Skateboarding during the 1990s became dominated by street skateboarding. Most boards are about 7 1⁄4 to 8 inches (180 to 200 mm) wide and 30 to 32 inches (760 to 810 mm) long. The wheels are made of an extremely hard polyurethane, with hardness (durometer) approximately 99A. The wheel sizes are relatively small so that the boards are lighter, and the wheels' inertia is overcome quicker, thus making tricks more manageable. Board styles have changed dramatically since the 1970s but have remained mostly alike since the mid-1990s. The contemporary shape of the skateboard is derived from the freestyle boards of the 1980s with a largely symmetrical shape and relatively narrow width. This form had become standard by the mid '90s.[42]
In 1975 skateboarding had risen back in popularity enough to have one of the largest skateboarding competitions since the 1960s, the Del Mar National Championships, which is said to have had up to 500 competitors. The competition lasted two days and was sponsored by Bahne Skateboards & Cadillac Wheels. While the main event was won by freestyle spinning skate legend Russ Howell,[30][31] a local skate team from Santa Monica, California, the Zephyr team, ushered in a new era of surfer style skateboarding during the competition that would have a lasting impact on skateboarding's history. With a team of 12, including skating legends such as Jay Adams, Tony Alva, Peggy Oki & Stacy Peralta, they brought a new progressive style of skateboarding to the event, based on the style of Hawaiian surfers Larry Bertlemann, Buttons Kaluhiokalani and Mark Liddell.[32] Craig Stecyk, a photo journalist for Skateboarder Magazine, wrote about and photographed the team, along with Glen E. Friedman, and shortly afterwards ran a series on the team called the Dogtown articles, which eventually immortalized the Zephyr skateboard team. The team became known as the Z-Boys and would go on to become one of the most influential teams in skateboarding's history.[27][33][34]
In summary - recognizing a real skateboard isn’t rocket science, but it does take some amount of brand awareness and ultimately even trial and error. We tried to take the guesswork out of it by starting SkateXS and openly sharing and celebrating each and every component we use to build our skateboards. Hopefully we have been able to share the values and priorities we put into those design decisions. 
“We make 38 different proprietary shapes, and what is more important than the shape is the leverage that we design on each board. The mold we use, and where we drill on each mold is the magic. Do all popsicles ride the same? Of course not. We are a step beyond almost everyone with that because I am nerdy about how stuff rides and performs. This is what our riders skate and love, we aren’t trying to capture some demographic.
Skateboarding is thrilling as well as a very dangerous sport if not taken seriously. That’s why whenever you plan to ride a skateboard you must choose the best skateboard for a beginner. Being a beginner in skateboarding you get plenty of challenges in discovering your personal riding style. You can minimize various hassles by having the best skateboard for a beginner. For this reason, we have compiled a great in-depth guide for beginners to help them get started with this amazing journey of skateboarding. Making the best choice as a beginner can beat the odds of failing to ride or not having the best experience in skateboarding. Read on to find out.

The concave of a skateboard deck is how curved the width of the deck is.  Very few skateboard decks have no concavity and are completely flat as then they would break very easily and be hard to do flip tricks on.  Steep concave decks are the most study and best to do flip tricks on because the slope of the deck catches the skater’s toe or heel more easily and flips the board faster than a shallower deck.  Shallow concave boards are better for cruising around and vert skating as they are more comfortable on your feet and more controllable.  In practice, these recommendations are pretty general and it ultimately comes down to personal preference on the the best deck concavity.  But if you have no idea, following the recommendations or picking a board with moderate concavity is a good place to start.


Manufacturers started to experiment with more exotic composites and metals, like fiberglass and aluminium, but the common skateboards were made of maple plywood. The skateboarders took advantage of the improved handling of their skateboards and started inventing new tricks. Skateboarders, most notably Ty Page, Bruce Logan, Bobby Piercy, Kevin Reed, and the Z-Boys started to skate the vertical walls of swimming pools that were left empty in the 1976 California drought. This started the "vert" trend in skateboarding. With increased control, vert skaters could skate faster and perform more dangerous tricks, such as slash grinds and frontside/backside airs. This caused liability concerns and increased insurance costs to skatepark owners, and the development (first by Norcon, then more successfully by Rector) of improved knee pads that had a hard sliding cap and strong strapping proved to be too-little-too-late. During this era, the "freestyle" movement in skateboarding began to splinter off and develop into a much more specialized discipline, characterized by the development of a wide assortment of flat-ground tricks.
If you are looking for a skateboard that will provide you with all the necessary features you need to ride safely and efficiently, then the Punisher Butterfly Jive will be the perfect board for you. No matter if you want to give this skateboard to one of your kids or if you want it for yourself, it has the perfect size to fit just about anyone. This makes it very versatile, and is able to be used by nearly every age range.
Independent has been making skateboarding trucks for over 25 years. Independent's Stage 9 truck series are quality made, lightweight and still durable. They also feature "Fast Action Independent Geometry," which means they are designed to react more quickly to your motions than other trucks. Independent trucks are usually on the wider side, but all sizes are available. Independent trucks are also guaranteed for life against manufacturer defects but should last forever anyway.
Lewis Marnell became Almost’s first fully-fledged amateur, an addition announced in a bonus section of Almost’s ground-breaking mini ramp video ‘Almost Cheese and Crackers‘ from (2006) that focused upon Chris Haslam and Daewon Song’s pushing of the boundaries of mini ramp skating and has subsequently been credited with ushering in a new wave of technical transition skating in its wake.
Unlike California, where the sun always shines and the pavement has never seen snow and salt, New York only has a handful of skate brands. Funny when you think about the rich history skateboarding has in the City. 5Boro is one of the brands that has been keeping the tradition alive for more than a decade, and next time you see founder Steve Rodriguez out skating, thank him for making so much happen for skaters in NYC.
It has been our great pleasure to work with Cara-Beth Burnside and Mimi Knoop to introduce many girls to skating, encourage those who were devoted to it, and help craft careers for hoopla's amazing and wonderful team. We are proud of what we did together to further women's skating. The hoopla team was filled with amazing skaters, each a star and inspiration.

