This is the way most serious skateboarders buy new skateboards.  In some cases they choose different brands for the wheels, bearings, trucks, deck, and hardware and customize it to their own unique style and preferences. The benefit to buying part like this you can replace only certain parts that are worn down and you have more control over each aspect of your skateboard.  I recommend this approach to intermediate and advanced skateboarders who want to experiment with different brands and styles.   However, if you are looking to try skateboarding for the first time or buy it as a gift for someone else I would recommend buying an already assembled complete skateboard.
There’s a bit of self-induced CONFUSION with Kryptonics inc. When they first came out, they made, literally, a Revolutionary Wheel, one that BOUNCED. That resilience made them VERY Fast on rougher surfaces, and perhaps even stickier (for a given hardness) than other wheels. You can buy that type of wheel (as a ‘Re-Issue’ “C-Series” in 55,60,65,70+75 mm sizes) now, and it’s STILL HIGH QUALITY, FAST, + STICKY! Even by today’s ‘longboard Race’ criteria, these are wheels to be reckoned with.
Let me tell you this, Santa Cruz has a huge variety of high quality everything-skateboard so naturally picking out the best skateboard of the best was a hard task. But as usual, we have a clear winner; the Santa Cruz Youth Land Shark Cruzer, Rasta. If you are a part of the skateboarding community, there is a high chance that you might have heard about this skateboard. Intricately crafted with the best quality materials, it is one of the best skateboards in town.
Modern decks are made with a composite of thin layers of either maple or bamboo pressed into a near symmetrical shape with a nose equal to or longer than the tail. The deck should be concave (subtle U shape) along the whole board with both the nose and tail angled upwards (the "kick" of the board). Conceptually while the skateboard is a platform, it also serves to cup the balls of the skater’s feet with rising sides, nose and tail providing the foundation for pretty much all modern skateboard tricks.
Another bonus of shopping at an actual skate shop is that you get to see what the boards look like in person. Most skate shops will have a cool wall of boards, and it's fun to just stand there and look at all the graphics. If one jumps out and grabs you, then you can ask the shop owner about the brand, and whether it's a good one. There's nothing wrong at all with buying a skateboard deck because you like the graphics!
It’s best to not go overboard with spending a lot of cash on your first skateboard. After all, it will take a lot of beating, and will surely be reduced to looking like a scratched plank of wood! Best skateboards to learn on include budget, beginner skateboards that offer you all the quality features a more expensive skateboard would, but at a lower expense. If you are new to skateboarding, it’s also recommended to get a skateboard with smaller wheels, since they go slower and are less intimidating!
A “razor tail” is the term for when the tail of the skateboard deck becomes sharpened and worn due regular use and scraping the tail of your skateboard on the ground to stop.  When your deck gets razor tail, its becomes a weapon against you and anyone need you while you’re skating as being hit with a sharpened tail is very painful.  To avoid this from happening, you could buy a carbon fiber deck that may be more resistant to wear, but more importantly you should not scrape your tail to stop.  Instead you can lightly place one foot or toe down to slow your speed or powerslide to a stop.
In terms of their skateboard output, Palace have released numerous videos online since their inception, including Gangbanging at Ground Zero (2011), Niggaz with Altitude (2013), a Danny Brady welcome clip ‘Definitely Brady‘ in 2014 and most recently, Very Nice in 2016 featuring newer team riders Shawn Powers and early viral internet star Jamal Smith. Palace are currently working on a full-length video.
These films have helped improve the reputation of skateboarding youth, depicting individuals of this subculture as having a positive outlook on life, prone to poking harmless fun at each other, and engaging in healthy sportsman's competition. According to the film, lack of respect, egotism and hostility towards fellow skateboarders is generally frowned upon, albeit each of the characters (and as such, proxies of the "stereotypical" skateboarder) have a firm disrespect for authority and for rules in general. Gleaming the Cube, a 1989 movie starring Christian Slater as a skateboarding teen investigating the death of his adopted Vietnamese brother, was somewhat of an iconic landmark to the skateboarding genre of the era.[citation needed] Many well-known skaters had cameos in the film, including Tony Hawk and Rodney Mullen, where Mullen served as Slater's stunt double.
The board also boasts of its reasonably small size and lightweight nature, making it easy to control and ride. In addition, carrying it wherever you want to go is also much easier because of its lightness. It is flexible enough that it can accommodate the needs of different kinds of users, including cruisers, travelers, beginners, expert riders, and kids.

This period was fueled by skateboard companies that were run by skateboarders. The focus was initially on vert ramp skateboarding. The invention of the no-hands aerial (later known as the ollie) by Alan Gelfand in Florida in 1976,[39] and the almost parallel development of the grabbed aerial by George Orton and Tony Alva in California, made it possible for skaters to perform airs on vertical ramps. While this wave of skateboarding was sparked by commercialized vert ramp skating, a majority of people who skateboarded during this period didn't ride vert ramps. As most people could not afford to build vert ramps, or did not have access to nearby ramps, street skating increased in popularity.

