Most skaters consider width is the most important dimension of the deck. That is measured straight across at the widest point of the deck. Skateboard decks generally range between 7.0 to 10.0 inches depending on the shape of the deck. There are boards that are narrower and wider than that, but they are not common and not practical for all around skating.
If you are looking to buy a reliable skateboard that will keep you busy for years to come, the Whitey Panda is the ideal choice. It’s a very good entry-level skateboard that can be put through a lot of wear and tear. The solid, metal skateboard trucks ensure that you will be kept sturdy and safe both on and off the ground. This helps the rider feels more confident when doing tricks, no matter where they are.
Originally referred to as sidewalk surfing, the birth of skateboarding dates back to the early 1940s and the use of wooden boxes with roller skates attached to their bottoms. While the board itself cannot necessarily be attributed to a single inventor of the time and was, instead, a spontaneous invention from multiple sources, the modern style of many of today's skateboards took form during the 1950s when California surfers were looking for a physical activity to keep them busy during times when the waves were flat. The first manufactured skateboards were ordered by a Los Angeles surf shop and were designed to be used by surf enthusiasts during their downtime. At the time, the shop owner set up an arrangement with the Chicago Roller Skate Company to produce sets of skate wheels, which the shop would then attach to square wooden boards.
Omar Salazar suffered a bad knee injury recently and was sidelined from skating, allowing him to refocus his energy into running his company, Doomsayers. Following the demise of Alien Workshop and facing an uncertain future in the industry, Omar decided to really focus on a brand whose image is not shy about its disdain for corporate greed, which many people blame for the demise of his long time sponsor.
Before Zoo York, Supreme, and 5Boro, New York had SHUT. For a short while, SHUT ruled, but soon the business fell out and founder Rodney Smith left to start Zoo York with Eli Morgan Gesner (who drew the original SHUT logo), and Adam Schatz. SHUT went dormant while the three men grew Zoo York into a successful business, and when they sold it off to Ecko in 2006, SHUT was reborn. The brand's flagship store resides on New York City's Lower East Side, so you can go witness skateboard history in person any time you want.
There really isn’t a best brand….I prefer boards that are made in America by small companies or for small companies by mid sized companies. but that’s my general preference Watson and PS Stix also makes boards for a lot of companies (mostly outside the USA from what I understand) I have a couple of Welcome Jordon Sanchez decks (pressed by PS Stix) on my spare board shelf that I can wait to skate.
Amazing! Great pop and amazing concave. Last for a long time as long as you don't get the bamboo board. They have an earthy style like element, but with a better board quality. The only reason they are not #1 is because they aren't as well known. You cannot snap these boards! I have skated them for a couple of years because they are so good. BUY ELEMENT BOARDS! You wont regret it.
In an industry as diverse as skateboarding, the sheer number of skateboard brands on the market can be bewildering. With a seemingly never-ending amount of new brands emerging, alongside the numerous pre-existing ones, the market can certainly appear over crowded and confusing at times, which is hopefully where this list of some of our favourite skateboard brands comes in.
There followed a video release containing a remix of archive footage of Glaswegian born ex Blueprint pro skater Colin Kennedy who was awarded a guest board by The National Skate Co in 2015 that referenced an earlier Irn Bru graphic of Kennedy’s released in 1996 during his time on Panic Skateboards. Additionally, The National Skate Co released another limited edition homage series of product to celebrate the classic 1997 UK video Playing Fields with the blessing of those involved in making the video originally.
If you are eager to have a new skateboard and need to take into consideration your budget, then Landwalker’s skateboard is the prefect board for you, based on personal preference. It’s by far one of the cheapest products on this list, while still giving you sufficient endurance and quality performance. Thanks to the high-density wood, you can rest assured that even if you fall, your skateboard will remain to be in one piece. Preassembled completes are ready to take out onto the road.
That Captain America-esque deck, though, is where the real magic happens. It uses Plan B’s Blk Ice tech, which means it’s lighter than your average board, stronger than standard 7-ply maple, and it’s built to slide and pop like no other without any need to add wax. This also makes it more consistent; no extra slippery or sticky spots, just a smooth ride.
That’s a lot of wood! But it is by no means the end. In 2016 there were many other brands that have pleased us with wooden works of art. Chocolate were inspired by modern living shown in their Modern Homes series, Welcome beautifully presented decks in original shapes, and the two German brands Inpeddo and Mob showed that seven layers do not necessarily have to come from overseas.
First off, it’s important to decide what you will be using your skateboard for and what you will be doing with it. That’s why it’s important to ask a few key questions: Are you going to be using it every day? Is it for a new hobby? Is it for competition practice? What surface will you be skating on? Will you be partaking in park skating, or street skating?
Grind King skateboard trucks are the best trucks available for grinding. The truck hangar is made from aluminum, making it softer and weaker, but better for grinding. This means you will have to replace them faster if you grind, but your grinds will be smoother and better. Grind King trucks do use special hex-head kingpins, so you will need a special tool to adjust them.