In this modern era, manufacturers are incorporating hi-tech processes and top-shelf materials into the construction of the skateboard. Companies such as Almost have several versions of hi-tech decks such as the Impact, Double Impact, and Uber Light Series. Element makes Highlight decks with inlayed fiberglass beams, and Foundation has its signature Fiberprime decks. Other manufactures such as Flip, Habitat, Plan B, Skate Mental, and Zero offer boards with high-end P2 Construction. Hi-tech decks differ from traditional 7-ply Maple in that they are inlayed with Carbon Fiber, Fiberglass, Poly Ply, or Kevlar to produce a stronger skateboard with more pop. For more options, head over to our stellar selection of Hi-Tech Decks! Although hi-tech decks have made a strong presence within the market, standard 7-ply Maple remain the gold standard. This is due to the solid feeling and pop afforded through layering 7 Maple wood veneers together. The large majority of skateboard decks offered are constructed of 7-ply Maple. Most board manufacturers offer both high-tech decks and standard 7-ply Maple. No matter what you desire, CCS offers a complete selection in multiple sizes, shapes, and construction types!


Thunder trucks are solid, with some great innovations. Thunder's light truck range claims ​to be the lightest available, with the quickest turning. Thunder's team is also pretty impressive, with Thomas, Appleyard, Marks, Steamer, Ellington. The list is actually pretty huge. If having a lot of pros ride the same trucks as you is important (which isn't a bad idea - these people are skating in competitions, and want the best!), then take a look at Thunder.
Our personal favorite is the Penny Australia Classic Complete Skateboard and trust me when I tell you this, it is the best skateboard for beginners. Hands down, we love how it is amazing to look at, very portable, excellent speed and has the greatest parts like hard wheels, 7 ABEC bearings and high tensile bolts. We love this board so much that it forms part of our best skateboards 2018 list as well.
There’s no way have never seen a Palace logo at this point, and if you haven’t that’s cause you shleep, bruh. Palace is one of the best out there doing the whole “high fashion or skate brand?” thing, and they hold a unique place on this list for being one of the few brands not based and started in the U.S. The Palace Wayward Boys Choir, like many before them, turned their group of friends into a successful crew of respected pros, who you will never see on Fox Sports 1 skating in a multi-million dollar contest.
The Skatro Mini Cruiser Skateboard includes Abec 7 Skatro Bearings, 59MM Urethane Skatro wheels, and 3-inch lightweight aluminum trucks.  The Skatro Flexy Technology ensures optimal flex on every board. Skatro outperforms most of the leading brands and it has an amazing value.  You can take this board on the subway, plane, train, and even on the bus.  It includes a color matching T-tool.  It has the best rating of 4.8 on Amazon.
Typically when looking at different completes you will see size dimensions in the format of ~7-8 x 31-34″.  This measurement is referring to the width and length of the skateboard deck.  Typically all other parts are relatively standard and the deck size is the main thing to look for.  Standard skateboard widths for beginners are between 7.5-8.25 with smaller boards being better for younger and smaller guys.  You don’t really have to worry about length much as long as it’s shaped regularly.  You may hear about the concave of the deck or a special type of board construction, but for the most part, it will not matter much to a beginner.  If you have no idea what size would be best you will never go wrong with a 7.5 or 7.75.
101187 Killer Pads5boroABC Hat Co.AceAdidasAlien WorkshopAlltimersAlmostAltamontAndaleAnti-HeroArborAtlasBacon SkateboardsBakerBearBenny GoldBernBirdhouseBlack LabelBlindBlood OrangeBlood WizardBLVDBonesBones BearingsBrixtonBro StyleBronson Speed Co.BulletCaliberCanalChocolateChrystie NYCCloud RideClub MidniteColours CollectivConverseCortina Bearing Co.CreateCreatureCrupieDark SeasDarkroomDarkstarDB LongboardsDC ShoesDeath LensDeathwishDGKDial Tone Wheel Co.Diamond Supply CoDickiesDietaDivineDOGDont CareDooksDoom Sayers ClubDustersElementEmericaEnjoieSEtceteraEthikaEtniesEvisenFancy LadFKDFlipFootprint

