Most skaters consider width is the most important dimension of the deck. That is measured straight across at the widest point of the deck. Skateboard decks generally range between 7.0 to 10.0 inches depending on the shape of the deck. There are boards that are narrower and wider than that, but they are not common and not practical for all around skating.

Freestyle skating remained healthy throughout this period, with pioneers such as Rodney Mullen inventing many of the basic tricks that would become the foundation of modern street skating, such as the "Impossible" and the "kickflip". The influence that freestyle exerted upon street skating became apparent during the mid-1980s; however, street skating was still performed on wide vert boards with short noses, slide rails, and large soft wheels. In response to the tensions created by this confluence of skateboarding "genres", a rapid evolution occurred in the late 1980s to accommodate the street skater. Since few skateparks were available to skaters at this time, street skating pushed skaters to seek out shopping centers and public and private property as their "spot" to skate. (Public opposition, in which businesses, governments, and property owners have banned skateboarding on properties under their jurisdiction or ownership, would progressively intensify over the following decades.)[40][41] By 1992, only a small fraction of skateboarders continuing to take part in a highly technical version of street skating, combined with the decline of vert skating, produced a sport that lacked the mainstream appeal to attract new skaters.
The wheels of your skateboard can greatly affect your ride in numerous ways, such as the speed, your ability to take control of the skateboard’s movements, and what you feel while riding the board. The good news is that they come in various sizes, levels of durability, and colors, allowing you to pick one that suits your skateboard preference and style.
When you’re at the skate park or in a freestyle environment at a parking lot or structure, you want to have the most stability possible. You wouldn’t want your trucks cracking or a ball bearing spewing out during the landing of a nice front style 360 flip. If you’re in school, then choosing a skateboard brand for college while you’re away will be extremely easy given that this board is so very cheap and durable.

New in the top 16 ranking, but still an old stager in the business. In 2016 you gladly put Anti Hero decks under your feet, which is not surprising regarding the neat designs and the high quality of the boards. The brand stands for 100% skateboarding without high life and frills. It’s all about ripping it. Get your Anti Hero deck at skatedeluxe from 52.99 € | 45.00 GBP!


Aside from keeping the more fashion-oriented side of skateboarding placated with ultrasoft crewnecks and clean 6 panel caps, Dime keeps the side of skating focused on actual footage and hijinks fed through their Instagram and Snapchat accounts (@dimemtl), where they post their day-to-day in Montreal doing what skateboarders do best: having fun with their friends.
Serving skateboarding since 1976, we now offer the finest complete range of skate products in the world, handcrafted to serve skaters from their first skateboard to the top professional level. Our mission is to make the best skate equipment you can buy. If you don’t already know what you want, let us help you select the skateboard components that will enable you to take your skating to the next level. Whether you’re a first-time customer or a loyal fan, we’re proud to serve you.
Unlike California, where the sun always shines and the pavement has never seen snow and salt, New York only has a handful of skate brands. Funny when you think about the rich history skateboarding has in the City. 5Boro is one of the brands that has been keeping the tradition alive for more than a decade, and next time you see founder Steve Rodriguez out skating, thank him for making so much happen for skaters in NYC.
Quality wheels won’t mean much if you don’t have nice bearings which allow the wheels to spin freely on the axle of the skateboard truck. A quality set of bearings will spin well right away and actually get even better once broken in a bit. If quality bearings get dirty, they can typically be taken apart and cleaned relatively easily. A good set of bearings typically runs between $10 - $16.
When you’re searching for one of the best decks on the market, it’s important to not go overboard. You don’t need one that is made from the rarest wood or that has the most unique design. The best boards may be the ones that balance cost, design, and quality. After all, with healthy use, you’ll eventually have to replace your deck anyway. You want the one that will give you the most functionality and enjoyment while you use it.
SkateXS has been widely known to be the best brand for kids that are looking to advance their skateboarding skills. These skateboards have been designed with children in mind. That’s why there are many customizable features that you can pick when purchasing this product. If you are an avid skateboarder and want to introduce your kids to skateboarding, or just a parent that has been hearing about skateboards for weeks now, you can safely pick this product by SkateXs to help your kids safely advance in their skateboarding skills.

The core of the skateboard trucks is extremely lightweight, compared to the other skateboards we listed. They still sport a heavy-duty aluminum, but their initial design helps the skateboard be lighter and easier to pivot. It also arrives un-assembled which allows for the adult or child to have a sense of accomplishment when they put the board together. You will also be able to customize it to your heart’s content!
I rode for them as a ‘Amateur’ skateboarder in ‘79-’80, and they, at that time, had one of the Best boards out on the market, made of Fiberglass in a torsion box, with a foam core, and urethane ‘bumpers’ all around. I still have that board, and one set of C-70 Reds from then. I skated that gear hard, for many years, too. I still own 6–7 full sets of “krypto’s” for skateboards, and 8 that’re on quad-roller-skates. Great wheels, and they’re still in use.

