weight should play an important role when you are choosing a skateboard. You need to find a skateboard, which fits your weight and height. Picking one, which is either too small or too big might only cause you to experience difficulty controlling it, especially if you are still a beginner learning the ins and outs of skateboarding.
There followed a video release containing a remix of archive footage of Glaswegian born ex Blueprint pro skater Colin Kennedy who was awarded a guest board by The National Skate Co in 2015 that referenced an earlier Irn Bru graphic of Kennedy’s released in 1996 during his time on Panic Skateboards. Additionally, The National Skate Co released another limited edition homage series of product to celebrate the classic 1997 UK video Playing Fields with the blessing of those involved in making the video originally.

Be sure to purchase from a reputable source. Buying online might save you a few dollars, but try your local skate shop first. The few extra dollars you spend support the shop and your local skate community. Developing a good relationship with a local skate shop often saves you money in the long run. The completes are not as good as custom made, but you can get them for a lot less money and upgrade any bad components later.


Real Skateboards are also notable for the brand’s deep involvement in raising awareness and funds for charitable concerns related to the skateboard community across the globe with the brand supporting everything from DIY skatepark builds, to releasing bespoke Real boards for fallen members of the skateboarding community including releasing a board in memory of UK skate shop owner and stalwart of the British skate scene Steven ‘Bingo’ Binks back in 2011.
You seem to love Toy Machine deep in your heart! Ed Tempelton’s brand did well this year and landed four places above last year’s ranking. In addition to many other exhilarating designs, the Turtles deck series was the most acclaimed one. The quality is proven by team riders such as Leo Romero, Collin Provost, Daniel Lutheran and Co. You can get your Toy Machine deck from 59.99 € | 50.00 GBP!
Founder Richard Novak is also widely credited as creating the skateboard industry as we know it today by establishing skateboarding as a separate culture and business by wrestling the sport away from the control of the roller-skating industry in the early 1970’s and promoting it through sponsoring events, supporting the nascent skateboard magazine culture, pioneering technologies within skateboard, truck and wheel construction and establishing the edgy cultural identity of skateboarding from the very beginning.
Skateboarder owned and operated is Magenta's mantra. “No middle-man or business-person involved,” it says on the brand's site, so you know what you're getting from this French brand is pure, uncut skate to the core. All of the art direction and graphics are done by co-founder and team rider Soy Panday, who has developed a unique artistic perspective for Magenta. You'll likely to see numerous skaters kicking around on Magenta boards in NYC these days, and with a strong offering of T-shirts, coaches jackets, caps, and a funny boxer short collab with Lousy Livin, there is plenty to appreciate.
Choosing a good skateboard can be tricky, if you're a beginner in the sport. There's a lot that you have to take into account, in addition to the cost. You have to also consider the complete board, the deck, the trucks, and the wheels, whether you're buying a ready-made skateboard or are putting together your own. Once you understand what makes a good skateboard, you'll be hitting up the skate parks in no time.
Skateboarding, as we know it, was probably born sometime in the late 1940s, or early 1950s,[citation needed] when surfers in California wanted something to do when the waves were flat. This was called "sidewalk surfing" – a new wave of surfing on the sidewalk as the sport of surfing became highly popular. No one knows who made the first board; it seems that several people came up with similar ideas at around the same time. The first manufactured skateboards were ordered by a Los Angeles, California surf shop, meant to be used by surfers in their downtime. The shop owner, Bill Richard, made a deal with the Chicago Roller Skate Company to produce sets of skate wheels, which they attached to square wooden boards. Accordingly, skateboarding was originally denoted "sidewalk surfing" and early skaters emulated surfing style and maneuvers, and performed barefoot.[6][9][11]
Modern decks are made with a composite of thin layers of either maple or bamboo pressed into a near symmetrical shape with a nose equal to or longer than the tail. The deck should be concave (subtle U shape) along the whole board with both the nose and tail angled upwards (the "kick" of the board). Conceptually while the skateboard is a platform, it also serves to cup the balls of the skater’s feet with rising sides, nose and tail providing the foundation for pretty much all modern skateboard tricks.
FTC has grown from being the staple skate shop of the Bay Area to being a respected brand pushing skateboarding across the globe. Their SF flagship sits in the famous Haight Ashburry district, always attracting visitors and giving them a look into what skateboarding is really like in this day and age. FTC will have you covered in their own gear, and will also always be pushing the next big thing in their shops, and they never make a bad call.