The board itself is actually very portable in the sense that it only weighs a modest four pounds. Which means you can jump on and off in any situation that may warrant you to walk or ride. The ABEC7 bearings are top quality bearings and of the highest class. Also accompanying all of these fine features comes the kick-tail end of the board. This is to ensure that maneuvering and tricks can be performed with this utmost of ease.
Ever notice small vertical or horizontal cracks through your grip tape or by the hardware of your trucks?  These are called stress or pressure cracks and are basically mini fractures of your skateboard deck that typically are seen in the areas of the deck that withstand the greatest impact (around the trucks).  A few pressure cracks is generally no big deal and you won’t even notice them while skating, but they can compound and grow larger and make your deck lose “pop” and increase the chance of snapping.  To avoid pressure cracks, you cant use riser pads underneath your trucks to reduce the level of impact your deck takes.  You should also avoid over tightening your hardware and storing your skateboard in a very humid place as both of these practices can also make your board weaker and more susceptible to pressure cracks.
We spent 43 hours on research, videography, and editing, to review the top options for this wiki. Whether you are an amateur or a seasoned pro, you'll find a skateboard among our selection that will have you doing everything from acid drops to wheel slides in no time. Or you can simply use one to get around town or to and from school. We've included models for younger riders through to adults, in styles and designs to match any taste, and at prices to meet any person's budget. When users buy our independently chosen editorial picks, we may earn commissions to support our work. Skip to the best skateboard on Amazon.
The magazine only lasted four issues, but resumed publication as Skateboarder in 1975.[16][17][18] The first broadcast of an actual skateboarding competition was the 1965 National Skateboarding Championships, which were held in Anaheim, California and aired on ABC’s “Wide World of Sports.[19][20] Because skateboarding was a new sport during this time, there were only two original disciplines during competitions: flatland freestyle and slalom downhill racing.[6]
Remember don't get those cheap skateboards from Walmart. They won't hold up to any skating and can break from a single ollie that is landed improperly. I know they are cheap, but 2 cheap boards a week for a few weeks adds up to the price of 2 or 3 expensive boards. These boards are also heavier and slow which makes them much more difficult to do tricks on.

SkateXS has been widely known to be the best brand for kids that are looking to advance their skateboarding skills. These skateboards have been designed with children in mind. That’s why there are many customizable features that you can pick when purchasing this product. If you are an avid skateboarder and want to introduce your kids to skateboarding, or just a parent that has been hearing about skateboards for weeks now, you can safely pick this product by SkateXs to help your kids safely advance in their skateboarding skills.
Destructo has some fancy skateboarding trucks. The Destructo raw series skate trucks come in low, medium and high designs and look oddly skinny. The Limited and Pro series trucks just look awesome, with simple pro signatures on the front and great color schemes. That's not to mention Destructo's "Rail Killer" series - these light trucks have extended baseplates to reduce wheelbite, and come in some incredible color schemes (including one using 24 karat gold!).
The growth of the sport during this period can also be seen in sales figures for Makaha, which quoted $10 million worth of board sales between 1963 and 1965 (Weyland, 2002:28). By 1966 a variety of sources began to claim that skateboarding was dangerous, resulting in shops being reluctant to sell them, and parents being reluctant to buy them. In 1966 sales had dropped significantly (ibid) and Skateboarder Magazine had stopped publication. The popularity of skateboarding dropped and remained low until the early 1970s.[7][25][26]
The skateboarding industry has changed so much in the last few years. Female skaters now get the support they need from bigger companies. I know hoopla helped pave the way for this to happen. It was so rewarding and surreal to have had such a rad team of girls represent hoopla over the years. I am stoked to have formed friendships with such a diverse and talented group.
Another bonus of shopping at an actual skate shop is that you get to see what the boards look like in person. Most skate shops will have a cool wall of boards, and it's fun to just stand there and look at all the graphics. If one jumps out and grabs you, then you can ask the shop owner about the brand, and whether it's a good one. There's nothing wrong at all with buying a skateboard deck because you like the graphics!
In terms of their skateboard output, Palace have released numerous videos online since their inception, including Gangbanging at Ground Zero (2011), Niggaz with Altitude (2013), a Danny Brady welcome clip ‘Definitely Brady‘ in 2014 and most recently, Very Nice in 2016 featuring newer team riders Shawn Powers and early viral internet star Jamal Smith. Palace are currently working on a full-length video.
If you are completely new to skateboarding, consider taking a minute to read through the Skateboard Decks Section in our Buyer’s Guide will be helpful, but a good rule of thumb is: the bigger your feet, the wider your board should be. If you wear a size 9 and up, you can’t go wrong with buying an 8” board. Narrow boards are easier to flip while wider boards are more stable, but there are no hard and fast rules to skateboarding. The only way to really find out what you like is by trying new shapes, sizes, and brands. Brands like Welcome, Baker, Chocolate, Deathwish, and Element all have a wide variety of sizes, shapes, and graphics.
×