A skateboard is fundamentally a sum of its parts. If you want a good skateboard, you’ll want each component to be high quality. We’ll take a look at each part of a skateboard and talk about what quality means for the that component. We’ll try to give tips on how to spot a high or low quality implementation of that component and then we’ll share how SkateXS Skateboards measure up.  

7.12"7.25"7.3"7.5"7.56"7.62"7.7"7.75"7.8"7.81"7.87"7.875"7.88"7.9"8"8.02"8.06"8.1"8.12"8.125"8.13"8.18"8.19"8.2"8.25"8.27"8.28"8.28"8.3"8.31"8.32"8.35"8.37"8.375"8.38"8.4"8.44"8.45"8.47"8.5"8.55"8.6"8.62"8.63"8.67"8.68"8.7"8.75"8.8"8.87"8.88"8.9"8.948.989"9.05"9.1"9.12"9.13"9.16"9.18"9.2"9.25"9.265"9.3"9.31"9.32"9.37"9.375"9.38"9.4"9.42"9.5"9.56"9.57"9.6"9.62"9.625"9.739.75"9.78"9.8"9.81"9.849.85"9.87"9.875"9.89"9.9"9.97"9.9810"10.1"10.2"10.25"10.34"10.37"10.5"11.2"11.75"


Moose boards are very solid in all categories. They are low priced, available in a variety of different shapes and sizes, and have been around for a while so they’ve built up a reputable brand name. You won’t go wrong buying a pack of Moose blanks if you’re the type of guy that goes through decks quickly or is looking to resell them at your local skatepark.
The nose and tail of a standard skateboard curve upward slightly to make tricks easier to perform. On most decks, the nose and tail are shaped slightly different. The nose is usually wider, longer and steeper than the tail which aids in nose-based (nollie) tricks, and also helps you differentiate the nose from the tail. Some shaped boards have very different nose and tail dimensions, and some old school boards lack noses all together.
Spotting a poorly made skateboard deck can be hit or miss. Some toy skateboards don’t even try to look “real". They might have no concave to their shape and may not even have a extended nose. Others may be shaped to resemble a real skateboard, but are made with cheap woods and fillers. If that is the case, they may be both thicker and heavier than a quality board, or they may be ready to fall apart quite quickly and easily. Consider that it isn’t easy to make a real skateboard deck. Most legitimate skateboard decks will sell for somewhere between $35 - $55. If you are paying that much for the entire skateboard, it is unfortunately a sign that significant corners were cut on quality. 
Omar Salazar suffered a bad knee injury recently and was sidelined from skating, allowing him to refocus his energy into running his company, Doomsayers. Following the demise of Alien Workshop and facing an uncertain future in the industry, Omar decided to really focus on a brand whose image is not shy about its disdain for corporate greed, which many people blame for the demise of his long time sponsor.
With distinctive graphics, often touching upon controversial issues such as racism with American society such as the infamous Jim Thiebaud ‘Lynch the KKK’ graphic designed by Natas Kaupas and Kevin Ancell, and classic Jeff Klindt graphics such as the James Kelch ‘James’ board, which was recently re-released, Real’s aesthetic has always been instantly recognisable.
I rode for them as a ‘Amateur’ skateboarder in ‘79-’80, and they, at that time, had one of the Best boards out on the market, made of Fiberglass in a torsion box, with a foam core, and urethane ‘bumpers’ all around. I still have that board, and one set of C-70 Reds from then. I skated that gear hard, for many years, too. I still own 6–7 full sets of “krypto’s” for skateboards, and 8 that’re on quad-roller-skates. Great wheels, and they’re still in use.
Toy Machine is an Ed Templeton company and one of the best skateboard companies of its time. Ed is an Orange County original skater and developed the board he wanted to skate on, thus creating the Toy Machine Brand. Though the Toy Machine team has seen many changes, it has always held onto professional skaters that can provide insight in the latest needs of boards. Toy Machine skateboards are known for their signature monster graphics, which have made them a top skateboard brand.
Whilst this A – Z is by no means exhaustive and there are many brands, both new and old that are not included, we feel that this cross section of companies represents a selection of some of the best choices out there today. The following list of 29 skateboard brands, beginning with Alien Workshop and ending with Zero, covers a huge range of the alternatives within the current market and will hopefully act as a handy guide to those dipping their feet into our world for the first time.
×