It’s best to not go overboard with spending a lot of cash on your first skateboard. After all, it will take a lot of beating, and will surely be reduced to looking like a scratched plank of wood! Best skateboards to learn on include budget, beginner skateboards that offer you all the quality features a more expensive skateboard would, but at a lower expense. If you are new to skateboarding, it’s also recommended to get a skateboard with smaller wheels, since they go slower and are less intimidating!
The skateboards on this list will all suit one type of person or another, but they all have drawbacks that keep them from being true pro boards. The best skateboards is the one that requires the fewest upgrades to be great. Replacing skateboard parts is just part of the game, as street skating is destructive by its very nature, but it should take a while.
Made with bamboo and fiberglass, this board is tough, flexible, and ready for anything. The construction is designed to feel and act like a snowboard. The drop-through design is perfect for freestyle longboarding, commuting, carving, pumping, and more. It gives you better stability and more wheel clearance. The board is definitely best designed for carving but tricks and kicks are easily done as well.
Freestyle skating remained healthy throughout this period, with pioneers such as Rodney Mullen inventing many of the basic tricks that would become the foundation of modern street skating, such as the "Impossible" and the "kickflip". The influence that freestyle exerted upon street skating became apparent during the mid-1980s; however, street skating was still performed on wide vert boards with short noses, slide rails, and large soft wheels. In response to the tensions created by this confluence of skateboarding "genres", a rapid evolution occurred in the late 1980s to accommodate the street skater. Since few skateparks were available to skaters at this time, street skating pushed skaters to seek out shopping centers and public and private property as their "spot" to skate. (Public opposition, in which businesses, governments, and property owners have banned skateboarding on properties under their jurisdiction or ownership, would progressively intensify over the following decades.)[40][41] By 1992, only a small fraction of skateboarders continuing to take part in a highly technical version of street skating, combined with the decline of vert skating, produced a sport that lacked the mainstream appeal to attract new skaters.
The skateboards on this list will all suit one type of person or another, but they all have drawbacks that keep them from being true pro boards. The best skateboards is the one that requires the fewest upgrades to be great. Replacing skateboard parts is just part of the game, as street skating is destructive by its very nature, but it should take a while.
This past year, they dropped the insant classic VHS series of decks, playing off of the nostalgia of old blank VHS tapes used to film back in the 90’s, creating a high demand for restocks in skate shops across the world. This series almost singlehandedly brought them back in the forefront of skating to the world beyond New York, and we can only wait to see what they’ll do next.
The magazine only lasted four issues, but resumed publication as Skateboarder in 1975.[16][17][18] The first broadcast of an actual skateboarding competition was the 1965 National Skateboarding Championships, which were held in Anaheim, California and aired on ABC’s “Wide World of Sports.[19][20] Because skateboarding was a new sport during this time, there were only two original disciplines during competitions: flatland freestyle and slalom downhill racing.[6]
Thunder trucks are solid, with some great innovations. Thunder's light truck range claims ​to be the lightest available, with the quickest turning. Thunder's team is also pretty impressive, with Thomas, Appleyard, Marks, Steamer, Ellington. The list is actually pretty huge. If having a lot of pros ride the same trucks as you is important (which isn't a bad idea - these people are skating in competitions, and want the best!), then take a look at Thunder.
The DreadXBoards Concave Skateboard has Plastic Deck Injection Molded for excellent durability. It features Urethane Wheels 59mm 78a, aluminum trucks, and Abec 7 Bearings. It is completely assembled and is ready to ride. It is perfect for beginners or experienced riders. It can load up to 185 lbs. It is great for kids and adults. It has an excellent rating of 4 on Amazon.
Many cities also began implementing recreation plans and statutes during this time period, as part of their vision for local parks and communities to make public lands more available, in particular, for skateboarding, inviting skateboarders to come in off of the city streets and into organized skateboarding activity areas. By 2006 there were over 2,400 skateparks worldwide and the design of skateparks themselves had made a transition, as skaters turned designers.[43][60][61][62][63] Many new places to skateboard designed specifically for street skaters, such as the "Safe Spot Skate Spot" program, first initiated by professional skateboarder Rob Dyrdek throughout many cities, allowed for the creation of smaller alternative safe skate plazas to be built at a lower cost.[64] One of the largest locations ever built to skateboard in the world, SMP Skatepark in China, at 12,000 square meters in size, was built complete with a 5,000-seat stadium.[65]
Now venturing into making boards through a sister company Jamaica after running a line of them under their own Bronze name, Bronze has not slept after catching their first break of success. They recently collabed with Palace on a collection that instantly sold out, and have already dropped the successful first half of their collaboration with HUF. Keep an eye out for the second installment of that coming soon.

Founded by the pro skateboarder Marc Johnson in the year 2000, enjoi has been on the market for over two decades now. They have since expanded, and started producing skateboarding accessories and clothing apart from just skateboards. Since then, they have adopted a panda as their logo. This logo is featured on most of their products and has quickly become the company’s trademark.

Santa Cruz’s earliest videos Wheels of Fire (1987), Streets on Fire (1989), Speed Freaks (1989) A Reason for Living (1990) and Risk It (1990) are viewed today as paradigm-shifting releases which promoted interest in skateboarding globally by giving a platform to every kind of skateboarding that existed, from street and vert skating, through to the more niche genres such as slalom, downhill and freestyle, whilst at the same time retaining the aesthetic of skateboarding’s subcultural position in society.
We love Powell Peralta for a number of reasons as do all its customers but the foremost reason being its variety in terms of the skateboards that it manufactures. It has a collection of 30 different skateboard models, with a fusion of unique graphics and colors. They offer different skateboards that you can choose from, depending on your riding style, budget, body fitness and riding style.
The brand directs their concentration on towards freerides, carves, and downhill rides for all levels. Rayne offers one-offs and protos in their sales. The boards from Rayne in our observation can ride with double kicks, pushers, dancers and cruisers. You can entrust in the authenticity and progression of Rayne since their foundation dated back in 2004 and has not failed any of their fans.

From cheap skateboards to high end, custom complete skateboard decks, we have boards for riders of every skill level and tax bracket - we get it, we put skateboarding before everything else first. If you can’t always afford a new board, but go through decks like toilet paper, consider a CCS Skateboard - they cost less, but are manufactured in the same factories as other brands we carry. CCS Skateboards are held to the same standards as every skateboard we sell, but we can sell them for less.
Similar to sandpaper, grip tape, or “grip” as it’s commonly referred to, is applied to the top of your deck for traction. Grip gives you the friction you need to perform tricks such as ollies and kickflips. Not all grip tape is the same however. Each brand's products perform differently, so you may want to experiment with different brands to get a feel for what you prefer.
The deck is expertly constructed with a vertically laminated bamboo core and bamboo veneer exterior, all attached with triaxial glass and epoxy as well as a course grip tape top. The grip tape is arranged in an unusual and stylish, yet functional, design. The 34-inch board features a 13-degree nose angle and an 18-degree tail angle. With its directional shape, you’ll easily be able to cruise on this board or pull a few tricks.
×