Camber & Rocker: The camber skateboards are the ones with a raised middle while rockers have dropped middle. The angle you get with camber and rocker is pretty mellow. However, the difference in shape dramatically affects the flex of your deck. Since most of the decks come with a neutral deck camber, you can still find some cruisers and longboards who feature a camber—style deck. Needless-to-say, decks having positive camber have more flex because of the higher center of gravity. In case of rocker decks, the center of gravity is low and have a sloped shape which the riders love.
Read on for our complete skateboard buyers guide where you can find things to consider when buying a beginner board, beginner skateboards for adults, ABEC ratings, Sizing Chart, and more about these epic extreme sports. Looking to go electric? Check our our review of the top electric skateboards! You could also try these top-rated electric longboards.
Finally, consider the type of grip tape you'll want on the board. While function is important in this regard to give your feet ample support, there's nothing wrong with adding some bling to the board's surface either. Many skateboard retailers will offer you several choices of grip tape and board styles, so it's definitely important to ask a lot of questions.
There is one question that one or another might have had in mind before: What is the best skateboard deck brand? Unfortunately, we don’t have a satisfying answer. But we did our very best and moved mountains by coming up with a very complex formula that takes sold decks, brand shop visits, search queries and lots of other fripperies into consideration to display a list of your favourite skateboard brands of 2017.
I really recommend searching up a local skate shop man. Get a shop deck instead of a company deck ya you look cool.with a gold primitive deck but all skateboards do the same thing.shop decks are much more cheaper With really good quality wood too, your shoe size don't matter at all my friend is 6' with a size 13 shoe and rides a7.75 lol. But the smaller the board the easier to flip the board with tricks. A more wider board gives you more room to land on doing stairs and gaps. Me i ride a8.25 i love it but at times i feel like riding an 8.1. Most local shops will give you a free sheet of griptape instead of wasting like 10$ on one. Trucks i recommend thunder hollow lights. They're so light on you skateboard and are durable. Hardware are the bolts that hold it all together i really like having colored ones so i can tell the nose and tail of the board. Wheels get spitfire man street tech formulas i love them so much about 25$ though. It's worth it tho. Bearings you can spit fire bearings too thet are ok but the more expensive the bearings the better. There's also bones red bearings another great bearing brand. In total cost bro it should come to around 120$ or just a slight bit more. For skate shoes always get sued shoes they last way longer and have better grip. To learn the basic tricks go to YouTube and look up braille skateboarding. He teaches you the basics very clearly and detailed where to put your feet and stuff. Not only that YouTube channel look at different skate videos youll get inspired to land that trick too. Skateboarding is sick bro no one tells you how to skate you know it's pure freedom. Hopefully you get a mean Ass setup man and get to skating!!! Remember skate or die !!!!
Toy Machine is an Ed Templeton company and one of the best skateboard companies of its time. Ed is an Orange County original skater and developed the board he wanted to skate on, thus creating the Toy Machine Brand. Though the Toy Machine team has seen many changes, it has always held onto professional skaters that can provide insight in the latest needs of boards. Toy Machine skateboards are known for their signature monster graphics, which have made them a top skateboard brand.
“We make 38 different proprietary shapes, and what is more important than the shape is the leverage that we design on each board. The mold we use, and where we drill on each mold is the magic. Do all popsicles ride the same? Of course not. We are a step beyond almost everyone with that because I am nerdy about how stuff rides and performs. This is what our riders skate and love, we aren’t trying to capture some demographic.
Powell Peralta has gained increasing popularity in the 1980s, when skateboarding became an increasingly more sought-after action sports. Since then, they have been developing skateboards tailored to customers, taking reviews and critiques into consideration every time they were building a new model. The Powell Golden Dragon is a direct result of such careful consideration and tailored-modeling.
Ever notice small vertical or horizontal cracks through your grip tape or by the hardware of your trucks? These are called stress or pressure cracks and are basically mini fractures of your skateboard deck that typically are seen in the areas of the deck that withstand the greatest impact (around the trucks). A few pressure cracks is generally no big deal and you won’t even notice them while skating, but they can compound and grow larger and make your deck lose “pop” and increase the chance of snapping. To avoid pressure cracks, you cant use riser pads underneath your trucks to reduce the level of impact your deck takes. You should also avoid over tightening your hardware and storing your skateboard in a very humid place as both of these practices can also make your board weaker and more susceptible to pressure cracks.
By raising £790,000, the Long Live Southbank initiative managed in 2017 to curb the destruction of a forty years old spot in London due to urban planning, a salvaging operation whose effect extends beyond skateboarding. The presence of a designated skating area within this public space keeps the space under nearly constant watch and drives homeless people away, increasing the feeling of safety in and near the space. The activity attracts artists such as photographers and film makers, as well as a significant number of tourists, which in turn drives economic activity in the neighborhood.