Independent has been making skateboarding trucks for over 25 years. Independent's Stage 9 truck series are quality made, lightweight and still durable. They also feature "Fast Action Independent Geometry," which means they are designed to react more quickly to your motions than other trucks. Independent trucks are usually on the wider side, but all sizes are available. Independent trucks are also guaranteed for life against manufacturer defects but should last forever anyway.
It is mainly because those items are guaranteed to help you familiarize yourself with the ins and outs of using them. They are a big help in making you feel comfortable when you push off with your feet while also balancing on top of the board when riding. It is not good to go for a very technical product, so it’s best to choose the mentioned types first.
The Krown Rookie Skateboard Complete 7.5 comes with thick, sturdy 7-ply maple wood deck. It gives you more control and permits you to perform various tricks. It features carbon steel ABEC-3 bearings, aluminum trucks, bushings and 54mm x 34mm wheels. This board is perfect for kids who are 8 years and older. It has a maximum weight capacity of up to 220 lbs.
Graphically speaking, Welcome is very distinctive, with an emphasis on hand drawn imagery and references to esoteric and occult themes mixed with bright colourways. Welcome Skateboards also offer a detailed shape guide on their website, detailing the exact dimensions of all of their 38 custom shapes, which again differentiates their product from many of the skateboard brands on the market.
If you are a beginner, the best thing you can do before you buy a board is to ask yourself what kind of skateboarding you want to do. Do you want to go cruising around a mostly flat area for fun? A longboard may be the best choice for you. Are you interested in learning tricks and stunts? A double-kick skateboard may be the best option. A classic skateboard is perfect for the rider that isn’t really sure what they want just yet.
If you decide that you don’t want to spend the money for a pro-quality complete, then this is your best bet for a completely blank skateboard.  You’re just not going to find anything else with similar quality anywhere near this price range.  This blank skateboard is an even 8″ with 9 layers of plywood in the deck.  This makes it ideal for any beginner especially adults or children with large feet.  A great option for someone on a budget or if you want to try a no-frills quality skateboard setup, before deciding if you want to invest further on a pro-style skateboard.
In 1976, skateboarding was transformed by the invention of the ollie by Alan "Ollie" Gelfand. It remained largely a unique Florida trick until the summer of 1978, when Gelfand made his first visit to California. Gelfand and his revolutionary maneuvers caught the attention of the West Coast skaters and the media where it began to spread worldwide. The ollie was adapted to flat ground by Rodney Mullen in 1982. Mullen also invented the "Magic Flip," which was later renamed the kickflip, as well as many other tricks including, the 360 Kickflip, which is a 360 pop shove-it and a kickflip in the same motion. The flat ground ollie allowed skateboarders to perform tricks in mid-air without any more equipment than the skateboard itself, it has formed the basis of many street skating tricks. A recent development in the world of trick skating is the 1080, which was first ever landed by Tom Schaar in 2012.[73][74]
Moose boards are very solid in all categories. They are low priced, available in a variety of different shapes and sizes, and have been around for a while so they’ve built up a reputable brand name. You won’t go wrong buying a pack of Moose blanks if you’re the type of guy that goes through decks quickly or is looking to resell them at your local skatepark.
Skateboarding was popularized by the 1986 skateboarding cult classic Thrashin'. Directed by David Winters and starring Josh Brolin, it features appearances from many famous skaters such as Tony Alva, Tony Hawk, Christian Hosoi and Steve Caballero. Thrashin' also had a direct impact on Lords of Dogtown, as Catherine Hardwicke, who directed Lords of Dogtown, was hired by Winters to work on Thrashin' as a production designer where she met, worked with and befriended many famous skaters including the real Tony Alva, Tony Hawk, Christian Hosoi and Steve Caballero.
Tensor trucks are the most highly engineered skateboard trucks on the market. Tensor trucks are like the Cadillac of trucks and have the brilliance of skateboarding legend / engineer Rodney Mullen as a driving force. Tensor trucks come in both standard and low designs, and should work excellently in most skateboarding situations. Sort of a perfect all-round well-built skateboarding truck.
Fox and Deacon re-branded Deathbox in 1991 as Flip skateboards and announced the four man team as consisting of Geoff Rowley, Rune Glifberg, Andy Scott and Tom Penny. After nearly being put out of business when a flood destroyed much of their stock, Fox, Deacon and the four team riders began to plan their move from the UK to Huntington Beach, California in order for the brand to grow further.
×